Hierarchy maintain and load

hi ,
i am new to SAP -Bi , Can any one explain me how to maintain Hierarchy and load data into it .i have sandbox system for practice.
Thanks
Ganesh.

Hi
Search the forum, there are lot of threads related to this.
Regarding Hierarchies
Regards,
Srinivas

Similar Messages

Hierarchy creation and loading

Hi all,
I am new to BW and trying to learn Hierarchies.
for example i have created
ZREGION
ZZONE1,ZZONE2,ZZONE3
ZAREA1
So i want all these infoobjects to be under an order like zregion will be having zzone1, zzone2, zzone3 and again these will have zzarea1 under zzone1
so i have created all these infoobjects in BW then how to get them in the order i have mentioned above.
and also when doing reporting can i just drag characterstic ZRegion into the rows and all the structure should be displayed.
plz letme know how to create the heirarchy.
and also i have a doubt of loading them.
thanks
Prasad

Hi Aby,
i have went into change mode of my infoobject zregions
and in that i have selected with hierarchies
so do i first need to add my other infoobjects in the external heirarchies and then go to the maintain heirarchies tab and make changes...like when i get into the maintain hierarchies tab without adding the external hierarchies i am not able to insert any characterstics, after inserting the infoobjects in the external hierarchies then only i could use the push button insert characterstic as a node....
what is the difference of external hierarchies and this maintain heirarchies.
thanks
Prasad
Message was edited by: Prasad M

Lead Time - Customizatiou0131n steps: Shipping point, route, and loading group

It says about delivery scheduling that "The lead time considers the shipping point, route, and loading group". Can anybody explain me briefly the customization menu steps about this sentence?
Thanks in advance.

