Hierarchy in CRM system?

Hi all
I have created a Base Hierarchy in CRM System by name  " BASE_PROD" and assign some category to this hierarchy.
Now the problem lies in:-
1. I am not able to assign certain set types which I want to use as they are used in other Base Hierarchy ( These Base hierarchy are copied from R/3 to CRM)
2. I don't want to use the hierarchy which are copied from R/3 to CRM and want to create them in CRM system itself.
3. When I try to delete these Base Hierarchy in CRM, system issue error Massage " Hierarchy R3PRODSTYP may only be changed in original system ER1CLNT200".
(here ER1CLNT200 is the R/3 system).What is the menu path in R/3 for deleting/changing these Hierarchy.
4.Is there any way to use same set types which are already assign to other hierarchy/Category.

Hi
Proceed as follows to remove one or more objects from the hierarchy:
Select the objects to be removed by positioning the cursor on each of the objects and activating Select/deselect node (for entity types) or Sel./desel. sub-tree (for data models).
Select Modeling object ® Delete assignment.
The objects are automatically removed from the hierarchy.
You cannot remove an object from the hierarchy without also removing all its subordinate objects.
Delete assignment only removes objects from the data model hierarchy in question.
Cheers

Similar Messages

  • Step by Tutorial for Creation of Customer Hierarchy in CRM System

    Dear Experts,
    I want to create a Customer Hierarchy in the CRM System. Need step wise tutorial to do the same with the help of an example. I already have the help.sap.com URL.
    Please help.
    Thanks & Regards,
    Tapan

    Customer hierarchies can be created by using transaction code BPH.
    Regards.

  • How to create BP hierarchy in CRM 5.0

    Hi All,
    We are planning to create customer hierarchy in our SAP CRM 5.0 system. In other words, we want to have different departments within a company to be identified as a BP while the company itself is also a BP. How to implement this in CRM?
    Greatly appreciated,
    Leon

    Hi Leon,
    Creating  a BP group (customer) hierarchy in CRM system is very easy. Please refer to the following very good help document : http://help.sap.com/saphelp_crm50/helpdata/en/12/cfea3b31aac554e10000000a114084/frameset.htm
    But in CRM 5.0 every time you create a hierarchy node and saves it, then hierarchy automatically get disappears. You need to implement the following notes in your system to get rid of this problem : 958122, 960384 and 956066
    <b>Do not forget to reward if helps</b>
    Regards,
    Paul Kondaveeti

  • How to find table name for the fields from Standard Extractor in CRM system

    How to find table name of fields from the standard extractor in CRM system ?
    e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
    Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

    Hi ,
    Please find the link below for understanding BW CRM analysis.
    http://help.sap.com/bp_biv135/html/bw.htm
    activate the CRM DSs by scenario:
    1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
    SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
    2) Activate the Business Content DataSources (tcode RSA5).
    Select/enter the application component and choose Execute (F8).
    To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
    To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
    3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
    As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
    You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
    The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
    All BW-Adapter metadata is considered when versions are compared:
    Header information (Table SMOXHEAD)
    Mapping information (Table SMOXRELP)
    Global selection conditions (Table SMOXGSEL)
    Attribute key fields (Table SMOXAFLD)
    Hope this helps.
    Regards,
    csm reddy

  • Add fields to rebate aggrement in CRM system

    hi ,
         i need to add some of fields to Rebate aggrement in the Tcode Crmd_order. For this the Business transcation type is <b>REBATE</b> . But when i go inside i don't find the <b>Rebate</b> transcation . Is there any alternative transcation type for the rebate aggrement .
    can u please him in finding out this issue?
    Regards,
    kiran kumar batchu.

    Hi ,
    Please find the link below for understanding BW CRM analysis.
    http://help.sap.com/bp_biv135/html/bw.htm
    activate the CRM DSs by scenario:
    1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
    SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
    2) Activate the Business Content DataSources (tcode RSA5).
    Select/enter the application component and choose Execute (F8).
    To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
    To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
    3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
    As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
    You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
    The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
    All BW-Adapter metadata is considered when versions are compared:
    Header information (Table SMOXHEAD)
    Mapping information (Table SMOXRELP)
    Global selection conditions (Table SMOXGSEL)
    Attribute key fields (Table SMOXAFLD)
    Hope this helps.
    Regards,
    csm reddy

  • How to extract Taxonomy data from MDMGX transaction of CRM system

    Hi all,
    I have a requirement on product master where in i have to upload data into MDM as taxonomy table from  MDMGX transaction in CRM system. Is it possible? If yes can anyone guide me the stepwise procedure as i observed it involves the Function Modules like MDM_COMM_CAT_ATTRIBUTES_EXTR.
    Thanks in advance
    Samatha

    Yes,
    You can very well do it. You need to define parameter " Hierarchy ID" in function module for exceptional cases in MDMGX.  This hierarchy ID you can get using Transaction COMM_HIERARCHY in CRM..
    This will solve you requirement....
    Thanks and Regards,
    Shiv

  • Download Brand Hierarchy to CRM

    Hello all,
    Please, could is possible to download the ECC Brand hierarchy to CRM?
    Grazie.

