Hierarchical View from STS

Hi
As an planning coordinator, when he launch the STS, he will sees the Hierarchical View from the overview page first, if he need to see the status of each node, he have to open each sub-node one after another, currently it take about 40 seconds to open one node,there are 10 levels in our Hierarchy, it will take 400 second to get to the lowest level, this is not acceptable, anybody know a better way to improve the performance?

Hi Toshias,
What do you mean by "Do you use the new STS functionality of BW 3.5/SEM4.0"?, we are now using BW 3.5.
since our hierarchy is kind of large, it take 40 second to open one level of node, while in STS you can only open one level of node after another, that's why it take long time to get the the lowest level.

Similar Messages

Right Click Implementation on Hierarchical Viewer

Hi all
I'm developing a web app using jdeveloper 11.1.1.4
I have implemeted a Hierarchical Viewer controller and works fine. I need ti implement adding node by right click on a node and selecting a menu.
Pls tell me how to do this. Can we implement right click even on Nodes in Hierarchical Viewer
Tx

Check this link from the Web user developer's guide:
http://download.oracle.com/docs/cd/E21764_01/web.1111/b31973/dv_hviewer.htm#BGBDFFHE
Thanks,
Navaneeth

BAPI Hierarchical View

Dear Abapers:
A custom object type Z**** which is created and released from SWO1 and it works absolutely fine. However, the issues is it gets listed in the Alpabethical order only but not in the Hierarchical view. I have searched the entire list but unable to find it.
How do i solve this problem.
How can I add my object type to the hierarchical list?
Moderator Message: Priority level removed and thread unlocked.
Edited by: kishan P on Feb 1, 2012 5:03 PM
Edited by: kishan P on Feb 1, 2012 6:59 PM

Even i've faced this issue. Anybody has an idea on how to resolve this?

Can not select from data dictionary view from a procedure

Hi,
I wonder, which privilege is missing here:
my schema has this roles and privs:
GRANT CONNECT, RESOURCE TO cb ;
GRANT CREATE SESSION TO cb ;
GRANT SELECT_CATALOG_ROLE TO cb ;
GRANT CREATE SYNONYM TO CB;
GRANT CREATE VIEW TO CB;
I create a procedure:
create or replace procedure dd_test as
begin
     dbms_output.enable(2000000);
     for r in (select table_name from sys.dba_tab_partitions     where owner = 'CB') loop
               dbms_output.put_line(r.table_name);
     end loop;
end;
sho err
4/38 PL/SQL: ORA-00942: table or view does not exist
When I run the core statement form sql prompt, it works !
so what privilege is missing here ???
thanks for any hint, Lao De

Hi,
thanks for that reply, after doing that I can not select this DD-view from sql-prompt anymore (which I don't wonder ;-). Can you tell me, what idea you had behind that test ?
I found another instance, where the procedure works and I will compare those privileges, but it's hard to sort out that complex structure of nested roles and sys_privs.
How ever, I will update here, when I found the missing privilege.
regards LaoDe

How to call a maintenance view from a program

Hello Abapers,
Can anybody explain with some examples. How to call a mainetenance view from a program.
Thanks
Ranjith.

