Hierarchy Datasources in modified status

Folks,
Hierarchy datasources (replicated ones from R/3) are all in the modified version. They are 3.x datasources. I tried to activate them using following methods:
1) replicated them again
2) activated the transfer rule again
3) installed the datasource on BW side again
3) tried using program RS_TRANSTRU_ACTIVATE_ALL
None of the above methods worked and the datasources are still in the modified version. Though the loading status are all green but it seems that no changes updated in BW.
Please guide/suggest. Thanks in advance.

hi all,
i assume you guys are on NW04s BI 7.0, all DataSource that are created in BI 7.0 are new design, master data attribute, text and transaction DataSource can all be created in the new BI 7.0, but for hierarchy DataSource, it remains as 3.X, if you double click on the Hier DataSource, you will see the title "...Emulated 3.X ...", so the DataSource should be working perfectly fine except it is in "Modified" version, i believe it is just SAP has not or can't a way to upgrade hier DataSource.
cheers.

Similar Messages

How to create a hierarchy datasource in R/3

Hello,
We use the 0MATERIAL_LKLS_HIER hierarchy datasource to load material hierachy in BW.
I had to modify the function module that creates the data for 0MATERIAL_LKLS_HIER.
Now, i need to create a new datasource based on the new function module.
To do so, i created a generic datasource (with SBIW), a master data attributes datasource.
I tried to put the same parameters that in 0MATERIAL_LKLS_HIER, but i didn't find how to indicate that it's a hierarchy and some other parameters (as you can see in RSA2 for 0MATERIAL_LKLS_HIER in the "semantic attributes" area).
Also, i couldn't run the new datasource in RSA3 because it didn't show me the right selection fields.
Could you tell me if there is a specific transaction to create hierarchy datasources ?
Thank you.
MGH

Hi,
May help you:----
Re: hierchy creation in ECC and replicate to BI
http://help.sap.com/saphelp_nw04/helpdata/en/8e/dbe92341c84242be2c7d3917f1c197/content.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7034028c-ad1d-2a10-2c94-868e7707dfe2
Regards,
Suman
Edited by: Suman Chakravarthy on Aug 6, 2011 3:12 PM
Edited by: Jason Lax on Dec 28, 2011 2:28 PM (Updated URL to correct format)

Creation of Hierarchial datasource in 7.0

Hello,
I want to create an extractor ( 7.0 ), for loading hierarchy into an infoobject. I came to know that its not possible to create Hierarchial datasource
in 7.0 flow ( possible only in 3.X).
still is it possible to create one through RSA2 transaction?
In RSA2, if i create a new datasource, there is a field DataSource Type--> and the F4 help gives an option of HIER ( Hierarchy nodes )
is it the right way to create one??
Thanks
Karthik

Hi,
Thanks for your reply.
The BW10 transaction does not seem to exist.
And i followed the steps mentioned in the link. In step 3, after entering the source system, i am getting a pop-up where i am asked to select
a datasource.
Here there are only two datasources present for selection
one is attribute datasource , other one is datasource for loading text. ( which were already there).
Here i am supposed to get another datasource name ( Hirearchial datasource ). I know that i have to create one before following the steps mentioned in the link.
( So that i get my hirearchail datasource name for selection in that pop up )
my question was how do i go about creating this datasource. In RSO2 transaction , i can create datasources for loading text, attributes and transactional data.
There is no option for creating Hirearchail datasource.

Flat File Hierarchy Datasources

We are creating several flat file hierarchy datasources. The datasources will be maintained in an external database.
I am familiar with the creation of flat file datasources for master and transactional data, but don't have good documentation for how the external flat file hierarchy is to be formatted.
We have reviewed the 2004 Netweaver Document "How to Download Hierarchies in BW" and have used the program referenced there, Z_SAP_HIERARCHY_DOWNLOAD, to download our hierarchies to then test the upload.
However, this has not worked.
Does anyone have the record layout that the flat file must be in to upload a simple 2-level hierarchy (for example groupings of 0vendor)?
Thanks, Doug

