Hierarchy leaves have different InfoObject name than the value

Hi,
I am working on an hierarchy and loaded data to BW. I noticed that when I expanded the tree, the right side of the leaves saids 0COSTCENTER but the left hand side of the leaves has the department values. Would this be a prolem for reporting or any purposes for use of hierarchies? I was told that the 0COSTCENTER should display the InfoObject name ZDEPT instead.
Thanks
Will

Hi Voodi,
Actually I was wondering if you could give me some insights on this. We are working with a 2 level hierarchy. That is
Costcenter1
   -Dept 1
   -Dept 2
   -Dept 3
Cost center2
   -Dept 4
   -Dept 5
   -Dept 6
Etc...
We would want a manager from cost center 1 to only look at data from those departments from cost center 1 and not any other cost centers. We are building this hierarchy to check the authorizations.
Would recommend doing this even though I think we could do this with attributes and navigationsal attributes instead of hierarchy because it is only 2 levels.
Is there a way to do authorizations using navigational attributes?
Any other ideas?
Thanks,
Will
Message was edited by:
        Will Ferrell

Similar Messages

  • HT204053 I have multiple people in my family that use Itunes under my account. Is it possible for them to have different user names? The reason why I am asking is when I go to FaceTime my daughter's iPhone it also rings to my husbands iPhone.

    When I used facetime on my Macbookair for the first time I facetimed my daughter's iphone and it also rang to my husbands iphone. How do I keep that from happening? We all use the same itunes account so does it have something to do with that? do we each our own apple ID? and is it possible to do that?

    Create an AppleID under different email addresses for each family member at http://appleid.apple.com
    If they don't already have their own email address just setup a free one with Gmail, Yahoo, Hotmail or whoever you prefer.
    Then on each device sign into iMessage with the users own AppleID in:
    Settings > Messages > Send & Receive > Tap AppleID at top > Sign Out, then sign back in again with the correct AppleID.

  • How can i recover application that i have purchased in a different app store than the one i am using now ?

    I Have purchased some apps from a different app store than the one i am using currently. Is it possible to recover them as i am not finding them in my list of purchases. Thx

    If I create a new iTunes account for the German itunes store, what happened with my previous purchases? Do they remain on my iPhone and my Mac's iTunes?
    Nothing will happen to your existing purchases. Your computer will remain authorized - you can authorize a single computer to up to five iTunes Store accounts - and the apps and content will remain in place.
    Can I switch from one acount to the other every time I want to update an application or purchase a new one?
    As long as you're in the relevant country, yes. Again, the terms of use say that you agree not to even attempt to use an iTunes Store from outside of its country.
    Regards.

  • When importing a CD, the CD Lookup Results dialogue box came up and I choose the wrong CD title.  Now iTunes is importing a different song list than the one on my CD.  How can I retrieve the CD Lookup Results to choose the correct title?

    When importing a CD, the "CD Lookup Results" dialogue box came up and I choose the wrong CD title.  Now iTunes is wanting to import a different song list than the one on my CD.  I've shut down my computer and opened iTunes from the hard drive Program Files and tried to import the CD again with the same problem.  How can I retrieve the "CD Looup Results" diaglogue box to choose the correct CD title to fit the song list on my original CD?

    You might also be able to do it without importing the songs again I think. Just highlight the tracks, right click them and choose "Get Track Names". This feature only works on CDs that were imported via iTunes.

  • Slideshow with Faces.  Any way to have faces put names on the slideshow?

    I'm creating a slide show using hundreds of slides. Is there a way, other than editing the description manually for each slide, to have Faces assign names of the people in the picture that will show in the slideshow.

    Hi there,
    So this works great for creating filenames, but the title aspect only half works for me. As per instructions in help I added the titles after a pipe symbol to the markers, so it looks like this: 1001|Creating a Something Or Other. Some of these were created as per the marker, but most were not. I use the same format for all of them as shown in my example. When I Update All or Generate the chm (in Robohelp 8, TCS, BTW) it looks like Robohelp is beginning to create them as per the markers as shown in the topic list, then it stops and replaces most of them with the filename. So I get the filename as the title of the page, which is of course no use to me or to users during a search in the help. As I said, some work, but most do not.
    Any ideas what's happening here?
    Thanks

  • HT201622 How do I install apps on a new iPhone 6 that uses a different Apple ID than the one used to purchase the apps?

    How do I install apps on a new iPhone 6 that uses a different Apple ID than the one used to purchase the apps?

    Sign in to the iPhone or connect the phone to the computer and sign into the store using the original ID and download the apps to the phone?

  • My iPad has a different Apple ID than the Apple ID on my computer. The iPad Apple ID has an email address that I no longer use. If I try to add the email address that I now use (and which is my Apple ID on the computer), it won't allow me to add it.

    My iPad has a different Apple ID than the Apple ID on my computer. The iPad Apple ID has an email address that I no longer use. If (while on the iPad) I go to My Apple ID and try to change or add the email address that I now use (and which already is my Apple ID on the computer), it won't allow me to add it. It says : "Email address is already verified for another Apple ID"  I haven't really been aware of this as a problem until I tried (for the first time) to sync my iPad to the computer and became aware that certain things wouldn't transfer. What is the solution to this?

    What are you having problems with ?
    This post was about having updated the primary email address on an iTunes account via a computer - if you do that you might need to log out of the account on an iPad by tapping on the id in Settings > iTunes & App Store and then log back in with the updated version of the account for that email address change to be recognised on your iPad. If you don't log out and back in then an iPad (or iPhone or iPod Touch) might continue to show the old version of the iTunes account id.

