Hierarchy/ Attribute Change Run
Hello Gurus,
I am loading data into one infoobject which is having attributes, text and hierarchy. But after loading data into that info object, if I check in tools -> Apply Hierarchy/Attribute change Run, for that same infoObject it is showing blank.
How do I get that infoobject into tools -> Apply Hierarchy/Attribute change Run -> info objects list???
Thanks in advance.
Regards,
Rajdeep.
Hi Lavanya,
I am doing the same, I am trying to load data. It is getting loaded in the characteristic but I am not able to see that infoobject in apply hierarchy/ attribute change run.
In manage tab I can see that request with ready for reporting.
Thanks for your quick reply.
Regards,
Rajdeep.
Similar Messages
-
RSA1 Setup and Hierarchy / Attributes Change Run Activation
I have perfomed a Hierarchy / Attributes change run in RSA1, but althought it shows no errors; in some transactions (reports) its not updated or rather it still shows the previous and the actual hierarchy values overlapped.
One of the possible solutions its to deactivate and reactivate aggregates, I already entered 0 in transaction RSCUSTV8, also try to find info objects and click on activate master data but none has the option and they are not assigned.
I been reading some solutions that involve making changes to the data that shows in different parts of transaction RSA1, the problem is that in my case there are no data in the transaction just shows some unassigned info objects.
In fact SAP ask me to provide a System Logical Name prior to use transaction RSA1. So problably there are more set up steps missing.
Does somebody knows where should I look for answers.
Thanks
Best Regards,
CarlosIts more complicated than I thought currently learning more about BW
-
Problem in Activating Hierarchy Attribute change run through process chain.
Hi All,
I have the problem in Hierarchy change run processw running through process chain..and also process chain completes successfully without any error..
Even hierarchy change run completes successfully the hierarchy objects are not activating,
so daily when i have to activate hierarchy objects manually..
and what i did was in one attributechange run process i have included 10 hierarchy object is it correct or else i have to separatly create 10 attribute change hierachy proceess in the process chain.. pls through some lights on this issue
With regards,
HariHi venkat,
Yes.. i already include the save hierarchies process in process chain...
my main problem is hierarchy infobject are not activating using process chain and also even process chain is not giving error message.. and in which log table the hierarchy objects are maintained (such as run time, date , status etc..).
IS there is any other settings to be made in process chain..
with regards,
hari -
Master data attribute change run error
hi all,
plz tell me the procedure to overcome the masterdata attribute change run error.plz explain me with steps clearly
thanks in advance,
jackHi Jack,
The process of Attribute change run is just the activation of the Master data same as DSO's.
In RSA1>tools>Apply Hierarchy/Attribute change run(CRTL+F9). You can check your object for which the attribute change run has to be applied through the infoobject list.
Then execute. now the attribute change run is completed.
Please ensure the infoobject is activated.
Provide us the error message to give you more details.
Regards,
Ravi -
Attribute change run for Customer
Hi All,
I did a delta load of the customer data and got some new and changed records. I remember that we need to do an attribute change run after loading any master data. To do that, I went through the menu path Tools Apply hierarchy/Attribute change run...but couldn't find anything there. Do I need to do anything to get the "Customer" here to do the attribute change run.
Thanks,
RPK.Hi
Go to
Tools-->Apply hierarchy/Attribute change run
Oncle ur there click execute to start change run,It will staart and finishes the Attribute change run.
If u want to see the list of objects click on the 'InfoObjectlist' on the Tools-->Apply hierarchy/Attribute change run screen
Assig point if it is helpful -
Error with Attribute Change Run - Urjent
Hi All,
In our scenario we will load master data from APO&ECC to BW.When we are doing attribute change run we are geetting short dump and jobs are cancelling every time .
Please fidn the details below.
Short Dump : ORA-14400 with ABAP/4 DBIF_RSQL_SQL_ERROR..
When I have searched in the forum I got some information saying that we need to drop the index and recreate the index.But we have around 40 cubes.Then how I am going to deside on which I need to the relavent settings.
Please provide me the proper answer.We are facing this problem from past last two days.
