HIERARCHY NODE 0HIER_NODE FROM COPA

Hello,
I create a hierarchy datasource for COPA for a specific CO-PA characteristic in SAP.
Datasource is OK in R/3 in transaction
RSA6in SAP ECC. The description for a node is OK in SAP ECC.
Example :
1st Node :
000000000000099 description All Channel OK
I execute my info package in BW to extract hierarchy. My
hierarchy is OK. But the description of node isn't good. I have the technique description (table RSTHIERNODE) for info objet 0HIER_NODE.
Example in BW :
000000000000099 00000001 0HIER_NODE
Description : 00000000000000000000000000000099
Transaction SE16 for Table RSTHIERNODE :
DE A 99 000000000000099
EN A 99 000000000000099
FR A 99 000000000000099
So i want to have the good description for the Hierarchy Node(s) info objet 0HIER_NODE.
Can you give me the solution to charg 0HIER_NODE ?
Best regards.
Rémi

Hi,
Presume you used keb1 to do this. We are struggling with this too?
Has anyone else managed to do this in BW, currently on 04s here.
Cheers,
Sarah

Similar Messages

How to provide a list of Hierarchy-nodes for selections?

Hi specialists,
some of our users often want to use some hierarchy-node-values from one report as filter of a 2nd report.
For all non-hieararhy-values it is possible to do that using the clipboard.
But there seems not to be a way to do the same with hierarchy-nodes.
Is there any workaround to reach that target?
Btw: I'm talking about users using the BEx 3.5 Analyzer.

Hello,
was this problem resolved?
can you please temm me how you resolved this issue?
Actually I also am having similar requirements in the project.
Thank you.

Display of Hierarchy Nodes as Medium Text in Web Report

Hello everyone,
Does anybody know how to display the hierarchy nodes as medium text instead of short text (default) in web report?
I know it is possible to change the display setting directly (by right clicking on hierarchy node > properties) from the web report.
However, I would love to know if there is any other way to change the settings such as through Query designer or Hierarchy maintenance in SAP GUI so that users do not need to change the display settings every time they view the web report.
Your help is kindly appreciated.

Thank you Shabar for you quick reply.
What if a Hierarchy is created under an InfoObject? How can I change the Text view of each name of the Hierarchy nodes?
In Query Designer, I tried to change the Text View to Long but it only affects the text of the InfoObject but not the Hierarchy nodes.
I tried the 2nd suggestion too. I only can find the BEx description for the InfoObject but not the Hierarchy nodes.
It would be great if anyone could tell me how to do so.
Thanks in advance.

Hierarchy Node Sheets

Hello again,
I am looking for a function module or snippet whereby I can create a list of Hierarchy nodes sheets from a "Cost Center Hierarchy node" as input. please help.
Thanks,
sebastian

At the outset, i am not very clear about ur Q.
but u may try these codes in R/3, which will give u the hierarchy structure
KSB1, KSH3, KS03
Not sure, how much it can help, but give it a try.

Hierarchy Sheets creation from a Hierarchy Node

Hello,
I am looking for a sample function code module or snippet whereby I can create a list of Hierarchy nodes from a "Cost Center Hierarchy node" as input. please help.
Thanks,
sebastian

Hello,
I am looking for a sample function code module or snippet whereby I can create a list of Hierarchy nodes from a "Cost Center Hierarchy node" as input. please help.
Thanks,
sebastian

Hierarchy Node Intial load from R/3 to CRM 5.2

Hi
I have this problem when download form R/3 4.6c to CRM 5.2 hierarchy node.
Can you help me?
It's very important because we are blocked.
Thanks
Best regards.
we downloaded the following customer hierarchy:
0002189004
- 0002199004
- 0002190509
- 0002010050
using the object DNL_BUPA_KNVH.
In this way the table CRM_KNVH_TEMP has been filled correctly with all
the structure.
We executed the BPH_DNL transaction selecting only the hierarchy type
D,
and the sales org D468, distr chann 01 , divsion 99.
After saving the hierarchy we created all the hierarchy structure in
CRM but there are not any customers linked to the related hierachy node.In particular we found the followng situation:
table BUT_HIER_NODE, filled with all the hierarchy node
table BUT_HIER_NODE_D fille with all the descrption of the hiarachy
node in english language
table BUT_HIER_STRUCT filled with the structure and the link between
node
tables BUT_HIER_TREE,. BUT_HIER_TREE_d filled with all our hiearcy type
table BUT_HIER_NODE_BP empty
also:
the method "assign_bp_to_node" is only executed in the the private
method
"change_record" but it is commented in the method "create record" and
also
"build_crm_tree".
In conclusion the method "start_initial_down_load2 (executed int the
function CRM_BUHI_INITIAL_DOWNLOAD) call the method 2build_crm_tree2,
but this method never execute "assign_bp_to_node".