Please go through this document it will help you
1) Maintain transportation planning point through Menu as follows:
IMG Maintain Logistic Execution  Definition Enterprise Structure  transportation planning point.
Create your own like BP01 enter the general data¡¯s required
2) Defining modes of transport:
IMG RoutesBasic Transportation Functions  Transportation Logistic Execution Define modes of transportDefine routes
Use the standard like:
Shipping type: 01
Description: Road
3) Define shipping types :
Basic Transportation Transportation Logistic ExecutionIMG Define shipping types Route Functions
Or through T-code: SM30
PT: 01
Description: Truck
Mdtr: 01
STPG: 0001
4) Define transportation connecting point :
LogisticIMG DefineRoutes  Basic Transportation Functions  Transportation Execution Define transportation connection pointsroutes
Copy the std point and make it FB01 as departure zone and FB02 as destination zone
5) Define routes and stages.
 Logistic Execution IMG Define Define routes Routes  Basic Transportation Functions Transportation routes and stages
Use the standard route and copy it as FB0001 and enter the departure zone and destination as what we created.
6) Defining Transportation Zone:
Basic Transportation Logistic Execution IMG Define transportation Router determination  Route Transportation Functions zones
Use the standard transportation zone depending on the route so as for the example use 0000000003 - Southern Region
7) Maintain country or transportation zone for shipping points
 Logistic Execution IMG  Route determination  Route  Basic Transportation Functions Transportation Maintain country and transportation zone for shipping point
Shipping point be ASH1 and route as 0000000003 which is assigned to country India
8) Maintain route determination:
Logistic ExecutionIMG Route determination Route  Basic Transportation Functions  Transportation  Maintain route determination
Country of departure: India
Departure Zone: 0000000003
Country of destination: India
Destination Zone: 0000000003
And enter the datas needed like shipping condition 01, etc.
Maintain Transportation relevance for shipping point, sales document type and delivery types.
9) Now create shipping types
IMG Define shipment Shipments  Transportation Logistic Execution types
Copy the standard 0001 and make it to AFIL
10) Define and assign traffic zones through T-Code: T_76 (or) thru menu as follows
IMG Define Basic functions  Shipments cost  Transportation Logistic Execution and assign tariff zones
Copy the standard and make it to FABTARIFF and assign our transportation planning point as ATP1, ATP2 assign tariff zone to every particular transportation planning point
11) Define and assign pricing procedures
Shipments Transportation  Logistic Execution IMG define and assign pricing Price control  Pricing cost procedures
Copy the standard shipping cost pricing procedure SDFC00 to FBSC01
12) Assign purchasing data:
 Logistic Execution IMG Assign purchasing data Settlement  Shipments cost Transportation
13) Assign transportation planning point to shipping condition, purchase organization, purchasing group and to plants.
14) Define Automatic G/L account determination:
 Transportation  Logistics Execution IMG Automatic G/L Account Determination Settlement Shipment Costs
Or through T-code: OMWB
Use G/L account 614000 as used in standard
15) Automatic determination of CO assignments:
IMG Automatic Settlement  Shipment Costs  Transportation Logistics Execution Determination of CO Assignments
Or T-code: OKB9
16) Maintain shipping point address.
 Logistics Execution  Definition Enterprise Structure Define, copy, delete, check shipping point
17) Creating G/L account centrally.
Financial AccountingAccounting  Master Records  General Ledger 
Individual Processing Centrally
Or through T-Code: FS00
18) Enter the G/L account 614000 to the company code AFIL
19) Create transportation condition records:
 Shipment cost  Transportation  Master data Logistic Execution createPrices
Or thru T-code: TK11
Enter condition type FB00 that is freight condition type, which is used as standard in the shipping cost pricing procedure.
Enter the price and save it
Process:
1. The system determines the pricing procedure for the shipment cost item-using transportation planning point, service agent and shipment cost item category
2. Calculation Basis
3. Condition Record
4. Access sequence.
For the sales order, create a delivery using VL01N and pick the goods. Now create a shipment using VT01N and assign the delivery to the shipment document. Make sure to enter the carrier and other details before performing the transportation planning and execution. Save the shipment document and PGI for the delivery would be done automatically.
A shipment represents a physical goods movement between two or more locations.
For the system to create a shipment, shipping-relevant deliveries must exist.
You use Transportation Planning to group pending deliveries into shipments and then to perform the shipments.
The outbound delivery documents contain routes that the system calculates in route determination, and a transportation planning date for the delivery.
Dynamic transportation planning is responsible for grouping together outbound deliveries into shipments that have at least the same route, visit plan type and the same transportation planning date.
The following restrictions can be taken into account for a shipment in Dynamic Transportation Planning:
Weight
Volume
Variable capacity
Number of stops
Maximum duration
Loading units
Create Shipment Document
Use
After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
Transportation Create Single document Logistics Logistic Execution  TransportationPlanning
T.code: VT01n
Enter your transportation planning point and shipment type. Press enter.
Creating the shipment cost document
Use
After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
Single document Logistics Logistic Execution  Transportation Shipment cost Create
T.code: VI01.
After creation of shipment cost doc. You settle the Shipment cost.
Go to VI02, enter shipment cost no.and press enter.
Then go to Overview -- Fright cost items, Select the line item and double click it.
Go as main menu: Item --> Acc. assignment, you enter G/L acc. and cost center to which the transportation cost will be posted.
On the Standard change, details Freight cost items screen, then check the check box Transfer, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the Transfer check box.
Press save button on the current screen.
Shipment cost settlement and documents:
Use
After the shipment cost settled in shipment cost document, it has the following affects:
It creates a service entry sheet that refers to the purchase order determined.
It posts acceptance of services performed.
It creates an accounting document for the accruals.
Further subsequent documents are created in FI.
Create Delivery:
T.code: Vl01n
Create TO:
T.code: LT03
Create Shipment Document
Use
After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
 Transportation Planning  Create Single document Logistics Logistic Execution Transportation
T.code: VT01n
Enter your transportation planning point and shipment type. Press enter.
Creating the shipment cost document
Use
After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
Single document Logistics Logistic Execution  Transportation Shipment cost Create
T.code: VI01.
After creation of shipment cost doc. You settle the Shipment cost.
Go to VI02, enter shipment cost no.and press enter.
Then go to Overview -- Fright cost items, Select the line item and double click it.
Go as main menu: Item --> Acc. assignment, you enter G/L acc. and cost center to which the transportation cost will be posted.
On the Standard change, details Freight cost items screen, then check the check box Transfer, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the Transfer check box.
Press save button on the current screen.
Shipment cost settlement and documents:
Use
After the shipment cost settled in shipment cost document, it has the following affects:
It creates a service entry sheet that refers to the purchase order determined.
It posts acceptance of services performed.
It creates an accounting document for the accruals.
Further subsequent documents are created in FI.
Generally process is-
1) VL01N
2) VT01
3) VL02N - PGI
4) VI01
5) ML81N Service Entry Sheet
6) MIRO Invoice Verification
Shipping docs (VT01) are created before PGI...
You cannot carry out transportation planning or creation of shipment after the goods issue has been executed. Once goods issue is done it means that the material has left your premises so there is no need for a transportation planning after it.
In case you need carry out the shipment documents at the end of the day you could just create the delivery documents during the day and at end of the day create the shipment documents and the goods issue
This link is also usseful:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LETRA/SDTRA.pdf
Hope this helps you.
Regards
nitin

