Hierachy Load error from R/3
Hi All,
I got an error while loading hierarchy from R/3 to BW. error is
<i><b>Diagnosis</i>
The hierarchy level of the parent node must be one larger than the
hierarchy level of the actual node. This is not the case for the node
with ID 00092826 and its parent node with ID 00092827 .
<i>System response</i>
<i>Procedure</i>
Correct the hierarchy level of the node or of the parent node in your
source system.
<i><b>Procedure for System Administration</b></i>
Can anybody help how to solve this error and where to correct this hierarchy in R/3.
This is an urgent issue.all my dependant loads are stopped due to this error.
Thanks in advance
Narendra.
Hi,
Refer Note 339453
Is this is the first time ?
Thanks
Assign points if useful
Similar Messages
-
Loading error from BI to Oracle
we are trying to connect to ABAP connector through OPEN HUB to Oracle.
a. a function module is called when we run the extractor to load data from BI to Oracle.
b. When the extractor is started it calls a function module.
c. When the function module is executed it opens a dialogue box asking if the data is deleted from the table.
d. This dialogue box is stopping us from doing a load.
I need the solution to suppress the dialogue box.
Thanks & Regards
Ramakanth.Hi
Thanks for your reply. Following are my settings in my interface.
Source : MS SQL Server 2K. It contains a table called sampleTable with two fields empId,empName .empId is the primary key. Under the Flow tab, I have selected LKM SQL to SQL
Target: Oracle 10g . It contains a table OracleTable with two fields empId,empName. empId is the primary key. In the Flow tab, I have selected IKM Oracle Incremental Update.
When I execute the interface it said Session started. When I open Operator, I found the following error under Sessions folder.
933 : 42000 : java.sql.SQLException: ORA-00933: SQL command not properly ended
java.sql.SQLException: ORA-00933: SQL command not properly ended
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
Where Can I see the code generated from the interface. Is it a PLSQL code?
Pls help me where I am doing wrong. -
Loading Error from CRM datasource - Info Idoc recieved with status 8
Hello All,
NEED YOUR HELP
We have a CRM datasource 0CRM_SALES_ACT_1 which works well from source in RSA3. The dataload is a full and fetches 19,000 records from CRM
However when we load it from an infopackage from BW it gives us the following "No data in source sysetm" Info Idoc with status 8. We have tried the following to eleminate some doubts
1) Checked the connection in SM59 using aleremote .Connection and authorization successful. Also loaded data in the BW system for other datasources from same CRM system it works well, so no authorization/ connections issues.
2) In the source system CRM tried transaction RSA3--> extract data get 19000 records
3) In the source system CRM Triied transaction RSA3--> Import Request from BW --> successful.
4) Checked the TRFC queue in SM58 the TRFC queue is empty
5) When we check the logs in CRM for ALEREMOTE we get the following message
synchronous transmission of info IDoc 2 in task 0001 (0 parallel tas
DATASOURCE = 0CRM_SALES_ACT_1
Current Values for Selected Profile Parameters
abap/heap_area_nondia......... 0
abap/heap_area_total.......... 9437184000
abap/heaplimit................ 40000000
zcsa/installed_languages...... ED
zcsa/system_language.......... E
ztta/max_memreq_MB............ 256
ztta/roll_area................ 3000000
ztta/roll_extension........... 2000000000
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 266228, Duration 00:00:00
IDoc: Start = 2008.10.22 14:18:38, End = 2008.10.22 14:18:38
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 266229, Duration 00:00:00
IDoc: Start = 2008.10.22 14:18:39, End = 2008.10.22 14:18:39
Job finished
*What is the issue ? Data is present and confirmed available in source system , yet we get 0 records in BW system ? WE NEED YOUR HELP *Hi
May be you need to provide full authorizations to the user 'ALEREMOTE'.Ask your basis team to check the authorizations.
Regards,
Chandu. -
Date load error From ODS to Cube?
Guru's,
Here is a status of data load and suggest me.
Actually we are loading data from ODS to Cube which is full load.This loading is done thorugh process chain and it is loaded for every half an hour.Every time the earlier load will be deleted and next load will be taken to cube.Two days ago the load had gone wrong.When I tried to see cause for the failure in Monitor details I could see Update missing and processing missing.When I see in process chains log view I got info stating some invalid characterstic had appeared.But when I search in PSA the whole of the data packets are green.If there is any invalid characterstics PSA should show a red status.But it is not showing.Please guide me how could I solve this?
point will be definitely awarded for the proper answers.
