Hierarchy expand issue after EHP1 upgrade

Hi,
We had EHP1 upgrade in our BI system. After upgrade, when we are trying to open the hierarchy of period.
it should open from TOTAL to Q1, Q2, Q3 and Q4. Also when we should try to open Q1 then it should open Jan, Feb and Mar.
When i am trying to open the Q1, Insted of opening another column for Jan, Feb and Mar. It disappear the Q1 column from WB.
I tried to execute the query separately and it is working fine. Created a another new WB and it is also working fine.
Is there any one have such issue then please let me know whould could bea solution or any SAP Note ect?
Regards
Pankaj

Hi Pankaj,
I have also done the EHP1 upgrade and found the same issue....
Please run the program SAP_DROP_TMPTABLES and delete the hierarchy temporary tables.....It will definately solve your problem...
Please let me know in case of further clarifications...
Thanks,
Amit Kr.

Similar Messages

  • Performance Issues after an Upgrade

    Hello!
    We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
    1) What could be the causes/factors for the performance to degrade after an upgrade?
    2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
    3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
    Please let me know your thoughts on this.
    Thanks,
    - Krrish

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Performance issues after iOS4 upgrade

    hello everyone,
    I had notices few issues after I upgraded my iPhone 3GS:
    1- The screen is not rotating (when reading e-mails of flipping photoes).
    2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
    3- my Ipod is not working.
    4- I could not restore my device via the itune.
    my big question is there a real tangible benifit for this new upgrade?
    I really appreciate if you can help me soon
    thanks.

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Issue after solman Upgrade

    Dears,
    We were using solman 7.0, connected to ECC 5.0 server.
    We configured all activities EWA,System Monitoring and all were working fine.
    Now we upgraded solman to 7.01(EHP1) and R/3 to ECC 6.04 .
    1 - My first concern is after upgradation it should automatically pick details but is is still showing ECC5 in product version.
         We performed Read data from remote system also but still same issue.
    2 - When I go to EWA or system Monitoring I only find Prd server there while in solution's logical component all dev,qas and prd servers are available.Earlier before upgrading it was showing all systems in EWA and system Monitoring.
    Please suggest.
    Shivam

    Hello Shivam
    For point #2 please look closely at the solution containing the systsem and make sure that 1) The Dev, QAS systems are included, and are highlighted greeen ( Meaning they are status "Put in Solution"). It sounds a lot like this setting is not done, therefore the systems would not show when you would try and use that solution in functions like EWA, BPMON, etc.
    It sounds very much like when you create a new soltuion with PRD, QAS, DEV systems assigned, but only the PRD system is "Put in Solution" by default, so you explicitly need to right click the system in change/edit mode, and select "Put in Solution", then save.
    Now why this might be the case after the upgrade, I don't have an answer, but it is worth having a check as the symptom fits this issue. I would advise you check the solution itself and ensure the DEV and QAS systems and in status "Put in Solution".
    Hope this information is helpful.
    Regards,,
    Paul

  • SAINT hanging after EHP1 upgrade

    Hi All,
    one more issue i am seeing that, i am unable to run SAINT after EHP1 updagrade, i called SAINT tcode and when i click on START then its hanging,, please suggest on this.
    thanks
    Venkata

    Hello Venkata, Have you executed SGEN post support pack upgrade ? if yes could you please do a quick check if some components and objects are still remaining which needs to be re-generated ?
    Hope it helps.
    Regards, Amber S
    Infosys Technologies Limited.
    Edited by: Amber S on Feb 23, 2010 10:41 AM

  • I DVD Soft Frame template issue after Lion upgrade.

    Hello, I've just updated my os to Lion but the Soft Frame template in iDVD, (7.1.2) is no longer working correctly. The light coloured background which covers the right hand side of the frame is missing and has been replaced with black. This issue effects sub menus as well. Existiting and new projects using Soft Frame suffer from this problem... Any ideas would be gratefully received! I have tried re installing iDVD but this had no effect.

    OK I fixed it, sort of. The .tif file which provides the background image had disappeared. Even deleting IDVD and its themes and re-installing didn't work. So here's what I did:
    1) Make a new background. This can be any graduated colour field which you can make on any paint programme such as GIMP. However I grabbed the background from the `Forever' theme which is beige and adjusted the hue to turn it from brown to the blue which was close to the old 'Soft Frame' backing.
    Here's how to find the 'Forever' background:
    Go to your hard disk and look for Library/Application Support/iDVD/Themes/iDVD7/Forever-Main.theme
    CTRL click on it and select `Show Package Contents'
    Expand the contents folder and then the resources folder and look for the .tif file marked Forever-Background.tif
    Drag this into your photo editing programme and change the colour to what you want.
    Save the new file as tpt.tif on your desktop (there is a reason for this filename)
    2) Replace the defective backgounds in the `Soft Frame' themes
    Go to your hard disk and look for Library/Application Support/iDVD/Themes/iDVD7/Softframe-Chapters.theme
    CTRL click on it and select `Show Package Contents'
    Expand the contents folder then the resources folder and look for the file marked tpt.tif and delete it
    Drag the tpt.tif file you saved to your desktop into the Resources folder
    Now do the same thing in Library/Application Support/iDVD/Themes/iDVD7/Softframe-Extras.theme
    And do the same thing in Library/Application Support/iDVD/Themes/iDVD7/Softframe-Main.theme
    Next time you launch iDVD it will pick up the new backgrounds.
    It took me about 10 minutes.
    Now I've found where the backgrounds are stored (if you select Project...project info in the iDVD menu the media pane lists the full path) I realise it is easy to put your own backgrounds into any of the existing projects.
    I hope this helps.
    iDVD background missing after Lion upgrade 