Restric to hierarchy nodes and characteristics at the same time

Hi together,
I've got a profit center hierarchy and an authorization object with those fields:
0CO_AREA
0PROFIT_CTR
0TCTAUTHH
The controling area is compounded to the profitcenter.
Then I created an authorization definition for hierarchies where i added a node from my profit center hierarchy.
But aditionaly I want to add a single Profit center, which is not below this node. but it does not work. I only get the profit centers below the node i maintained for the hierarchy authorization and not the single entry for the profit center
How can I setup this situation where I need to maintain on the one side one or more nodes in a hierarchy and then a single profit center which might be under another hierarchy node although this node is not explicitly allowed?
Kind regards
Stefan

Thanks for the reply. This issue is becoming a major problem for lots of implementations. I have sent out several forum and OSS on this but no solution.

Clustering problems and load balancing question

          I am using Weblogic 6.1. My Windows NT environment consists of 10 web client-simulator
          machines, 2 App. Server machines and one database server machine. I have defined
          one cluster on each app. server. Each cluster is running 3 Weblogic instances, or
          so it should be when I fix my problems!
          My questions/problems are the following:
          1. Can I use a software dispatcher to perform workload balancing between the 2 weblogic
          clusters? That is, the client-simulator machines send the requests to the software
          dispatcher which performs workload balancing between the 2 Weblogic clusters. The
          clusters perform round-robin amongst all instances. Note that the documentation only
          talks about Hardware Balancing.
          2. I am having problems with my multicast IP addresses. For instance, on one App.
          Server machine, I am using the multicast IP address: 239.0.0.1 for MyCluster. When
          I start the Admin Server, I get a JDBC error: "... multicast socket error: Request
          Time Out". I have used the utils.MulticastTest utility which shows the packets not
          being received:
          I (S1) sent message num 1
          I (S1) sent message num 2
          I (S1) sent message num 3
          I (S1) sent message num 4
          What am I doing wrong?
          3. Re. the cluster configuration:
          NOTE: I have executed my workload using 2 independent App. Server machines with a
          software dispatcher - no clustering. Each App. Server used a jdbc connection pool
          of 84 database connections. The db connections happened to become my bottleneck.
          When I tried to increase the number of connections in the jdbc pool, throughput decreased
          dramatically. Thus, I decided to add a cluster of Weblogic instances to each one
          of my 8 x 900Mhz machines in order to scale up. Unfortunatly, adding clusters have
          not been that simple a task - probably because I am totally new to the Web Application
          Server world!
          Here is what I've got so far:
          I have obtained 3 static IP addresses for the 3 instances of Weblogic instances that
          I wish to run within the cluster. All servers in the cluster use port number 80.
          There is a corresponding DNS entry for each IP address. My base assumption is that
          one of these instances will double up as the Administration Server... Is it true,
          or do I need to define a separate Admin server if I wish to run 3 Weblogic instances
          (each with a connection pool of 84 database connections for a total of 252 database
          connections)?
          Do I need to re-deploy my applications for the cluster? And if so, would this explain
          why I am having problem starting my Admin Server?
          I think this is it for now. Any help will be greatly appreciated!
          Thanks in advance,
          Guylaine.


