Hierarchy issue with Web Intelligence Report

Hi All,
We are facing an issue with OLAP Universe where we are using hierarchy for cost center in reports.
BEx query shows correct data in RSRT with hierarchy nodes.
We have built a Universe on top of this BEx Query.
We are using couple of nodes of cost enter hierarchy in WebI report but if we keep more than one node in WebI query, data comes double (probably because of duplicate rows). Instead if I keep just one of the node in WebI query, WebI report returns correct data.
Please suggest, why such behavior with OLAP universe and how to resolve this?
Best Regards,
Ashish

Thanks for your suggestions.
I am little confused on how to check SQL generated for OLAP WebI Query.
But other reports on same universe behave same way and I'll give a try to another universe but I don't expect it to behave in different way. I saw a setting for relational Universes like restriction on duplicate rows but the same is not present in case of OLAP Universe.
Do you know how WebI behaves with BEx hierarchies?
There has to be some setting to make it work...
Best Regards,
Ashish

Similar Messages

  • What's happaned with Web intelligence report Server

    Hello
    Im making a document about the BOE XI 3.1 server and when i saw the services in cmc web app i dont the services:
    Web intelligence report Server
    Web intelligence Job Server
    Dont this services exist anymore?
    Thanks
    Vegas

    I believe they are called adaptive processing/job servers now, from the CMC services there should be a sub category for webi, the new names are listed under there.
    Regards,
    Tim

  • Strange issue with WEBI schedule Report

    Hi All,
    I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
    Any idea???
    regards

    Hi Manoj,
    1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very    large data.
    2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
    Hope this will help,
    Anamika.

  • Number formatting issue in Web intelligence report

    Folks ,
    I've an object called ' Serial number' (12 digits long) but when I set this in query filter as a prompt number format gets changed.
    Similar like this:  
    whereas I am expecting to see 123456789123 something like this.
    I made sure that object data type is number while designing universe as well as also format the object ( using format object option) and set as ############. ( 12times #) to forced as 12 digits number.
    When I drag this object in 'result objects' results shows fine but if i add this as 'Query Filters' number gets changed as above pic.
    Any advise ?
    Cheers,
    iTanzir

    Hai Itanzir
    Try to create a dimension variable in universe and choose the data type as string. Please check this and let me know for issues, if any.
    Regards,
    Amala.S

  • BLOB data in Web Intelligence report

    Hello,
    I am doing research, how to display documents which are
    stored in BLOB field in a database.
    I would like to create list of the document names with Web Intelligence
    report and make a link to document. Link to the document should open the
    document, the document can have different MIME types (doc, pdf, jpg,
    tiff, ....).
    Could you please help me to find right solution for this?
    Thanks in advance.
    Best Regards,
    Slavisa

    hi,
    Please refer to below link.
    BO XI 3.1 and BLOB
    Regards,
    Vamsee

  • Problem with a Bex Query Report with Web Intelligence

    Hello!
    I have a Bex query (with query Bex version 7.0) I'm connecting with Web Intelligence (4.0) but one of the attributes instead of displaying the description shows only the key, and it is strange because other cubes if given by the conversion.
    I wonder if there is a solution for this or if it is a problem of version 4.0 of Web Intelligence.
    I await your response,
    Greetings!

    Hi,
    Whereabouts in the application are you seing this problem?  (in the query panel conditions, in the prompt list of values, or in the table block? )
    also, what do you mean by "and it is strange because other cubes if given by the conversion" ?
    it's worth noting that the "key and text display properties" in the Bex Query Designer do not influence webi.  WebI consumes the global infoobject property from BW RSH1.
    Regards,
    H
    p.s. if you need to understand which features are or are not supported with BI 4.0 tools, please look here: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d056e1bc-2794-2e10-959e-8779c5623cc5

  • Bad performance in web intelligence reports

    Hi,
    We use Business Objects with Web Intelligence documents and Crystal Reports.
    We are supporting bad performance when we use the reports specilly when we need to change the drill options
    Can someone telling me if exists some best practices to improve performance? What features should i look to?
                      Best Regards
                            João Fernandes

    Hi,
    Thank you for your interest. I know that this a issue with many variables because that i need information about anything that could cause bad performance.
    For bad performance i mean the time that we take running and refreshing reports data.
    We have reports with many lines but the performance is bad even when a few users are in the system
                                 Best Regards
                                         João Fernandes

