Hierarchy exit variable

<Moderator Message: please do not post your questions twice. Follow up the replies in your [other thread|hierarchy customer exit variable]>
Hi,
I need to change the hierarchy each and every year in my query.I want to create a customer exit variable for that.
hierarchy for 2008 is PROFITCENTRE2008
hierarchy for 2009 is PROFITCENTRE2009
Now i need to have a variable which can change the last 4 digit of the hierarchy name.The last four digit is nothing but current year.Could anyone send me the code for this.
Edited by: Siegfried Szameitat on Dec 12, 2008 1:10 PM

Thanks for your help.
Could you explain me please what does the code I wrote and your modification (I have not tried yet)?
I took this piece of code from an existing function module but due to my Abap level I can't understand what I do. I think that BPS doesn't undertands where (in which level) to search the node. Is there in the code you wrote an information related to the level where the node is?
Many thanks
Sorel

Similar Messages

  • Hierarchy Exit variable in BPS

    Hi,
    I have a pb:
    I have a hier  (ZHIER) based on InfoObject YIndic:
    - Node : Text node
              - Region : Characteristic node (char: Yregion) ex: 1
                       - Dpt: Text node   ex: 1P2
                              - Indic : Characteristic node (char: YIndic)
              - Region : Characteristic node (char: Yregion) ex: 2
                       - Dpt: Text node ex: 2P3
                              - Indic : Characteristic node (char: YIndic)
    In planing Layouts (BPS), I'd like to display only Indics related to the Dpt and the region of the user. So I'd like to use a Hierarchy Exit variable to take the right node.
    I wrote the following code (I replaced working variables by real values):
      ls_hiersel-chanm = 'YINDIC'.
      ls_hiersel-hienm = 'ZHIER'.
      ls_hiersel-nodename  = '1P2'.
      ls_hiersel-hiever   = 'A'.
      ls_hiersel-hiecha   = '0HIER_NODE'.
      ls_hiersel-dummy_leaf   = ''.
      ls_hiersel-dateto   = '99991231'.
      CLEAR ls_chadep.
      ls_chadep-chanm = 'YREGION'.
      ls_chadep-chavlint = '1'.
      APPEND ls_chadep TO ls_hiersel-to_chadep.
      INSERT ls_hiersel INTO TABLE et_hie_nodes.
    ENDFUNCTION.
    My problem is that when I launch my layout, the system tell "the node 1P2 doesn't existing" but node is effectively existing. I thing that BPS doesn't know where to search my node but I took this piece of code from another function and I don't know how to tell to BPS where to search the node. It's maybe at the end of the code but I'm a Beginner in ABAP.
    Can anybody can help me please?
    Many thanks.
    J Sorel

    Thanks for your help.
    Could you explain me please what does the code I wrote and your modification (I have not tried yet)?
    I took this piece of code from an existing function module but due to my Abap level I can't understand what I do. I think that BPS doesn't undertands where (in which level) to search the node. Is there in the code you wrote an information related to the level where the node is?
    Many thanks
    Sorel

  • Exclude a hierarchy node by using exit variable (not in query designer)

    Hi gurus!!
    I have a hierarchy for the infoObject 0COSTELMNT. Depending on the user who executes the report, the node '0599ADJUSTMENTS' must be displayed or not.
    I am trying to solve it by using an exit variable:
    Varible Type: Hierarchy Node
    Processing : Exit
    On the exit, I have entered the following code:
          IF ( sy-subrc = 0 ).
              l_s_range-sign = 'E' .
              l_s_range-opt  = 'EQ' .
              l_s_range-low = 'AJUSTES'.
              APPEND l_s_range TO e_t_range.
         ENDIF.
    But unfortunately does no work!!
    Any ideas?
    Thanks in advance
    Regards.
    Carmen Rodríguez

    Hi,
    Check the below link gives good knowledge on variables:
    http://help.sap.com/saphelp_nw04s/helpdata/en/cf/579b3c494d8e15e10000000a114084/content.htm
    Reg
    Pra

  • No Query Result After Using Hierarchy Node Variable (Customer Exit)

