Hierarchy in Infospoke
Hello,
I want to create an infospoke with the values of the different hierarchy levels.
The hierarchy is extracted from datasource 0material_lprh_hier.
Do you know some alternative way to put the hierarchy in the infospoke?
Thank you in advance.
Regards,
Ana
InfoSpoke supports only Text and Atttributes of InfoObject to be extracted. The requirement can be met in 2 ways:
1) Built an Infospoke for the attributes and then read the hierachy in BADI through abap Code.
OR
2) Flaten the hiearchy by and program and store it into a transparent table. Load data from the table into an infoObject through generic datasource and then build hiearchy on top of this object.
hope this helps..
Similar Messages
-
Make a CSV using OPEN HUB including some nodes of a hierarchy
Hi People:
I have a requirement that needs to make a CSV using OPEN HUB DESTINATION in BI7. I'm taking the information of a virtual cube (SEM ). However, I have the detail in 0CS_ITEM. In this Infobject there are some nodes that have to be displayed in the file, but this nodes are the acumulated of some 0CS_ITEM.
My question is: Do I have to make an abap program to read de hierarchy and make manually the adittion of the acumulated and display it into the file? Is there any other way to get this target without making abap code?
Any clue will be great
Thanks in advancedHi
Instead of ABAP program I suggest you to create infospoke..and it will show a message in which format you want to save..
Hope this will work..
Kindly refer to the link given below..
[Info spoke|http://searchsap.techtarget.com/generic/0,295582,sid21_gci1224953,00.html]
Prasanna -
Hierarchy Extraction using Open hub Destination
Hi,
I need to extract hierarchy data for Application code(YAPPLCD) using OHD. In the Hierarchy there are 4 components(Industry, Market, Application Group and Application Code). i need to get all the 3 details for the Application Code(i.e to which Indusrty does it belong, Market and Application Group).But HIerarchy table is having one record for each apllication code, Market, Application Group, Application code.
How to get relevant data for the application code?
My file format should be:
Appl.Code | Appl.Group | Market | Industry.Hi Suma...
The SAP Open Hub service enables you to distribute data from an SAP BI/BW system into external data marts, analytical applications, and other applications. With this, you can ensure controlled distribution using several systems. The central object for the export of data is the InfoSpoke. Using this, you can define the object from which the data comes and into which target it is transferred, leveraging SQL Server Integration Services (SSIS) as the transfer/transform mechanism.
SAP BI objects such as InfoCubes, ODS objects, or InfoObjects can act as open hub data sources. You can select database tables or flat files as open hub destinations, and then use those destinations as actual sources within SSIS. To automate the extraction using SAPu2019s Open Hub Service, youu2019ll need to setup a process chain. Note that both a full and delta modes are also available as the extraction mode.
As stated already with direct extraction from SAP R/3, once data is extracted out of SAP NetWeaver® BI (SAP BW), the destination of that data could be any relational database (such as SQL Server), and then reports (from SSRS) and multi-dimensional cubes (from SSAS) can be created from that database data. The resulting SQL Server reports/cubes could then be used within the Microsoft Business Intelligence delivery mechanisms, such as through Excel, SharePoint, PerformancePoint, etc.
Hope this below link may helpful
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c08b1f70-6fb1-2b10-97a5-df4c503e03cb
Regards
Sudheer -
Where can I find a tutorial about Show Folders Hierarchy?
I have Permiere Elements 11 which also has the Elements Organizer as part of the program. And I have Photoshop Elements 10 also. The Elements Organizer with the video editing program is what I'm interested in though. I think my folder hierarchy is not right. I'd like to straighten it out but I don't know how. Can someone direct me to a tutorial on how to work with the Folders Hierarchy.
This might be a different question, but it might be related to my confusion about the Folder Hierarchy in the Organizer. On June 10 I was copying some photos from my hard drive to the Organizer - probably a dumb thing to do. While I was doing this, the Pictures folder (View and organizes digital pictures) no longer took me to all my photos on the hard drive. The Pictures folder is under Personal Folder, Documents, Music, Control Panel on the Windows 7 desktop to the right of the Start Menus stuff.