I have found a propoer articulation of my problem in SAP note 429423. It goes as follows:
<i>"No entry exists in one of the queues, but the status in R3AM1 remains 'Running':
In this case, probably no reply is sent to the CRM Server after the data selection in the source system.If this is the case for an adapter object but not for others, contact the respective application component which can analyze why the source system does not send a reply and correct it.
If this system response occurs for all adapter objects, create a message for component CRM-MW-ADP."</i>
However, I am unable to act on the above. Kindly suggest what exactly needs to be done as suggested in the note.

Download of hierarchy nodes and accounts from BW

Hi,
Does anyone know how to download a list of the hierarchy nodes and accounts out of BW? I need the list to work on some analysis and documentation.
Thanks in advance.

Hi Jackie,
Have you seen this document:How to Download a Hierarchy to a Flat File
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0403a990-0201-0010-38b3-e1fc442848cb
Hope this helps...

How to pass a hierarchy node variable value over OpenDocument?

Hello,
I have been unable to link to an instance with matching parameters with opendocument with hierarchy node variables.
Has anyone attempted this or been successful?
Please reference this post I had in the Web Intelligence forum. sInstance=Param not working for sap bw query based reports (FWM 02020)
Here's some background information
We've created 2 new crystal reports based of sap queries.
Report 1, single prompt, no hierarchy.
Result : Can link to specific instance with matching parameters. Great!
Report 2, single prompt, hierarchy based.
Result: Cannot link to specific instance with matching parameters
Parameter list for report 2
[!V000001} : Cost Center/Gr{oup (Multiple) = {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
However when I go into the history and look at the successful instance parameters used, it seems to be picking up an extra parameter ( my guess is node)
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
We have attempted to use the entire string, the first portion, second portion, and just the technical response. No luck.
Any help or pointers would be appreciated!
Nick

Hello Ingo,
I'll explain the situation more clearly,
Report 2, single prompt, hierarchy based.
Result: Cannot link to specific instance with matching parameters with a response from the Bus Objects server
An error has occurred: The object with ID -1 does not exist in the CMS or you don't have the right to access it (FWM 02020)
We have 1 parameter for report 2
{!V000001} : Cost Center/Group (Multiple)
We selected a single value:
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
(The XXX, XXX, & XXX is the description)
We ran a successful instance.
However when I go into the history and look at the successful instance parameters used it displays the following:
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
An extra description seems to appear (The first XXX, XXX & XXX;) Our original selection was only {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
We attempted to build variations of the open document strings
1. We tried the entire parameter response,
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
2. The first description that was not part of the original selection,
XXX, XXX & XXX
3. The technical name and description
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
4. The technical name
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE}
Please let me know if you need more details.
Regards,
Nick

No Query Result After Using Hierarchy Node Variable (Customer Exit)

Hi
I have problem at my query. It doesn't show anything in BEx but when i check the data in BW using tcode LISTCUBE i can display the data.
This problem happen when i change the restrictions for one of characteristic in filter value.
The characteristic is custom Infoobject (ZCPARTNER), which like Infoobject Partner Unit.
Previously I set the restriction with constant value, example : A500,A700,A710,A720,A730,A740 and it worked before.
But when I change it using hierarchy node variable (customer exit), this problem is arise.
Here is my code at ZXRSRU01
WHEN 'ZHIEPART'. --> hierarchy node variable
   BREAK-POINT.
    IF i_step = 2.
    Read from ZZCONSGR information
      LOOP AT i_t_var_range INTO loc_var_range
         WHERE vnam = 'ZZCONSGR' OR vnam = 'ZOCONSGR'. --> read input value from consolidation group variable
        CLEAR l_s_range.
        CLEAR l_s_range-low.
        IF loc_var_range-low EQ '000000000000030000'
           OR loc_var_range-low EQ '000000000000010130'.
          l_s_range-low = 'MEZBUNITMDI'.
          l_s_range-high = '0HIER_NODE'.
        ELSEIF loc_var_range-low EQ '000000000000040000'
           OR loc_var_range-low EQ '000000000000010160'.
          l_s_range-low = 'MEZBUNITMPI'.
          l_s_range-high = '0HIER_NODE'.
        ENDIF.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
Here the hierarchy in BW system:
XXX Cons Unit Hierarchy Set; InfoObject ; Node Name
- XXX Cons Unit Hierarchy Set; 0HIER_NODE; ZBUNITALL
- XXX DownStream ... ; OHIER_NODE; MEZBUNITMDI
     - ME/A730; 0CS_UNIT; MEA730
     - ME/A740; 0CS_UNIT; MEA740
- XXX Power ; OHIER_NODE; MEZBUNITMPI
    - ME A800 - A808; OHIER_NODE; MEZBUNITMPI
    - PT Mitra xxx; 0CS_UNIT; MEA820
Anyone can help my problem? Thank you
Regards,
Satria B Tandyono

Hi Satria,
Instead of following code ---
CLEAR l_s_range-low.
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
l_s_range-high = '0HIER_NODE'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
l_s_range-high = '0HIER_NODE'.
ENDIF.
try this ---
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
ENDIF.
Note : whenver the option is EQ, the system takes only low value.