    Hi
    I have problem at my query. It doesn't show anything in BEx but when i check the data in BW using tcode LISTCUBE i can display the data.
    This problem happen when i change the restrictions for one of characteristic in filter value.
    The characteristic is custom Infoobject (ZCPARTNER), which like Infoobject Partner Unit.
    Previously I set the restriction with constant value, example : A500,A700,A710,A720,A730,A740 and it worked before.
    But when I change it using hierarchy node variable (customer exit), this problem is arise.
    Here is my code at ZXRSRU01
      WHEN 'ZHIEPART'. --> hierarchy node variable
       BREAK-POINT.
        IF i_step = 2.
        Read from ZZCONSGR information
          LOOP AT i_t_var_range INTO loc_var_range
             WHERE vnam = 'ZZCONSGR' OR vnam = 'ZOCONSGR'. --> read input value from consolidation group variable
            CLEAR l_s_range.
            CLEAR l_s_range-low.
            IF loc_var_range-low EQ '000000000000030000'
               OR loc_var_range-low EQ '000000000000010130'.
              l_s_range-low = 'MEZBUNITMDI'.
              l_s_range-high = '0HIER_NODE'.
            ELSEIF loc_var_range-low EQ '000000000000040000'
               OR loc_var_range-low EQ '000000000000010160'.
              l_s_range-low = 'MEZBUNITMPI'.
              l_s_range-high = '0HIER_NODE'.
            ENDIF.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
            APPEND l_s_range TO e_t_range.
            EXIT.
          ENDLOOP.
        ENDIF.
    Here the hierarchy in BW system:
    XXX Cons Unit Hierarchy Set; InfoObject ; Node Name
    - XXX Cons Unit Hierarchy Set; 0HIER_NODE; ZBUNITALL
      - XXX DownStream ... ; OHIER_NODE; MEZBUNITMDI
         - ME/A730; 0CS_UNIT; MEA730
         - ME/A740; 0CS_UNIT; MEA740
      - XXX Power ; OHIER_NODE; MEZBUNITMPI
        - ME A800 - A808; OHIER_NODE; MEZBUNITMPI
        - PT Mitra xxx; 0CS_UNIT;  MEA820
    Anyone can help my problem? Thank you
    Regards,
    Satria B Tandyono

    Hi Satria,
    Instead of following code ---
    CLEAR l_s_range-low.
    IF loc_var_range-low EQ '000000000000030000'
    OR loc_var_range-low EQ '000000000000010130'.
    l_s_range-low = 'MEZBUNITMDI'.
    l_s_range-high = '0HIER_NODE'.
    ELSEIF loc_var_range-low EQ '000000000000040000'
    OR loc_var_range-low EQ '000000000000010160'.
    l_s_range-low = 'MEZBUNITMPI'.
    l_s_range-high = '0HIER_NODE'.
    ENDIF.
    try this ---
    IF loc_var_range-low EQ '000000000000030000'
    OR loc_var_range-low EQ '000000000000010130'.
    l_s_range-low = 'MEZBUNITMDI'.
    ELSEIF loc_var_range-low EQ '000000000000040000'
    OR loc_var_range-low EQ '000000000000010160'.
    l_s_range-low = 'MEZBUNITMPI'.
    ENDIF.
    Note : whenver the option is EQ, the system takes only low value.

  • Customer Exit variable on Hierarchy Node

    Hello Experts
    I am in the process of creating a Customer Exit variable on a Hierarchy node. This will be populated at run time based on the value of a Characteristic variable.
    The Hierarchy is activated and included in the roes of the report. I would like the end result to be exactly the same as it would if I had manually entered a variable in Hierarchy node variable
    I have written exits before for Characteristic variables, however, I am unable to get this to work for Hierarchy Node variables. Please find below the code I have prepared so far. I follow the approach of creating a seperate executable program for each Customer Exit variable. This Program will be called by the Exit.
    DATA: l_s_range TYPE rrrangesid.
      DATA:l_s_var_range TYPE rrrangeexit.
      FIELD-SYMBOLS : <fs_var_range> TYPE rrrangeexit.
      IF i_step = 2.
        READ TABLE i_t_var_range
        ASSIGNING <fs_var_range>
        WITH KEY vnam = 'ZMO_WBS_LVL2'.  " Characteristic variable
        IF sy-subrc = 0.
          l_s_range-low = <fs_var_range>-low.
         l_s_range-high = '0HIER_NODE'.*
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
        endif.
      endif.
    I would be obliged if anyone can help me understand what is being overlooked. The Query is presently returning "No Applicable data found"
    Thanks in advance
    Regards
    Zubin Kurian