I think the URL you mention is http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm.
This contains the record layout instructions as follows.
5. Maintaining the hierarchy:
Choose Hierarchy Maintenance, and specify a technical name and a description of the hierarchy.
PSA Transfer Method: You have the option here to set the Remove Leaf Value and Node InfoObjects indicator. As a result, characteristic values are not transferred into the hierarchy fields NODENAME, LEAFFROM and LEAFTO as is normally the case, but in their own transfer structure fields. This option allows you to load characteristic values having a length greater than 32 characters.
Characteristic values with a length > 32 can be loaded into the PSA, but they cannot be updated in characteristics that have a length >32.
The node names for pure text nodes remain restricted to 32 characters in the hierarchy (0HIER_NODE characteristic).
The system automatically generates a table with the following hierarchy format (for sorted hierarchies without removed leaf values and node InfoObjects):
Description
Field Name
Length
Type
Node ID
NODEID
8
NUMC
InfoObject name
INFOOBJECT
30
CHAR
Node name
NODENAME
32
CHAR
Catalog ID
LINK
1
CHAR
Parent node
PARENTID
8
NUMC
First subnode
CHILDID
8
NUMC
Next adjacent node
NEXTID
8
NUMC
Language key
LANGU
1
CHAR
Description - short
TXTSH
20
CHAR
Description - medium
TXTMD
40
CHAR
Description- long
TXTLG
60
CHAR

Can a hierarchy datasource be copied in R/3 system?

Hi All,
I have a requirement wherein I have to copy an existing hierarchy datasource. Is it possible to copay a hierarchy datasource? If yes, how?
Is it possible to create a hierarchy datasource in R/3? if yes, how?
Please reply.
Thanks and regards
Rajib

Hi
You need to do some workaround
The user exit EXIT_SAPLRSAP_004 in the R/3 source system allows you to enhance your hierarchy DataSources.
Configure the Extractor in R/3
create an empty hierarchy,
generate the DataSource, and
populate it with data from the table via EXIT_SAPLRSAP_004
Edited by: Pavan on Feb 11, 2010 10:53 AM

Problem in activating the Hierarchy Datasource for 0CostElmnt

Hello Experts,
Can you please suggest, how to activate the standard hierarchy datasource -0costelement for mapping it to the respective hierarchy (0CostElement). For this I have replicated the datasource and activated using BI Content. But inspite of this, respective datasource is not getting activated in SAP BI.
So can anyone suggest me how to activate the datasource.
Thanks
PT

Hi PT,
Based on your SAP patch level & error message number, y need to apply SAP note to resolve this error. If you provide correct error message, so we can suggest. Try to active business content grouping the before & after words. Sometime dependent objects my missed also y may get inactive in Transfer rules.
Thanks & Regards,
Krishna.

How to create hierarchy datasource in BI7.0

I want to create hierarchy datasource in BI7.0(Patch level:15), and my source systems is Oracle DB. Who can tell me how to do?
Thanks.
Edited by: Ricken Fan on Mar 5, 2008 9:44 AM

Hi,
SAP is not Supporting to create Hierarchy Data Sources in BI7.0
You have to create Hierarchy Data Sources in 3.x only.
Reg
Pra

Hierarchy datasource is showing wrong number of records

Hi,
I have to load hierarchies from r/3 to BW.when i test my hierarchy DataSource in RSA6 number of records its showing is 40,where as my R/3 system has 45 records for the same hierarchy.Can any one please let me know why its showing different number of records and how to overcome this problem.