Thanks in advance.
vasu.Hi Vasuvasu
Once the edit is done and reloade the sata it wont show u the records in Red..
Hope itz Helps..!
Regards
KISHORE M REDDY
**Winners Don't Do Different things,They Do things Differently...!**
> I dont whink this is with Disk space Y because after
> every full load we are deleting data. -
I'm loading data into essbase from eis. After member load following error is given
EssbaseAPI: You have been logged out due to inactivity or explicitly by the administrator.
When I try the same thing using user 'admin' it works fine. but the error is observed for other users.
Is there any setting for the user not getting logged out.Could you explain how to solve this issue?
thanks in advance -
ERROR : "Exceptions in Substep: Rules" while loading data from DSO to CUBE
Hi All,
I have a scenario like this.
I was loading data from ODS to cube daily. everything was working fine till 2 days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error "Exceptions in Substep: Rules" after some package of data loaded successfully.
I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again "Exceptions in Substep: Rules".
Can any one tell me how to come out from this situation ?
Regards,
Komik ShahDear,
Check some related SDN posts:
zDSo Loading Problem
Re: Regarding Data load in cube
Re: Regarding Data load in cube
Re: Error : Exceptions in Substep: Rules
Regards,
Syed Hussain. -
Error when loading data from DSO to Cube
Hi,
After upgrading to 2004s we get the following error message when trying to load data from a DSO to a Cube:
Unexpected error: RSDRC_CONVERT_RANGES_TO_SELDR
Has anyone experienced a similar problem or have some guidelines on how to resolve it?
Kind regards,
FredrikHej Martin,
Tack!
Problem solved
//Fredrik -
Load error code 11 when attempting to open .vi from library
Hello,
Recently a colleague sent me a .llb containing a VI and sub-VIs of a program needed for my research. The VI opens correctly but none of the sub-VIs can be found by it and when I attempt to open the sub-VIs I get load error code 11: VI version (6.0) cannot be converted to the current Labview verstion (8.5.1) because is has no block diagram.
I am running Vista with 8.5.1 and attempting to open a library of version 6.0. I do not know what OS the library was compiled on. (Linux is a possibility) The colleague who sent me the program does not know either, as he recieved it from another colleague whom he is no longer in contact with.
I am fairly certain the library was saved with block diagrams, so I do not think that is the source of the error.
Does anyone know what might be a way to get these sub-VIs working?Okay,
File posted. Someone please tell me if this has a block diagram on it.
Attachments:
Find First Error.vi 24 KB -
Error while loading table from flat file (.csv)
I have a flat file which i am loading into a Target Table in Oracle Warehouse Builder. It uses SQL Loader Internally to load the data from flat file, I am facing an issue. Please find the following error ( This is an extract from the error log generated)
SQL*Loader-500: Unable to open file (D:\MY CURRENT PROJECTS\GEIP-IHSS-Santa Clara\CDI-OWB\Source_Systems\Acquisition.csv)
SQL*Loader-552: insufficient privilege to open file
SQL*Loader-509: System error: The data is invalid.
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
I believe that this is related to SQL * Loader error.
ACtually the flat file resides in my system ( D:\MY CURRENT PROJECTS\GEIP-IHSS-Santa Clara\CDI-OWB\Source_Systems\Acquisition.csv). I am connecting to a oracle server.
Please suggest
Is it required that i need to place the flat file in Oracle Server System ??
Regards,
Ashoka BLHi
I am getting an error as well which is similar to that described above except that I get
SQL*Loader-500: Unable to open file (/u21/oracle/owb_staging/WHITEST/source_depot/Durham_Inventory_Labels.csv)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
The difference is that Ashoka was getting
SQL*Loader-552: insufficient privilege to open file
and I get
SQL*Loader-553: file not found
The initial thought is that the file does not exist in the directory specified or I have spelt the filename incorrectly it but this has been checked and double checked. The unix directory also has permission to read and write.
Also in the error message is
Control File: C:\u21\oracle\owb_staging\WHITEST\source_depot\INV_LOAD_LABEL_INVENTORY.ctl
Character Set WE8MSWIN1252 specified for all input.