When I click on Pictures now I get two folders: Adobe and Pictures. The Adobe folder has these values - Size: 0 bytes; Contains: 0 Files, 1 Folder; Created: Monday, June 10, 2013; Attributes: Read-only (only applies to files in the folder. I deleted the Abobe folder several times but it keeps coming back.
What I would really like to do is to restore my Pictures folder to its original state so that I will have access to all my hard drive photos immediately instead of clicking around in those folders. I vaguely think that something I did to the folder hierarchy in the Optimizer has messed up other things on my computer.You wrote, "So if you moved the files, what you need to do is move them back..."
I don't know how to do this. Could you tell me how. I moved about 50 photos into the Organizer. Now I know I should not have done this. I'd like to correct the mistake.
When I click on the Show Folder List icon this is what I see:
My Pictures
Pictures
Faces
Clowns
My Videos
Computer
C:
Program Data
Users
Tommy
Faces
Dancing
Faces
Lovers
Racing
Tommy
Pictures
D
E
F
G
This makes no sense to me. But I could live with it - except perhaps something I did has made my PrE11 impossible to work with. When I put new clips via the memory card into the program, they do not go into the Timeline. All I get is an error message.
I like the Adobe programs and don't want to give up on them, especially since my problems probably have been self-imposed. -
Hiding a hierarchy column in graph view
Hi All,
In an compound layout I would like to have pivot view and bar chart view.
There are two hierarchy columns in criteria. These column should display in pivot view.
My requirement is to hide the hierarchy columns in Bar chart view and can we apply separate selection steps for each view.
Kindly help me..
Thanks,
HareeHi,
Edit the pivot table and graph and at the below you can see the selection steps for the individual components. So that you can give separately for each of the components.
Hope this helped/ answered.
Regards
MuRam -
When we are loading a hierarchy in the BW system, we get the following error :
Error in the hierarchy structure: see error log.
We tried activation of the hierarchy data source then rerun the load. Still it fails with the same error.
Please let us knwo if any one has inputs regarding the same.Please go through the following SAP Notes.
[Note 1266877 - BW hierarchy error when loading|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1266877]
[Note 384945 - BW: Incorrect hierarchy extraction for 0REOBJ|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=384945]
You will also find plent of threads with the same issue. Just search with the key words from the Error Log.
Regards,
Gaurav -
Error while assigning a foreign hierarchy characteristic
Hi Guys,
When trying to insert a characteristic node to a hierarchy, it gives me an error saying 'info object OHIER_NODE not entered for /SI/SS_O356(where the hierarchy is being maintained) as a foreign hierarchy characteristic' .Is there anything else that i need to maintain ?
Can someone please help me get out of this message
award will be provide for correct answer
ThanksHi,
Have you got the solution for your problem? .If so, may i know how did you solved it.
If not, please do not make thread as answered ,it misguide us that you got solution.
With rgds,
Anil Kumar Sharma .P -
Error while transporting infospoke with BADI in BW7.0
Hi:
We have an infospoke with Transformation ( ie with BADI) in BI7.0.
While transporting to Quality box it gives error.
"Transfer structure /BIC/CZZTXXXXX3 could not be generated
Error when activating InfoSpoke ZTXXXXX3.
Message no. RSOH010 "
Could you please help in rectifying the error.
PS: we tried transporting BADI first and then the infosoke but still its failing.
Regards!
SaniyaHi
Check the forum link below
Transport Problems with Spokes that have BADIs
Thanks -
Creation of new product hierarchy and products in SAP CRM.
Dear all,
please help with resolving of following issue:
In CRM system base hierarchies were replicated from R/3 system with materials. Current requirement is to create new materials in CRM directly (as standalone scenario). As far as I understand, I have to create new hierarchy with required list of set types in order to allow creation of products in CRM directly (product type = material). Can anybody describe changes in the system step by step, what should be changed and where?
As a result I need to have a possibility to create products in CRM directly for sales scenario processing.
Thank you in advance!Hi Jorge,
thank you so much for your reply!
