Hierarchy level Mapping

Dear Gurus,
I am doing Idoc to file scenario where i have to send Merchandise Category idoc .
To store one total hierarchy of Merchandise information
the data is stored in 4 levels, if SAP is sending two hierachys
information so eight segments will be created in source idoc.
I am able to pick all the data properly , my problem is
when i map E1WPW01 segment to my target strucuture
i am getting 8 rows.. instead of two records..
Can anyone tell me how to achive this mapping.Any context mapping to achieve this..?
category id
parentsubcategoryid
subcategory id
parentid
E1WPW01 --- Warenger
        E1WPW02---Description
E1WPW01 --- Warenger
        E1WPW02---Description
E1WPW01 --- Warenger
        E1WPW02---Description
E1WPW01 --- Warenger
        E1WPW02---Description
Regards,
Vijay

Hi,
Are you using any conditions like taking two fields from two different segments levels and mapping it to the target while mapping these source and targets
If yes means then use the Context Change option in Mapping
http://help.sap.com/saphelp_nw04s/helpdata/en/bd/ca1105c81c6742a0f8c8d49f8834bf/frameset.htm
If Mapping Fails for a Certain Message Type
http://help.sap.com/saphelp_nw04s/helpdata/en/29/e0194120ddf223e10000000a155106/frameset.htm
Regards
Seshagiri

Similar Messages

856 ASN Hierarchy level Mapping

HI Friends,
I need one help regarding ASN Mapping...
I want to map the below structure from IDOC to 856 ASN Map.
The Idoc Hierarchy Structure is
- Shipment ( repeats 1 time)
- Order ( repeats multiple time)
- Tare (Pallet) ( repeats multiple time)
- Pack (Case) ( repeats multiple time)
- Item ( repeats multiple time)
The EDI Hierarchy Structure is
G_HL ( 1 to many time - as group)
-HL ( 1 time)
I want to map (represent )the each Hierarchy level of Idoc hierarchy structure in the EDI HL segement.
How can i achive it...
Any help will be greatly appreciated....
Regards
Venkatesh

Hi Ravi, Ramu and Venkat,
I cant duplicate the G_HL segment.As because each level is dependent on above level.
like example
If input contains this data
Shipment SHP1
Orders ORD1
Tare TARE1
Pack PCK1
Item ITEM1
Item ITEM2
Pack PCK12
Item ITEM11
Item ITEM12
Orders ORD2
Tare TARE21
Pack PCK21
Item ITEM21
Item ITEM22
Tare TARE22
Pack PCK22
Item ITEM23
Item ITEM24
I want output to be generated like this
Note below REF segment is just reference..HL contains many segments...
HL1S
REF*SHP1
HL2O
REF*ORD1
HL3T
REF*TARE1
HL4P
REF*PCK1
HL5I
REF*ITEM1
HL6I
REF*ITEM2
HL7P
REF*PCK12
HL8I
REF*ITEM11
HL9I
REF*ITEM12
HL10O
REF*ORD2
HL11T
REF*TARE21
HL12P
REF*PCK21
HL13I
REF*ITEM21
HL14I
REF*ITEM22
HL15T
REF*TARE22
HL16P
REF*PCK22
HL17I
REF*ITEM23
HL18I
REF*ITEM24
If i duplicate the HL levels then i wont get the output in the above seqenece...I will get all Orders, Tare ,Packs and Items one by one...It wont work...
Regards
Venkatesh

Error in content level mapping

Hi Gurus,
I designed star schema in that when as a standard practice (for making report performance faster) . I searched threads in forum and everything as defined i have done still I am getting errors.
1) I am setting content level agg. of fact for their based dimension then I am getting error in consistency check as
'[39008] Logical dimension table Dim_xyz has a source Dim_xyz that does not join to any fact source.'
, what i should do more for this ?
2) If i define content level mapping in dimensions for its same column like date for time dimension then i get error message as
'[nQSError: 14031] The content filter of a source for logical table: Dim_xyz references multiple dimensions.'
3) Also as we know fact table contains only measures and foreign keys of dimensions so why do i get error in consistency check as '[89001] The Physical Table '"Fact_xyz"' has no keys defined.'
I am fed of these stupid errors as why does not obi server understand that this is fact table. When I saw prebuilt rpd i did not find these types of error there.
Thanks for your instant reply,
Amol

