Hierarchies,dependent and internal and external hierarchies .

Hi Gurus,
Pls let me know about time dependent and internal and external hierarchies .
Regards
Karan

Ok to clarify
Coflaher,
My end goal is to use Jabber for windows as an internal IM client which currently works fine as "saMAccountName"@domain.loc. I would also like to be able to federate to services listed under the Interdomain Federation section of the document you refered to above.
How should my IM address field read? Since you say it needs to be resolvable from external sources. This leads me to believe my IM field should read "firstname.lastname"@domain.ca instead of "saMAccountName"@domain.loc
Yet when add the following to my jabber.config.xml file it seems to loose it's mapping to all the other fields in AD.
This part of the documentation doesn't seem entirely clear. Your assistance is much appreciated.
true

Similar Messages

How do i change my iPad language because I went to general and international and changed the language to English, but most things are still in Spanish. Please help me set everything to English

How do i change my iPad language because I went to general and international and changed the language to English, but most things are still in Spanish. Please help me set everything to English

To clarify Settings > General > International > Language is set to English?
and Settings > General > International > Keyboard > includes the English keyboard?
When you are on your Home screen is Settings called 'Settings' in english?
what are the things that are still in Spanish?

Can I split my itunes music library between and internal and external hard drive?

Is it possible to have music on the two different drives and still be able to make playlists from both drives to put on my ipod? Here's my situation: I'm using a Dell 32 bit computer running Vista Home Premium SP2 which I share with other users. I have a large itunes library (40g+ of music only) that's starting to hog the hard disk space from other users. If possible, I would like to split off part of my itunes library to an external hard drive while still having access to the entire library for my ipod. Ideally I would like to have all my downloaded songs on both the internal and external drives so I'll have backups in case a drive fails, while putting all the music I have hard copies of solely on the external drive. Any help on how this can be done would be appreciated.

If you manually manage your itues library, you can store parts of it on an external drive, or on an internal drive. Just keep in mind that in iTunes that you must set a default location for iTunes to manage it's files, and that will be the default location for iTunes to store anything it downloads. You would need to manuay manage moving things from there if tht is not where you want them stored.
Perhaps a "better" solution would be for you to invest a little mone into 2 external drives. One to hold your entire iTunes library, and the second to be your off-line backup of the first. This is the method I have gone with and I like how it works for me. My entire iTunes library is on an external (portable) 320GB drive. Then, when iTunes is not running, I will clone my external drive onto a second drive I happen to have, this way if I have any failure of my primary drive, I lose at most about a weeks worth of content. For me, I purchase little content during a week, but I do move a fairly large volume of podcasts. With the entire library being on the external drive, if I ever have to swap to using my backup drive iTunes wil just think that it hasn't run and downloaded anything for a week, and all the "lost" content will be re-downloaded automatically. This won't work for apps or purchased content, but for subscribed podcasts, it is great.

Problem with data table and internal and external command button

thanks for your time,
i have this problem
<t:dataTable binding="#{manejadorAsociarEvaluadoresProyecto.tablaPosiblesEvaluadores}"
cellpadding = "6"
cellspacing = "3"
value = "#{manejadorAsociarEvaluadoresProyecto.listaPosiblesEvaluadores}"
var = "posibleEvaluador"
preserveDataModel="false">
<h:inputTextarea value="#{posibleEvaluador.correoActualCuerpo}"
cols="50"
rows="50"
rendered="#{posibleEvaluador.detalle}" />
<h:commandLink immediate="false" action="#{posibleEvaluador.editar}" value="Editar Correo"/>
</t:dataTable>
<h:panelGroup id="panelBotonEvaluadores" rendered="#{!manejadorAsociarEvaluadoresProyecto.b_mostrarEvaluadores && manejadorAsociarEvaluadoresProyecto.tieneProyectos}">
<h:commandButton action="#{manejadorAsociarEvaluadoresProyecto.mostrarEvaluadores}"
value="Asociar evaluadores"/>
</h:panelGroup>
this is the method of posibleEvaluador
public String editar()
setDetalle(!getDetalle());
return "";
all run perfect, until y click in "asociar evaluadores" button, after of this the commandLink "editar Correo" not run, this commanlLink is for not show the inputTextArea, i don't know what happend.
thanks for your help

