Hierarchy In Report
Hi All
i am in a situation that we have 2 materials with a same name and different node names in a same node level
EX:
> LEVEL 1------: A Node Name 01
>LEVEL (2)-----: D Node Name 02
>LEVEL (3)----:G Node Name03
:I---Node Name06
:E--Node Name07
:E--Node Name08
Now if you see in Level 3 -> we have materials" E & E " with the same name but here node names are different "07 & 08",
Now i want to show the report with all the combination (or) else it will be a wrong report
So please some one tell me how to get the node names in report,(E-07 ; E-08)
answer me ASAP.
Sreenath
Hi,
there are two ways..
either you can keep the hierarchy expanded to level 7 and 8...
or you can create one DSO and write ABAP program to copy all the data from hierarchy to DSO so flat table instead of hierarchy..you can use this DSO for display of hierarchy nodes..
Thanks and regards
Kiran
Similar Messages
-
Roll up of the formula results as per hierarchy in report
Hi,
I am using a employee hierarchy in report with key figure as ROWCOUNT and formlas as Total liability amount
Currently the report is showing the number of employee under its manager correct like if there are 5 employees under a employee E1.
Suppose there are 2 employees wose total liability amount is 0
The report is showing 5 as under E1.
But now user doesn't want to show the employees whose Total liability amount is 0.
So i make a condition to show only employees whose total liability amount is 0 but the report is still showing the number of employees as 5 (ROWCOUNT) instead of 3 although the employees with non zero total liability amount is displayed in the report.
SO,please suggest me how to achieve this.
Its would be a great help to me.just need to properly maintain value categories..
-
How to display 3 level hierarchy alv report using SALV
Hi ,
I need to display a Hierarchy ALV report with 3 level.I thought of trying CL_SALV_HIERSEQ_TABLE but i am able to display only two level report.
How can i display the 3 - level heirarchy report using SALV. I don't want to use SALV_TREE.
Regards,
Aditya Tanguturi.Hi Aditya,
Please check this thread
Is it possible to display more than 2 levels us... | SCN
Thanks !
Amit -
Hi Friends,
I have created a Hierarchial ALV report using OOP concept (Class Builder). The output is OK but it is displaying the unwanted columns in the header part.
The code written is as follows.
=====================================================
REPORT ZMMSTKH.
DATA: G_ALV_TREE TYPE REF TO CL_GUI_ALV_TREE,
G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: GT_ZSD_BILLINFO TYPE ZSD_BILLINFO OCCURS 0, "Output-Table
OK_CODE LIKE SY-UCOMM,
SAVE_OK LIKE SY-UCOMM, "OK-Code
G_MAX TYPE I VALUE 255.
DATA CCONTAINER1.
DATA LS_FIELDCAT TYPE LVC_S_FCAT.
DATA GT_FIELDCAT_LVC TYPE LVC_S_FCAT OCCURS 0.
DATA IT_FIELDCATALOG TYPE LVC_S_FCAT OCCURS 0.
END-OF-SELECTION.
CALL SCREEN 100.
*& Module PBO OUTPUT
process before output
MODULE PBO OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAINTITLE'.
IF G_ALV_TREE IS INITIAL.
PERFORM INIT_TREE.
CALL METHOD CL_GUI_CFW=>FLUSH
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
CNTL_ERROR = 2.
IF SY-SUBRC NE 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
TITEL = 'Automation Queue failure'(801)
TXT1 = 'Internal error:'(802)
TXT2 = 'A method in the automation queue'(803)
TXT3 = 'caused a failure.'(804).
ENDIF.
ENDIF.
ENDMODULE. " PBO OUTPUT
*& Module PAI INPUT
process after input
MODULE PAI INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK.
WHEN 'EXIT' OR 'BACK' OR 'CANC'.
PERFORM EXIT_PROGRAM.
WHEN OTHERS.
CALL METHOD CL_GUI_CFW=>DISPATCH.
ENDCASE.
CALL METHOD CL_GUI_CFW=>FLUSH.
ENDMODULE. " PAI INPUT
*& Form init_tree
text
--> p1 text
<-- p2 text
FORM INIT_TREE.