Regards
Ramakanth.Hi,
You can try going to the monitor for Attribute change run from RSA1 >> tools >> apply change run or from Transaction RSATTR which will schedule/display attribute change run. Here you can have an option called change run monitor (Monitor icon). this wil show the status of change run including which all info objects are affected, and if its hitting the aggregates of any cubes. There are scenarios where the attribute change run failed with message that it was hitting/affecting aggregates of some infocubes. In case we had to switch off aggregates and trigger the change run again and then swtich on the aggregates after the change run is over.
And sometimes ACR goes on running for a long time in such case we need to check which Aggregate the ACR is currently changing and need to deactivate that aggregate.
But before deactivating an aggregate you need to check the data present in that and the usage of the aggregate.
Please use the table RSDDCHNGPROT and find out the infocube affected by this change run and de-activate "ALL" the aggregates
of the infocube listed under CNSID=0. Then start the change-run.
You can rebuild/refill the aggregates once the change-run is finished.This is necessary because there are inconsistencies in the aggregates
Most of the times we have problem with the Attribute Change Run(ACR) running because ACR and the Roll Up's for Aggregates cannot run in parallel.
Also you can try Tcode CHANGERUNMONI/program RSDDS_CHANGERUN_MONITOR to view this data.
176606 - Apply Hierarchy/Attribute change ... long runtime
175309 - Hierarchy/attribute - change run improved
oss note 322644
Hope this helps.
Thanks,
JituK -
Small confusion about aggregates and attribute change run.. plz explain
hi bw experts,
i am having a small confusion regarding the aggregates and attribute change run.
as far as in know if there is any new master data loaded, then we will activate it by context menu on the particular info object and select the option activate master data.
the second one is going to tools--?apply hierarchy/attribute change run option.
my doubt is is the attribute change run related to aggregates is yes then how,.?
appreciated if you plz help me in detail both these concepts and wherther there is any connection between them.
thanks & regards.
vijay..Hi Vijay sagar,
ATTRIBUTE CHANGE RUN:
1)It's used after you change (add/delete/modify) attribute in the master data. You've to make it in order to have an effect after you modify it.
2)Once the master data has been loaded, the hierarchy/attribute change run is performed. Once this process chain has been ended correctly, master data and texts are available in an active format in SAP BW.
To get it :
1. tcode : RSA1.
2. Tools -> Apply Hierarchy/Attribute Change
3. tap on Info-object list button (checking what master data you've modified before).
4. tap on selection button for type of job
5. Execute.
link(s):
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a67ece07211d2acb80000e829fbfe/frameset.htm
AGGREGATES:
1)Aggregates make it possible to access InfoCube data quickly in reporting. In doing so, aggregates help improve performance. (See Aggregate.)
2)In order to be able to insert aggregates effectively, it is important to find out which aggregates are frequently used or have not been used in a long time.
3)Aggregates contains not only general data but also data that appears in an aggregate after data is filled and rolled up. Reporting in this InfoCube reveals how often data was loaded into an aggregate, how long filling and rolling up took, and whether it took longer to read or write the data.
4)Adding when Rolling Up in Aggregate counts the time required to write the data to the aggregate.
The Records, Read for Aggregate Structure key figure counts the data records that are read for constructing the aggregate.
Refer the following link:
http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Assign points if it helps u
Thanks & Regards,
Madhusudhan Reddy.K -
How to make Attribute Change run alignment & Hierarchy changes in Aggregat
Hello
I want to understand that How to make Attribute Change run alignment & Hierarchy changes in Aggregate?
I posted previously the same question but there were not good answers and i was not able to understand clearly .....
If there is Process chain XXY which makes Attribute change run for Master Data 0SPELLING ?
Now there is Aggregate TRT which includes :
0SPELLING , Fiscal Period , Purchase Product, Purchase Category ?
Now pls answer following question ?
1) Does the Process Chain XXY which makes only attribute change run alignment for 0SPELLING , Will this process chain automatically do the Change run alignment for 0SPELLING in Aggregate TRT ? YES or NO
2) If Yes, then we are just suppose to do Roll up for Aggregate TRT after Process chian XXY completes and finish job ?
3) If No, then what steps are suppose to be DONE so as to make sure that Aggregate TRT has new values and perfect values for 0SPELLING ?
