Hier Node with character (e.g. 11100A) is not getting displayed in report

Hi All,
I have loaded the Finanacial Statement Version Hier in BI. It is perfectly loaded in the InfoObject 0GLACCEXT.
Some Hier Nodes contain charcters in the Node name like 1100A and 1100B and rest are all number like 1100, 1200, 11000 etc.
While I run the Report the Hier Nodes with nos (like 1100, 11000) are perfectly getting displyed in the report. But the Hier Nodes having the characters (like 1100A and 1100B) are not getting displayed into the Report and all the GLs under it are going into Unassigned node in the Reports.
Plz help me.
Regards,
Sandeep

Sandeep,
Your hierarchy is made up of characteristics with the values 1100, 11100A etc.
In your hierarchy is RSH1, does each node have the specific characteristic value Node 1
-1100
-11100A etc
Or is it a range i.e.
Node 1
1000 : 11100A
Regards
Gill

Similar Messages

  • Analysis Authorization based on Hier node with multiple display hierarchies

    Hi guys - I've got a problem where s.o. might have an idea of how to switch on the light at the end of the tunnel, I am currently standing in:
    Requirement:
    Cost Center Authorization should be given through RSECADMIN, reporting should be possible for any hierarchy that exists for the authorization relevant info object.
    Preferred solution:
    The Cost Center Analysis Authorization should be given through RSECADMIN - Hierarchy node assignment.
    u2022     A dedicated Authorization Cost Center Hierarchy will be maintained in ECC6 as an alternative cost center hierarchy and extracted into BW.
    u2022     The RSECADMIN Hierarchy node assignment should be based on a particular node (Type 2).
    u2022     The display level will be specified as required (here: Level 7)
    u2022     The Authorization granted should be independent of hierarchy name and version (validity 3).
    Reporting Scenario and technical impact:
    As mentioned above, when designing and running a query the user should be able to freely select other (i.e. than the authorization) display hierarchies for the authorization relevant reporting object 'Cost Center' as well. The technical names of the semantically relevant hierarchy nodes could therefore vary. E.g. cost centers 1, 2 and 3, being assigned under hierarchy node u2018Au2019 of the RSECADMIN relevant authorization hierarchy, could be subsumed by hierarchy node u2018Bu2019 in another display hierarchy, which the user may want to display in accordance to his reporting needs. Ideally, the alternative display hierarchy should therefore display node u2018Bu2019.
    My findings so far (based on prototyping) turn out that this is not possible as long u2018Bu2019 (and its hierarchy) is not authorized in RSECADMIN. Can these findings be confirmed? And if not, would anyone have an idea of how to facilitate the reporting scenario?
    Would there be any other way to grant access, possibly based on RSECADMIN single values, and also enable the user to flexibly display hierarchies with only those hierarchy nodes whose single cost center values the user has been given access to?
    Thanks everyone for your input...
    Claus
    Edited by: Claus64 on Jul 13, 2009 4:10 AM

    HI CLause,
    On Jul 14 2009, you wrote in SDN and said:
    FYI: Found a solution...
    The hierarchy analysis authorization will be based on a navigational attribute of cost center.
    With analysis authorizations it is possible to declare the Auth object (e.g. 0COSTCENTER__RACCAUT0) as authorization relevant and leave the superior object 0COSTCENTER auth irrelevant.
    The auth will be given for 0COSTCENTER__RACCAUT0. This object will be placed as a filter of the query, being restricted by an Authorization variable for hierarchy nodes.
    Due to the concept of Analysis Authorizations, this variable will automatically pick up the nodes granted as part of RSECADMIN Hierarchy based Authorization.
    As mentioned above, 0COSTCENTER as the regular reporting characteristic remains auth irrelevant and can therefore take any hierarchy thatu2019s available. Reporting on single values will be possible, too. Only those nodes show up that hold the authorized cost centers in accordance to the authorization.
    If the auth relevant 0COSTCENTER__RACCAUT0 is not used in the query definition by either not taking it in as a filter or skipping the Auth variable, the query will launch the message that the authorization is missing. No data show up at all.
    Claus
    See this thread:
    Analysis Authorization based on Hier node with multiple display hierarchies
    I am also in the same situation as you and need to understadn your solution. I understand that you created a Nav Attr on 0COSTCENTER and made this auth relevant whilst ensuring that 0COSTCENTER is NOT auth relevant. This is all fine. The issue was you have multiple hierachies for 0COSTCENTER, how did the new Nav Attr help you solve your issue. When loading 0COSTCENTER what values did you load ino the new Nav Attribute and how did that link to the hierachies? Also, in RSECADMIN you created hiearchy nodes based on the Nav Attribute but I am confused as to what values you have in the Nav Attr.
    I appreciate if you can share your solution from the past in more details.
    many thanks

  • I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI  inputs in the back.

