Hierarchy could not be included; root element does not exist ?
hi,
I try to change hierachie for the released WBS with function CN2W_WBS_HIERARCHI_CHANGE_STRU, but I got an error like : "Hierarchy could not be included; root element does not exist" But this does not happen when we change the WBS hierachie in CJ20N, Could you please help me how to change hierachie for the released WBS using the function ? And Which function I can use ?
Thanks in advance
you are using correct function module. Just check the values in Up and down columns .
Similar Messages
-
Root element added in existing mapping PI 7.1
Hi Experts,
I got existing mapping with around 500 fields, the source structure is external defination, they added the root element to existing xsd, when i try to import the external definition into the mapping it is giving following error.
Function model undefined (FUNCMODEL_UNDEF)
MESSAGE ID: com.sap.aii.mappingtool.mf.mapping.rb_Mapping.FUNCMODEL_UNDEF
Parameter AMappingTool has the invalid value null
Is anyone faced this problem before, i am working on PI 7.1, but when i create the new mapping then i can successfully imported the external definition into mapping, but how can i get my existing mapping into new mapping??
Thanks> Is anyone faced this problem before, i am working on PI 7.1,
Yes, indeed. Report this to SAP. -
Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!
Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium -
Windows control panel routine to designate Elements 12 as my default editor does not list the program. It loaded OK and accepted the key. Your regular help line could not help. What to do?
Hi Robbie,
The editor program is NOT under the organizer path as you mentioned in your last message. The actual editor program is at the location I gave in message #1 i.e. as follows
"C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
The one under the organizer is actually the Welcome screen which you have probably set up to go directly to the editor.
If you go to the Open With screen I showed in message #3 and browse to the actual editor as given above, it should show up in your list.
If it doesn't, then Windows is playing up again - and we have to take extra steps.
Brian -
Activity Type: cost element does not exist
Dear All,
I am working on ERP configuration for PP module as an academic exercise. I am already through with FI, CO and MM modules.
I am not able to get through the Activity assignment step in PP module. (Accounting u21D2 Controlling u21D2 Cost Center Accounting u21D2 Master Data u21D2 Activity Type u21D2 Individual Processing u21D2 Create). While creating activity type labor (labor hours), I am getting error "cost element does not exist for aggregated period"
In CO module I have created primary cost element for "Labor"(Category: primary cost/ cost reducing revenues). Also created secondary cost element for labor (cost element category: Internal activity allocation).
Can anybody guide me on how to go further?
regards,
SupriyaDear
Please revivew the following steps when you are creating a New Acvity type :
OP51 - Check Settings for formulas
OP54 - Check formulas for Costing
Ensure that usage of the parameters are indicated. Some parameters are appropriate for capacity calculation but not for schedule calculation. If you like to find out the parameter id, you could use the Search Fld. for Param. pull down button to do so.
KLH2 - Maintain hierarchy of Activity type group.
OP19 - Define standard value key
The purpose of standard value keys is to group together a set of parameters for the purpose of ensuring that the standard values for the parameters are supplied in the operations of the routing. This is so that the formula (for calculating cost, schedule, and capacity) could have the necessary figures to work with. Once the parameters are associated with the standard value keys, work centers quoting this standard values will be able to dictate whether or not the parameter values are optional or mandatory entry in the operations of the routing. The pre-requisite for using this transaction is that the parameters must have been pre-created.
KA01 - Create Primary Cost Element for the new activities type. Maintain Correct From and To date inline with Activity Type KL01 - Create Activity Type tied to the primary cost element. (the Cost element field)
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
If the user include the additional activities in their work center, the routing that used the work center will required more time to finished the jobs.
The operations Start and Finish date will be extended due to the extra time spent on the work center. The cost of production increases in line with the extra activity which will be reflected in the Factory Output when you do a cost analysis in the production order. The new activity will have a price attached to it and the moving average price will increase.
Regards
JH -
Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
===========================================================
This is a SQL Server 2012 Developer Edition of SSRS.