Use FM 'VIEW_MAINTENANCE_CALL'.
REPORT zmaintaintest.
VARIABLES / CONSTANTS
CONSTANTS:
                c_action(1) TYPE c VALUE 'U',                                 "Update
          c_viewname TYPE tabname value 'ZEMP_EXAMPLE', "View Name
          c_field(6) TYPE c VALUE 'EMPNO'.                            "Field Name
INTERNAL TABLES
DATA: itab_rangetab TYPE STANDARD TABLE OF vimsellist,
          v_empno TYPE zempno,
          wa_rangetab TYPE vimsellist.
SELECTION SCREEN
PARAMETERS:     p_empno TYPE   zempno   OBLIGATORY. "Emplyee ID
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
Chcking the existence of the user in EMPLOYEE table
PERFORM validate_employee.
START_OF_SELECTION
START-OF-SELECTION.
This will restrict the user view so that user can only view/change
Table data corresponding to his/her Employee ID
PERFORM define_limited_data_area.
Displaying table maintenance view for a particular employee ID
PERFORM call_view_maintenance.
*&      Form validate_employee
Validate plant entered in the selection screen
FORM validate_employee.
SELECT SINGLE empno     u201CEmployee ID
    FROM zemp_example     u201CEmployee Table
    INTO v_empno
    WHERE empno = p_empno.
IF sy-subrc <> 0.
    MESSAGE 'Not an Valid User' TYPE 'I'.
ENDIF.
ENDFORM.                    "validate_employee
*&      Form DEFINE_LIMITED_DATA_AREA
To restrict the user view so that user can see/change table data
corresponding to his employee ID. Here one internal table is
getting populated with field name as u201CEMPNOu201D (Key field of the table)
And value as given by user in Selection Screen and this is passed as
Parameter in function module 'VIEW_MAINTENANCE_CALL'
FORM define_limited_data_area.
CLEAR wa_rangetab.
wa_rangetab-viewfield = c_field.
wa_rangetab-operator = 'EQ'.
wa_rangetab-value       = p_empno.
APPEND wa_rangetab TO itab_rangetab.
ENDFORM.                    "define_limited_data_area
*&      Form CALL_VIEW_MAINTENANCE.
Displaying table maintenance view for a particular employee ID
FORM call_view_maintenance.
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
    EXPORTING
      action           = c_action
      view_name   = c_viewname
    TABLES
      dba_sellist     = itab_rangetab.
ENDFORM.                    "call_view_maintenance
Regards,
Joy.

No Data in Field Scrap quantity (AMGLG) after Append DataSource 2LIS_04_P_COMP (Component View from PP/PP-PI)

Hi experts,
we enhanced the BI Content standard DataSource 2LIS_04_P_COMP "Component View from PP/PP-PI" with the field AMGLG (Scrap quantity) per maintenance of the relevant extract structure MC04P_0COM via LBWE:
The enhancement of the extract structure worked fine.
Unfortunately the enhanced field is not filled after the Statistical Setup of the LIS Application 04 "Production" (t/code OLI4BW).
RSA3 -> 2LIS_04_P_COMP:
Any ideas or experiences?
Many thanks in advance and regards,
Michael

Attached one example:
BW DataSource 2LIS_04_P_COMP:
ERP Summarized BOM Multilevel (t/code CS13) Component 456:
ERP Summarized BOM Multilevel (t/code CS13) Component 301:
Any ideas why there are no values for the field AMGLG extracted?
Thanks and regards,
Michael

SharePoint 2013 List View with query string filter stops working after editing view from browser

I have created one list definition in which I have added one list view which will filter data from query string paramater
So when I am creating list from my list definition, view with query string filter is working fine.
But when I am modifying view from UI(I am not changing any thing , just opening "Modify View" page and then click on "Save" button), view gets stop working means it's not filtering data based on query string
Any suggestion what I am missing?
Below is my list view schema
<View BaseViewID="11" Type="HTML" TabularView="FALSE" WebPartZoneID="Main" DisplayName="$Resources:OIPLBScoreCard,viewFilterTasksByTarget;" MobileView="True" MobileDefaultView="False" Url="FilteredTasks.aspx" SetupPath="pages\viewpage.aspx" DefaultView="FALSE" ImageUrl="/_layouts/15/images/issuelst.png?rev=23">
<Toolbar Type="Standard" />
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
<ParameterBinding Name="TargetId" Location="QueryString(TargetId)" />
</ParameterBindings>
<JSLink>hierarchytaskslist.js</JSLink>
<XslLink Default="TRUE">main.xsl</XslLink>
<JSLink>clienttemplates.js</JSLink>
<RowLimit Paged="TRUE">100</RowLimit>
<ViewFields>
<FieldRef Name="Body"></FieldRef>
<FieldRef Name="Title"></FieldRef>
<FieldRef Name="StartDate"></FieldRef>
<FieldRef Name="DueDate"></FieldRef>
</ViewFields>
<ViewData>
<FieldRef Name="PercentComplete" Type="StrikeThroughPercentComplete"></FieldRef>
<FieldRef Name="DueDate" Type="TimelineDueDate"></FieldRef>
</ViewData>
<Query>
<Where>
<Eq>
<FieldRef Name="oipscTargetLookup" LookupId="TRUE"/>
<Value Type="Lookup">{TargetId}</Value>
</Eq>
</Where>
</Query>
</View>
I have one lookup field from "Target List" in my source list and I want to filter data based on that lookup field.