DATA: L_TREE_CONTAINER_NAME(30) TYPE C.
L_TREE_CONTAINER_NAME = 'CCONTAINER1'(001).
CREATE OBJECT G_CUSTOM_CONTAINER
EXPORTING
CONTAINER_NAME = L_TREE_CONTAINER_NAME
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5.
IF SY-SUBRC <> 0.
MESSAGE X208(00) WITH 'ERROR'(100).
ENDIF.
CREATE OBJECT G_ALV_TREE
EXPORTING
PARENT = G_CUSTOM_CONTAINER
NODE_SELECTION_MODE = CL_GUI_COLUMN_TREE=>NODE_SEL_MODE_SINGLE
ITEM_SELECTION = 'X'
NO_HTML_HEADER = 'X'
NO_TOOLBAR = ''
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
ILLEGAL_NODE_SELECTION_MODE = 5
FAILED = 6
ILLEGAL_COLUMN_NAME = 7.
IF SY-SUBRC <> 0.
MESSAGE X208(00) WITH 'ERROR'. "#EC NOTEXT
ENDIF.
DATA L_HIERARCHY_HEADER TYPE TREEV_HHDR.
PERFORM BUILD_HIERARCHY_HEADER CHANGING L_HIERARCHY_HEADER.
PERFORM ZF_CREATE_FIELDCAT.
CALL METHOD G_ALV_TREE->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_STRUCTURE_NAME = 'zsd_billinfo'
IS_HIERARCHY_HEADER = L_HIERARCHY_HEADER
CHANGING
IT_OUTTAB = GT_ZSD_BILLINFO. "table must be empty !
IT_FIELDCATALOG = GT_FIELDCAT_LVC[].
PERFORM CREATE_HIERARCHY.
CALL METHOD G_ALV_TREE->FRONTEND_UPDATE.
ENDFORM. " init_tree
*& Form build_hierarchy_header
FORM BUILD_HIERARCHY_HEADER CHANGING
P_HIERARCHY_HEADER TYPE TREEV_HHDR.
P_HIERARCHY_HEADER-HEADING = 'Region / Material'(300).
p_hierarchy_header-tooltip = 'PO No'(400).
P_HIERARCHY_HEADER-WIDTH = 30.
P_HIERARCHY_HEADER-WIDTH_PIX = ' '.
ENDFORM. " build_hierarchy_header
*& Form exit_program
free object and leave program
FORM EXIT_PROGRAM.
CALL METHOD G_CUSTOM_CONTAINER->FREE.
LEAVE PROGRAM.
ENDFORM. " exit_program
*& Form create_hierarchy
text
--> p1 text
<-- p2 text
FORM CREATE_HIERARCHY.
DATA: LS_ZSD_BILLINFO TYPE ZSD_BILLINFO,
LT_ZSD_BILLINFO TYPE ZSD_BILLINFO OCCURS 0,
l_bukrs like zsd_billinfo-bukrs,
l_vbeln like zsd_billinfo-vbeln,
l_fkdat like zsd_billinfo-fkdat,
l_fkart like zsd_billinfo-fkart,
l_vkorg like zsd_billinfo-vkorg,
l_spart like zsd_billinfo-spart,
L_BZIRK LIKE ZSD_BILLINFO-BZIRK,
L_BZIRK_LAST LIKE ZSD_BILLINFO-BZIRK,
l_vkbur like zsd_billinfo-vkbur,
L_WERKS LIKE ZSD_BILLINFO-WERKS,
L_WERKS_LAST LIKE ZSD_BILLINFO-WERKS,
L_MATNR LIKE ZSD_BILLINFO-MATNR,
L_MATNR_LAST LIKE ZSD_BILLINFO-MATNR,
L_FKIMG LIKE ZSD_BILLINFO-FKIMG,
L_NETWR LIKE ZSD_BILLINFO-NETWR.
DATA: L_BUKRS_KEY TYPE LVC_NKEY,
L_BZIRK_KEY TYPE LVC_NKEY,
L_WERKS_KEY TYPE LVC_NKEY,
L_MATNR_KEY TYPE LVC_NKEY,
l_vbeln_key type lvc_nkey,
L_LAST_KEY TYPE LVC_NKEY.