Hello,
I have replicated and confirmed the problem with LabVIEW 2010, Report Generation Toolkit 2010 and Word 2010. I have filed this to R&D under CAR ID #257414. As a workaround you can manually set each cell using Word Edit Cell.vi. I have attached a simplified representation of this unexpected behavior as well as the workaround. Hopefully this helps everyone out!
David_L | Certified LabVIEW Architect
LabVIEW Tools Network | LabVIEW Tools Network Developer Center
Attachments:
Word 2010 Table CAR.vi ‏17 KB
Word 2010 Table FIX.vi ‏22 KB

What are policy firewall port should be permit between meetingplace web external and internal

I deploy MeetingPlace Web Conferencing with SMA.
1. What are policy firewall port should be permit between meetingplace web external and internal (web external on DMZ zone and web internal on internal zone)?
2. Synchronized Globally Unique Identifiers (GUIDs) between internal and external Web Servers used firewall port?

Hi,
List of Firewall pots to be opened are mentioned in following document, you can refer your deployment type and open ports as mentioned.
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_Audio-Only_Deployments
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_WebEx-Scheduling_Deployments
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.5_--_System_Requirements_for_MeetingPlace-Scheduling_Deployments
Regards
Ronak patel

External Hierarchies

Guys,
Can someone tell me what people mean when they says "loading external hierarchies"? An example would be perfect.
Thanks,
RG

Hi Ram,
BW allows you to determine multiple external hierarchies for a characteristic. External hierarchies can be used for characteristics in the dimension tables and for activated navigational attributes for query navigation.
Example:
Consider a simple external hierarchy for the characteristic country. Country is a member of the customer dimension table but it could instead, or additionally, be a navigational attribute in the customer master data table. The nodes are of a textual nature. If continent was an InfoObject of type characteristic we could use this InfoObject to define the nodes using its characteristic values like Europe
Regards,
Lakshman Kumar Ghattamaneni

GR/IR Account - one for internal vendor and another for external vendors

Hi Experts,
Can I have two GR/IR accounts - one for internal vendors and another for external vendors? Please let me know.
Thank you.
with regards,
Muthu Ganapathy.

Hi Muthu,
GR/IR accounts are not dependent on Vendors, they are dependent on Materials, to be precise on Plant/Valclass.
You can post to 2 different GR/IR accounts if you set up 2 different classes. then it is possible.
For setting up the same. Go to T.code : OBYC, Transaction : WRX.
Here Setup different GR/IR accounts per val.class.
Letme know if you need further info
Thanks
Kalyan

How to Setup RDS custom property when internal and external domain name space is different

Hi All
I am setting up RDS for customer
My internal domain name is domain.local and my external domain is domain.com
I came across below PowerShell cmdlets on some blogs because my internal and external name space are different
Set-RDSessionCollectionConfiguration –CollectionName QuickSessionCollection -CustomRdpProperty “use redirection server name:i:1 `n alternate full address:s:remote.domain.com”
In above command, remote.domain.com points to which host?
Is it pointing to RD Session Broker
OR
Pointing to RD Session Host servers
I am not sure what above command will do exactly ?
Any help will be highly appreciated
Thanks Best Regards Mahesh

Hi,
It all depends who is accessing the RDS Solution.
If you have a large BYOD or large number of external users, it would be better to use a public certificate.
Have a look at the following script which will simplyfy the configuration of the RDSH hosts with certificates.
http://ryanmangansitblog.com/2014/05/20/rds-2012-rdsh-certificate-deployment-script/
You can use a custom RDP property to hide the Session host names.
Have a look at the following article on configuring certificates:
http://ryanmangansitblog.com/2013/03/10/configuring-rds-2012-certificates-and-sso/
Ryan Mangan | Ryanmangansitblog.wordpress.com | Help keep the forums tidy, if this has helped please mark it as an answer

Exchange 2013 DNS for internal and external domain

Hi All,
I have been assigned a task to implement Microsoft Exchange Server 2013. I need some help in setting up DNS namespaces and design a strategy to have same internal and external names. Let me share some details here.
We have an Active Directory domain myinternaldomain.net, and we have a public domain
mypublicdomain.com and we have setup email policy to have
mypublicdomain.com as the SMTP domain for all the users. We have created another DNS zone in Active directory integrated DNS and created a records for
mail.mypublicdomain.com and autodiscover.mypublicdomain.com which will point to CAS NLB IP. We have 2 CAS servers and 2 MBX servers, we have configured DAG for MBX High availability and planning to implement WNLB for CAS as
hardware LB is out of scope due to budget constrains.
We want to have same URLs for OWA, Autodiscover, ECP and other services from internal network as well as from public network. Users should not be bothered to remember two URLs, using one from internal and other from public networks. I also want to confirm
that with this setup in place do i need to have myinternaldomain.net and server names in SAN certificate?
Thanks