I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
I can still get to the http://servername/ReportServer site.
Neither of these are using Sharepoint.
Any help resolving this issue would be greatly appreciated.
Below is the stack trace.
===========================================================
[FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
===========================================================Hi Glen，
"The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
In this case, it should be caused by:
While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
does not match the assembly reference."
For more information about the error message and the loading process, please see:
http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
Thanks,
Jinchun Chen -
I took 6 panorama shots of a scene and used CC to Photomerge them as one. Couldn't see where to automatic blend the edges and there was 'stitch' lines when the images were merged. So i did the same in Elements 11 and it was perfect. Am i doing something wrong in CC or perhaps not doing something at all?
Any help, please?
DaveHi - Thanks for taking the time to reply and i appreciate the remarks- if a little harsh- we all have to start somewhere and i am fully aware of the limitations of Elements which is why i decided to add CC to my software. I can only say that if an inferior quality software from Adobe does the job well then CC must also be suited to doing the same which is why i can only think, from your comments, that i have not done something simple- however- following tutorials to get to the end result should have sufficed- it didn't so perhaps i will consider posting the difference between the two applications- and, perhaps suffer a few more 'harsh' comments. The learning curve is quite steep and i am a visual learner, but i'm also not totally incompetent:)
Kind Regards
Dave Munn
Original message----
From : [email protected]
Date : 02/02/2015 - 06:45 (GMTST)
To : [email protected]
Subject : why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
created by station_two in Photoshop General Discussion - View the full discussion
First a clarification: you are not addressing Adobe here in these user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
I'll give it my best shot anyway.
Few folks in this forum are really familiar with Elements, for which there's a dedicated, totally separate forum.
Different engineering teams, also.
From this perspective, it will be difficult to give you a direct answer to your "why?" question.
Personally, I blend very large panorama shots in Photoshop proper since I can't even remember when without any issues whatsoever, up to and including in Photoshop CS6 13.0.6.
Without being at your computer and without looking at your images, I couldn't even begin to speculate what you are doing wrong in Photoshop, which I suspect you are. The least you could show is post examples from your panoramas that have gone wrong.
I can tell you that panorama stitching requires significant overlap between the individual shots, besides common-sdense techniques like a very solid tripod and precision heads.
The only version of Elements I have ever used for any significant time was Elements 6 for Windows, which I bought in 2008 to use on a PC (I've been an avid Mac user for 30 years). I found Elements so limited and so bad that I successfully demanded a refund from Adobe. IU mention this only to emphasize that I can truly only address your question from a Photoshop (proper) and Mac user point of view. I couldn't care less about Elements, but if you have comparison examples of panoramas processed in both applications, by all means post those two.
Generally speaking Photoshop is a professional level application that makes no apologies for its very long and steep learning curve, while Photoshop has many hand-holding features for amateurs and beginners.
Perhaps the bottom line is that you should stick with Elements if you personally manage to get better results there.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7152397#7152397 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7152397#7152397
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Photoshop Elements 6: Could not use type tool because the file could not be found
Using Adobe Photoshop Elements 6.0 well for a while.
Tried to use the Type Tool to overlay text and obtained this error:
Could not use the type tool because the file could not be found
After research, I reset all tools, tried to repair (failed: insert disc one), and then removed/re-installed. Still have the same problem.
Are the system fonts corrupt or is an Adobe .ini file suspect?
Other reports have suggested using a 3rd-party font manager to inspect/disable fonts.
First wanted to post this error here for feedback/recommendations
Any suggestion on how to recover the Type Tool functionality?
Eric Edberg
Adobe Photoshop Elements Repair Workaround
When trying to repair the well-known: insert disc one, error occurred. Was able to successfully repair the installation by dragging the entire Adobe Photoshop Elements directory from the original CD-ROM onto a hard drive and executing locally. Seems it does not like repairing over the CD-ROM but it works correctly if the install source is on disc...John,
Yesterday, I decided to completely remove all Adobe products: PSE 6, Premiere 4, Reader, ActiveX plugins & legacy/old uninstalled product directories that Adobe has left turd-lets around including old Acrobat 3/6 directories. Used A/D Software to remove all adobe products and then followed your instructions AND the instructions on Adobe's support web site to manually remove these products.