    Hello
    I have made the changes. Please refer the Code below for reference. This code will function display only those Nodes at and below the WBS element(s) that were entered into the variable ZMM_WBS_ELEMT
    IF i_step = 2.
      SORT i_t_var_range BY VNAM.
        LOOP AT i_t_var_range ASSIGNING <fs_var_range>
             WHERE
                  VNAM = 'ZMM_WBS_ELEMT'. " Multiple Value, & Mandatory
           IF <fs_var_range> IS ASSIGNED.
             CLEAR: l_s_range.
                l_s_range-low  = <fs_var_range>-low.
                l_s_range-high = '0WBS_ELEMT'.
                l_s_range-sign = 'I'.
                l_s_range-opt  = 'BT'.
                APPEND l_s_range TO e_t_range.
                ZVAR_COUNT = 1.
           ENDIF.
        ENDLOOP.
    Edited by: Zubin Kurian on May 10, 2011 4:38 PM

  • Cannot determine a value for an exit variable in the Formula fn w/p empty

    Hi All,
    We have an exit variable Z_EX_AR_VAR, the would read a hierarchy node input variable (Z_HN_AREA), which is furthur based on a hierarchy input variable (Z_HR_AREA), and wouuld return the first leaf of it.
    We have implemented a input ready query based on this exit variable and it is getting the first node and is input ready and saves the data to the database.
    It works well in the query when we have filtered the characteristic with the hier and hier node and the exit variables.
    We need to use the same value to be used in the Fox function.
    As per the requirement, the Fox function has to process the zero (empty) records.
    So, we have customized formula function to process emptry records.
    And in the function of type formula function that processes empty records, we have used the following statement.
    DATA AR type ZAREA.
    AR = VARI ( Z_HN_AREA, HIENM=Z_HR_AREA, 1).
    We are getting the following error message:
    Cannot determine a value for the variable Z_HN_AREA.
    Planning function ended with errors.
    What is that we are doing wrong here. Is it with the 'Process Empty Records' function that cannot read the variable.
    How come this variable is working in the query and it is not working in the FOX.
    We have done the variable to variable binding in the WAD also. Still the same problem.
    Any ideas? Thanks in advance.
    Best Regards,
    - Shashi
    Thanks in '

    Hi All,
    Michael Wolf from SAP confirmed that we cannot use VARiable read functions in the customized Formula function that processes the zero (empty records) as he spoke to SAP AG about the issue.
    Hence we have made a work around by creating a valid record using a dummy key figure in the Custom Formula function that processes empty records so that in the next step, the regular Formula function would get executed, where we could access the variable values by using VARV, VARI functions.
    Thanks,
    - Shashi

  • Error Message : " No value could be determined for Customer Exit Variable "

    Hello BI Experts ,
    I have created a "ZYTD_PERIOD" Customer Exit Variable  Interval  Mandatory and ready for input check mark removed.
    The reference character is '0FISCPER' .
    I want to have YTD figures when the user enter single Fiscal Year Period for variable 0P_FPER.
    So I have written below code in SE37 : EXIT_SAPLRRS0_001 and include program : ZXRSRU01
    ==================================================================
      case i_vnam.
                  WHEN 'ZYTD_PERIOD'.
                  IF I_STEP = 2.
                  LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
                  CLEAR L_S_RANGE.
                  L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
                  L_S_RANGE-LOW+4(3) = '001'.
                  L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
                  L_S_RANGE-SIGN = 'I'.
                  L_S_RANGE-OPT = 'BT'.
                  APPEND L_S_RANGE TO E_T_RANGE.
                  EXIT.
                  ENDLOOP.
                  ENDIF.
    ===================================================================
    After that I use this 'ZYTD_PERIOD' variable in the query .
    Also I have used the variable 0P_FPER in another structure.
    When I execute the query by entering the value of 0P_FPER as 010.2009 or any other value ,
    I am getting below error message ,
    *No value could be determined for variable ZYTDPERIOD*_
    Below is details of this Error message ,
    Note that I have proper Master and Text data for 0CO_AREA and 0COMP_CODE loaded into BI.
    =======================================================================
    Diagnosis
    This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
    Termination message BRAIN 632 appears:
    Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
    System Response
    1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
    With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
    With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
    0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
    2. Cause of Error
    The attributes for the controlling area (InfoObject 0CO_AREA) or company code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the attributes for the controlling area are not active in the BW system.
    Check whether this is the cause of the error in your BW system. Display the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction se16.
    Application CO:
    Check whether the attributes 'fiscal year variant' (field FISCVARNT) and 'profit center local currency currency type' (field CURTP_PCA) are filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the error is with variable 0P_FVAEX. If the currency type of the profit center's local currency in OBJVERS = 'A' is empty, then the error is with variable 0P_CTPCA.
    Application FI:
    Check whether or not the attribute 'fiscal year variant' (field FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant is empty in OBJVERS= 'A', then the error is with variable 0P_FVAEX.
    Procedure
    Using InfoSource 0CO_AREA, load the attributes for the controlling area or company code into your BW system.
    Afterwards, activate the attribute changes in your BW system. To do this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes', functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or 0COMP_CODE from this list, and activate the attribute changes.
    =====================================================================================
    Is there any special settings needed before writing BEx Customer Exit ?
    I have already created a project in CMOD and assinged a proper RSR00001
    and EXIT_SAPLRRS0_001 and project is active.
    Any help please ....
    Regards ,
    Amol