SELECT BUKRS BZIRK WERKS MATNR FKIMG FROM ZSD_BILLINFO
INTO CORRESPONDING FIELDS OF
TABLE LT_ZSD_BILLINFO
WHERE SPART = 'CT' AND
FKART = 'ZVAT'.
select * from zsd_billinfo into table lt_zsd_billinfo
where spart = 'CT' and
fkart = 'ZVAT'.
SORT LT_ZSD_BILLINFO BY BZIRK WERKS MATNR.
LOOP AT LT_ZSD_BILLINFO INTO LS_ZSD_BILLINFO.
L_BZIRK = LS_ZSD_BILLINFO-BZIRK.
L_WERKS = LS_ZSD_BILLINFO-WERKS.
L_MATNR = LS_ZSD_BILLINFO-MATNR.
IF L_BZIRK <> L_BZIRK_LAST.
L_BZIRK_LAST = L_BZIRK.
PERFORM ADD_BZIRK USING L_BZIRK
CHANGING L_BZIRK_KEY.
CLEAR L_WERKS_LAST.
ENDIF.
IF L_WERKS <> L_WERKS_LAST.
L_WERKS_LAST = L_WERKS.
PERFORM ADD_WERKS_LINE USING LS_ZSD_BILLINFO
L_WERKS_KEY
CHANGING L_WERKS_KEY.
IF L_MATNR <> L_MATNR_LAST.
L_MATNR_LAST = L_MATNR.
PERFORM ADD_MATNR_LINE USING LS_ZSD_BILLINFO
L_MATNR_KEY
CHANGING L_MATNR_KEY.
ENDIF.
PERFORM ADD_COMPLETE_LINE USING LS_ZSD_BILLINFO
L_MATNR_KEY
CHANGING L_LAST_KEY.
ENDIF.
*if l_matnr <> l_matnr_last.
l_matnr_last = l_matnr.
perform add_matnr_line using ls_zsd_billinfo
l_matnr_key
changing l_matnr_key.
endif.
perform add_complete_line using ls_zsd_billinfo
l_matnr_key
changing l_last_key.
ENDLOOP.
ENDFORM. " create_hierarchy
*& Form add_month
*& Form add_ebeln
FORM ADD_BZIRK USING P_BZIRK TYPE C
P_RELAT_KEY TYPE LVC_NKEY
CHANGING P_NODE_KEY TYPE LVC_NKEY.
DATA: L_NODE_TEXT TYPE LVC_VALUE,
LS_ZSD_BILLINFO TYPE ZSD_BILLINFO,
L_BZIRK(12) TYPE C. "output string for month
CALL METHOD G_ALV_TREE->ADD_NODE
EXPORTING
I_RELAT_NODE_KEY = P_RELAT_KEY
I_RELATIONSHIP = CL_GUI_COLUMN_TREE=>RELAT_LAST_CHILD
I_NODE_TEXT = L_NODE_TEXT
IS_OUTTAB_LINE = LS_ZSD_BILLINFO
IMPORTING
E_NEW_NODE_KEY = P_NODE_KEY.
ENDFORM. " add_month
FORM ADD_WERKS_LINE USING PS_ZSD_BILLINFO TYPE ZSD_BILLINFO
P_RELAT_KEY TYPE LVC_NKEY
CHANGING P_NODE_KEY TYPE LVC_NKEY.
DATA: L_NODE_TEXT TYPE LVC_VALUE,
LS_ZSD_BILLINFO TYPE ZSD_BILLINFO.
L_NODE_TEXT = PS_ZSD_BILLINFO-WERKS.
CALL METHOD G_ALV_TREE->ADD_NODE
EXPORTING
I_RELAT_NODE_KEY = P_RELAT_KEY
I_RELATIONSHIP = CL_GUI_COLUMN_TREE=>RELAT_LAST_CHILD
I_NODE_TEXT = L_NODE_TEXT
IS_OUTTAB_LINE = LS_ZSD_BILLINFO
IMPORTING
E_NEW_NODE_KEY = P_NODE_KEY.