It boiled down to manually removing the entire Adobe directory in Progam Files, "saving" the entire Adobe directory structure in each users (3) Document and Settings in the Application Data and Local Settings (as instructed by you and Adobe) and rebooting.
I also saved the local All Users "configuration" database/cache that contained the Tag and other information to make sure the system was clean
This included following the manual Regit instructions to remove legacy Adobe registry hives. I deleted all keys for all Adobe product trees that I could locate (following instructions from Adobe).
Reboot
Scheduled a CHCKDSK on all drives and rebooted
Dragged my complete image library to an archive location and deleted them on the C: drive
Did a complete system Defrag
Re-installed Adobe and alas still have the same problem with the Type Tool....
The only thing I did not do was selectively remove the "fonts" because various instructions seemed to indicate many are "required" by the windows or other applications and I was not really sure how to identify which ones were safe to remove w/o affecting the core system.. I'll have to re-read these instructions next.
Microsoft has a "Font Validator" tool, but that only checks 1 font at a time and you have to read the "results". May look for other tools.
Will be able to check the font structure this weekend since it will take some research before I'm comfortable just removing fonts in trial/error mode. I'll need to make a backup image of my computer before I start this (just in case).
Thanks for follow-ups too!
Eric Edberg -
Xsl:include msg - document following root element must be well-formed
I am getting the following message when I try to execute a transaction that takes an XML file & transforms it. The message is:
"[ERROR]: XSLTransform error: javax.xml.transform.TransformerConfigurationException: javax.xml.transform.TransformerException: org.xml.sax.SAXParseException: The markup in the document following the root element must be well-formed."
The transaction loads an xml input file, and then transforms it. The transformation stylesheet does some formatting to the xml. The stylesheet has an include in it that adds an element to the output.
Input XML data
<?xml version="1.0" encoding="UTF-8"?>
<Rowset>
<Row>
<ItemNo>00000000001884304</ItemNo>
<ItemDesc>Test Item Description</ItemDesc>
</Row>
</Rowset>
Expected output:
<?xml version="1.0" encoding="UTF-8"?>
<Item>
<Items ItemDesc="Test Item Description" RawItemNo="00000000001884304" dotties="...................." editedItemNo="1884304" supernova="**********" />
</Item>
If I point the <xsl:include to a web folder on a test box, it will read & translate the data into the expected output. However, when I have both the initial stylesheet and the include stylesheet in the same Web folder in MII, I get the above message. If the URL is any different, it generates an IO error.
The initial stylesheet is
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" >
<xsl:output method="xml" />
<xsl:include href="http://myserver:myport/XMII/CM/foldername/testcalls_2.xsl"/>
<xsl:variable name="wrkitem" select="//ItemNo"/>
<xsl:template match="Row">
<xsl:call-template name="RowEdit"/>
</xsl:template>
<xsl:template name="RowEdit" match="Row">
<Item>
<xsl:element name="Items" use-attribute-sets="RowChange">
</xsl:element>
</Item>
</xsl:template>
<xsl:attribute-set name="RowChange">
<xsl:attribute name="RawItemNo">
<xsl:value-of select="//ItemNo"/>
</xsl:attribute>
<xsl:attribute name="editedItemNo">
<xsl:call-template name="removeLeadingZeros">
<xsl:with-param name="originalString" select="$wrkitem"/>
</xsl:call-template>
</xsl:attribute>
<xsl:attribute name="ItemDesc">
<xsl:value-of select="//ItemDesc"/>
</xsl:attribute>
<xsl:attribute name="dotties">
<xsl:call-template name="dots">
<xsl:with-param name="count" select="20"/>
</xsl:call-template>
</xsl:attribute>
<xsl:attribute name="supernova">
<xsl:call-template name="stars">
</xsl:call-template>
</xsl:attribute>
</xsl:attribute-set>
<xsl:template name="dots">
<xsl:param name="count" select="1"/>
<xsl:if test="$count > 0">
<xsl:text>.</xsl:text>
<xsl:call-template name="dots">
<xsl:with-param name="count" select="$count - 1"/>
</xsl:call-template>
</xsl:if>
</xsl:template>
<xsl:template name="removeLeadingZeros">
<xsl:param name="originalString"/>