Hello VaKa,
How r u ?
Just load the data to the PSA and identify which records are missing, you can do this, u have small amount of data. Then you can identify which 5 records are missing and it will help to find the reason as well.
Best Regards....
Sankar Kumar
+91 98403 47141

How to migrate hierarchy datasources?

hi friends
im in the process of migrating the datasources from 3.5 to 7.0 .
i have migrated 0profit_ctr_attr and 0profit_ctr_text and i need to migrate 0profit_ctr_0106_hier.. i right clicked on it and i didnt find migrate option....
can any one plz give me a sol for migrating the hierarchy datasources..
Thanx in adv
ravi

As of now you cannot migrate hierarchy datasources. You still have to stick to the older way of loading hierachies. TR/Infopackage..
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/682cacb88f297ee10000000a422035/content.htm

Transport is in modifiable status, But i could not able to delet the object

Hi All,
I have created one development transport and one customizing transport(my colleague), now i want to delete the some objects which contain these change request. But i can not able to delete those objects even though change request is in modifiable status.
How to delete the objects contain in modifiable transport?

Hi Arun,
It seems working now
Can add/delete the objects for released transport?
is it possible.
Two more question:
1). I have released one change request, now i want to change the description of the request, how to do that?
2).While executing transports, RDD* (RDDIMPDP) job has canceled in the target system.then what should i do?

Cant Migrate 3.x Hierarchy Datasource

as the title says we can migrate all our datasources from 3.x to bi7 but we do not get the option with the hierarchy datasources, is there any reason for this and if so what are the steps to overcome this.
Thanks

Hi,
There is no new method to create Hierarchy in BI7.0 So, we have to follow the same steps as in BW 3.5.
So,There is no need to migrate.
Thanks & Regards,
Dinakar.

Creating Custom Hierarchy dataSource

hi all,
i want to Creating Custom Hierarchy dataSource from Ztable to extract data from r/3 side to bw.(not for attr and text)
I know we have two approach :
1) by creating a xls file.
2) by making a Z function Module.
Can anybody tell which one is better? and Why?
Wat the steps to do if i m using second approach means via function Module
Regards,
San!

hi,
Hi,
Pls check out the whitepaper below -
https://www.sdn.sap.com/irj/sdn/nw-bi?rid=/library/uuid/50cbb737-b36f-2c10-c78b-b63d116ce313

How to create a hierarchy datasource in BW

Gurus-
Here is my requirement.
I am asked to create a DSO and equivalent datasource for profit center. How to create a datasource for profit center in BW?

what does ur DSO has to do with the hierarchy? And subject line and the subject are misleading.
these are some of the std PCA datasources:
0PROFIT_CTR_0106_HIER
0PROFIT_CTR_ATTR
0PROFIT_CTR_TEXT
0EC_PCA_1                         Profit Center: Transaction Data on Accounts
0EC_PCA_2                         Profit Center: Statistical key figures
0EC_PCA_3                         Profit Center: Actual Line Items
0EC_PCA_4                         Profit Center: Actual Line Items Periodic Transfer

