HIERARCHY load from R/3 does not complete

Hi there gurus,
I am trying to load the 0GL_ACCOUNT hierarchy master data, but it never finishes. The attributes and text loaded successfully. We have already successfully installed the BC on R/3, then replicated it in BW, then installed the BC in BW. The master data loads fine into the PSA, but from the PSA, it just sits in yellow status and then finally times out.
Any ideas please?
Thx
Charl

Hi Charl,
Can u just check the hierarchy for 0GL_ACCOUNT characteristic and compare it with R/3 hierarchy . If both are identical then you can manually turn it to green status.
Regards,
Prakash B

Similar Messages

I have ipad air 32 wifi, I have some problems in opening websites by safari, the loading of a websites does not complete. And also it is a little slower in facebook app as compared to ipad 4 and iphone 5s. Can u help me please I was very disappointed

I have ipad air wifi, I have problems in connection, in safari most of websites won't load it only a white page appears with message safari cannot load ....
The websites like apple.com, yahoo.com, facebook.com, comed.uobaghdad.edu.iq, ....
Also if I open facebook app it's slower in loading posted images than the new ipad ( ipad4) and iphone 5s.
I was disappointed because of safari problems can you please help me ??

You may have to close all apps in the multi-task window
1.Double-click the Home button.
2. Swipe the app's preview up to close it.

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Problem during hierarchy load from ECC 6.0 to BW

Hello,
I encountered a problem during hierarchy loads from ECC to BW:
I get the following in BW:
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
Once I go into ERP and look at the IDocs I get the following message:
Idoc Error 26:
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment E1RSSH does not occur at the current level of the basic type (extension ).
This error can have several reasons:
The segment E1RSSH is assigned to a group whose header segment does not occur.
The segment E1RSSH does not exist in the syntax description of the basic type (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type (extension ).
Can anyone help?

The most basic setting in a BW system is its connectivity with the R/3 system (which is a basis team activity, but BI consultant can always help).
Issue: While creating source system, I am getting an error "Segment E1RSSH does not exist".
Diagnosis
Segment E1RSSH is in the syntax description, but it does not exist.
The issue was that some of the entries in the table EDISEGMENT were missing.
As this a standard table, it is recommended to restore the table from Backup or from another BI system. (Please ask your basis team to do it.)
Now, the significance of the segments: We all know that we require 3 message types in total to communicate with R/3 system. RSRQST, RSSEND and RSINFO.
Now each of the message types has some segments which help in communication.
You can see this segment types in the t-code we30. Just enter the basic idoc type and click on display.
This error is not a common error, but can be useful if at any stage of implementation or support, the table gets disturbed and you have issues with source system connectivity.
Thanks
SM

I switched on my PC and there was an update for realplayer. Since then firefox will not load. It is running according to Task Manager. I've downloaded a another copy of the programme using IE but whilst it loaded as a programme, does not open a window.

I switched on my PC and there was an update for realplayer. Since then firefox will not open as a window. It is running according to Task Manager. I've downloaded a another copy of the programme using IE but whilst it loaded as a programme, does not open a window.

Hi again,
Helps if I give the correct link ! <br/>The press shift button appears to still work, but the option to start in safe mode from the programs listing of a standard install I do not think exists anymore.
Safe mode will start from a command line, (or a shortcut) and in some circumstances you may need to enter the full path name on a command or shortcut detailed instructions are at http://kb.mozillazine.org/Safe_mode
Remember (at least at this stage) do not make changes when you get the options list, just click on the continue button.
If you think that RealPlayer is causing the problem you could uninstall that for now.
Firefox recent versions are 3.6 4.0 (and 5.0 in beta). There is some debate as to whether creating new profiles or re-installing Firefox is the simplest method of troubleshooting and solving some of these problems, personally I use multiple profiles and multiple versions of Firefox, and tend to forget the required procedures are less than straightforward. For now at least try [[safe mode]] again.
* see also Instructions for [[installing a previous version of firefox]]

[bumblebee] Failed to load module "nouveau" (module does not exist, 0)