<xsl:choose>
<xsl:when test="starts-with($originalString,'0')">
<xsl:call-template name="removeLeadingZeros">
<xsl:with-param name="originalString">
<xsl:value-of select="substring-after($originalString,'0' )"/>
</xsl:with-param>
</xsl:call-template>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$originalString"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet>
and the stylesheet being called by the xsl:include -
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template name="stars" match="Item">
<Stars>
<xsl:element name="BBB">
<xsl:text>**********</xsl:text>
</xsl:element>
</Stars>
</xsl:template>
</xsl:stylesheet>
FYI, both of the stylesheets above are in the same folder on the WEB tab in MII. The full name (properties tab) is:
foldername/WEB/Test/stylesheet.xsl
Also, I am able to browse & view each of them in IE. The url they are at is:
http://server:port/XMII/CM/foldername/test/stylesheet.xsl
Both stylesheets appear to be well-formed.
If I use any other syntax other than the full URL, the error it generates is an IO Exception on the included stylesheet. The markup message above makes me believe that it is at least attempting to handle the included stylesheet.
In the Link editor of the xsl Transformation Incoming tab, there are two assignments being made.
1. Transform property
object= xsl_transformation_0
property=Transform
expression="db://foldername/WEB/Test/stylesheet.xsl" (this is the initial, not included stylesheet)
Link type=Assign Value
2. Input property
object= xsl_transformation_0
property=Input
Expression=testitems_0.XmlContent
Link type=Assign XML
Running MII 12.0
Thoughts? Any input appreciated.In the first one you have two namespaces both with the same prefix.
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" and xmlns:xsi="http://xxxxxx/webservices/sites/"
Thanks,
Gaurav Jain
Flex SDK Team
http://www.gauravj.com/blog -
Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.
I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help. -
I'm on a mac running 10.6.8, was using Firefox 6.02 when the problem started, i performed a clean install of 7.01, installed the latest Flashplayer, and reinstalled java (the 10.6.5 update file from apple's site).
I seem able to load video at youtube.com, and was able to load web-based irc chatrooms at ircchat.tv. however, at jamplay.com a paid member site, all of the lessons are flash video, and there's a live video feed chat room that is also flash based, and I am not able to view this content. the video content pops up the error message "Error: the xajax Javascript file could not be included. Perhaps the URL is incorrect?
URL: /includes/javascript/xajax_js/xajax.js" and the clicking on the "launch chatroom" button does exactly nothing.
I have contacted the jamplay site team but their recommendations are the steps I have already taken, mentioned above, that did not resolve the issue.
some links to content on their site visible without being a member:
http://www.jamplay.com/
this one has a flash interface that, if things were working, would have a video in the center and members and staff talking abouth that area of the site when you click on one of the title buttons. Now that I am having this problem, nothing is clickable and there's no indication that there should be a video in the center. The error message regarding xajax does not come up at all.
http://www.jamplay.com/guitar-lessons/beginners/1/527-16-circle-of-fifths
same thing. video content is missing, xajax error does not appear.
http://www.jamplay.com/live
when I load these all content except the video loads on the page. this page does not give me the error at all, just does not load the video
I can't seem to recreate the actual error without being logged in as a member of the site.
The apple support team gave me a one-time free suppport ticket to troubleshoot an ethernet issue I was having. Unfortunately, the databases I removed were not deemed either by apple or me to be noteworthy or necessary to retain (all of them were for software I not longer have or use). I don't know which plist file might have been the one I need now. I did reinstall the java and flash items. The only other item that I think it might be is a set of belkin router software that I uninstalled because i'm not using any belkin hardware anymore.