    Hi Luciana,
    1-Create new Brand Hierarchy called YBRANDHIER using transaction COMM_HIERARCHY
    2-Create a new product hierarchy application type Y1 to which you will assign the Brand hierarchy u2013 see table COMC_APPLICATION
    3-Create the Brand Hierarchy assignment to Application and the numbering scheme via IMG u2013 CRM->Master Data ->Product ->Product Category ->Assign Category Hierarchies to Applications ->Define Category Numbering Schemes
    4-The table COMS-HIER_R3(IMP (Settings for Importing Hierarchies) requires an entry reflecting settings for the new brand hierarchy table
    5-Settings for numbering scheme is based on the length of each of the three brand attributes.The numbering scheme is based on the length of each of the three brand attributes
    6-Create a Middleware Customising Object that will perform the download from R/3 to CRM (see transaction R3AC3). The customizing object will be called ZDNL_CUST_BRAND
    With this procedure, the ECC Brand will be in your CRM System.
    Rgds,
    Fábio

  • How to Sales Reports in CRM system

    Dear all,
    we have CRM and ECC system which are up and running.
    and also we have BW server connected to both systems. We want to see some reports like quotations report, sales orders report, deliveries report,etc... which are exclusively available in ECC system.
    Could any one of you explain me how to activate BW Infocubes and how to see Sd reports in CRM system with the help of BW system.
    Your suggestions will be highly appreciated.
    Thank you
    Raghu Ram

    Refer pre-configured scenarios and step by step guide here:
    http://help.sap.com/bp_biv170/html/BW/I15_EN_DE.htm
    For further more scenarios refer:
    http://help.sap.com/saphelp_nw70/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm

  • Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

    Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and  yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

    Thanks for your advise.
    However, I missed to mention that we have two set of users  One is for Finished Goods and another for Spares.
    Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
    As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
    Further, I tried to test one scenario through Processing Constraints but it did not work.
    Application
    OM
    Validation Type
    Entity
    Temp
    Short Name
    TBL
    Validation Semantics
    Created By
    Equal To
    User(Myself)
    Processing Cosntraint
    Application
    OM
    Entity
    Order Header
    Constraint
    Operation
    User Action
    Create
    Not Allowed
    Conditions
    Group
    Scope
    Validation Entity
    Record Set
    Validation Template
    101
    Any
    Order Header
    Order
    Above Created
    Please advise.

  • Business Content for Bill Up transaction in CRM system

    To all Experts,
    I'm currently working on a project that requires Bill Up transactional data ( Source Table: CMSD_BU ) to flow from CRM to BW system. I'm looking for Business Content that can fulfill this requirement. However, till to date, I couldn't find any information of such Business Content. I'm not sure if such BC exist. Can anyone help if you have experience implement this data flow?
    When searching for the DataSource / Extractor, I found BW Extract Structure CMST_BU_BW and CMST_BU_BW_C in the CRM system. But couldn't find any DataSource for both extract structure. Not sure if we need to install any support pack in order make the BC available in the system. Please help if you have any idea. 
    Thanks in advance.
    Regards,
    Hui Pin

    Hi Shalini,
    The document is replicated from ECC to CRM without any errors.
    For this document I just want to create follow up transaction in CRM.(I dont want to change the document in CRM)
    The follow up transaction is in display mode. this is my problem.
    Hi Rekha:
    I have done following setting in CRM to create follow up transaction in CRM for the document which is replicated from ECC to CRM.
    1)     Defined the Copying Control for Transaction type
    2)     Defined Copying Control for Item categories
    3)     Defined Item category determination when copying
    Thanks in advance,
    Regards,
    -Rahul.