Hello my friends,
bumblebee does not work for me. I installed bumblebee, nvidia, nvidia-utils, mesa-libgl, bbswitch-dkms ...
# lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation 3rd Gen Core Processor Thermal Subsystem (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 7 Series/C210 Series Chipset Family Thermal Management Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24)
nVidia 620M at PCIBus 01.00.0
First, nvidia is disabled by bbswitch.
# cat /proc/acpi/bbswitch
0000:01:00.0 OFF
Then I execute the command
# optirun -vv glxspheres
[ 505.314018] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 505.315297] [DEBUG]optirun version 3.2.1 starting...
[ 505.315938] [DEBUG]Active configuration:
[ 505.316203] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 505.316421] [DEBUG] X display: :8
[ 505.316552] [DEBUG] LD_LIBRARY_PATH:
[ 505.316674] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 505.316788] [DEBUG] Accel/display bridge: auto
[ 505.316900] [DEBUG] VGL Compression: proxy
[ 505.317014] [DEBUG] VGLrun extra options:
[ 505.317126] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 505.317295] [DEBUG]Using auto-detected bridge virtualgl
[ 506.597122] [INFO]Response: No - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597316] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597448] [DEBUG]Socket closed.
[ 506.597538] [ERROR]Aborting because fallback start is disabled.
[ 506.597654] [DEBUG]Killing all remaining processes.
Now, the nvidia is enabled.
# cat /proc/acpi/bbswitch
0000:01:00.0 ON
# modprobe nvidia
modprobe: FATAL: Module nvidia not found.
/etc/bumblebee/bumblebee.config
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
What is wrong? Thanks so much for help!

Just did a downgrade and it's working again, here are my versions.
linux 3.9.9-1
linux-headers 3.9.9-1
nvidia 319.32-2
nvidia-utils 319.32-1
bbswitch 0.7-4
If you have conflicts, I found it easiest to remove those (bbswitch, virtualbox in my case), downgrade linux and then install the appropriate bbs/vb packages

After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
     a. iTunes
     b. QuickTime
     c. Apple Software Update
     d. Apple Mobile Devices Support
     e. Bonjour
     f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC

HT1222 Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

Restore as New (no backup)... then Re-Sync your Content.
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

AFX 2014.1.1 does not completly close

When I try to close AFX, it is still showing 2 instances of AFX and quicktime still open in Task Manager. I have to manualy close them to be able to reopen AFX. This sometimes happens with Premiere also. The programs will not reopen until I either do this or reboot.

This happens every time I use AFX and once in awhile with Premiere. Mike Daniels
From: Szalam <[email protected]>
To: mike daniels <[email protected]>
Sent: Monday, November 17, 2014 9:44 AM
Subject: AFX 2014.1.1 does not completly close
AFX 2014.1.1 does not completly close
created by Szalam in After Effects - View the full discussionDoes this problem happen frequently? If so, how frequently?How many times in a day do you launch and close After Effects? What about Premiere Pro?I have had this issue happen, but very, very rarely. It may be a Windows issue because I'm also on Windows 7 and it's happened with non-Adobe software too (C4D). If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6937459#6937459 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6937459#6937459 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in After Effects by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Does not complete processing of "Home" of the Creative Cloud desktop application

Someone know the way to fix the following issue?
After installed some Creative Cloud Software, I had uninstalled Adobe application manager manually and installed Creative Cloud desktop application manually. because automatic upgrade of creative cloud desktop application from adobe application manager does not work.
The creative cloud desktop application setup had been completed successfully. but, seems that it does not complete processing of displaying the history if I chose "Home". The progress Icon will stay in continuity. And any contents does not show on it.
Regards,

I'm posting this in a few threads to try to catch everyone having the problem.
The good news is that I found a way to fix this.
The bad news is that it involves uninstalling everything. (Note that reinstalling over the old installs won't cover it, I'd tried that one once too. You'll have to fully uninstall each program before redownloading/reinstalling.)
I spent many hours with tech support yesterday running through options unsuccessfully, and can very thoroughly assure you that uninstalling the desktop app, renaming any number of folders, and new user accounts all will not help you. From doing a lot of research on various similar problems, it appears that it's possible for this to spontaneously resolve within a couple of hours. If it doesn't, though, you're stuck with fixing it yourself.
The best theory I found was that it's caused by updating or installing a program without doing it through CC. If you've downloaded an installer and run that or clicked "Check for updates" in the help menu inside one of the other apps, this is you. Other people have noted that if you know which app you did this with, you can uninstall that one to fix it. If you have no idea, the simplest path is to just uninstall everything. You can try doing things one at a time, but you'll need to reboot every time the uninstaller tell you to do so and then see if it's fixed. (Personally, I got sick of that by the second time through.) I do remember clicking "Check for updates" right around the time this started for me, but I don't know which program it was in, just that I knew it would trigger the updates I knew existed but CC wasn't acknowledging.
I will also note that once I had everything uninstalled, I ran the Cleaner Tool and did a "Clean All". If you're going to or need to do that, make sure you've backed up all of your preferences, customizations, plugins, and so forth as needed.

I tried to update my nephew iphone 4 version 4.3.4 (8k2), I did back-up everything before attempting to update and the result when I click down-load and update, it does not update instead it says, itunes could not contact the iphone software update etc.