    I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
    The receiver has two HDMI  inputs in the back.  However they say they are not for PC's.  Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables.  I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV.  But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
    My Email is [email protected] 
    Do you have any suggestions
    Thanks
    Bob

    I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
    Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
    Bob

  • Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11.  I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies.

    Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11.  I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it.  I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
    Error message is FAILED TO GET DISPATCH FROM IBRWSR2.  Then when you click on it the next error message says:  PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
    Does anyone have a solution since Adobe will not respond?
    As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI.  Any ideas?
    JimP08758

    It worked just fine for me.
    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache and
    * Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
    Type '''about:preferences'''<Enter> in the address bar.
    * '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
    * '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
    If there is still a problem,
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • After moving from my home country (Poland) to the Middle East (UAE) with the same computer I can not get connected to Apple Store and iTunes Store.

    After moving from my home country (Poland) to the Middle East (UAE) with the same computer I can not get connected to Apple Store and iTunes Store. Any clue why?
    Regards,
    Maciek

    Click the round flag icon bottom right corner of the App Store window.

  • When am trying to download acrobot standard its prompting with user login password and its not getting downloaded.

    Hi
    When am trying to download acrobot standard its prompting with user login password and its not getting downloaded.

    When you (or someone) first switched on your computer, you (or someone) had to choose a password. This protects your computer, and you need it to install most software or change the system. We can't help you if you forget it, sorry.

  • My blackberry tour does not sync my contacts anymore with outlook 2007. I do not get an error message. Help!!

    My blackberry tour does not sync my contacts anymore with outlook 2007. I do not get an error message. Help!!

    Norton is probably the issue. It can really screw things up, that is one reason I never use it. See if you can temporarily disable it and then try the sync and see if that works.
    On a Mac, there is a way to run a program that repairs permissions for the user, not a Windows thing.

  • Bought a TCL Roku TV. Connection with Macbook Pro through HDMI will not show display on TV. Have tried various options with no success. Suggestions/solutions?

    Bought a TCL Roku TV. Connection with Macbook Pro through HDMI will not show display on TV. Have tried various options with no success. Suggestions/solutions?

    You could try updating your apple TV and then restarting it. Bit of a guess.

  • I am using Vodafone at Delhi India with my Iphone 5S, 3g is activated with my number but i am not getting 3G signals iphone is also activated with vodafone but still waiting for 3G signals contacted vodafone but wasted my time pls help using APN www

    I am using Vodafone at Delhi India with my Iphone 5S, 3g is activated with my number but i am not getting 3G signals iphone is also activated with vodafone but still waiting for 3G signals contacted vodafone but wasted my time pls help using APN www

    Keep on talking to Vodafone and keep pestering them until you get a satisfactory answer.  Whether you get a 3G signal or not, is entirely the responsibility of Vodafone India because they are your carrier/phone company and nobody here can help you with that on a public user to user technical support forum.
    Contact Vodafone as they are the only ones who can help you.

  • I M HAVING TROUBLE WITH MY ILLUSTRATOR. mY TEXT IS NOT GETTING SELECTED

    I M HAVING TROUBLE WITH MY ILLUSTRATOR. mY TEXT IS NOT GETTING SELECTED

    supd,
    By the sound of it, ti could be View>Show Edges or View>Show Bounding Box,
    or it could be locked object(s)/Layer(s),
    or the text could be hidden within a Clipping mask or something.
    Have you tried (Alt/Option) selecting with the Direct Selection Tool?
    Have you looked into the relevant expanded Layer(s) in the Layers palette?
    What happens if you Select>Object>Text Objects?

  • Application deployed on one node is not getting displayed in second node

    Our environment is linux x86_64 and FMW version 11g,weblogic 10.3.4.0 ,soa 11.1.1.4.
    We have installed weblogic cluster :
    node1: Admin server,soa_server1
    node2:soa_server2
    when we deploy any soa application in one node it is not getting published in second node.We have taken oracle support also still problem is not solved.
    They told us to configure coherence ,we have taken owc from metalink .
    very urgent.
    Any one can help me.