Hi Sccmnb,
You can easily achieve this using split DNS.
Internal DNS hostname "mail.mypublicdomain.com" will be pointing to your internal CAS NLB IP and the external public DNS hostname"mail.mypublicdomain.com" will be pointing to the Network device or
Reverse proxy server IP.
Depending upon users access location(internal\external) the IPs would vary and they should be able to access the website with same name.
The names that you would require on the certificate(Use EAC or powershell to raise the request) for client connectivity would be
SN= mail.mypublicdomain.com
SAN= autodiscover.mypublicdomain.com
You don't need to have the active directory domain name present in the certificate.
Additional to this you need to update the AutodiscoverURI for all servers and OWA,ECP,Autodiscover Virtual Directories InternalURL and ExternalURL fields with appropiate public names.
Some additional Info:
*Internal vs. External Namespaces
Since the release of Exchange 2007, the recommendation is to deploy a split-brain DNS infrastructure for the Internet-based client namespaces. A split-brain DNS infrastructure enables different IP addresses to be returned for a given namespace
based on where the client resides – if the client is within the internal network, the IP address of the internal load balancer is returned; if the client is external, the IP address of the external gateway/firewall is returned.
This approach simplifies the end-user experience – users only have to know a single namespace (e.g., mail.contoso.com) to access their data, regardless of where they are connecting. A split-brain DNS infrastructure, also simplifies the configuration of Client
Access server virtual directories, as the InternalURL and ExternalURL values within the environment can be the same value.
*Managing Certificates in Exchange Server 2013 (Part 2)
*Nice step by step article
Designing a simple namespace for Exchange 2013
Regards,
Satyajit
Please“Vote As Helpful”
if you find my contribution useful or “MarkAs Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Capacity evaluation for internal and external workers in one work center

Hi ,
Normally in all Industries you have internal manpower to execute work. Say I have a work center named "Mechanical" , I will have 5 people working 8 Hrs for 5 days in a week. We usually configure this in capacity tab of work center for capacity category "002-Labour". In scheduling tab we configure sceduling data for a capacity category "002-labour"
In many industries , depending on load, many time, external labours are hired to give assistance to internal workers. Technically it is like adding one more capacity category "PER-Person" and adding number external labours there and in scheduling tab adding required configuration for "PER" capacity category
Total capacity for any given day would be available capacity in capacity category -002 + available capacity in PER capacity category.
However in scheduling Tab , scheduling basis can be either 002/PER.
How can we add more scheduling basis to refer to more than one capacity category ?
Any other alternative to above problem statement?

let us say, you have a work "Pump repair" which is done partly by internal workers say 2 people and 1 external labour. Let us assume the number of people in 002-labour is 2 (internal ) and capacity in capacity category (PER) which is external work center is 3 (Total 5 ).
Now if I I leave scheduling basis as blank, then system will calculate scheduling based on 002 capacity category as it is "Major" . But I want system to consider both 002 and +PER .
You are suggesting two line items "Pump Repair internal" and give 2 numbers and duration as 8 control key PM01 . Create another operation "Pump repair External" use control key PM02 (where in scheduling is enabled) where 1 number - 8 Hrs duration is maintained with another work center.
If I maintain 2 different work centers and two different operations, this will work. But for customer this is just one work and capacity evaluation should be based on capacity category 002 and PER .
How to solve this by maintaining one work center , two capacity categories in same work center and maintaining one control key PM01 in operation?