A Batch Input to modify status TRAI of an activity

Hello and thank you in advance for your help.
I^ve created an ABAP program in order to create a batch Input that could modify the Status TRAI for an activity.
I upload a file with a list of project, activity and a X to validate or no the status TRAI.
For example, in the file uploaded we have:
C1/4563798/020    0003   X
1- I execute my program to create the batch input.
2- I process my Batch Input.
The batch Input launch the transaction CJ20.
We select the good WBS but sometimes it doesn't select the good activities.
In fact when we have selected our WBS:
We have access to this screen:
line 1                A blank line
line 2                C1/4563798/020    0001   X
line 3                C1/4563798/020    0002   X
line 4                C1/4563798/020    0003   X
In my program i select the line 4 in order to open the activity 0003.
Unhappily i have found some project like that:
line 1                A blank line
line 2                C1/4563798/020    0001   X
line 3                C1/4563798/020    0003   X
line 4                C1/4563798/020    0004   X
So when i'm trying to select the line 4 to have activity 003, i do not have the activity 0003 but the activity 0004.
Can you help me please finding an other solution:
1- I can may be check the value of the activity that i've selected but i don't know how to do that.
2- Or find an other transaction in wich i could access immediately to my activities.
CJ20 allows to access project and WBS
CN22 allows to access Network.
But for activities ?????
Thank you very much for your help
This is a part of my program:
PERFORM BATCH_CALL_SCREEN USING: 'SAPLCJTR' '108'.
PERFORM BATCH_FILL_FIELDS USING: 'TCJ41-ALL_ACT' 'X'.
PERFORM BATCH_FILL_FIELDS USING: 'proj-pspid' ''.
PERFORM BATCH_FILL_FIELDS USING: 'PRPS-POSID' PROJN.
PERFORM BATCH_FILL_FIELDS USING: 'BDC_OKCODE' 'STTR'.
In CJ20 i select my WBS and change structure planning. I go on the second mitre "Basic Dates
PERFORM BATCH_CALL_SCREEN USING: 'SAPLCJTR' '230'.
PERFORM BATCH_FILL_FIELDS USING: 'BDC_CURSOR' W_INDEX.
PERFORM BATCH_FILL_FIELDS USING: 'BDC_OKCODE' 'PICK'.
I select the line which contains the acticity to change
PERFORM BATCH_CALL_SCREEN USING: 'SAPLCONW' '1000'.
PERFORM BATCH_FILL_FIELDS USING: 'BDC_OKCODE' 'STAS'.
I go on the screen to change status
PERFORM BATCH_CALL_SCREEN USING: 'SAPLBSVA' '0300'.
PERFORM BATCH_FILL_FIELDS USING: 'BDC_OKCODE' 'DIRI'.
I open the window to enter the status TRAI
PERFORM BATCH_CALL_SCREEN USING: 'SAPLBSVA' '0882'.
IF STAT = 'X' OR STAT = 'x'.
    PERFORM BATCH_FILL_FIELDS USING: 'JESTD-ETX04' 'TRAI'.
    PERFORM BATCH_FILL_FIELDS USING: 'BDC_OKCODE' '/00'.
I put the status of my Activity in TRAI
ELSE.
    PERFORM BATCH_FILL_FIELDS USING: 'JESTD-ETX04' 'TRAI'.
    PERFORM BATCH_FILL_FIELDS USING: 'BDC_OKCODE' 'LOES'.
I cancel the status TRAI of my Activity
ENDIF.
PERFORM BATCH_CALL_SCREEN USING: 'SAPLBSVA' '0300'.
PERFORM BATCH_FILL_FIELDS USING: 'BDC_OKCODE' '=BACK'.
PERFORM BATCH_CALL_SCREEN USING: 'SAPLCONW' '1000'.
PERFORM BATCH_FILL_FIELDS USING: 'BDC_OKCODE' '=BACK'.
PERFORM BATCH_CALL_SCREEN USING: 'SAPLCJTR' '0230'.
PERFORM BATCH_FILL_FIELDS USING: 'BDC_OKCODE' '=BUTV'.
I save my project changed.

Hi Loic,
            Goto CN22 -> Enter Network No -> press F7
you can able to the see the activities now. If i am not matching your requirement. give me ur requirement in detail. I will do recording for u
Jai

Datasources are inactive status in r/3

hi frds,
i am facing strange issue..
I have activated the MM related datasources 2lis_02_hdr and itm in LBWE in R/3 Devmnt and transported them into R/3 prod, but still those are in in-active status only in R/3 prod..
in transport log i am seeing some warning msgs..
<b>Table ZZMC02M_1HDR was activated with warnings
Message no. DO520
(W- Enhancement category for include or subtype missing )
Table ZZMC02M_1ITM was activated with warnings
Message no. DO520
(W- Enhancement category for include or subtype missing )</b>
and i have selected industry sector as 'standard'
we are into ECC6, Am i missing anything ?
pls share your experiences
thanks
Message was edited by:
Sha BW

Hi Vidya,
My ques is when we do all the customizations in LBWE for any datasources , system prompts a request...
As Mahesh said, in LBWE that request should be assigned to customizing request not workbench reqst ... but im unable assign the request to customizing request 'coz the system is prompting workbench reuquest.....
i have already created 1 customizing reqst in se01.. how can i use this custmizin req in lbwe
im doing all the customizations in dev box only..
thanks

Hierarchy Datasources in modified status

Similar Messages

Maybe you are looking for