Here what I tried to do:
1. I created new category in hierarchy R3PRODSTYP, added 3 set types: COMM_PR_MAT, COMM_PR_SHTEXT, COMM_PR_UNIT as basic set types.
2. In the SPRO - Cross-Application Components - SAP Product - Settings for Product Type - Number Assignment - Define Number Ranges for the Product Type "Material" I found my new product category is unassigned, so I assigned it to the "CRM Products" group.
3. Farther I tried to create a new product for created category in CRM Web UI, but was not able to find it in the Base category search field. All categories correctly displayed from R3PRODSTYP, but my new category is absent. What can be the reason of category absence? Btw, it cannot be found even when I try to display whole hierarchy in Web UI, however, in SAP GUI, it can be seen via tcode comm_hierarchy.
Here is the setup of hierarchies in the system:
I have no idea how to check #3 "Ensure the hierarchy is assigned to CRM application".
Can you please suggest, what should be changed in addition? Thank you! -
InfoSpoke fails with message "Could not open file on application server"
BW Experts,
I created an InfoSpoke that is configured to extract to a flat file. The name of the file is specified using a logical filename. During extraction, the infospoke reports the error message "Could not open file on application server" adnd marks the extraction process as red(failed). I have tried to run the InfoSpoke in background mode and in dialog mode and the same error appears. After i run in dialog mode, i checked SU53 for authorization errors and did not find any. I also tried changing the Logical filename setup in transaction FILE to a more "friendly" directory in which i'm sure i have authorizations (e.g. my UNIX home directory) and im still getting errors.
Can you please share your thoughts on this? Any help will greatly appreciated. I also promise to award points.Hi Nagesh,
Thanks for helping out.
If i configure the InfoSpoke to download to a file using "File Name" option and also check the "Application server" checkbox, the extract works correctly (extraction to the defualt SAP path and filename=infospoke name). If i configure the InfoSpoke to download to the local workstation, the InfoSpoke also works correctly. It's only when i configure it to download to the application server and use the "Logical filename" option, that i encounter a failed extract.
Here are the messages is the Open Hub Monitor:
(red icon) Request No.147515
0 Data Records
Runtime 1 sec.
(red icon)Run No. 1
0 Data Records
Runtime 1 sec.
Messages for Run
Extraction is running RSBO 305
Could not open file on application server RSBO 214
Request 147515 was terminated before extraction RSBO 326
Request 1475151: Error occured RSBO 322
If i clink on the error message, no messages nor clues are displayed. Note, this is a new InfoSpoke that is currently in the dev system.
Please help. -
InfoSpoke Flat File Extract to Logical Filename
I'm trying to extract data from an ODS to a flat file. So far, I've found that the InfoSpoke must write to the application server for large data volume. Also, in order for the InfoSpoke to transport properly, I must use logical filenames. I've attempted to implement the custom class and append structure as defined in the SAP document "How To... Extract Data with OPEN HUB to a Customer Defined Logical Filename". I'm getting an error when attempting to import the included transports (custom class code). It appears to be a syntax error. Has anyone encountered this, and, if so, how did you fix it?
Hello.
I'm getting a syntax error also. I did not import the transport, but applied the notes thru the appendix. When I modified the method "GET_OBJECT_REF_INT" in class CL_RSB_DEST as below, I get a syntax error on the "create object" statement.
when rsbo_c_desttype_int-file_applsrv.
*{ REPLACE &$&$&$&$ 1
*\ data: l_r_file_applsrv type ref to cl_rsb_file_applsrv.
data: l_r_file_applsrv type ref to zcl_rsb_file_logical.
*} REPLACE
create object l_r_file_applsrv
exporting i_dest = n_dest
i_objvers = i_objvers
Class CL_RSB_DEST,Method GET_OBJECT_REF_INT
The obligatory parameter "I_S_VDEST" had no value assigned to it. -
Infospoke - How to single Logical Filename for all infospokes
Hello all,
I want to only have one logical path and logical filename for all of my infospokes.
For example if I have infospokes ZAAA, ZBBB, ZCCC, I want to have only one common setting in the destination properties of TC:RSBO but three different distinguishable files on my OS.
I think with the standard settings, I have to make one logical file for every infospoke I have.