Please answer and coorect if i have any wrong question....for e.g.
u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
so do ur aggregates on day1 with same values
now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
with data load u will load the data with version M of modified and is not available for reporting
If u do attribute change run then this modified version is activated to A i.e. active version .
It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
if u roll up aggregate before attribute change run , new data is not avaialable for reporting
if u roll up aggregate after attribute change run, then data is available for reporting
if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
this is how it works -
How to make Attribute Change run alignment & Hierarchy changes in Aggregate
Hello
I want to understand that How to make Attribute Change run alignment & Hierarchy changes in Aggregate?
I posted previously the same question but there were not good answers and i was not able to understand clearly .....
If there is Process chain XXY which makes Attribute change run for Master Data 0SPELLING ?
Now there is Aggregate TRT which includes :
0SPELLING , Fiscal Period , Purchase Product, Purchase Category ?
Now pls answer following question ?
1) Does the Process Chain XXY which makes only attribute change run alignment for 0SPELLING , Will this process chain automatically do the Change run alignment for 0SPELLING in Aggregate TRT ? YES or NO
2) If Yes, then we are just suppose to do Roll up for Aggregate TRT after Process chian XXY completes and finish job ?
3) If No, then what steps are suppose to be DONE so as to make sure that Aggregate TRT has new values and perfect values for 0SPELLING ?
Please answer and coorect if i have any wrong question....for e.g.
u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
so do ur aggregates on day1 with same values
now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
with data load u will load the data with version M of modified and is not available for reporting
If u do attribute change run then this modified version is activated to A i.e. active version .
It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
if u roll up aggregate before attribute change run , new data is not avaialable for reporting
if u roll up aggregate after attribute change run, then data is available for reporting
if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
this is how it works -
Attribute Change Run for Hierarchy
Dear experts:
we are trying to create a process chain for a hierarchy. When we included "Execute InfoPackage" into process chain, it automatically dragged other 2 steps into process chain as well, which are "Save Hierarchy" and "Attribute Change Run".
My Question is when we looked into "Attribute Change Run", the obj type is "Execute InfoPackage" instead of "Hierarchy". Shouldn't we choose hierarchy as object type when operating Attr change run??
Besides, I checked SAP document. It is said the "Attr Change Run" is only necessary when the hierarchy occurs in aggregates. Can anyone please explain to me what that means.
Thank you very much
Regards
SzuFenHaven't really looked at the object types in the process chain (we're still using event chains here for the most part), but I would be inclined to leave it as, and only change it if you have a problem.
The process chain tool drags steps into the chain by default, e.g drop and build index, attr change run. That doesn't mean you have to keep them in the chain. If you do not have hierarchies in your aggregates, you could remove the step. Now of course, the burden falls on you to remember to add it if you ever create an aggregate with a hierarchy in it.
Of course the next would be, if most of your queries use a hierarchy, you would probably want the hierarchy in the aggregate, otherwise the aggregate isn't going to be used. -
Issue: attributes change run triggers the rebuilt of 0IC_C03 aggregates
Hello Guru,
I am facing to a problem that I don't understand.
Here is below the detail of the messages of a '3-infoobjects attributes change run' step of a Master Data process chain.
22:06:14 Job started
22:06:14 Step 001 started (program RSPROCESS, variant &0000000231235, user ID RFC_BW)
22:06:16 Starting process type ATTRIBCHAN with 3 objects...
22:06:16 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K with ID 22061600
22:06:16 Editing of aggregate 100139; background job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K; start time 22:06:16/07.07.2010
22:06:18 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K with ID 22061601
22:06:18 Editing of aggregate 100143; background job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K; start time 22:06:18/07.07.2010
23:02:29 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K with ID 23022900
23:02:29 Editing of aggregate 100140; background job BICHNG_D8FC4Q04UD7NGLDMZ0QUBLX4K; start time 23:02:29/07.07.2010
23:52:38 Starting process type MDHIERACT with 2 objects...