Hi JayJT,
The Miscellaneous is located in the contact list that you used for the connection.
So , you need to edit the page, then edit the contact list that you used, in the web part properties of the contact list, you will find Miscellaneous, then expand it and select ‘Server Render’ .
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Re: [iPlanet-JATO] Re: onBeforeRequest(); Finding requested view from requestContext

If you want to stop a JATO request in its tracks, you have a little black
magic at your disposal: you can throw a CompleteRequestException. This
indicates to the JATO infrastructure that it should immeditately stop
handling the request, but not generate an error, as the develper has taken
full control. You can generally throw this error from anywhere, at any
point--it is a RuntimeException, and is "tunneled" through other exception
handlers where appropriate.
In your scenario, you want to check if the user is logged in, and if not,
save the target URL using the parsePathInfo() method. Then, forward to the
login page and then throw a CompleteRequestException.
Todd
----- Original Message -----
From: "nickmalthus" <nickmalthus@h...>
Sent: Monday, January 07, 2002 3:05 PM
Subject: [iPlanet-JATO] Re: onBeforeRequest(); Finding requested view from
requestContext
I guess what I am thinking about doing is capturing the requested URL,
i.e. /appname/modulename/RequestName. In the onBeforeRequest(). I
would then check to see if the user is logged in, and if not, set the
URL in the session(or page session of the Login bean) and forward to
the Login viewbean using the viewbean manager. Inside the login view
in the handleSubmit() method I would authenticate the user and then
get the URL out of the session (or pagesession). I would then
magically get the ViewBean/Command object for the URL or otherwise
"forward the request" as if the user had typed in
/appname/modulename/RequestName, which is the behavior I am trying to
acheive.
It turns out I cannot forward in the onBeforeRequest() as it will
output the viewbean and then continue to process the request which in
turn trys to do a RequestDispatcher().forward after data has been
written to the stream which does not bode well with the servlet
container. Thus, it appears I have no control of the request in the
onBeforeRequest() method. Is this correct?
In light of this new observation I am now going to create a base view
class that all views will extend from and override the
onSecurityCheck() method to forward to my login bean. If I can't find
any other way, I will get the URL from the page session and do a
response.sendRedirect() to the URL.
Thanks for the help!
--- In iPlanet-JATO@y..., "Craig V. Conover" <craig.conover@s...> wrote:
The problem is that you don't know what the target view is until it has
been forwarded to.
Think about it... the request handling view bean (or command object)has
the request handler that has the code that will ultimately forward to
another view bean. This is code that you have written. So, until that
forwardTo() is invoked, there is no notion of a "target page".
What you do know is which "page" (view bean) the request is coming from
(the handling view bean or command class). You can get this from the
HttpServletRequest. The attribute name is "viewBean".
So you can get the view bean name by doing the following inonBeforeRequest:
<HttpServletRequest>.getAttribute("viewBean");
But I suspect this is not going to solve your current issue.
You could add the target page name to the page session. If there ismore
than one possible target page, it might get a little more involved.
Let me know if the use of page session needs further explanation.
c
For more information about JATO, including download information, pleasevisit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