If someone has any kind of idea I would be most appreciative.That's a comment in the file. It has no effect at all.
-
Type (..) of the context element (..) in view (..) does not exist
Hi all
I have got an question. I have an ABAP webdynpro with a context node which is connected to an ABAP structure.
The context node is mapped to a context node of a view and the fields of the view are mapped to the context node of the view. So the data is send through them. That works fine.
Within this ABAP structure i have added 3 extra new fields. After creating them i activated the structure.
Within the webdynpro i have updated the context mapping between the node and the structure and also between the different mappings between the views and the componentcontroller where this node is used,
Within the context tab of all the views i see all the three new fields.
When i try to map those fields to a field in the screen it cannot be done. i get the following message:
Type (..) of the context element (..) in view (..) does not exist
Anf the new fields are gray.
Does anybody know the solution for this?
kind regards,
Anton PierhagenHi all
Thanks for all of the replies. But unfortunately the right answer wasn't there.
I had tried to map the structure and re-create the node on several levels in my web-dynpro, but there was no change after this changes.
When i created an own dataelement and an own domain in my ABAP structure, it worked.
I could select them in the webdynpro. But why????
i still not get it..
But thanks for the replies!
Kind regards,
Anton Pierhagen -
Transfer to new PC: The project could not be loaded, it may be damaged or contain outdated elements
The Problem
I have transferred a large and functioning Premiere Pro project to a more powerful PC but am unable to run it, stopped by the error message "The project could not be loaded, it may be damaged or contain outdated elements".
Facts
The new PC has a 6-core processor and a different hard drive configuration but the operating system on both is Windows 7 and both PCs host up-to-date Premiere Pro CS6 (as part of Adobe Production Premium). The PCs are networked and Premiere Pro on the old PC can successfully load and run the project file located on the new PC, proving that the transferred file is not damaged. Also, preceding versions of the same project generate the same error message when run on the new PC except, very oddly, for earlier versions saved on or before 28 June 2011, when the project was only a fifth of its current size; those versions load correctly. Contemporary notes show that the editing carried out that day was simple timeline editing, ie no After Effects etc (that came later), and the project has worked fine then and since.
So I don't have a damaged project file and don't know what "outdated elements" means.
Help
Any help solving this problem would be much appreciated.Hi Vinay
As suggested I renamed the additional folder, created a new project, set 'Custom' editing mode, 'Microsoft AVI' as the preview format with 'Uncompressed' codec.
Unfortunately the results were similar to before: On importing the original project into the new project I was sequentially asked for the locations of various files, including After Effects .aep files. The final file location request, for an mp3 audio file, was followed by lots of conforming and indexing. During this process the 'Where is the file XXX.mp3? window stayed locked open. Eventually, with all conforming etc finished, this window was still open and locked. Clicking anywhere on the screen caused a 'ding' and another, smaller, box opened, listing three .aep files. This box asked no questions and gave no options for selecting a file location so, with the topmost file highlighted, I just clicked 'ok' and the box disappeared, leaving the 'Where is the file XXX.mp3?' box still open.
The importing process took about 30 minutes. I waited another 10 minutes, in case something was happening in the background, but with the Task Manager CPU usage value sitting on 0 or 1%, I used it to shut down the project.
For what it is worth, I created a simple new project on the old PC – just a few video clips and transitions in a single sequence (no After Effects etc). This project was then transferred to the new PC and it opened successfully.
Again I remain grateful to you for this and any more advice.
Best regards
Dave -
Could not turn on Screen mirroring. The output device is not ready or does not support HDCP
i tried it on my tv sony bravia w700b with my new xperia z1
i didnt unlocked my bootloder or i didnt rooted my phone
dont know whats the problem is
'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
If you have unlocked your bootloader this may also be the cause for this issue.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Root device mounted successfully, but /sbin/init does not exist ???