Internal and external no ranges

hy sap gurus
what is the meaning of ilnternal and external no ranges, where we create internal and ordernal no ranges, can u give clear clarification
thanqu
raja sekhaqr.a

hI
Internal Number Ranges: Doc. No will be provided by the system automatically in serial order allotting the next available progressive number. The number must be in numerical. We have to use the T.Code FBN1
External Number ranges: Doc. No will be given manually by the end user. System will not lock no automatically in this case. User can pick the number randomly. Number may be an alpha numeric.
IT IS LIKE VOUCHER NUMBER FOR ALL TRANSACTION
FBN1
Click on Execute Button
Give Co. Code:
Select Change Intervals
Select insert interval button.
Give No. Year From To
Select insert Enter.
save
Here we create the number ranges for documents. For each number range you specify:
1.A number interval from which document numbers are selected
2. the type of number assignment (internal or external)
You assign one or more document types to each number range. The number range becomes effective via the document type specified in document entry and posting.
Number ranges for documents are company code-dependent. We must therefore create your number ranges for each company code in which the document type is used, namely with the same number range key.
The number intervals must not overlap. If you use year-dependent number ranges, you can specify the same interval with the same key several times for different "to- fiscal years" (the limit up to which a number range is still valid).
If you want to define number ranges, which are independent of the to-fiscal year, enter 9999 in the to- fiscal year field.
For sample documents, use a number range with key X2,
For recurring entry documents with key X1.
These keys may not be used for other number ranges
ASSIGN ME POINTS IF IT SERVES YOUR PURPOSE

What is the diffrence between External postings and Internal postings in CO

Dear all,
Can brief me anyone about the Externa postings and Internal postings in CO,
I suspected all postings from outside or interface postings is External postings and all FI postings is internal postings, Is it true or not still i am suspecting, anyone pls clarify the doubt.
Thanks
Raghu
Moderator: This forum is not dedicated for basic questions. Please, read SAP material before posting

Hi,
All postings which are originated from other than CO module ( i.e from interface, FI etc ), are called External postings in CO.
Whereas internal postings means posting which happen within CO module, example Assessment, Distribution etc within a company code.
Njoy
Siva

Two External Displays and Internal Display Over Different Connections

Hi there.
I'm going to be purchasing a rMBP in the very, very near future. However, I am unclear about how external displays work with this. My current display setup at work is two basic 1080p monitors that can be run over DVI, VGA or HDMI. I'd like to keep using these when I start using the rMBP but also gain the advantage of a third screen by using the internal display at the same time (so much space for activities!).
One of the thunderbolt ports will need to be used for an Ethernet connection (there is no wireless here), so this leaves the setup needing to be one monitor run via Thunderbolt -> DVI and the other monitor run via HDMI.
The internet in general isn't being entirely helpful with this. I'm looking for a clear answer of whether the rMBP will run the internal display and the two external displays using this setup under OS X. Some seem to believe that it won't work using different connection types, for example.
Thanks for any help.

Hello dljfield,
Thanks for using Apple Support Communities.
If you'd like to use multiple external displays with a MacBook Pro with Retina display, then please take a look at the information outlined below. A 15" MacBook Pro mid-2014 can support up to two external displays using different outputs.
MacBook Pro (Retina, 15-inch, Mid 2014) - Technical Specifications
OS X Yosemite: Connect multiple displays to your Mac
Take care,
Alex H.

External and internal mikes are not automatically switching over either recording or on voice calls

My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
   Using the sound recorder if I start recording the sound with external mike and in-between recording if I switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
   But if I start the recording with inbuilt mike and in between recording if I plug in the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
   So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
To resolve the issue I have tried following steps with no luck:
1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
3. I have updated the BIOS(Insyde F.65, 12/02/2010).
4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right

DNS Forwarding Same Internal and External Zone

Hi,<o:p></o:p>
So we have decided that we want our internal domain to be the same as our external domain e.g. domain.uk. I understand that split DNS can be used
to fulfil this requirement but is it possible to set up a forward so if the DNS entry is not available in the internal zone it will forward onto one of our external name servers where it can resolve?<o:p></o:p>
We are basically trying to avoid having to add the entry on both external and internal DNS servers for it to resolve. So far I have added the external name servers to
the forwarders and disabled root hints which didn’t work. I’ve tried to add a conditional forwarder but it says the zone already exists. It seems the only to achieve the internal resolution is by creating the DNS entry both internally and externally.<o:p></o:p>
Does anyone know if this is the case? It seems strange that you couldn’t point the DNS to another external name server for resolution? <o:p></o:p>
Any help would be appreciated.<o:p></o:p>

You must ask in networking forum
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverNIS&filter=alltypes&sort=lastpostdesc

Hierarchies,dependent and internal and external hierarchies .

Similar Messages

Maybe you are looking for