If you want to stop a JATO request in its tracks, you have a little black
magic at your disposal: you can throw a CompleteRequestException. This
indicates to the JATO infrastructure that it should immeditately stop
handling the request, but not generate an error, as the develper has taken
full control. You can generally throw this error from anywhere, at any
point--it is a RuntimeException, and is "tunneled" through other exception
handlers where appropriate.
In your scenario, you want to check if the user is logged in, and if not,
save the target URL using the parsePathInfo() method. Then, forward to the
login page and then throw a CompleteRequestException.
Todd
----- Original Message -----
From: "nickmalthus" <nickmalthus@h...>
Sent: Monday, January 07, 2002 3:05 PM
Subject: [iPlanet-JATO] Re: onBeforeRequest(); Finding requested view from
requestContext
I guess what I am thinking about doing is capturing the requested URL,
i.e. /appname/modulename/RequestName. In the onBeforeRequest(). I
would then check to see if the user is logged in, and if not, set the
URL in the session(or page session of the Login bean) and forward to
the Login viewbean using the viewbean manager. Inside the login view
in the handleSubmit() method I would authenticate the user and then
get the URL out of the session (or pagesession). I would then
magically get the ViewBean/Command object for the URL or otherwise
"forward the request" as if the user had typed in
/appname/modulename/RequestName, which is the behavior I am trying to
acheive.
It turns out I cannot forward in the onBeforeRequest() as it will
output the viewbean and then continue to process the request which in
turn trys to do a RequestDispatcher().forward after data has been
written to the stream which does not bode well with the servlet
container. Thus, it appears I have no control of the request in the
onBeforeRequest() method. Is this correct?
In light of this new observation I am now going to create a base view
class that all views will extend from and override the
onSecurityCheck() method to forward to my login bean. If I can't find
any other way, I will get the URL from the page session and do a
response.sendRedirect() to the URL.
Thanks for the help!
--- In iPlanet-JATO@y..., "Craig V. Conover" <craig.conover@s...> wrote:
The problem is that you don't know what the target view is until it has
been forwarded to.
Think about it... the request handling view bean (or command object)has
the request handler that has the code that will ultimately forward to
another view bean. This is code that you have written. So, until that
forwardTo() is invoked, there is no notion of a "target page".
What you do know is which "page" (view bean) the request is coming from
(the handling view bean or command class). You can get this from the
HttpServletRequest. The attribute name is "viewBean".
So you can get the view bean name by doing the following inonBeforeRequest:
<HttpServletRequest>.getAttribute("viewBean");
But I suspect this is not going to solve your current issue.
You could add the target page name to the page session. If there ismore
than one possible target page, it might get a little more involved.
Let me know if the use of page session needs further explanation.
c
For more information about JATO, including download information, pleasevisit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Design view and browser view in DW are different than when I view from local folder

I'm brand new to Dreamweaver CS5.5 and here is my problem:
I've made an html page in dreamweaver with a banner, with an additional graphic and some text on top of the banner. It displays just fine in every browser when I view from the local folder, but when I open DW and view, it displays incorrectly in all three design, live and browser views within DW. If I make changes to the css file until it views correctly in design view, it no longer displays correctly from the local folder and it still doesn't view correctly in live or browser view within DW. If what I'm doing isnt going to display accurately in any of the views provided by Dreamweaver as compared to the live server, whats the point in having this software? I could just keep building webpages in notepad and uploading with CoreFTP.
Any suggestions? Is it some setting that I dont know about that I need to change within DW? Please help.

align="center" is deprecated (obsolete) code in XHTML & HTML5 doc types. Instead of styling markup with HTML, you should be using CSS.
CSS
.center {text-align:center}
HTML
<p class="center">some centered text here</p>
With respect to break tags, in XHTML doc types the correct syntax is <br /> not <br>. However your usage of line breaks is inconsistent with good symantic markup. Use headings <h1> <h2> <h3> <h4> for important keywords. Use <p> for descriptive paragraphs. Use <ul> <li> or <ol> <li> for lists. Line breaks should be used minimally if ever.
XHTML doc types require all tags to be lowercase. Uppercase tags will throw errors.
Your design is too rigid. When text size is increased in browsers, your content is unreadable. See screenshot.
SOLUTIONS:
1) DO NOT USE POSITION ABSOLUTE. You don't need it. Absolute positioning removes content from the normal document flow resulting in a jumbled mess. Use default CSS positioning (none) with margins, padding & floats to align elements.
2) Remove HEIGHT values from all CSS containers. Height limits a container's capacity to hold more content when needed. Container height should always be determined by the amount of content it holds; not explicit values. If required to reveal a background image, for example, use CSS min-height instead of height.
CSS Box Model
http://www.w3schools.com/css/css_boxmodel.asp
CSS Floats
http://www.w3schools.com/cssref/pr_class_float.asp
CSS min-height
http://www.w3schools.com/cssref/pr_dim_min-height.asp
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

How to call a view from another

Hello Experts,
        I have embedded a view (let us call this view 'A') in standard homepage. This works fine. Now on click of a button on this embedded view I want to launch another view that is also created by me, in the same component in which I had created view A. But I do not know how to launch this second view
     Could you please tell me how to call/launch a view from another on click of a button?
Regards,
Prafful