I'm having the issue where when I boot after doing a fresh install, it gives me:
ERROR: Root device mounted successfully, but /sbin/init does not exist
Bailing out, you are on your own. Good luck
sh: can't access tty; job control turned off
[rootfs /]#
My fstab:
# /etc/fstab
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda1 LABEL=homerroot
UUID=877deab9-624d-4e1d-90a1-ccc1d6ebc0c6 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda2 LABEL=homerboot
UUID=77835da5-8a38-44c1-bf27-bb657df4484b /boot ext4 rw,relatime,data=ordered 0 2
# /dev/sda3 LABEL=homeretc
UUID=8a1b5bd8-b147-41e0-87df-70a4a9e12df2 /etc ext4 rw,relatime,data=ordered 0 2
# /dev/sda4 LABEL=homervar
UUID=8eb2e7b1-cdf1-46ce-9dc1-439d002bfae4 /var ext4 rw,relatime,data=ordered 0 2
# /dev/sda5 LABEL=homerusr
UUID=bce162b4-d27f-450c-a0e6-4d3ebc6242dc /usr ext4 rw,relatime,data=ordered 0 2
# /dev/sda6 LABEL=home
UUID=62de76ab-b6d4-4e3d-a423-c287b81813a9 /home ext4 rw,relatime,data=ordered 0 2
# /dev/sda7 LABEL=public
UUID=d98a9c8e-2301-4e66-8c7f-26167633a4b0 /public ext4 rw,relatime,data=ordered 0 2
This looks fine to me, but when /dev/sda1 is mounted at /new_root, none of the other devices are mounted....
I don't know if this is what's causing the problem since /etc, and /usr are on separate partitions from root, but
this would be the first time I get a problem dividing things this way (on ubuntu, mint, fedora, et cetera).
So I tried:
https://bbs.archlinux.org/viewtopic.php … 3#p1283343
I get "* is owned by filesystem 2013.05-2" for all three dirs from step three.
None of the other steps have any effect....
I also tried:
https://bbs.archlinux.org/viewtopic.php?id=172943
My /dev/sda1 mounts to new_root, so I don't think I'm having his problem.
And:
https://bbs.archlinux.org/viewtopic.php?id=166423
I reinstalled systemd-sysvcompat, and I'm sure that's not my problem.
Interestingly enough, /usr/lib/systemd/systemd is an elf file on my target hard disk.
Is this an outdated issue or something? Or should /usr/lib/systemd/systemd be a text file?
Thanks in advance for your help guys!WorMzy wrote:Oh, and /usr/lib/systemd/systemd is supposed to be an ELF binary. Not sure why you think it should be a text file.
I saw another thread saying that adding an entry there would help. I think it was "init=<something>".
WonderWoofy wrote:A separate /etc is not supported whatsoever. There needs to be initial access to a few things there. I'm sure it could be made to work with some initramfs hackery. But it is neither supported or wise to do so IMO.
I'll not do the separate partitions then. Thanks. I'll check back if it works/doesn't-works.
Maybe you are looking for
-
Hello Again, I first wanted to thank those who helped with my initial issue. I went through the 16 steps and was able to fix the blue hue over my output video. Now I have an issue where when I go to playback in the output video, it is very choppy or
-
Elements 10 won't recognize my RAW files from my new Canon T5i. What can I do?
need help with RAW and Canon T5i in elements 10
-
I want a field from Billing document which Must have 100 % functionality similar to the Field in sales order Header (Tab -Billing document)- Tax departure country LANDTX (TDC). I need to include that a field from billing document in a routine whi
-
Does Photoshop support N-Color ICC profiles for soft proofing?
Hi All, Does Photoshop support N-Color ICC Profiles for soft proofing? If yes, then can anyone guide me? Thanks!
-
Creative Suite 4 upgrade will not accept serial number
I purchased Creative Suite 4 as an upgrade to Dreamweaver MX and everything was fine until my laptop packed up. On my new laptop I have re-installed Creative Suite 4 but it will not accept the serial number. I suspect this is because I do not have Dr