Hi to all,
I tried to update my nephew iphone 4 version 4.3.4 (8k2), I did back-up everything before attempting to update and the result when I click down-load and update, it does not update instead it says, itunes could not contact the iphone software update server because you are not connected to the internet. I did check my wire-less connections and the connection from my PC to wire-less is hundred percent okay. I did search using google.com to confirm and my connections is good. Is there any problem regardings my firewalls or any help will be appreciated. Thanks

Hi bosefire,
Thanks for visiting Apple Support Communities.
You can use the steps in this article to troubleshoot your iTunes connection:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Regards,
Jeremy

Premiere Pro 1.5 does not complete DVD burn

I have Premiere Pro 1.5 installed on a laptop running Vista Business. It is a Sony VGN-Z laptop with the following specs:
Operating System
                        MS Windows Vista Business 64-bit SP2
CPU
                        Intel Mobile Core 2 Duo P9700 @ 2.80GHz
                        Penryn 45nm Technology
RAM
                        4.0GB Dual-Channel DDR3 @ 531MHz (7-7-7-20)
Motherboard
                        Sony Corporation VAIO (N/A)
Graphics
                        Nvidia Defaul @ 1600x900
                        256MB GeForce 9300M GS (Sony)   47 °C
Hard Drives
                        313GB Hitachi Hitachi HTS723232L9SA60 (IDE)
                        Ricoh Memory Stick Disk Device (IDE)
                        Ricoh SD/MMC Disk Device (IDE)
Optical Drives
                        MATSHITA BD-MLT UJ232AS
Audio
                        Realtek High Definition Audio
I always turn off all other applications including virus software, disconnect from the internet, and set the laptop power to max performance which does not let the laptop go to sleep and so on.
So far I have only used it to create DVDs from clips uploaded from Mini DV tape recorded on a Sony HC-96 camcorder. The only problem I have encountered is that the burn to disc does not complete. There are no errors or other messages when this happens. The burned disc will play on the Sony laptop in media player, but not play on any other PC or DVD player.
If I then make a “copy” of the disc to a blank DVD+R disc, the copy of the DVD plays fine on other PCs and DVD players. It seems that the original disc created does not close properly.
Does anyone have any suggestions how to solve this?

First, some reading
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus a Microsoft note http://support.microsoft.com/kb/314060
And another note http://support.microsoft.com/kb/982116
Second, tell PPro to create an ISO on your hard drive, use the FREE http://www.imgburn.com/ http://www.imgburn.com/index.php?act=download to write to disc... at the slowest speed possible

Windows 7 Defrag from command line does not work

We are running Windows 7 in a virtualized environment. When running windows defrag using schedule or from command line, it does not work. The command that I am executing as administrator is
C:\Windows\system32>defrag /c
Microsoft Disk Defragmenter
Copyright (c) 2007 Microsoft Corp.
It displays the above message and exits back to the command prompt. However if I run the command defrag C: it does work. Defragmenting from the GUI works as well as long as both the disks (C: and System Reserved) are selected and when I click on
Defragment disks, works fine.
I am concerned about defrag running from the task scheduler with the command "defrag /c" (auto scheduled using Configure Schedule... from Disk Defragmenter) does not work and the system never gets defragmented automatically.
This happens only with some of the windows 7 VM's that we have.
There are no entries in Event Log that point to the defrag (using task scheduler). Any ideas what may be going on?

Hi,
Could you defrag as below method:
1. Open Disk Defragmenter by clicking the Start button. In the search box, type
Disk Defragmenter, and then, in the list of results, click
Disk Defragmenter.
2.Under Current status, select the disk you want to defragment.
3.To determine if the disk needs to be defragmented or not, click Analyze disk. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Once Windows is finished analyzing the disk, you can check the percentage of fragmentation on the disk in the
Last Run column. If the number is above 10%, you should defragment the disk.
4.Click Defragment disk. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
For more information, please read this article:
Ways to improve your computer's performance
http://windows.microsoft.com/en-in/windows/improve-performance-defragmenting-hard-disk#1TC=windows-7
Meanwhile, read this article:
Defrag from the Command-Line for More Complete
Control
http://technet.microsoft.com/en-us/magazine/ff458356.aspx
Karen Hu
TechNet Community Support

When I click email link on BT home page it does not complete I am on W 7 and it works on IE

Only recently the link to 'email' from the BT home page does not complete. I am on Windows 7. The link completes in Internet Explorer.

Hi Brightonian,
Please check the application preferences to see if this is a stored preference. [[Set how Firefox handles different types of files]]

Shared printer from a pc does not show up on my printer list.

I have a macbook air and the shared printer from a pc does not show up on my printer list. I know it's available on the network as I have a another pc that has access to it. The Mac did find it at one time but it has since disappeared. Appreciate help.
Rich

Can you see the CD ripped songs in iTunes itself? Can you then right-click and select "Show in Windows Explorer"?

HIERARCHY load from R/3 does not complete

Similar Messages

Maybe you are looking for