Hi,
The scenario I am trying to test is a multi mapping scenario where I am trying to split one source message and create two target messages by using two different receiver interfaces, one for each message.
I am on PI 7.1 and when I test message mapping and operation mapping using the payload from SXMB_MONI, it is successful. Whereas when I test the scenario end to end I am getting the following error messages:
Operation Mapping
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Name
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Namespace
http://accenture.com/1:N_multi-mapping
Runtime error
Split mapping created no messages
Start tag ns0:Messages Add raw attribute xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge" Start tag ns0:Message1 Close tag ns0:Message1 Start tag ns0:Message2 Close tag ns0:Message2 Close tag ns0:Messages
Could someone please help
Cheers,
S

Limitation on Hierarchy levels

Hi,
I want to find out what is the limitation on number of Hierarchy levels (Custom Hierarchies) that can be created in BO Universe?
And is this limitation oriented with the DB we connect?
As I am using Netezza DB so I want to know the number of hierarchy levels that I can create for objects in Netezza DB?

We have a BEx query, having 9 product Hierarchy levels. When we are creating Universe, there is no issue. But when we do integrity check, getting a lot of parse errors and could not make the universe to work.
Is there any limitation on number of herarchies to be supported from BEx query to Universe? Any OSS notes / Lessons learnt will be much appreciated. Please help urgently. Thanks.

Table relationship between hierarchy level and merchandise category

1) Want to find Merchadise Category from Merchandise Hierarchy level which is attached with same Merchandise category.
I am having data/TABLE as below.
my input: M_WWG1C_class
i want to fetch data matkl in T023 or matkl in MARA for the same article within same merchandise category.
How i can have link?
2) i am having input CAWN_atwrt(Characteristic Value) and how i can reach matkl in T023 or matkl in MARA for the same article within same merchandise category.

Oracle does not support REPEATABLE READ transaction isolation level. It only supports SERIALIZABLE, READ COMMITED and READ ONLY isolation levels.
The default is READ COMMITED.
While the READ COMMITED can access all the committed data till the point of execution in transaction, READ SERIALIZABLE can access committed data till the point of start of transaction.
Another difference between two with respect to ROW LEVEL LOCKING is
Both read committed and serializable transactions use row-level locking, and both will wait if they try to change a row updated by an uncommitted concurrent transaction. The second transaction that tries to update a given row waits for the other transaction to commit or roll back and release its lock. If that other transaction rolls back, the waiting transaction, regardless of its isolation mode, can proceed to change the previously locked row as if the other transaction had not existed.
However, if the other blocking transaction commits and releases its locks, a read committed transaction proceeds with its intended update. A serializable transaction, however, fails with the error "Cannot serialize access", because the other transaction has committed a change that was made since the serializable transaction began.
Read following for clearing your concepts on transaction isolation levels and locking mechanisms
http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/server.920/a96524/c21cnsis.htm#2414
Chandar

Drill in BW hierarchy level in webi based on input control selection

Hello Experts,
I have a requirement in Webi. The Webi report is based on BW hierarchy and it is using hierarhcy both in the report output block and also in the report prompts. We are are BI 4.0 SP5,Patch 6. The report has input controls in it based on the BW Hierarchy. When the report is first executed,the user can drill down the hierarchy by clicking on the "+" nodes to the max level as shown in the screenshot below.
Now, when the user selects an input control, the data gets filtered but the hierarchy level automatically expands. In other words, when they select a data hierarchy showed in the input control the hierarchy in table is shown expanded and they want to see the hierarchy in the table close automatically.
So ideally its like this when a value from input control is selected.
Whereas the user wants it to be like this automatically on selecting a particular value from the input control and not in expanded form.
I'm aware of the Hierarchy depth function but that only takes us to a particular node based on depth and then doesn't allow further drilling after that.
Is there any setting in webi/bex about always keeping all sub nodes closed to prevent this expansion on selection of input control?
Thanks and regards,
Abhishek

Just did some research on on this and the SAP best practice: The question itself is logically incorrect.
A report/table filter where there is a hierarchy may remove rows without respecting the hierarchy structure. For this reason, a filter can remove a parent node currently expanded and keep leaves or
nodes collapsed. To avoid returning an empty table in this case the system automatically expands the hierarchy in the block to shows the resulting members
Thats why it automoatically expands the hierarchy.
Closing this thread. Thanks.

Hierarchy Level in report

Hi GURUS,
I have a requirement in report i.e. I need to display the Hierarchy level from the 4th level only, I do not want to see the first 3 levels, where do I do the settings for that in reporting.
I was told that there can be some settings done in Hierarchy tab of that info object in report level in Values of Posted Nodes. But even that option is disabled. If this is the way I need to do it then how to enable that option or if there is a different option then would appreciate if you explain me in detail. Thanks in advance.