    My Code is as below ,
              case i_vnam.
                  WHEN 'ZYTD_PERIOD'.
                  IF I_STEP = 2.
                  LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
                  CLEAR L_S_RANGE.
                  L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
                  L_S_RANGE-LOW+4(3) = '001'.
                  L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
                  L_S_RANGE-SIGN = 'I'.
                  L_S_RANGE-OPT = 'BT'.
                  APPEND L_S_RANGE TO E_T_RANGE.
                  EXIT.
                  ENDLOOP.
                  ENDIF.
                  ENDCASE.

  • Hierarchy node variable - successor node data not displayed

    Hello,
    I have a query with a hierarchy in the ‘rows’ section. This hierarchy is restricted by a hierarchy node variable with the following settings: variable type ‘hierarchy node’; customer exit; single value; mandatory; not ready for input; cannot be changed in query navigation.
    The customer exit correctly supplies the node. However, only data for THIS node is displayed in the query results. And data for successor/underlying nodes is NOT displayed.
    I tried several things, including:
    - rightclick ‘Rows’ > ‘Display as a Hierarchy’
    - customer exit variable: multiple values instead of single value; optional instead of mandatory
    In the ‘Hierarchy Attributes’ for the hierarchy, nothing is checkmarked, except for Root/Totals Item Appears Above’ and ‘Drilldown start level = 00’. The hierarchy and its nodes are valid from 01.07.2005 to 31.12.9999.
    I have a feeling in what area the solution can be found, but I have no clue what to do further on with it. As a test I replaced the customer exit variable with a user entry variable. If I then execute the query, I can select either the ‘node’ or the ‘value’ (both with the same technical value!). If I select the node, I get all data, including data for successor nodes. If I select the value, I only get the data for the node, not the underlying successor nodes. For some reason, the customer exit variable behaves like the latter and not like the first. I do not know how to solve this.
    I would greatly appreciate if you could help me out of this issue here.
    Kind regards,
    Frank

    Hi,
    no, it doesn't. It just returns the data for the node and not for the underlying nodes.
    Frank

  • Refreshing Hierarchy node variable in BEx query with change in hierarchy

    Hi all,
    We have used a hierarchy node variable on Characteristic ZECCSAC (user-defined) and used it in a BEx query with default value set to a particular node value. Upto this, it is working fine.
    The hierarchy used in the query, with the hierarchy node variable, was later changed ( and in future it can undergo changes ). Since the number of records in the hierarchy are changing, the nodenames of the hierarchy nodes are changing. But the hier node variable default value is still set to the earlier nodename for that node description. So at runtime it is giving an error "ECCS Account Number is invalid"!
    Can anyone suggest how to refresh a hierarchy node variable default value each time a query is run so that the latest nodename is always taken ?
    Quick reply will be appreciated.
    Thanks