ENDFORM. " add_carrid_line
FORM ADD_MATNR_LINE USING PS_ZSD_BILLINFO TYPE ZSD_BILLINFO
P_RELAT_KEY TYPE LVC_NKEY
CHANGING P_NODE_KEY TYPE LVC_NKEY.
DATA: L_NODE_TEXT TYPE LVC_VALUE,
LS_ZSD_BILLINFO TYPE ZSD_BILLINFO.
L_NODE_TEXT = PS_ZSD_BILLINFO-MATNR.
CALL METHOD G_ALV_TREE->ADD_NODE
EXPORTING
I_RELAT_NODE_KEY = P_RELAT_KEY
I_RELATIONSHIP = CL_GUI_COLUMN_TREE=>RELAT_LAST_CHILD
I_NODE_TEXT = L_NODE_TEXT
IS_OUTTAB_LINE = LS_ZSD_BILLINFO
IMPORTING
E_NEW_NODE_KEY = P_NODE_KEY.
ENDFORM. " add_carrid_line
**& Form add_complete_line
FORM ADD_COMPLETE_LINE USING PS_ZSD_BILLINFO TYPE ZSD_BILLINFO
P_RELAT_KEY TYPE LVC_NKEY
CHANGING P_NODE_KEY TYPE LVC_NKEY.
DATA: L_NODE_TEXT TYPE LVC_VALUE.
WRITE PS_ZSD_BILLINFO-BZIRK TO L_NODE_TEXT.
CALL METHOD G_ALV_TREE->ADD_NODE
EXPORTING
I_RELAT_NODE_KEY = P_RELAT_KEY
I_RELATIONSHIP = CL_GUI_COLUMN_TREE=>RELAT_LAST_CHILD
IS_OUTTAB_LINE = PS_ZSD_BILLINFO
I_NODE_TEXT = L_NODE_TEXT
IMPORTING
E_NEW_NODE_KEY = P_NODE_KEY.
ENDFORM. " add_complete_line
*& Form zf_create_fieldcat
text
FORM ZF_CREATE_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'FKIMG'.
LS_FIELDCAT-REF_TABLE = 'zsd_billinfo'.
LS_FIELDCAT-NO_OUT = 'X'.
LS_FIELDCAT-KEY = ''.
APPEND LS_FIELDCAT TO GT_FIELDCAT_LVC.
ENDFORM. " ZF_CREATE_FIELDCAT
=================================================
Kindly look into the code and guide me the solution.
TIA.
Regards,
Mark Khi
good
i tried your ALV report but it is giving some error due to some ztable you have used in your progam,
you can go to se38 and give there BCALV* and press f4, you ll find lots of ALV example related to OOP concept, you can test them and use them as per your requirement.
thnaks
mrutyun^ -
what are the different product hierarchy wise reports available in standard sap
Hi,
Product hierarchy is for only reporting. in standrad system u can have 3 levels in product hierarchy .if u implement product hierarchy u can have reports like below.
reports that can give u the three (or modified ) levels. for ex; material group, material pricing group, additional material group. agriculture products,electricals and pumps respectively. u can have the reprots each level.
like this if u modify the system for more levels then standard 3 u can have more flexibility in reporting
regards,
sadanandam kasarla -
Multilevel hierarchy ALV report of Mother WBS
Hi ABAP Guru,
I have created a Mother WBS sturcture which has been created in CJ91 tcode. I need a same hierarchy alv report same structure as shown in cj91 t code. Please help me out.
I have created a alv reort on that but when I make change in mother WBS, the new added wbs is comming in my report at last. PLease help me out.Hi Manish,
I am able to see WBS Elements in MB51 Report after going to detailed list from the initial output page. In this detailed output the sender and receiver WBS Elements are getting displayed incorrectly.From that screen only,if I go to Material document list,sender and receiver WBS Elements are getting displayed correctly.
Regards,
B P Singh -
Need hierarchy alv report base on salv_demo_hierseq_simple
Hi friends,
i need to do a hierarchy alv report,
i copied example code from program salv_demo_hierseq_simple and changes the selection screen +changed the select from tables.
my problem is that the results is one big list of data,
i dont have to open and close lines.
is anyone can help me with what could the problem be?
thanks,
dana.Guys,
Any Idea on this. -
Urgent: hierarchy in report
Hi,
How can I exclude a account number with hierarchy active for it.