  • I subscribed to iTunes Match and would like to sync my music on multiples devices that have different Apple IDs within the same iCloud family.

    I subscribed to iTunes Match and would like to sync my music on multiples devices that have different Apple IDs within the same iCloud family.
    Can someone indicate the way to proceed?
    Thanks.

    Hi,
    You can't use family sharing or multiple Apple IDs with iTunes match.
    ITunes match is only attached to Apple id that you used to subscribe.
    Jim

  • Can two people have different itunes accounts on the same computer ?, can two people have different itunes accounts on the same computer ?

    Can two people with two ipod touches have different itunes accounts on the same computer ??

    Yes but you they have to setup 2 different user accounts on the same computer.

  • Do you need to use an email as an apple ID?    We have a family email which is currently the apple ID so I can keep track of purchases but i have 2 iPhones and 2 itouches. Can all 4 devices have different apple ID under the same email address. Also for th

    Do you need to use an email as an apple ID?    We have a family email which is currently the apple ID so I can keep track of purchases but i have 2 iPhones and 2 itouches. Can all 4 devices have different apple ID under the same email address. Also I wanted to know because for the game center we wanted to keep track of each individual not just o e account.  DID I MAKE SENSE

    Figured it out. Thanks.

  • I need to purchase an app using a different credit card than the one on my account how do I do it

    I need to purchase an app using a different credit card than the one on my account how do I do it?

    Hello Dylanshopes,
    It sounds like you would like to use different payment info than what is currently associated with your account. This article will help you change that information named:
    iTunes Store: Changing your payment information
    http://support.apple.com/kb/ht1918
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Ordered an iPhone 6 Plus off contract with a credit card that has a different billing address than the account.  Does it matter and is the order going to be cancelled if it doesn't process the card correctly?

    Just don't want to find out Wednesday that my order was cancelled or delayed because the credit card has a different billing address than the account.  If they check the validity of the card at the time you pre-order I don't see it being a problem.

    Oh, should mention I ordered right at 3AM (EST) on the 12th and got a Confirmation email with a Deliver by: 9/19/14 but when you try the "Check Status page" it spits out "Expected Ship Date: Not available at this time."

  • Use a different SSO Server than the one specified during install.

    Hello,
    I found on documentation that OAS Portal Configuration Guide would tell me how to use a different SSO Server than the one specified during install. I need to tell an existing Portal installation to use a new Identity Management infrastructure server I installed.
    However, documentation does not mention anything related to that. It states that ptlconfig would do the trick, but ptlconfig instructions are not clear on how to accomplish this.
    Could anyone that has done this before, help me out? Thanks in advance...

    Hello jlubbers,
    That is exactly what I am talking about, the ptlconfig does not model SSO components. So I assume it is incorrectly referenced on several points of documentation as a tool to work with SSO parameters or configuration.
    I need to know how to tell my Portal to look at the new SSO server. If someone has done it before, please let me know.
    Thanks again.

  • Is it possible to have Different Interval Ranges for the same Doc Type

    Dear All,
    Here is the issue.Is it possible to have different interval ranges for the same document type according to certain condition.Like my client , wants his interval ranges  be divided according to region(which are many)
    Regards,
    Sameer Jalees

    Hello,
    As you know we can only assign one number range for External and one number range group for internal in the sales document type.
    If you want different number ranges based on the regions, then as Jignesh suggested, you need to go for an enhancement.
    Use the exit USEREXIT_NUMBER_RANGE in program MVA45AFZZ, include a Z table with region as a critera and number range group for different numbers based on the regions. Talk to the business and get more details, get the help of ABAP team for technical details.
    Regards,
    SAM

  • My account asks me to change my password every week for no reason and i have different security questions for the same account

    My account asks me to change my password every week for no reason and i have different security questions for the same account

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Try changing the security on the router. Start with no securty as a test.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Content Tracker Reports Query file modification issue - Custom Report

    Hi All, I was trying to generate a custom report using Content Tracker. I was successful in doing so. However, I found that sometimes it does not pick up the updated query file of Content Tracker reports. I made a change in my query: from SELECT * FR

  • Why isn't my jsf app internationalizing?

    Hello all - Using NB 6.5.1, JDK 6, Java EE 5, and Glassfish V3, so nothing but the good stuff. This should be simple for anyone who is already internationalizing their apps, so please assist. New to i18n but badly needing to grasp it, I have develope

  • Specific extractor works in DEV but not in QUAL

    Hello Everybody I have new problem : I created a specific extractor ZCRM_SRV_PROCESS_I based on specific FM based on RSAX_BIW_GET_DATA_SIMPLE. This extractor have to retrieve specific fields of Service Order Item (linked document type BUS2000116) In

  • Mac Mini & The Simpsons DVD Boxsets.

    Today, I tried to watch a DVD of The Simpsons on my Mac Mini. However, when I insert the DVD, the drive spins for about 30 seconds, and then just ejects the disc without mounting the DVD or trying to load DVD player at all. I cannot find any mention

  • Connection Between Oracle 9.2.0.6 (Solaris 10) and SyBase (AIX)

    Hi every one, I need to connect with a trigger (to check if a data value is in Sybase) between a Oracle DB and a SyBase, can some one HELP ME PLEASE!!