    Hi,
    You get this with User exits.
    Thnaks

  • Query Drilldown does not Invoke Customer Exit Variables

    We have a problem with performing a drilldown in a BEx Analyzer reprot, basically the client is a Trading company and they have inter company trading. We are using the Profit Centre as one of thre u201CFree Characteristicsu201D in the query and hence we are able to drilldown on a Characterictc by Profit Centre.
    We are using a couple of BEx query variables (Customer Exit variables) to determine the inter-area and extrenal area profit centres and these profit centres will be different based on the level of Hieracry node selected when the query is initially executed. For example if we assume a hierarchy with has one root node, 3 children under the root node and 2 grand-children under each of the 3 child nodes, now if we are at the root Node of the Hierarchy then every profit centre is internal and there are no external profit centres,  similarly if we are at the 2nd node (i.e. one of the child nodes) then everything under that node is internal and everything in the other 2 child nodes is external and so on.
    This is where the issue starts for us, since on the report if we select the the node we want to see the results for at the query rumtime (i.e. the Customer Exit Variables are invoked at I_STEP=2 and they select the other nodes of the hierarcy if any and group them into either external or internal)  then the results are correct. Now if we were to drilldown, i.e. We selected the root node and we drilldown on to see for example of the child nodes then the result are not correct, this becomes apparent when we drilldown further to the grand-child nodes.
    One logical explaination is that when we are doing the drilldowns the customer exit variables are not being invoked in the BEx analyzer report and hence they are not grouping the sums for the internal and external profit centres relevent to node selected in the Drill down.
    Does anyone have any suggestions regarding how to make this query work properly or show the correct results in BEx Analyzer (ideally), I have considered the Workbooks option but the client does not want Workbooks.
    Please let me know if there is a program etc we can customise to ensure that the Customer Exit variables logic is used when the user does a drilldown in the query or any other way to make it work.
    Many Thanks
    Jack

    Hi
    Just to aid anyone who is thinking what to do in a similar situation, I am aware that RRI or using workbooks are a couple of good alternatives (just that these are currently not being considered by the client, hence I am asking here).. Also, if someone has Business Objects WEBI then we can satisfy the requirement by creating a new Webi Report for each of the nodes and displaying it (similar to Workbooks but much nicer and faster) or we can get the Webi to execute the variables again during the drilldown... Unfortunately the client is not using Webi either... So the solution has to be in BEx Analyzer / Query designer based...
    If you have any thoughts on how I might be able to do what I want to do then please feel free, I am quite confident that I am not the 1st person to come accross this issue and someone somewhere has solved this issue. 
    Thanks

  • Hierarchy node variable: select multiple values at once

    Dear,
    We have a hierarchy node variable (Multiple single values, optional) on profit center. If I launch this query in the BEx, it is possible to enter multiple single values in one go. However, on the web, it is required to insert a new row for each extra value the we want to select. However, when selecting a filter value on the web, it is possible to select several values at once (by checking a checkbox).
    Is it possible to select several values at once in the selection screen on the web for this variable?
    Thank you!

    we recently had the same requirement and posted the question at SAP. their reply was : this is not possible. even through the exit it was not possible, due to the logic of the sql select when executing the query, it seems.
    concerning the fact if this would be possible in a near future, there was no reply
    M.

  • Using a hierarchy node variable in a BI 7 web template

    Hi all,
    I am searching for a way how to use a hierarchy node variable in a BI 7 web template. I have seen that there is a hierarchy web item, but I can only link that to a characteristic. I need to link the navigation item to a hierarchy node variable as I want to use the chosen variable value in a customer exit as well. Therefore the hierarchy web item is not working for me.
    Is there any web item that can be used to offer hierarchy node variables as navigation options in a web template?
    If you have any idea, every hint is highly appreciated!
    Cheers
    Tatjana

    The Filter panel will only display you the characteristics and key figures available in the query.
    If you want to add a combo box to make "on the fly" currency conversion, you'll have to do that by another way.

  • Error in customer exit variable

    Hi All,
    My requirement is end user will enter fiscal year and in report out put I need to display fiscal year periods.
    For this I have created two variables
    1.Fiscal year-Manual Input/Default value-Single value-Mandetary-Variable is ready for input.
    2.FiscalyearperiodCustomer ExitInterval-Optional
    DATA : fiscyear1 TYPE numc4,
          i_fiscper_high TYPE /bi0/oifiscper.
    DATA: datein LIKE  sy-datum .
    CMOD Code is as below
    CASE i_vnam.
    WHEN  'ZFISCVAR'.
        LOOP AT i_t_var_range INTO loc_var_range
                             WHERE  vnam = 'ZFISCYER'.
          CLEAR l_s_range.
          fiscyear1 = loc_var_range-low(4).
          CONCATENATE fiscyear1 '001' INTO i_fiscper_high.
          l_s_range-low = i_fiscper_high.
          l_s_range-high = i_fiscper_high.
          l_s_range-sign = 'I'.
          l_s_range-opt  = 'BT'.
          APPEND l_s_range TO e_t_range.
        ENDLOOP.
    But we are getting error after entering fiscalyear
    error message --Value 2009001 for uesr exit variable xxxx is invalid.
    Regards
    Albaik