Data File: /u21/oracle/owb_staging/WHITEST/source_depot/Durham_Inventory_Labels.csv
Bad File: C:\u21\oracle\owb_staging\WHITEST\source_depot\Durham_Inventory_Labels.bad
As can be seen from the above it seems to be trying to create the ctl and bad file on my c drive instead of on the server in the same directory as the .csv file. The location is registered to the server directory /u21/oracle/owb_staging/WHITEST/source_depot
I am at a lost as this works fine in development and I have just promoted all the development work to a systest environment using OMBPlus.
The directory structure in development is the same as systest except that the data file is /u21/oracle/owb_staging/WHITED/source_depot/Durham_Inventory_Labels.csv and everything works fine - .ctl and .bad created in the same directory and the data sucessfully loads into a oracle table.
Have I missed a setting in OWB during the promotion to systest or is there something wrong in the way the repository in the systest database is setup?
The systest and development databases are on the same box.
Any help would be much appreciated
Thanks
Edwin -
Error while loading data from a text file to a datastore
Hi all,
i am a starter in ODI. I am trying to load data from a text file into a datastore. I have put the file on a unix server whose location is defined in the topology manager. when i am trying to "view data" it is giving me error file does not exist at <location where i have put the file>. Please help meHi,
1. If your files are on a remote File System, you will need to copy one of your files to the machine ODI Designer is running on to allow ODI to retrieve the metadata information of the file.
2. In Topology create a Physical Schema, the directory you enter for Data and Work Schema should point at this local file.
3. Then define the File Datastore in ODI Designer. Enter a name, browse and select the file and fill in each filed of the Files tab.
* If its a Fixed file, click on the grid icon on the Columns tab to enter the columns and have Automatic Adjustment checked.
* If its a Delimited file, use the Reverse button on the Columns tab to reverse the columns.
* Right click on the File Datastore select View Data, if you can view data, that means the File Datastore has been defined correctly.
* If not, check each tab of the File Datastore to make sure everything is defined correctly and retry.
4. Once View Data is successful, you now change the directories (Data and Work Schema in Topology) to point at the remote File System. These directories must be accessible to the ODI Agent that will be used to run the transformations. The directory can be an absolute path (m:/public/data/files) or relative to the ODI Agent startup directory (../demo/files). It is strongly advised to use a UNC (independent from the execution location) for the path. When running the transformations with "no agent", the directory is relative to the directory where Oracle Data Integrator has been installed.
You need to have a agent process running at the system where your source file resides .
Then while running the odi interface choose that agent .
Thanks,
Sutirtha -
Error while loading data from application server
Hi all,
Am facing a problem while loading data from application server.
The error i get is ....
*" The argument ' Rental/Lease ' cannot be interpreted as a number while assigning character to application structure*.
'Rental/Lease' is a value for a character infoobject length 30. I checked for the sequence of fields in data source and the sequnce of values am receiving in application server and the sequence match.
when i copy these values into a CSV onto a desktop and load,load is successful.
Please let me know your views.
Thanks&Regards,
PraveenIt looks like the system is trying to convert Rental/Lease to a number format. Is the info object type CHAR or NUMC or ??? I would look there.
Also, make sure / is in RSKC.
Brian -
Error while loading data from write optimized ODS to cube
Hi All,
I am loading data from a write optimized ODS to cube
I have done Generate Export Datasource
schedulled the info packge with 1 selection for full load
then it gave me following error in Transfer IDOCs & TRFC
Info IDOC 1: IDOC with errors added
Info IDOC 2: IDOC with errors added
Info IDOC 3: IDOC with errors added
Info IDOC 4: IDOC with errors added
Data packege 1 arrived in BW Processing : selected number does not agree with transferred number
Processing below is green
shows update of 4 new records to Datapackage 1.
Please provide inputs for the resolution
Thanks & Regards,
Rashmi.please let me know, What more details you need?
If I click F1 for error details i get following message
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
Thanks & Regards,
Rashmi. -
I started using JasperReports for my web application report generation. I'm using JSPs for web development.
I created a .jrxml file using iReport and used the following code to generate the report.
try {
JasperDesign jasperDesign = JRXmlLoader.load("C:\\tomcat\\webapps\\web\\JSP\\reports\\samples\\pmm-final.jrxml");
JasperReport jasperReport = JasperCompileManager.compileReport(jasperDesign);
// Second, create a map of parameters to pass to the report.