          Guylaine Cantin wrote:
          > I am using Weblogic 6.1. My Windows NT environment consists of 10 web client-simulator
          > machines, 2 App. Server machines and one database server machine. I have defined
          > one cluster on each app. server. Each cluster is running 3 Weblogic instances, or
          > so it should be when I fix my problems!
          >
          > My questions/problems are the following:
          >
          > 1. Can I use a software dispatcher to perform workload balancing between the 2 weblogic
          > clusters? That is, the client-simulator machines send the requests to the software
          > dispatcher which performs workload balancing between the 2 Weblogic clusters. The
          > clusters perform round-robin amongst all instances. Note that the documentation only
          > talks about Hardware Balancing.
          >
          We also support software load balancers (for e.g. resonate)
          The software dispatcher should be intelligent enough to decode the
          cookie and route the request to the appropriate servers. This is
          necessary to maintain sticky load balancing.
          > 2. I am having problems with my multicast IP addresses. For instance, on one App.
          > Server machine, I am using the multicast IP address: 239.0.0.1 for MyCluster. When
          > I start the Admin Server, I get a JDBC error: "... multicast socket error: Request
          > Time Out". I have used the utils.MulticastTest utility which shows the packets not
          > being received:
          >
          > I (S1) sent message num 1
          > I (S1) sent message num 2
          > I (S1) sent message num 3
          > I (S1) sent message num 4
          > ...
          >
          > What am I doing wrong?
          >
          You should run the above utility from multiple windows and see if each
          of them being recognized or not.
          i.e. java utils.MulticastTest -N S1 -A 239.0.0.1
          java utils.MulticastTest -N S1 -A 239.0.0.1
          > 3. Re. the cluster configuration:
          >
          > NOTE: I have executed my workload using 2 independent App. Server machines with a
          > software dispatcher - no clustering. Each App. Server used a jdbc connection pool
          > of 84 database connections. The db connections happened to become my bottleneck.
          > When I tried to increase the number of connections in the jdbc pool, throughput decreased
          > dramatically. Thus, I decided to add a cluster of Weblogic instances to each one
          > of my 8 x 900Mhz machines in order to scale up. Unfortunatly, adding clusters have
          > not been that simple a task - probably because I am totally new to the Web Application
          > Server world!
          >
          You have to stress test your application several times and set
          maxCapacity of the conn pool accordingly.
          > Here is what I've got so far:
          >
          > I have obtained 3 static IP addresses for the 3 instances of Weblogic instances that
          > I wish to run within the cluster. All servers in the cluster use port number 80.
          > There is a corresponding DNS entry for each IP address. My base assumption is that
          > one of these instances will double up as the Administration Server... Is it true,
          > or do I need to define a separate Admin server if I wish to run 3 Weblogic instances
          > (each with a connection pool of 84 database connections for a total of 252 database
          > connections)?
          BEA recommends to use Admin server for administrative tasks only
          like configuring new deployments, jdbc conn pools, adding users etc..
          It's not a good idea to have admin server part of cluster.
          >
          > Do I need to re-deploy my applications for the cluster? And if so, would this explain
          > why I am having problem starting my Admin Server?
          >
          You have to target all your apps to the Cluster.
          > I think this is it for now. Any help will be greatly appreciated!
          >
          > Thanks in advance,
          >
          > Guylaine.
          >

Delivery date and loading date is same

Hello ,
Issue decription:
The system calculating delivery=loading date , though the route is maintained for 9 days trasit days.
This problem is with only one routeA.
When i have created SO for material M123 with route "B" shipping Point 0001, the system consider transit duration of the route.But when Sales order (SO )is placed for materail M123, shipping Point 0001, and route A, system is not considering the transit duration.
Kindly let me know any config change is required with respect to route or forwarding agent.