    Hi All,
    Below is the code and there is no problem with code but there was some problem with Fiscal year varient and solution is we went to source system -right click-Transfer global settings---- and maintained  Fiscal year varient 
    DATA: l_s_range TYPE rsr_s_rangesid.
    DATA: loc_var_range LIKE rrrangeexit.
    DATA: datein LIKE  sy-datum .
    DATA: L_S_RANGE_2 TYPE RSR_S_RANGESID.
    DATA : I_FISCPER_HIGH TYPE /BI0/OIFISCPER ,
           I_FISCPER_LOW TYPE /BI0/OIFISCPER.
    DATA : FISCYEAR1(4), FISCYEAR2(4),CALMONTH TYPE /BI0/OICALMONTH .
    WHEN  'ZFISPERIOD'.
        LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
                             WHERE  VNAM = 'ZFISYEAR'.
          CLEAR L_S_RANGE.
          FISCYEAR1 = LOC_VAR_RANGE-LOW(4).
          CONCATENATE FISCYEAR1 '001' INTO L_S_RANGE-LOW .
             L_S_RANGE-SIGN = 'I'.
          L_S_RANGE-OPT  = 'EQ'.
          APPEND L_S_RANGE TO E_T_RANGE.
        ENDLOOP.
    ENDCASE.

  • Default value of BeX customer Exit variable not Displayed in WeBI??

    Hello Experts,
    We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
    1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
    2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
    3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
    So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
    Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
    and we are on SAP BW 7.1 and BOXI 3.1 SP4.
    Regards,
    Vipul
    Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

    Hi,
    See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
    WebI will prompt when executed, but the default values calculated by the user exit  - do not appear.
    Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
    Cause
    This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
    Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
    Characteristic variable > processing type > Customer Exit  is "Supported, without user entry"                                                                               
    -->  This should be understood as meaning "User will not be shown a prompt"
    regards,
    H

  • Need help in creating a user exit variable

    Hi all,
    I have created a query in which a key figure needs to be automated with an user exit variable.I want to derive the value of this key figure 'x' based on calender month.
    This key figure should get the cumulative value from the first month of the fiscal year till the calender year month entered while executing the query.
    I got a basic understanding on the User exits from SDN. But Im not sure how to implement this logic.
    I would really appreciate if you could provide me a detailed explanation of how to do this.
    Thanks in advance,
    Vinoth

    Hi
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208811b0-00b2-2910-c5ac-dd2c7c50c8e8
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6378ef94-0501-0010-19a5-972687ddc9ef
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2d99121a-0e01-0010-e78c-b1ae566a2413
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/how-can-i-set-bex-variables-in-i_step3-exit_saplrrs0_001-335232

Maybe you are looking for

  • How to transfer a number from a family Plan to a personal account?

    I need to transfer a # from a family Plan to another person outside the plan

  • My iPod Touch 5th Generation is severely cracked

    I shattered my screen even though it was in an otterbox case. I was wondering where I could take it or send it off to and how much it would cost to get it fixed. Also, would I get to keep my same iPod but with a new screen or would I have to get a re

  • Erase hard drive w/o removing latest Mac OS version

    I am thinking of selling my iMac 27' because I need cash money. I downloaded and installed Lion on my Mac once I got it. My question is, Is there a way I can swipe my drive clean and still keep the latest version of the Mac OS installed on the drive?

  • Problems and pain....

    Oh lord, my iPod appears to be dead. I've tried hooking it up to the charger, and nothing happens...AT ALL. THe screen is just..blank. I was thinking that I could;ve accidentally switched on screen lock, if so, how can I tell?

  • StorEdge 3310 Slowness and "Memory Not Sufficient" Error

    Hello, I have a 3310 single-controller array who's LUN inexplicably became incredibly lethargic a couple of days ago. I checked the controller's event log and have the following message: "Controller WARNING: memory not sufficient to fully support cur