Hi ganesh,
for this same as normal procedure.. but in BEX analyser.. in the query designer window properties.. I mean select ur hierarchy and right click and > select Ristrict-> and there you can select particular level of nodes only...
so, there you can select all fourth level nodes..and drag and drop it into right side window... and save it.. and execute the query..
so, now you can get only Fourth level nodes only in the reporting level...
i think this will helpfull to u..if it's ok ... Reward me points..
Thanks
@jay

Main item and Hierarchy level items in SAP EWM

We use ERP SAP AFS and EWM 9.1
ERP sales order 20000 - 5PCS ( Different grid values chosen and delivery is distrubuted to EWM)
Outbound delivery order contains main item and corresponding SKU displayed with Grid values like Color, Cup and Size. (Hierarchy Level)
20000
20000-0001A30
20000-0001A32
20000-0001C34
20000-0001B36
20000-0001D38
We create Warehouse tasks for SKU items ( Items 60,70,80,90,100) for picking.
I need to process VAS activites for this.
Price labeling and putting on plastic bag for all SKU's ( 2 VAS activity).
I have maintained packaging specification and tried to process it.
But here I get an error in VAS order. Because WR Qty from ODO to VAS order is not copied. It is getting deleted at the time of VAS order creation.
Then I tried to maintain the packaging specification for item 20000 (main item) and process the VAS order. Here VAS order got created and WR Qty also displayed.
But Picking Warehouse tasks are created for SKU items not for main items. In this case I am not able to process it also.
Packaging specification for main item or SKU item I should consider? If it is for SKU , need to have lot of master data. Is there any link i can make maintaining packspec for main item and process the warehouse tasks for SKU.
Which way i have to go now?
Any suggestion please
Please ask me if you need more inputs

Hi Jobi,
I agree to Juergen, you'll need individual pack specs per subitem in order to process VAS on this level. Did you think of using batches and depending characteristics for the grid values? This is how EWM for Fashion works. Then you could define only VAS pack spec for multiple grid values.
Best regards,
Christian
Remark: did you consider EWM for Fashion for your implementation?

Multi level mapping in PI. eg: A = B= C w/o BPM

Hi All,
I want to do multi level mapping withou BPM i.e Structure A to structure B mapping and Structure B to Structure C i.e
A=>B=> C. Let me know proc in PI 7.0/7.1 without BPM. Is this possible through Interface mapping or Interface determination ?
Thanks,
Jogula Ramesh

Hi Ramesh,
Finally you want Strcuture C as the out from PI System,?? if Yes then develop two mappings(A>B,B>C)and add it in Interface mapping,we can add any number of mappings in Interface mappings.
The source message to Interface mapping is A and receiver would be C.
This is will work.
Regards,
Raj

How to only display specific members from dissimilar hierarchy levels?

Hi,
I have a Business Partner that routinely wants to build a report that displays members from dissimilar hierarchy levels. For example, she wants to display member "210_UNASSIGNED EXP/ACC" from level 8 and member "E090_ADVISOR SERVICES" from level 1. When she filters on just those two members, the reports displays as such:
She then must manually expand the "E020_CORPORATE AND EXECUTIVE" member 7 times to see "210_UNASSIGNED EXP/ACC":
Is there anyway to make her life easier and have the report display only the "210_UNASSIGNED EXP/ACC" member and the "E090_ADVISOR SERVICES" member, even though they are from different levels?
Thanks,
Michael J Titera
BI4.0 SP8.3
SQL Server 2012

Hello Michael
Displaying information from mixed hierarchy levels without the context of the parent members is a reporting workflow best suited to WebI and CR. The AOLAP content can be exported as an Analysis View and then this becomes a data source for WebI and CR.
Our previous product Voyager used to allow member selection from mixed levels without the context of parent members but it caused a lot of confusion and misinterpretation of the data, which is why we deliberately do not have it in AOLAP.
Worth noting that BI4.1 was a big release for AOLAP with many enhancements. One is "Expand to Level". So instead of having to click 7 times to expand the hierarchy, it now just requires one mouse right-click to do the same thing.
Regards
Ian

Material Group Hierarchy Level 1 - Description

Hi,
We required Material Group Hierarchy Level 1(0RPA_WGH1) DESCRIPTION. we find data source 0MATL_GRP_1_TEXT to
get description. that standard data source created based on table TVM1T. We did find any data in that table. kindly guide me
how to acheive this.
Thanks

hi rajendra,
just check table T023T, hope this will help u.
thanks

Regd:hierarchy level query

hi friends,
i have a one employee table.
empid mangid.
1 0
2 1
3 2
i wanted display hierarchy level of the employee like..
wanna display uppper & lower mangid of employee.
if suppose i pass empid=2
then it should display hierarchy like...
managerid
0
3
because empid=2 parent of empid=3 and Chiledid of mangid=0.