Hi,
Check for the route A what's the transit duration time has maintained.The system uses the transit time from delivery scheduling as well as other time estimates (for example, the loading time) to determine the dates by which the goods must be available for picking, packing, and loading.Finally check the factory calendar if forwarding agent facory calendar has not maintaained it will consider the shipping point calendar.
Regards,
Hari Challa.

The time for transit, transportation lead time and loading time of the mate

Dear Friends,
Please mail to me, where should I give the time for transit, transportation lead time and loading time of the material at the ware house.
This is at the time of Transportation scheduling, for a specific material.
With regards,

i am giving u the exact & specific answer.
please follow the menu path in SPRO
IMG, Logistics execution, shipping, basic shipping functions, scheduling, delivery and tranportation scheduling, maintain duration,
In that screen, maintain the settings
Hope it answers
Do reward points if it is useful

7.5 Hierarchy Master Data Load

Hi experts,
I am trying to load material masterdata with a hierarchy.
When I was loading my members I applied an attribute filter.
It loaded OK and loaded the hierarchy nodes ok.
Then as I went to load the hierarchy it gave me an error saying that "Hierarchy nodes include dimension members that do not exist"
When I checked through the log I could see that the "missing" members where all the ones that I had filtered out with the attribute filter.
But it seems the hierarchy load needs them?
Is there a way to apply the same filter in the hierarchy load? Or any other way around this?
Or can an attribute filter only be used if you are not loading hierarchies?
Thanks

Hi Joergen,
Thanks so much for your quick reply.
My problem is not that my nodes don't load. They do actually come through fine in my first master data load.
But then when I load the hierarchy BPC complains that the node I want to now create as parents has members that don't exist in BPC. These are basemembers, not nodes.
For example:
BW:
Parent A:
   Child A
   Child B
   Child C
BPC
I only load Child A and Child B because Child C does not meet the attribute filter
When I then load Parent A I get an error that Child C is missing?
Regardless I tried your method and it didn't work for me?
-First I loaded my members only with the attribute filter - no problem
-but then I put in a rubbish filter like you said and ticked to load the hierarchy nodes. When I choose the AND filter nothing is being loaded at all. when I choose the OR filter it loads everything (incl the members that I excluded in the first load)?
Did I understand that wrong?
Thanks
Sabine

Transportation planning pt. and loading points

Hi Experts,
How many Transportation planning pt. and loading points is to be maintained?
Is it to be maintained according to plants?
Thanks in advance
Regards,
shabnum

Dear Shabnum
The transportation planning point is an organizational unit in Logistics, responsible for planning and processing transportation activities.
It organizes the responsibilities in a company, e.g. according to shipment type, mode of transport or regional departments.
Loading Point is nothing but Shipping points which are independent organizational entities within which processing and monitoring of the deliveries as well as goods issue is carried out. A delivery is processed by one shipping point only.
A shipping point can be determined for each order item. How the shipping point is determined depends on three factors:
=> The shipping conditions from the customer master record (Shipping screen)
 For example, it might have been agreed with the customer that the goods are to be delivered as soon as possible.
=> The loading group from the material master record (Sales/Plant Data screen)
 You could, for example, specify a loading group that defines that the goods must always be loaded with a crane or a forklift.
=> The delivering plant
 This plant is determined per order item either from the customer master record or from the material master record. However, you can also enter it manually for each order item.
Thanks
G. Lakshmipathi

I am using FCP 7.0.3.on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

.. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update" It's a full version "upgrade" that has to be done using the install discs (or disc images).
-DH

Hi, I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while." I rebooted and it didn't fix the problem. I just got

Hi,
I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while."
I rebooted and it didn't fix the problem. I just got my iPhone 4s (unlocked right from Apple) several weeks ago.

Siri has been a bit more erratic than usual in the last week or so. Apple has announced a major announcement for 9/12. Conclusions are left to the reader.
Best of luck.
(Occasionally from Lower Economy, Colchester County).

Firefox is taking a long time to open and load my home page, didn't happen while the old version. Also stops responding frequently.