I have a report in which col1 is account hierarchy and col2 is amount. In the report I want to exclude one account form the report. I right click on account number, select the option select filter value.. , select that particular account. For the account being selected in the selection box the option exclude from selection is grayed out and so I cant select it. If I make hierarchy inactive in the report and then try it I can do exclude from selection. But now with this filter condition on if I make hierarchy active then it gives me following message:
Invalid filter on 0ACCOUNT: Filter changed
Message no. BRAIN502
Diagnosis
You tried to filter according to an invalid value.
This could be because you filtered according to a hierarchy node which
is not visible to the current user.
System response
The filter is not evaluated for the characteristic, but removed instead.
If no other filter values exist for this characteristic, the system
responds to the whole request with the message "no applicable data
found".
Thank you,
samTry placing account number in global filter and do the same (select the account and choose exclude).
Hope it works.
Regards -
Hierarchy relationship report - - Critical and urgent rek
Hello Everyone,
I have a critical problem. I have Unit in the row column displayed as hierarchy. Current and past year quantity as RKF in the column and share in relation to US as CKF in the column. US, northeast and southeast are all part of worldwide. When we rollup to worldwide the result should show up just US results in total and not add up all three. I tried many ways but its in vain. Is it possible to get the desired result?? Please any idea would be of great great help.
CURRENT REPORT RESULT
Unit--Current-PastShare in relation to US
Worldwide---10000-5000---200%
US--5000-2500---100%
NorthEast3000-1500---60%
SouthEast2000-1000---40%
DESIRED RESULT
Unit--Current-PastShare in relation to US
Worldwide----5000-2500---100%
US--5000-2500---100%
NorthEast3000-1500---60%
SouthEast2000-1000---40%Aneesh,
This is a display hierarchy created at the characteristic level but each with a different node. US has the states covered by each individual region and Worldwide has US and 2 other regions under it. Is there a way to write a condition stating the worldwide to take just US values and nothing below it.
Please experts let me know if there is a possibility and hopefully there should be a work around.
Thanks, -
G/L Account Hierarchy in BI not following the correct hierarchy in report
Dear Friends,
I tried using the queries 0FIGL_V11_Q0002 and also 0FIGL_V10_Q0010 in the both repot the Hierarchy is coming wrong for Example the element which has to come in second node is coming in last node. I have checked the hierarchy assignments in the BI system for the G/L Account.the Hierarchy was properly assigned but the same is not reflecting when i execute the report. Please tell me what might be the problem.
Thanks in advance
KarthikHi,
This is the hierarchy for the Financial statement version, The GL accounts are assigned in a hierarchy for finding out the profit/income and expenditure and loss. These GL accounts are assigned as per the requirement in the GL Account infobjects, but as i told if i execute the report the GL accounts are coming under different nodes irrespective of it is assigned. Let me know if i u want some more details.
Thanks
Karthik -
Hide certain nodes in a hierarchy in report
Hello all,
I am having a repport where in I am using a hierachy. There are totally 8 nodes under the root (parent) node. The requirement of the report is to show only two nodes out of it the 6th node and the 8th node.
Is it possible if yes can someone guide me how?
Thanks in advance,
K MHi,
You can restrict the hierarchy with these two nodes.
Right click on the characteristic>properties>select required hierarchy-->ok
again right click on char>restrict>here ylou can restrict the hierarchy with required node by moving them to right window.
regards
Message was edited by: Murali -
How to display an expanded hierarchy in report?
Hi,
i'm working with BI 7.0. How do I display a completly expanded Hierarchy in my report. At present I see the hierarchy but the nodes need to be manually expanded in the report.
pls help,
SDIn Query designer under properties of your characteristics there is a separate tab called "hierarchy"; only If hierarchy is active for your characteristic you can change the properties for the hierarchy. If not you will see a message like "no avalaible hierarchy for this characteristics".