Hi,
For this you have to use Connect by clause and Start with Class ,
Using This we can get Hirarical Data.]
SELECT empno,
ename,
job,
mgr,
hiredate
FROM emp
START WITH mgr IS NULL
CONNECT BY PRIOR empno = mgr
try like this
Thanks,
Sanjeev.

Identify hierarchy level

hi experts
i need to know in my report the hierarchy level on which user is currently on, like if he selects year/quarter/or month....
how can i achieve this please help
thanks and regards

Hi Kart
thanks for your reply.... i have tried it but i am getting dim_level column blank ....
see the steps which i have followed:-
1) i have created three views on top of my times view( which is being created using my main time dimension ), i have created join on d_year of my d_date_year_level to times_view.d_year, d_quarter to d_date_quarter_level, d_monthno to d_date_monthno_level
2) after creating join in my physical layer with times_view... then i dragged all my three views to my fact table in BMM layer and removed all columns except dim_level.... in fact table source i created one inner join with time_view... in content tab i set the aggregation level to ltimes_view detail logical level.
when i created report using year, dim_level, sales dim_level column is coming blank.
could you please help me if i have missed any step or done something wrong..
regards

Allocations at customer Hierarchy level

Hi Gurus,
I have a requirement from client to allocate stock of restricted products at customer hierarchy level. For example: Material ABC is a restricted product and there are 500 CV available in the plant, Client would like to allocate 100 CV to customer-1, 200 CV to customer-2 and 200 CV to customer-3.
Also Material ABC can be allocated to one of the nodes of customer hierarchy and automatically this stock should be available to all the customers with in that hierarchy to consume. If there is a chain customer like SAMS, stock is assigned to highest node of SAMS at state level and this stock should be available for all SAMS clubs with in the state to consume.
I am using Quotations to reserve stock at customer level. The problem is with allocating stock at customer hierarchy level. Please suggest me some solutions to achieve this requirement.
Thank You in advance,
Samatha.
Edited by: Samatha on Oct 11, 2011 10:04 PM

Hi,
That particular product and customer groups combination cvcs delete. It means that the particular combination of cvcs deleted. so there is no chance to see the forecast.
regards,
sivaram2411
Edited by: sivaram2411 on Apr 19, 2011 9:03 AM

Profit Center Hierarchy Level in ABAP-HR

I am working on an ABAP-HR report related to Organisation management.
There is a requirement wherein I need to retrieve data from a Profit Center Hierarchy Level .Can u please advice me on this.
Thanks in advance,
Raja.

Hi ,
(i_name is the entered profit center group name)
Get the internal name of the entered profit center hierarchy.
CALL FUNCTION 'G_SET_LIST_SELECT'
       EXPORTING
            SETCLASS      = '0106'
            SHORTNAME     = I_NAME
            KOKRS         = 'MIT '
            KTOPL         = 'HEUS'
       TABLES
            MATCHING_SETS = T_SETLIST.
IF T_SETLIST[] IS INITIAL.
    MESSAGE E002(SY) WITH 'Profit Center group does not exist'.
    EXIT.
ELSE.
    READ TABLE T_SETLIST INDEX 1.
ENDIF.
Get the entered profit center hierarchy info.
CALL FUNCTION 'G_SET_TREE_IMPORT'
       EXPORTING
            SETID                     = T_SETLIST-SETNAME
       TABLES
            SET_HIERARCHY             = T_SETHIER
            SET_VALUES                = T_SETVALUES
       EXCEPTIONS
            SET_NOT_FOUND             = 1
            ILLEGAL_FIELD_REPLACEMENT = 2
            ILLEGAL_TABLE_REPLACEMENT = 3
            OTHERS                    = 4.
IF SY-SUBRC <> 0.
    MESSAGE E002(SY) WITH 'Profit Center group does not exist'.
    EXIT.
ENDIF.
or try one of these
FC_PRCTR_HIERARCHY
TXW_EXTRACT_CO_PCTR_HIERARCHY
Regards,
pankaj singh.
Message edited by pankaj singh

Hierarchy level Mapping

Similar Messages

Maybe you are looking for