  • IPhone syncing issues after iTunes upgrade

    Hi
    I just upgraded to iTunes 8.1.1 for Mac. During the install I got a kernel panic and had to restart. iTunes seems to be installed fine. When I connect my iPhone I get messages like "some content will not be copied to the iPhone as this computer is not authorized" or such like. So now several apps, videos and music has been wiped from the iPhone.
    I tried authorizing the computer but I just get "This computer is already authorized".
    there does not seem to be any particular link between the erased content. Some was purchased on the Mac and some on the iPhone, all from the iTunes store. Before I updated iTunes everything synced fine.
    I can d/l the apps again direct to the iPhone but I can't find a way to get the missing music and videos back on the iPhone. Very annoying.
    Would re-installing iTunes help?
    Any ideas?
    Thanks
    Chris

    Hi Chris,
    Try highlighting the one of the songs that will not sync in iTunes> cilck File> Get Info, check the account name and verifying you are authorizing the computer with correct account.
    If the issue persists, try removing the SC Info folder as shown here: http://support.apple.com/kb/TS1389
    If you still see the issue after removing the SC Info folder, try reinstalling iTunes as shown here: http://support.apple.com/kb/HT1224
    -Jason

  • SAP Query selection screen issues after ECC upgrade

    Hi all
    We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
    All the fields required are available.
    However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
    Can anyone help identify the issue so that the issue can be resolved?
    Thanks
    Vinodh S

    Hi N_niki
    There is no resolution as such.
    We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
    Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
    Hope this helps.
    Thanks
    Vinodh Sudhakaran

  • IP Phone 7921 / 7925 roaming issues after WLC upgrade from Version 7.2 to 7.3 and / or 7.4

    Hi,
    We have a customer which is using a Cisco WLC 5508 and 3502I APs. As he used the 7.2.103 release, There were no issues with VoWLAN. Now he needed new APs and ordered the 2602I. To use them he needed to upgrade the WLC to a 7.3 or later release. After the upgrade, he now encounters problems while roaming with the phones. The phones were tested with FW 1.4.1, 1.4.2 and 1.4.3.
    Configuration is set according to wireless voice design guides (VoWLAN DG 4.1, 7921 Deployment Guide). A Cisco TAC is also in progress, but they seem to be uncertain whether it is a wireless or CUCM issue, but I don't see a reason why it should be the CUCM when the only thing changed is the WLC Software Version.
    Is there anybody who is aware of such issues and can offer help?
    Thank you in advance.
    Best regards,
    Patrick

    Hi,
    we had a TAC ticket open with this customer and after some time, the TAC gave us the advise to use this release and the problems are now solved.
    So for others having the same issue: If you only need to support the 2600 APs, stay with the latest 7.2 release as there are some issues with the 7.3 and 7.4 release. If the customer requires HA, AVC or any of the new features + wireless voice, be very careful as it seems that the newer releases are having problems with that. I hope that Cisco will fix this very soon.
    regards,
    Patrick

  • Web dynpro ABAP- small issue after EHC1 upgrade

    Hi All,
    We have a Web dynpro ABAP report and it was working fine before the EHC1 upgrade. After the upgrade we noticed that the row count in ALV greed was disappeared.
    The report used to show 25 records per page and we were able to jump to the other pages by clicking on row count that was placed right below the report. Now report shows all the records and we only have scroll down option.
    Any idea where to look/ how to fix this issue?
    Regards,
    Mike

    In addition to applying that note, you also must deactivate Lightspeed rendering.  To me that's too extreme of a thing to do just to get paginators.  You loose the huge rendering performance improvements and it also means you can't use any of the new UI elements from 7.01.

  • Performance issue after PT Upgrade.