  • Creating iView based on Web Intelligence Report

    Hi,
    I have BO 3.1X on a dedicated Server with Web Intelligence on it, where I created my repot.
    I want to "consume" this report as an iView via a Portal that is installed on a different Server.
    The PIK is already installed on the Portal, but I believe that I am missing somthing since it is not working, and the whole configuration process is not clear to me.
    Can someone tell me how to ensure that my system is defeind correctly? what is the correct way to create Portal System for BO?
    How to create an iView for it? using what tempalte? "Crystal Enterprise Report" or "Crystal Enterprise Report"?
    Thanks,
    Doron

    Hi Doron,
    I am also getting same issue. After deploying com.businessobjects.pct.masteriview.par we failed to get that u201CBusinessObjects Integration Kit -iView templateu201D.   Do you have any idea on this?
    For time being with that par file created an portal component iview and testing on that. Once we see the report we are getting the following error.
    HTTP Status 404 - /sap/2.0/reportView.do
    type Status report
    message /sap/2.0/reportView.do
    description The requested resource (/sap/2.0/reportView.do) is not available.
    Apache Tomcat/5.5.20
    Is this because of faild to deploy com.businessobjects.pct.masteriview.par file? Or else any thing we are missing out?
    And here is the complete URL (try right click and Properties on the window):
    http://Domain:8080/sap/reportView.do?iDocID=<XXXX>&id=<XXXX>&sap_sysid=BI&sap_client=<XXX>
    Regards
    Venkat

  • BI Launch Pad - Error opening Web Intelligence Report (Error: INF)

    Hi:
    We're working with 4.1 Support Pack 3 Patch 1
    Version: 14.1.3.1300
    We migrated a Webi report from development environment to testing and it was working fine.
    After making some minor changes on the Web Intelligence report, we migrated again, but now when we open the Web Intelligence report we get the following error:
    Faltal Exception occured. The cause was:  com.businessobjects.corba.generic.container.proxy.internal.DependencyFailoverCallbackImpl$FailoverFatalException:
    Prepare failover failed (Error: INF)
    Any ideas?
    Thanks in advance!
    Kind regards,
    Florencia

    Hi Florencia,
    It seems like report is corrupted some how.
    To check report is existing in filestore or not , go to report in Launchpad->Properties->check File name , there should be frs path assigned to it.If not it is corrupted.
    Ex : File Name:frs://Input/a_067/064/004/278595/auytslwhrgrdneqcvzbefs0-guid[atli.nsurgzit4q8pfgonmi].wid
    If it corrupted , check in myfavourites : ~webintelligence folder , there you can find last auto saved instance.If not we may need to create new report.

  • Gauges/Dials in BO 4.0 Web Intelligence Reports

    Hi All,
    We are currently working on BO 4.0 and want to add Gauge in web intelligence report. As we know that, Gauge is not existing in the list of components provided by BO webI so we need to do some work around or even for the single value display which other component we can use in WebI.
    Can anyone suggest how we can achieve the same?
    Regards,
    Tina Ailani
    Edited by: Ailani Tina on Aug 25, 2011 6:18 AM

    Personally, I'd do something like this:
    Open Microsoft PowerPoint, use the drawing tools to create a thing that looks like a dial (with a needle).
    Copy and paste it 8 times.
    Move the needle on each so that's it in a different position.
    Right click the shapes and click "Save as Image".
    In Webi, add a blank cell where you want the picture to be.
    Click the alerters icon in the toolbar.
    Add some rule, for your measure (whatever should drive the needle of the chart).
    Click the format button, and on this page, select an image for that sub-alerter.
    I think 8 is the limit. You can always apply to alerters (each with 8 sub-alerters) to the same cell.