I am aware that I can put <DATE> or <TIME> etc in the logical file settings but that will not distinguish which infospoke the file came from.
I want my file to look more like <INFOSPOKE>_<DATE><TIME>.csv
I've already seen the document "How to Extract Data with OPEN HUB to a Logical Filename" and this is not it because I have BW3.5 and 3.5 already does what this article says.
Any help would be greatly appreciated.
Just in case, I am on BW3.5 SP17 on Windows/SQL.Jasprit,
Thanks for your input.
The functionality of the FM you said is similar to the InfoSpoke functionality...
Is it the same thing?
I wonder if I use this it means it is not part of the InfoSpoke license...
I will have our programer look at it and see what he thinks but in the mean time any other information is greatly appreciated. Especially if I can stick with using the standard InfoSpoke functionality...
Isn't this kind of functionality something that everyone wants?
I wonder why SAP didn't make it like this? -
Hi Bridge Geniuses!
I need your help. I am using Bridge to sort and keyword a pretty big photo archive. I have created a pretty long nested hierarchy (4 layers deep, max) and, for a few reasons, would like the parent tags to be automatically included when I indicate a sub-tag. The problem I have now is that the keyword list is distractingly long and organized alphabetically. My first question is this: is there a preference setting in Bridge that will ask the program to display the keywords in their hierarchy? That is, will Bridge present the list as, for example, cars à hybrids à Toyotas à Prius.
My second question is: if I have two or more names that represent the same keyword, is there an “aka” function in this program that will allow me to direct searches for two or more different words to the same keyword entry? (For example, if I want my searches for “Bruce Wayne” to also show entries marked as “Batman.”)
Finally, I would like to know if Bridge will perform keyword searches for more than one word at a time. So far, I have tried entering two keywords with overlap at a time, separated by a space or a comma or a semicolon, and the search comes up empty.
Thank you very much for your help!I reset my custom workspace and all seems to be well now. My keywords now show, the number of photos each applies to and I can again search.
Thank you. -
Error while uploading data from a flat file to the hierarchy
Hi guys,
after i upload data from a flat file to the hierarchy, i get a error message "Please select a valid info object" am loading data using PSA, having activated all external chars still get the problem..some help on this please..
regards
Srithere is o relation of infoobject name in flat file and infoobjet name at BW side.
please check with the object in the BW and their lengths and type of the object and check your flat file weather u have the same type there,
now check the sequence of the objects in the transfer rules and activate them.
there u go. -
Why I can not find field:Level in Project Hierarchy in BAPI_BUS2054_NEW?
Dear experts,
Why I can not find the field of "Level in Project Hierarchy" in structure BAPI_BUS2054_NEW?
I only define the data to upload wbs:
PROJECT DEFINITION
PROJECT DESCRIPTION
PROJECT PROFILE
WBS Element
WBS description
Can you tell me which fields must to upload?
Looking forward to your reply.
Many thanks.
MerryzhangAnyone can help me ?I need the field "Level" in BAPI_BUS2054_NEW,But I can not find it.
Maybe you are looking for
-
Hi Experts Please can you assist , we have a smartform that does not fax correctly. the smartform is created using standard process. The smartform is created correctly and can be seen in SOST. When we open it in SOST the document is fine. If we email
-
HT1296 syncing ipad min to itunes
My apps are sync but my music files cant sync to my new ipad min in itunes
-
How to see the ms files attachment in outlook in iphone
how to see the ms files attachment in outlook in iphone
-
Upgrade to virtualbox 4.1.4-1 now phpvirtualbox has stopped working
Hi Guys, As the topic describes, I have Upgraded to the community virtualbox 4.1.4-1 package (from community virtualbox 4.1.3) and now phpvirtualbox has stopped working. When trying to use phpvirtualbox in my web browser, I get the usual "Loading...
-
SAP Connectivity in Netweaver developer studio...
Hi everyone, I am trying to use the feature of "SAP connectivity" in the NDS. I created a proxy for a simple RFC. What I am trying to do is to call the RFC from a Java code. Here is what I wrote : try { Z_Rfc_Ws_Test2_Input input