Hello there,
I have been a loyal user of Firefox since 2005 and have never had and issue with this browser. It has been my top choice when it comes to using it in my devices along with suggesting to other people. The problem I have recently began to experience happened after updating to the newer version...4 or 5, not sure which. My Adobe Flash player is up to date and have no add-ons running that are not part of the default browser.
When I click the icon it takes a long time for the window to show up and a good minute before the homepage shows up and is functional to use. I never had this issues with previous versions so I am assuming there might be some bug causing this particular problem. Also, when I am playing games Firefox decided to stop responding and I have to force quit so my games don't suddenly slow down. I am running Mac OS X 10.6.7; I also tested opening Safari and it opened and loaded the homepage is about 3 seconds, I don't wanna have to switch unless I have to. Any help is appreciated, thanks. :)

Hi Donekes,
First off I need a little more information to help with troubleshooting. You say that an error occurs when you "try to re-open the same problem app before the old session completely exits". Does the error have an error code or dialog display? It may also be possible to receive an error log. Here is a knowledge base that explains how to retrieve error logs.
http://digital.ni.com/public.nsf/websearch/54E361E3FF477EC186256C320068184F?OpenDocument
If you are able to get that information then please post. Have a good day.
Brian K.

WebI issue with hierarchy display and aggregation

Trying to wrangle what looks like a defect in WebI's handling of hierarchy display and aggregation. We just completed an update cycle and are running BOBJ 4.1 SP4.
The hierarchy is a standard FM Commitment Item hierarchy in which both the nodes and leaves are Commitment Items (i.e. it uses InfoObject nodes, not text nodes). An example of one of these nodes looks like this in BW:
Cmmt_Item A - Node
    Cmmt_Item B - Leaf
    Cmmt_Item C - Leaf
Let's pretend Commitment Item A has $50 posted to it, B has $20 and C has $30. Analysis for OLAP handles this by adding a virtual leaf line to distinguish postings that are on the parent node like so:
Cmmt_Item A - Node       $100
    Cmmt_Item A - Leaf    $50
    Cmmt_Item B - Leaf    $20
    Cmmt_Item C - Leaf    $30
So you see both the total for the node ($100) and a line for each Commitment Items with KFs posted to them. Our users like this. They can easily see the aggregation and the breakdown.
WebI, on the other hand, will display it like this:
Cmmt_Item A - Node       $150
    Cmmt_Item B - Leaf    $20
    Cmmt_Item C - Leaf    $30
It doesn't create a separate line for the value of the parent node, but it does add it's value into the aggregate. Twice. Modifying the table with the 'avoid duplicate row aggregation' checkbox yields output like this:
Cmmt_Item A - Node       $100
Cmmt_Item A - Node        $50
    Cmmt_Item B - Leaf    $20
    Cmmt_Item C - Leaf    $30
We're about halfway there. While the top row now shows the correct aggregation and it creates a new line to show the distinct amount on the parent node, that new line appears on the same level as the parent. It's no longer clear that there's an aggregate and a breakdown. And attempting to expand or contract a node will now crash the report with one of those 'Error 16' messages.
Has anyone encountered this issue with hierarchies in WebI? This report was built from scratch in 4.1, so I'm not sure if this affects older versions or not. Or if it would affect any hierarchy that uses InfoObject nodes instead of text nodes.

Without a fix, the simplest workaround I can think of would be to restructure the hierarchy. It can't use postable nodes, so Cmmt_Item A - Node from my example would need to be converted into a text node and the postable characteristic added as a child on the same level as the B and C leaves.
This looks like it would affect anyone using hierarchies with postable nodes in a WebI report.
Another oddity in WebI's behavior here - even though the postable nodes show incorrect sums the sum at the root node is correct. So extending my examples from the original post:
Root Node                    $100
    Cmmt_Item A - Node       $150
        Cmmt_Item B - Leaf    $20
        Cmmt_Item C - Leaf    $30

Update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow.

update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow. Most infuriating is that YouTube was deleted from my entertainment apps and I now have to pay for it if I want it back!! This is a bloody disgrace.

Back up all data.
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

My iPhone will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings. I have no back up of my phone I've also tried the home/sleep button thing but nothing

My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

Hierarchy maintain and load

Similar Messages

Maybe you are looking for