  • Scheduling Error For Web Intelligence Reports

    Dear Experts,
        I want schedule BO XI R3.1 SP 3  Web Intelligence reports.
        For this i want to give  Adaptive job server :destination details.
        Can you suggest what i need to enter for below details?
       1)Host    ?
       2)Port?
       3)Domain Name?
       For Host can i give BO CMC name or can i give BO Server IP Address or suggest me right one?
       For Port can i give CCM -->Adaptive job server PID value or CMS Port or SIA Port or Suggest me right one?
       For Domain name what i need to enter?
       The errors i am getting as shown below while scheduling with different ways as i mentioned above..
      Error Message:     server error. []: [CrystalEnterprise.Smtp]
      Remote Instance in Federated Cluster:     No
       Error Message:     server error. [Error initializing SMTP server. Return code: [TCP send failed.]. Reason:                               [Port address].]  [CrystalEnterprise.Smtp]
    Reply will be appreciated
    Regards,
    Venkat.

    Thanks a lot Konovolav,
    Can you tell how can i find SMPT server details to fill host, port and domain name for email scheduling?
    I can able to connect to Internet in my BO server.
    Can you tell me the path to find above details?

  • WIH 00013 time out error while viewing a BO Web intelligence report

    Hi,
    I have a BO web intelligence report. While viewing the report i get WIH 00013 time out error. I have another report with everything same as this one except for one filter condition. That is working fine but former is giving me an error.
    I tried changing the timeout values to 120 minutes from 90 minutes in connection server setting but didn't work.
    Also when i run the same report by scheduling it in CMC and format as PDF, then it works fine. This error only comes when i try to view the report directly from infoview.
    Please let me know if there is any other way to resolve.
    Thanks!
    Edited by: Satya Suma on Mar 9, 2011 1:31 PM
    Edited by: Satya Suma on Mar 9, 2011 2:00 PM

    Hi Suma,
    These links may be helpful to you:
    WIH00013 - Invalid Session
    WIH 00013: Invalid session
    All the Best,
    Madhu....

  • Web Intelligence Report Server - Error: Failed to run rexec. Error number

    Hello,
    I post a message in this forum :
    "When i want to start "Web Intelligence Report Server" with CMC, i've got this error :
    Web Intelligence Report Server: Echec du démarrage/de l'arrêt du service sur l'ordinateur distant : Error: Failed to run rexec. Error number: %12.
    Any idea ?"
    I've do this command :
    bouser@v-bo-1 bobje$ ./ccm.sh -restart ras
    bouser@v-bo-1 bobje$
    but i have always the same error "Error: Failed to run rexec. Error number: %12".
    Thanks

    Please try to avoid posting duplicate forum posts.
    This command :
    bouser@v-bo-1 bobje$ ./ccm.sh -restart ras
    Restarts RAS server and has nothing to so with WebIntelligence.
    To be able to Start/Stop servers from CMC, you have to have rexec running on your Unix box.
    Google rexec for more information on what it does and ask your Unix admin to enable it.

  • How to add image in web intelligence report?

    Hi All,
    I tried to add an image into web intelligence report by using the background image function available in the appearance settings. But when I tried to click on the button with ellipse, it does not show up a dialog box.
    Do I miss out anything? Help is really needed.
    Thanks
    David Yee

    Hi David,
    You can try these steps to see if the Background image dialog box is appearing for a Free Standing Cell.
    1. In Webi Java Report Panel, select Templates-> Free Standing Cells -> Formula and Text Cells-> Blank Cell
    2. Click and drag the cell in the report.
    3. Select the cell Properties
    4. Under Text Format, click on the button in the Background Image property.
    5. You can select the u201CImage from URLu201D or u201CImage from fileu201D.
    6. If you are selecting u201CImage from URLu201D, change the u201CRead cell content asu201D property to u201CImage URLu201D under Display section in the Properties Window.
    Hope this helps.

  • Freeze header row panes in cross tab WEB Intelligence report

    how do i freeze the crosstab header row in the WEB INTELLIGENCE report so that the header remains stationary /freezes at the top and the data can be independently scrolled.(similar to freeze panes in MS Excel).
    please provide me with a Quick Solution since i am stuck on this task for quiet some time.

    Hi,
    Prepare to be stuck no longer!
    Sorry, this functionality is not available in webi..
    This suggestion has been made multiple times in the Ideas Place : https://cw.sdn.sap.com/cw/community/ideas/businessanalytics/sbowebi
    for example: https://cw.sdn.sap.com/cw/ideas/1664
    please Vote it up.  actually, i see it is in status "under review" so that is positive. No commitments to timeline for inclusion, so don't hold your breath!
    Regards,
    H

Maybe you are looking for