    Hakan and Team ,
    We recently moved from PT 8.48 TO PT8.51.18 on CRM 8.8 Application.
    After the upgrade, we tremendously saw big performance issues with PeopleSoft CRM Application. It freezes almost every day and all their work-force (call center representatives) go idle. It significantly impacts their productivity and eventually losing revenue.
    can you please suggest few suggestion or DOC that will help us to improve performance on application and DB side.
    Deatils :-
    SQL SERVER 2005
    Windows 2008 R2

    Hi,
    Performance is always a difficult one to tackle.
    It can be at so many levels, DB, Appserver, Webserver, CPU, RAM, Infra, etc.
    At OOW2012, David Kurtz gave a great highly detailed presentation on this subject: CON9210 - Performance Tuning for PeopleSoft Administrators
    http://www.myexpospace.com/oracle2012/smupload/scloader.cfm?SCID=257daa92-a6e8-411a-9806-2c22e56687d3
    See if you can apply some of the keypoints from his presentation.
    Regards,
    Hakan

  • Permissions issue after Mavericks upgrade

    I have just updated an early 2008 IMac with OSX Mavericks.
    All software running fine, but I noticed occassionally I was getting an authentication prompt on some files, didn't follow, but simply authenticated as and when I need to, I assumed it was when I moved files from my Mac Pro to my Imac.
    Having run the upgrade however, I get an error message to contact the vendor (Battlefront) as my copy of Combat Mission Battle for Normandy has lost its license.
    After the upgrade I had also purchased from the same vendor Combat Mission Fortress Italy. Having downloaded this and gone to run after copying to applications, this software gives me an error message saying unknown developer so I have got no where near installing a license.
    Having contacted the vendor and tried to get a work around, I am now getting the message it is you Mac not our software, despite the fact that all my other software is working fine (and the fact that the Combat Mission Battle for Normandy game worked fine until the upgrade).
    I do feel some sympathy for them, I do think the Mac has some sort of permission issue - I also probably compounded this by deleting a user which I did not recognise called 'wheel' which I suspect now is some form of default permisison.
    Anyone got any ideas, how do I 'reset' the system - I have tried fixing the permissions through disk utility.
    My vendor got me to run a sudo command through Terminal, but I got the message...
    sudo: unable to stat /etc/sudoers: Permission denied
    sudo: no valid sudoers sources found, quitting

    Update Saturday Jan 4, 2014
    Before my Mavericks upgrade on my Mac Pro, no problems ever (use my Mac 4-8 hours a day) using my Bose Companion 5 USB connected speakers. I've tried shutting the Mac down and plugging the Bose USB cable into another open USB port = no joy and other combinations. I tested the same Bose Companion 5 USB speakers on two other laptops with NO issues (ouch...they were running Windows 7) I have deleted the two .plist files, did the CMD+OPT+P+R reset, etc... = no change. Looked into Midi Audio Setup and did not see anything in there to change even though I tried a couple of things and no avail (there was no Garageband setting/entry).
    I still get a solid "BEEEEEEEEP" sound every 20+ seconds, when the sounds tries to toggle, by itself, between the Bose USB Audio device and the Internal Speakers.

  • Authroization issue after the Upgrade for Multiprovider

    Hello Experts,
    After the upgrade has carried out in my Quality system, I'm unable to execute a query because of the authorization issue with Multiprovider. But earlier the same Authorization was assigned to the ID.
    The Role in Q and the Role in P is same. Right now P is with 3.1 and Q is with BI7.
    In both the system I have the same Role. But in Q it says that: Error You have no Authorization for Multiprovider XXXX
    This is happening for only one Multiprovider in Quality system. There is no change in the Multiprovider from earlier structure to the present structure.
    Can anyone give me any idea as to how to solve this issue?
    Many thanks in Advance..
    Thanks
    Raman..

    Hi,
    Look at this link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a07122ae-8216-2a10-c9a5-996717a0648b
    Hope it helps

  • Portal Issue After SP Upgrade

    Hi All,
    We are facing issue in portal after SP upgrade.
    Back, Forward and History button are appearing at right side bottom.
    Did any one faced similar issue?
    Any solution?
    Regards,
    Jackie.

    Problem in my portal is
    History, Back and Forward options are appearing at the bottom of portal Page.
    In Dev System, it is looking good (Appearing @ top).
    In Quality and Production, it is appearing @ bottom.
    Regards,
    Jackie.

  • Issue after iOS4 upgrade

    iPhoto no longer recognizes/displays photos on my iPhone that have been saved via mms, email or 3rd party app (i.e. colorsplash) after recent upgrade to iOS4. It does show a photo placeholder and will ultimately import the photo but it will not display the photo. Displaying photos taken with the phone itself does not seem to be an issue.

    Same issue, but it seems to get worse over time. At first it was just the 3rd party camera apps that iPhoto only displayed dotted white outline. And as you said, if you highlight it, iPhoto imports the picture.
    But, it seems to get worse for me. After awhile, even the native camera app gets the same treatment and when you try to import the outlines, you get an error, where iPhoto says the picture format is invalid.
    If you delete the cache --user-->library-->cache-->com.apple.iphoto, it seems to reset things for awhile, allowing you to import the dotted outlines once again.

Maybe you are looking for