Map parameters = new HashMap();
parameters.put("Title", "JasperReport");
// Third, get a database connection
Connection conn = null;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
conn=DriverManager.getConnection("jdbc:odbc:driver={Microsoft Access Driver (*.mdb)};DBQ=C:/tomcat/webapps/db1/db1.mdb");
// Fourth, create JasperPrint using fillReport() method
JasperPrint jasperPrint = JasperFillManager.fillReport(jasperReport,
parameters, conn);
// You can use JasperPrint to create PDF
//JasperExportManager.exportReportToPdfFile(jasperPrint, "C:\\tomcat\\webapps\\web\\JSP\\reports\\TestReport.pdf");
JasperExportManager.exportReportToHtmlFile(jasperPrint, "C:\\tomcat\\webapps\\web\\JSP\\reports\\TestPMM.html");
JRXlsExporter exporter = new JRXlsExporter();
exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint);
exporter.setParameter(JRExporterParameter.OUTPUT_FILE_NAME, "C:\\tomcat\\webapps\\web\\JSP\\reports\\TestPMM.xls");
exporter.exportReport();
// Or to view report in the JasperViewer
//JasperViewer.viewReport(jasperPrint);
} catch (JRException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (SQLException e) {
// TODO Auto-generated catch block
e.printStackTrace();
The above pmm-final.jrxml uses a subreport 'top.jasper'. Error being thrown while loading top.jasper file. Error is as follows.
java.io.InvalidClassException: net.sf.jasperreports.engine.base.JRBaseReport; lo
cal class incompatible: stream classdesc serialVersionUID = 604, local class ser
ialVersionUID = 606
at java.io.ObjectStreamClass.initNonProxy(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:86
at net.sf.jasperreports.engine.util.JRLoader.loadObjectFromLocation(JRLo
ader.java:236)
at net.sf.jasperreports.engine.fill.JRFillSubreport.evaluate(JRFillSubre
port.java:295)
at net.sf.jasperreports.engine.fill.JRFillBand.evaluate(JRFillBand.java:
340)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillPageBand(JRVert
icalFiller.java:1224)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillPageHeader(JRVe
rticalFiller.java:353)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReportStart(JRV
erticalFiller.java:205)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReport(JRVertic
alFiller.java:119)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:
613)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:
483)
at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:77
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillMa
nager.java:248)
at org.apache.jsp.JSP.UserGuide_jsp._jspService(org.apache.jsp.JSP.UserG
uide_jsp:74)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
.java:325)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:2
95)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:214)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav
a:148)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:306)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:385)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:745)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.ja
va:675)
at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:868)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:684)
at java.lang.Thread.run(Unknown Source)
NESTED BY :
java.io.InvalidClassException: net.sf.jasperreports.engine.base.JRBaseReport; lo
cal class incompatible: stream classdesc serialVersionUID = 604, local class ser
ialVersionUID = 606
at java.io.ObjectStreamClass.initNonProxy(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:86
at net.sf.jasperreports.engine.util.JRLoader.loadObjectFromLocation(JRLo
ader.java:236)
at net.sf.jasperreports.engine.fill.JRFillSubreport.evaluate(JRFillSubre
port.java:295)
at net.sf.jasperreports.engine.fill.JRFillBand.evaluate(JRFillBand.java:
340)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillPageBand(JRVert
icalFiller.java:1224)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillPageHeader(JRVe
rticalFiller.java:353)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReportStart(JRV
erticalFiller.java:205)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReport(JRVertic
alFiller.java:119)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:
613)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:
483)
at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:77
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillMa
nager.java:248)
at org.apache.jsp.JSP.UserGuide_jsp._jspService(org.apache.jsp.JSP.UserG
uide_jsp:74)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
.java:325)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:2
95)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:214)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav
a:148)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:306)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:385)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:745)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.ja
va:675)
at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:868)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:684)
at java.lang.Thread.run(Unknown Source)
NESTED BY :
net.sf.jasperreports.engine.JRException: Error loading object from file : C:\tom
cat\webapps\web\JSP\reports\samples\top.jasper
at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:90
at net.sf.jasperreports.engine.util.JRLoader.loadObjectFromLocation(JRLo
ader.java:236)
at net.sf.jasperreports.engine.fill.JRFillSubreport.evaluate(JRFillSubre
port.java:295)
at net.sf.jasperreports.engine.fill.JRFillBand.evaluate(JRFillBand.java:
340)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillPageBand(JRVert
icalFiller.java:1224)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillPageHeader(JRVe
rticalFiller.java:353)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReportStart(JRV
erticalFiller.java:205)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReport(JRVertic
alFiller.java:119)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:
613)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:
483)
at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:77
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillMa
nager.java:248)
at org.apache.jsp.JSP.UserGuide_jsp._jspService(org.apache.jsp.JSP.UserG
uide_jsp:74)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
.java:325)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:2
95)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:214)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav
a:148)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:306)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:385)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:745)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.ja
va:675)
at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:868)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:684)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.InvalidClassException: net.sf.jasperreports.engine.base.JRBas
eReport; local class incompatible: stream classdesc serialVersionUID = 604, loca
l class serialVersionUID = 606
at java.io.ObjectStreamClass.initNonProxy(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:86
... 33 more
Anyone pls help. It's bit urgent. Thanks.I was using iReport v0.5.0 and it uses jasperreports-0.6.7.jar (v0.6.7) of
JasperReports. I compiled and i deployed my application in BEA weblogic server. I got the error listed below. Only after i saw your
response explaining that iReport was the issue, i checked the iReport lib directory and found this version of jasperreport jar.