Hello Prafful,
I guess by launching you mean substituting one view by another. It can be achieved by declaring a navigational link in the runtime repository from one view to another. You have to create an event handler on the button and outbound plug in your view using the wizard. Then, on the event handler you call an outbound plug where you trigger a navigation using this navigational link and the view A will be replaced by view B.
A code which needs to be done in outbound plug:
me->view_manager->navigate(
source_rep_view = me->rep_view
outbound_plug   = 'NAVLINKNAME'
data_collection = iv_data_collection ).
Best Regards,
Yevgen

No data found in the discoverer Viewer from Apps responsabiltiy

Hi
We have built a new responsibility for the discoverer reports, that is we directly access the discoverer viewer from the separate responsibility,all the report that shared with the users can be viewed from this responsibility,
but when the user tries to run the report it is saying no data found.but for example if the user is trying to run the hrms report from this discoverer reasonability he get no data found but if we attach the function to the HRMS manager menu and try to access the report from the HRMS manager responsabilty we are able to get the data.
We did the same setup in dev and test.in dev it is working very fine but in test we are not able to see the records in the report if we try to access.
Please advice
thanks
Regards
Ramesh Kumar S

Hi,
I'm not 100% familiar with HR security, but sounds like profile option setup related to security - perhaps Business Group or Initialization SQL Statement - Oracle / Custom? Check the profile options set for the HRMS Manager responsibility and setup the same for your new responsibility.
PS. Similar sort of thing exists in General Ledger related to security. See:
GL security issue in discoverer..
Regards,
Gareth

Not able to export web analysis report to excel smart view from workspace

Not able to export web analysis report to excel smart view from workspace.
Error :Web launch operation has been cancelled.
Can anyone help me to resolve this issues

I realized that I can put a block in WebI and then I can pull that in excel alongside of static header, after putting the question.
My interest to know whether it is by design in XI 3.0 or it is an issue. But by the replies it seems to me like it is by design.
@Anis: I can't go for header as part of Body. Because this report is viewed in Web by many other users. I can't have separate report for Live office, it is a restriction for me. If I use the header in body, it wont look good I guess.

Crystal report viewer from portlet

Hi,
I have a problem with opening Crystal report viewer from portlet. I am using Spring portletMVC but this doesnt matter in this case. After clicking some button a controller process form in method where is access to ActionRequest, ActionResponse. But how can I "redirect" with some parameters to plain JSP page where I can write something like this:
CrystalReportViewer viewer = new CrystalReportViewer();
     viewer.setReportSource(rcd.getReportSource());
     viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
     viewer.dispose();
Oh, perharps is understandable, sorry for my English and thanks for helping. Any code of link would be wonderful.

I haven't worked with Crystal Reports in quite awhile, but in the past I've written code to launch Crystal Reports using OLE. If I recall correctly, there existed an ActiveX control that could be embedded into VB forms, and the like. I'm unsure, however, whether they continue to support this mechanism. Given that your requirements do not allow CLIENT_HOST or DDE, however, I am guessing that OLE automation would also be unacceptable.
Have you looked at WEB.SHOW_DOCUMENT?
Eric Adamson
Lansing, Michigan

How to refer one view from another view?

Hi,
I have 2 views in my Adobe Flash Builder mobile app. I need to refer the first view in my second view.
How to refer one view from another view? Or how to create a reference to a view wherever needed?

I don't need any data from my first view. In a certain flow, I need to make my first view to be invisible.
for eg., My First view is in portrait mode. I change the device to Landscape. In the landscape mode, I want to show a completely different view (second view).
In this case, what happens is, I see my first view in Landscape mode for a second. Then the second view appears. When I change to Landscape mode, only the second view should be seen. I need to make my first view to be completely invisible in the OnOrientationChanging event of
StageOrientationEvent
As stage object and StageOrientationEvent works at application level, I need to know how to refer my first view object in the application level.
private function onOrientationChanging(soe:StageOrientationEvent):void
MyFirstView.Visible = False; ====> don't know how to refer MyFirstView here
Is my question clear now?

How can I remove the Demo Viewer from my MacBook?

How can I remove the Demo Viewer from my MacBook?

Drag it to the Trash.
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper
    2. AppDelete
    3. Automaton
    4. Hazel
    5. AppCleaner
    6. CleanApp
    7. iTrash
    8. Amnesia
    9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.

Hierarchical View from STS

Similar Messages

Maybe you are looking for