If it is active it will be changeable. For autoopen your hierarchy you should select the point "expand till step" and define here till which step you want autoopen your hierarchy.
Regards
Engin -
Different chart for each level hierarchy in report designer
Is there a way to display a different chart for each level of the hierarchy in a report designer? I want a different chart for each level. That is, if there are 5 nodes in level 4, I want 5 different nodes. Is there a way to do this? I tried to insert the chart inside a cell in each level, but it shows the same chart for all nodes instead of a different chart for each node.
Has any one tried using a context sensitive chart? According to this, it seems like this should be possible, but I am having no luck.
http://help.sap.com/saphelp_nw70/helpdata/en/47/a99a0a5fdb0985e10000000a42189c/frameset.htm -
How to activate hierarchy in report?
Hi experts,
I want to create a report which will have Sales Office.. and my requirement is Sales Office Hierarchy shoud be active.. What are the steps to activate hierarchy in the report?
Thank you,
Swati.1. why it is necessary to activate the sales hierarchy.. i mean what is its use??
> hierarchy helps to view the data at various level. Say you have hierarchy for Plant. Then you can see data at each plant level or total at region level or at country level. Same can be with time - date or week or month or year.
2. Sort withing the hierarchy according to - sorting by Key or by text - name of plant or plant code.
3. Expand to level - at what level hier should be diplayed. if there are more levels, then at what level inital report output is required.
4. Position of Lower level nodes - nodes below / above its previous level.
5. Values of Posted nodes & Nodes with only lower level nodes - used to display or hide the data at each node level
regards: gaurave -
Warning for hierarchy in report
Hi,
when i execute a report with rsrt I get the following warning and no result at all...
To the InfoObject Balance/P&L-Position ist the Hierarchy "" not available
When I check the query in BEx Designer, I get the following error...
To the InfoObject Balance/P&L-Position ist the Hierarchy "TIAS_001" not available.
However the technical name of the hierarchy is only TIAS.
could someone pls help me out.
Thanks,
SDCheck you the Hier for this Infoobject is 'Active' ?
-
Missing hierarchy in Report-Report Interface
Hello friends,
I have a problem with hierarchies in RRI. The scenario is like this:
I have two reports based on the same Multiprovider, let's say report A and report B. Report A displays rows based on the Cost Center hierarchy and works fine. Report B displays rows based on Cost Element hierarchy and works fine too. The problem appears, when I am in report A and I jump (I go to) to the report B using RRI - data is not displayed in the hierarchy form anymore.
Your help will be appreciated.
KooyotHello
This problem became urgent.
Does anyone have an idea?
Report A - rows in hierarchy of Cost Centers
Repot B - rows in hierarchy of Cost Elements
Kooyot
Maybe you are looking for
-
SECess is not getting updated in RG1 register
Dear All, I have applied the Note 1034308 ( Budget 2007 - 08 changes for J1I5 ) but the sec cess entries are not getting populated in the RG1 register. which are the settings are required to be completed. kindly guide. Deepak
-
How do I use bin variable in package without asking a user?
hi, I would like to write an SQL but I want to use bind variable in package as a static without asking user? Like below? I would like to ask you, below there is a emp_id variable? Is this BIND variable? DECLARE bonus NUMBER(8,2); emp_id NUMBER(6) :=
-
BPM- scenario RFC - XI - receive file - - SOAP - return answer to RFC
Hello everybody, I have the scenario RFC call a BPM In the BPM, I have to receive information from a file ( generated by another system 4 times in a day) Mix the data of the file with the data of RFC Send them a SOAP send the reply to the RFC My prob
-
How to remove margin around #MainContent
I am starting a new site, you can see my start at www.lakesareacc.com/Home3.php. This is a DW template, 1 col. fixed width, header & footer. How do I remove the space that seems to surround the #mainContent section. I have looked and can't find any p
-
"Parse Error" when opening .WFT file
I have a .wft file left behind by a consultant; when I try to open it in WF Builder (2.6.3.5) I'm getting the following errors: 1300: Could not load. 1223: Parse error in line 45663. 1211: Invalid name for 'NAME' field of 'ROLE' entity. 204: Value mu