iReport creates a java source file which is used to a jasper file.
iReport will link in the v0.6.7 version of jasperReports. When you
deploy your web application it will recognize this version through the compiled jasper file and give you the InvalidClassException, even
though you only have one jasperReport jar deployed with your war file.
The way i fixed this problem was to create my web application with the
jasperreport jar comes with iReport.
Thanks for mentioning iReport.
Christopher
Error:
Caused by: java.io.InvalidClassException: net.sf.jasperreports.engine.base.JRBas
eReport; local class incompatible: stream classdesc serialVersionUID = 607, local class serialVersionUID = 10002
at java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:463)
at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1521)
at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1435)
at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1521)
... -
Error while loading data from R/3 to PSA
Hi,
While loading data from R/3 to PSA i am getting error 'the argument 0.6 j cannot be interpreted as a number when assing application structure.Actually in R/3 0.6 and JPY are 2 different columns.So when loading J is getting concatenated with 0.6,so i think i am getting this error.
Hope i am clear.
please help me to resolve this issue.
Thanks in Advance,
GirishHi,
U have to go thru the note and chk/compare the settings with ur system...i.e packages, levels...
If not take the assistance from BASIS...
Note; And also all the notes may not be the exact note tht matches ur issue always...its jst a comparision within our system...If it doesn't solve our issue we have to search for another alternative...
rgds, -
I am getting error 205 while trying to install Creative Cloud. I already had chated with support, Uninstalled CC and tried to install it again. From the Adobe site, the page keeps loading eternally, from the previous installer, it gives me error 205. What to do? Give up on CC?
This is not the first time I get it, and it seems a recurring problem.Milliet are you on a managed network? If not then please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve error 205.
Maybe you are looking for
-
Issue: On a vanilla installation, the sandboxed code service (e.g. SPUCHostService.exe) is started; however, SPUCWorkerProcessProxy.exe and subsequently SPUCWorkerProcess.exe fails to start. Resolution/Workarounds attempted: Attempted 2 different Loa
-
Error while generating Absence Quota
Hi All, While generating Absence quota iam encountring an error message " No quota type for key 1 01 02 20090911" We are using Time Mgt Status 9 and RPTIME00. Can you pls share your inputs. Thanks for your time. Kind regards Sathya
-
Error installing Adobe XI Pro Trial
Hi. I keep getting this error while trying to install Adobe XI Pro trial version: The application cannot be installed due to a certificate problem. The certificate does not match the installed application certificate, does not support application up
-
Getting Too many objects match the primary key oracle.jbo.Key...
Hi, I am working on jDEV Version 11.1.1.2.0. In one of my page I am getting exception like "*Too many objects match the primary key oracle.jbo.Key......*". I have a Items EO and it's Child EO. I am using view criteria in Items VO and drag and dropped
-
Accidentally cleared Library in iTunes. Can it be recovered?
I accidentally had my library cleared in iTunes and I was wondering if it can be recoverable? All my files are scattered around so it will take time to re-add them. I do have Norton Erase Protection on my Recycle Bin so it would recover any deleted f