23:52:39 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIACTI_D8FCR9Y1NWOP2T4F76FYE0HDG with ID 23523900
23:52:39 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIACTI_D8FCR9Y1NWOP2T4F76FYE0HDG with ID 23523901
23:53:10 Aggregate 100139: Repair indexes
23:57:14 Aggregate 100140: Repair indexes
00:17:23 Aggregate 100143: Repair indexes
00:50:09 3 aggregates are condensed
00:50:09 Starting process type CONDAGGR with 3 objects...
00:50:10 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICOND_D8FD3GTNF0KF92R34346SW6PG with ID 00501000
00:50:10 Editing of aggregate 100143; background job BICOND_D8FD3GTNF0KF92R34346SW6PG; start time 00:50:10/08.07.2010
00:50:10 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICOND_D8FD3GTNF0KF92R34346SW6PG with ID 00501001
00:50:10 Editing of aggregate 100140; background job BICOND_D8FD3GTNF0KF92R34346SW6PG; start time 00:50:10/08.07.2010
00:50:16 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BICOND_D8FD3GTNF0KF92R34346SW6PG with ID 00501600
00:50:16 Editing of aggregate 100139; background job BICOND_D8FD3GTNF0KF92R34346SW6PG; start time 00:50:16/08.07.2010
00:50:22 Hierarchy/attribute change successfully carried out
00:50:23 Event RSPROCESS with parameter D59BE8XWZMHY0IFP2VLEFP671 successfully triggered
00:50:23 Job finished
As you can observe, the step takes almost 3 hours !!!!!!! After anlyses BICHNG_* concerns
22:06:16 Job started
22:06:16 Step 001 started (program RSBATCH_EXECUTE_PROZESS, variant &0000000891873, user ID RFC_BW)
22:06:18 Aggregate 100139( 0IC_C03) is being adapted / rebuilt
22:06:18 Statistic UID of the aggregate process: 'D8FC4Q9KSAMRDWQ1RDPPKMF3O' (RSDDSTATAGGR)
22:06:27 Aggregate 100139: Read (1) from table /BI0/E0ICC03_ (max 500000 records)22:06:27 SQL: 07.07.2010 22:06:27 RFC_BW
I don't understand what is the link between the '3-infoobjects attributes change run' (BBATCH, 0MAT_SALES, 0MAT_PLANT) and the rebuilt of 3 0IC_C03 (Material Stocks/Movements) aggregates (why does the 'attribute chan run' trigger the rebuit of aggregates???).
The rebuilt of the 3 aggregates takes 1 416, 3 366, 3 009 secondes...
Does anyone understand my problematic? If not I can give you more details.
Thanks in advance for your help.
Samuel1/ Exactly Fred
Here is the definitions of the aggregate:
100139:
0PLANT
0STOR_LOC
0MAT_PLANT__0VAL_CLASS
0STOCKCAT
0STOCKTYPE
BMODIFIC
BMVTSTOCK
0MATL_TYPE
0CALxxx
2/ For my information in the aggregate 100140 , does the presence of BBATCH (one of the 3 IO) trigger the rebuilt or is it only 0MAT_PLANT__0VAL_CLASS ?
100140:
0PLANT
0STOR_LOC
0MATERIAL
0MAT_PLANT__0VAL_CLASS
BBATCH
0STOCKCAT
0STOCKTYPE
BMODIFIC
BMVTSTOCK
0MATL_TYPE
0CALxxx
3/ In the same process chain, I have another Attributes Change Run: 0MATERIAL. Several active aggregates using 0MATERIAL__0MATL_TYPE are built on a CO-PA cube.
Why did the '0MATERIAL Attributes Change Run' rebuild no aggregate? (see below)
22:06:04 Job started
22:06:04 Step 001 started (program RSPROCESS, variant &0000000231238, user ID RFC_BW)
22:06:06 Activation of master data for 0MATERIAL
22:06:07 154 Data records deleted
22:06:11 154 Data records deleted
22:06:12 154 Data records updated
22:06:13 154 Data records updated
22:06:13 0 aggregates are condensed
22:06:14 Hierarchy/attribute change successfully carried out
22:06:14 Event RSPROCESS with parameter D59BEEE069HKRCRU0ZPYFUPB1 successfully triggered
22:06:14 Job finished
Samuel -
Attribute change run error in daily job (BI 7.0 SP 23)
Hi All,
We are facing an Attribute Change Run error in one of our daily batch job.we donnot see any locks in SM12.and a dump occurs in ST22.we also donnot have any master data load running at that time .We executed the the FM RSDDS_AGGR_MOD_CLOSE,but the Change run error occurs frequently .How to get the root cause of this issue as we donnot have any master data load running at that time.