    You have a cluster consisting of soa_server1 and soa_server2 or are these stand-alone WebLogic instances?
    Is soa-infra active on soa_server2?
    Can you check if soa-infra can be reached on both the server instances (http://hostname:port/soa-infra/)
    When soa_infra cannot be reached on soa_server2 can you check the logging to see what errors
    are occuring.
    Some examples that set-up a clustered envionment can be found here: http://middlewaremagic.com/weblogic/?p=6872
    and here: http://middlewaremagic.com/weblogic/?p=6637

  • Multi Lingual String not getting displayed properly with Java 1.5.4

    Hi,
    I have a strange problem and i think the problem is due to java 1.5.4.
    Problem is:
    My application was previously deployed on weblogic6.1 server and jdk used was 1.3.1
    After i migrated my application to weblogic 9.2 and started using jdk 1.5.4, i am not able to correctly view the data which is stored in different languages on browser.
    Some more details:
    OS - Linux.
    Database - Informix 9.2
    Intresting part is :
    If i enter a new multi lingual string from my application (deployed on WLS 9.2 with JDK 1.5.4) and store it in database, and then try to retreive it, it is displayed correctly.
    Issue arises only when the multi lingual string created and stored in database from my old application (deployed on WLS 6.1 with JDK 1.3.1) is retrieved and displayed in the new application (WLS 9.2 with JDK 1.5.4).
    Hope my issue is clear and if any one has any clue as to how to solve this issue. Kindly help

    One thread is enough.
    http://forum.java.sun.com/thread.jspa?messageID=9651015

  • Sale order with item category TAN not getting displayed in md04

    Hi,
    We have a sale order with item category TAN, Schedule line category CP, MRP type ND and availability check as 07. This is not getting reflected in md04. But item category TAB gets displayed under the PR number.
    Please let me know what checks to be made or changes to be done for the sale order with item category TAN to get displayed in md04 screen
    Thanks & Regards

    Hi all,
    I changed the MRP type to PD, and from the next sale order, line item onwards, it was getting displayed in md04 screen. The already created one anyway dint get reflected. So I had to delete the line item and create a new one.
    Thanks all for the help
    Regards,
    Jegashree

  • Sales order create/change line item with reference to contract - Open quantity not getting deducted for copied line item from the contract

    Hi friends,
    Please provide some valuable inputs for the following scenario:
    When a sales order line item is created(VA01) or changed(VA02) with reference to a Contract the open quantity is deducted in the contract which is a standard functionality. If the referenced line item is copied (custom enhancement to copy line item), then for the copied line item the open quantity is not getting deducted instead ATP quantity i.e. Available-to-promise is deducted.
    Any inputs on how we can fix this functionality i.e. deduct the open quantity from the contract for the copied line item?
    P.S. : Custom enhancement to copy line item is working fine, but open quantity is not getting deducted if the copied line item was referenced to a contract.
    Thanks,
    Sandeep
    Message was edited by: sandeep

    Sandeep,
    Yes, that was my original interpretation.  I was having a hard time believing that someone would ask such a question. 
    I guess, then, that you already know that you will have to add this logic to your enhancement. You should create your specifications and hand them off to a developer; ideally the one who created this enhanced solution in the first place.
    I do not provide advice in these forums about details of enhanced solutions.  Perhaps one of the other members will be more willing to do your work for you.
    Best Regards,
    DB49

  • TS4002 I had 2 iCould Accounts - one on MacBook Pro and one on iPad - long story.  I changed the one on my iPad to sync with laptop.  Now I can not get my iCloud mail on my iPad since it only want to set up a new one, not my existing one.  How do I fix it

    Hi:
    I had two iCloud account - one on my iPad set up with Me.com.  Its a long story as to why I had two account which I will not the issue.  I changed my iPad account to link up with my MacBook Pro account - which is my primary account.  After doing this all seemed OK except I could not get y primary iClould email account set.  When I tried to add my primary iClound email account it only allows you to add a NEW iClould account which is not what I want.
    How do I correct this issue?  Thanks.

    Thanks Winston but your solution did not work.  In my iCould account everything works except Mail - that being contacts, calendar, reminders, etc.  When it comes to mail it is currently OFF.  When I turn it ON, it states that I need to create a NEW free iClound account, and allowing me to establish my existing account. 
    When I tried your solution, it stated that the account already exists but in reality it is not on my iPad.
    Any more thoughts?

Maybe you are looking for