  • I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

    I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

    Hi,
    I could resolve the issue since there were lot of issues after system copy.
    1. During distribued to Cenrtal system - system copy.
    You need to combine both DB and CI export copies in one folder during which one thing can happen.
    SOURCE.PROPERTIES - this file will be there in DB export JAVA folder and also CI export JAVA folder where
    DB SOURCE.PROPERTIES file doesn't have an entry of "src.ci.host". This will stop the SAPINST with error and after modifying the file "SOURCE.PROPERTIES" Traget System Copy finishes without any issue.
    Then after this stage I encountered an issue with bind hosts entry in config tool which was due to virtual host name usage in my HACMP setup due to whcih JAVA gives a startup problem.
    I eliminated this issue also.
    After JAVA started I faced an issue with XI related navigations.
    ecchangeProfile url still had an entry of Production System. This may be a bug.
    After changing that entry, exchangeProfile was downloaded but it had all the source system host entries which were manually changed.
    Now I can access all the XI related navigations.
    I need to also perfrom SGEN and Profiles import.
    Do I need to change any additional settings after this so that my production and DR can work without any issue?
    Do you have any additional checks which I can perfrom to ensure my DR systems consistency before I start the log shipping from Production?
    Regards,
    Rajkumar

  • Error while downloading Contacts from R/3 to CRM system

    Hi All,
    I am trying to download Contacts from R/3 to CRM system.
    Through Initial Download. For this i have set filters through Tcode: R3AC1
    as on KNVP and KNVV for the field VKORG.
    As we have our requirement to download contacts based on or differentiating
    on 'Sales Org".
    We have downloaded our Accounts properly without any errors.
    But for Contacts we are facing issues such as one or more extra
    relationships are getting created between Contacts and Accounts other than
    its original Contacts.
    Means already existing contacts are creating more relationships after
    download.
    But a unique feature is visible for all, All those with false
    contact-account relationships.
    Contact has field value for 'Address type' missing while the same address
    type field is properly added for correct relationships. ( please find attached the screenshot of the same)
    Any pointers in which direction we should proceed for the solution would be
    appreciated.
    Thanks in advance.
    Cheers,
    Sharad

    Dear Vimal,
    Sorry not sure then...
    Sometimes the RFC connection is refused and use to give that particular error messgae due to:
    The old RFC library having version 6.20 automatically converted the
    password into uppercase with a size limit of 8 characters before sending it to the SAP system.
    The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above. 
    So need to use upper case passwords when connecting to an SAP system having version less than 7.00. 
    But this is not valid in this scenario.
    Thanks,
    Atin

  • I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. So, what are the parameters that I need to set in CRM system so that my quotation gets replicated?

    Dear Experts,
    I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
    Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
    Thanks,
    SMTP

    It may be best to recreate the folder and the smart playlists from scratch.
    tt2

  • IDoc Issues when creating a Sales Order in CRM System

    Hi All,
    We have a BSP application in place which allows the customers to create orders online. This BSP application is linked to R/3. The R/3 BSP application remotely calls a custom code in the CRM system which creates an IDOC for the CRM Order and the IDOC is processed and a CRM Order gets created. In the BSP page we have given a provision to the client to enter a Requested Delivery Date which is mapped to the delivery date in CRM system.
    Now comes the problem. When the customer creates an order, he enters the requested delivery date but the order which is getting created is not being populated with the date entered in the screen but with the current date.
    But when I try and reprocess the IDOC through WE19 without changing any IDOC data records the order gets created with the date which was entered in the webpage.
    Any pointers regarding what is happening?
    Regards,
    Karthik

    Hi Karthik,
    Just check on the field date, this request delivery date in CRM.
    Does it come from date profile? If it does, then try to remove the
    date rule or any default value for this date.
    Alternatively, I am afraid you have to separately save the date
    after first IDOC document creation is done. Seems that the default
    value taken place (and replaced) after the document has created.
    Hope this helps.
    Gun.

  • Creating BADI for datasource enhancement in CRM system

    Hi,
    I am working on SAP BI/BW. This is the first time I am working in CRM system with CRM datasources. Facing some problem for datasource enhancement as never done it before in the CRM system. Is there anyone who can help in in creating BADI for datasource enhancement in CRM.
    Thanks in advance
    Moumita

    Hi Kushal,
    You can find the BADI name by,
    Go to Transaction SE24
    Enter the Object Type CL_EXITHANDLER and click on Display.
    Double Click on method "GET_INSTANCE".
    Put a Break-point on Call method cl_exithandler=>get_class_name_by_interface
    Run RSA3 transaction and execute the DataSource.
    The execution will stop at the break point.
    Check the values of variable 'exit_name', it will give you the BADI name called at that time.
    Thanks,
    Kokila

Maybe you are looking for