regards,
mariaIf you are sure that your master data is 0MATERIAL then GOTO-RSA1>Tools in Top>Select Attribute Hiearchy Change Run>Select Info Object List>Select 0MATERIAL>Execute.Then message "Attribute/Hierarchy change run scheduled" will appear in the Tab on your User ID.Once its finished your masterdata is activated.
For Activate Master Data we can do another method like "Right click on the particular Infoobject which need to activate and click "Activate Master Data".
The above steps is for manual activation of master data changes..
If you want to automaize the above steps "Need to add Attribute/Hierarchy Change Run" in the process chain.When execution of Processchain it will activate all the master data in the list one by one and also realign the Aggregates which using the master data objects. -
How does attribute change run works for Aggregates and Master data?
Hi
Can anybody xplain how does the attribute change run works for Master data ?
For e.g.
There is 0spelling and it has master data
On Day 1 there are 10 records
day 2 it has 12 records
so with attribute change run this 2 new records will get added....
The values for this 12 records will added seperately in Data load
Is this how it workss
So how about Aggregates which has Master data.????for e.g.
u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
so do ur aggregates on day1 with same values
now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
with data load u will load the data with version M of modified and is not available for reporting
If u do attribute change run then this modified version is activated to A i.e. active version .
It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
if u roll up aggregate before attribute change run , new data is not avaialable for reporting
if u roll up aggregate after attribute change run, then data is available for reporting
if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
this is how it works -
Problem with Customer master Attribute change run
Hello Experts
Master data load process chain for 0Customer failed in system at attribute change run step.
Because of that failed instance when ever we try to reload data get error message
"Attributes of characteristic 0CUSTOMER are locked by terminated change run 468502640"
"Lock NOT set for: Loading master data attributes"
It seems that last attribute change run step had locked master data object and lock is not yet released.
Kindly advice resoluiton to this problem.
Thanks in advance
Regards
SudeepFailed due to lock issue. check in SM12 you can find lock with respect to your change run 468502640.
Looks like master data step is running.
Wait till the masterdata for attributes of 0CUSTOMER completes and them repeat the attribute change run step.
To repat the attribute change run
Rsa1 --> Menu Tools -->Apply Hierarchy/change run or use transaction RSATTR
Click on monitor and Start Terminated Changes Runs(monitoring of Change runs)
Here you can check the failed Attribute change run object in red status.
after completion fo the master data and check the locks and click on execute button over there. -
Hi All,
I have a Info Object 0MEASERE, we have maintained master data for that and ran attribute change run... but unfortunately it was not activated, so we ran change run again now we get the message saying that it is locked in the terminated job.
But when i check st12 there are no locks against the user.
Can someone please tell me what should i do to activate this?.
Regards
BNHi,
Chk this thread. It should help ur issue.
Hierarchy is locked by a terminated change run
Hope it helps. Assign points if useful.
Cheers.
Maybe you are looking for
-
How do I delete several emails at a time on my Airbook?
I have over 8,000 emails. Most of which I want to trash. Is there a simple way to group them together and delete all at once?
-
Find query name based on workbook id and vice versa
Hi, I need to developed a progarm in which user can enter Query name ( tech name ) and it should display all workbooks releated to it and vice versa . Is there any tables which stores this relationship.? Wating for response. Thx in advance . Rega
-
Facebook app from Nokia store won't detect data
My Facebook app on my E5-00 will only detect the wifi at my house and nothing else. So, when I'm away from home I cannot access this app... The settings on the app doesn't provide a choice of what data I want to use, so what can I do? I've already d
-
Songs are not downloaded from any web sites
whenever i try to download the song it starts playing
-
Create a button to link to a pdf
I created a button to link to a pdf but i cant get it to pull up when i click the button. Ive tried editing the index.asp file where the button resides but im having no luck. Can anyone help me?