How to filter hierarchy node in BEX query designer

Dear experts
We are working on FI balance sheet with hierarchy infoobject 0GLACCEXT. Example of our balance sheet is as follow:
Parent Node A = 20
     Sub-parent Node A1 = 10
         Leaf A11 = 5
             Leaf A12 = 5
Parent Node B = 20
     Sub-parent Node B1 = 10
               Leaf B11 = 5
               Leaf B12 = 5
We require only:
    Sub-parent Node A1 = 10
    Leaf B12 = 5
So I filter those out in BEX restriction; however, after we examine the report in tcode RSRT, "Sub-parent Node A1" is not shown in BEX Report, and the result is as follow：
Parent Node B = 5
     Sub-parent Node B1 = 5
             Leaf B12 = 5
Are there solutions for us to show merely A1 and B12 ?

Hi Chu
Try the following steps.
Initial Output
In this example I will restrict the query for only displaying Node 8603 and leaf 9000
Proceed to restrict the Characteristic. Please be aware of the difference between hierarchy nodes and leaf characteristic values. Also set the Hierarchy display properties to expand up to level 1.
Execute the query again:
Please be aware that users will still be able to expand node 8603 and see the lower level nodes/leaf. In order to restrict users from doing this set up users authorizations.
Regards,
Carlos

DSO or ODS "Insert New Hierarchy Nodes" under Data Fields

When you insert info objects under the Data Fields in DSO right mouse click on the Data Fields icon and you will find Insert New Hierarchy Nodes . I created a hierarchy node with infoobjects associating with it which will be visible under the Filters Folder in BEx Query designer as a seperate folder. I can add them to the infoobjects from this folder into the query. I did not know how to apply this functionality in Queries and what it really does. My guess was you can create dynamic hierarchy using characteristic infoobjects from transactional data.Any ideas or links to documentation. This option was available from 7.X in DSO's and i think even in 3.x ODS.

Hi,
May help you:----
http://help.sap.com/saphelp_nw70/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
You could feel the flexibility of using this hierarchial display in the Query. Try to create any Query on this DSO.
Regards,
Suman

Passing hierachy node variable from BW to BO Webi Report in open doc link

Hello All,
We are working on BW-BO integration and creating Webi reports based on Bex queries.
The question is regarding passing of a hierachy node value from BW to BO through open doc link.
I see that when we pass hierarchy node value, we have to associate that with the corresponding infoobject technical name in the link but not sure in what format it has to be sent.
For example, if ARM is the node value and 0HIERNODE is the infoobject , how should we send this value to BO.
Please help.
Thanks for your help,
Regards,
Tangudu S

You cannot change anything here. You should really find out how the values are retrieved from the database
THere is another option:
1) Activate the tracing on your BOBJ server
Check the following SAP notes (http://service.sap.com/notes) for that:
Unix: Note 1235111
Windows: Note 1260004
2) Run your WebI report from the InfoView by choosing first the desired hierachy node value from the LOV of your prompt.
3) Extract the MDX statement from the log file. It should contain the value for the hierarchy node. Copy this to the URL
It is easier to find this out if you have access to a Crystal Reports Designer installation. Do you?
Regards,
Stratos

Issue with hierarchy node variable and multiple SAP hierarchies

Hello experts,
We are currently facing an issue when using two SAP hierarchies in Web Intelligence and one of them is restricted with a hierarchy node variable.
The systems we use are a SAP BI 7.01 (SPS 05) and a Business Objects Enterprise XI R3.1 SP2 (fix pack 2.3). I want also to point out that the fix pack 2.3 has been applied to all BOE related components: the SAP integration Kit, client tools, and enterprise (server and client).
The universe used in our scenario is based on a BEX Query with two hierarchies (non-time dependent hierarchies, intervals allowed) loaded on their corresponding characteristics. One of these characteristics is restricted with a hierarchy node variable (manual input, optional, ready for input, multiple single values allowed).
Prerequisites for replicating the problem:
1) When building the web intelligence query select several levels from both hierarchies (they have seven levels each) and the only amount of the InfoCube that the BEX query (that was used to create our universe) relies on.
2) In the hierarchy node variable prompt select a hierarchy node entry (not an actual InfoObject value that exists as transactional data in the InfoCube )
By executing the query built above, all characteristics are returned null (no value) and the key figure with value u201C0u201D. No error messages, no partial results warnings. Now if we go back to u201CEdit queryu201D and select levels of only one of any of the two hierarchies the query runs normally (by selecting the exact same value for the hierarchy node variable prompt).
Any ideas on the matter?
Regards,
Giorgos

Hi,
Have you ever got a solution for this problem?
I have a similar one.
Thanks,
regards, Heike

Data slice inconsistency problem with hierarchy nodes

Hi Experts,
We want to lock planning tables from function. We create the appropriate data slices but there are problems with (material group) hierarchy nodes.
If I give the node as input variable to the function it causes inconsistency in the data slice. If I choose and add this node to the lock in modeler, the problem is the same.
We are using the following variables to create a data slice:
0VERSION
0VTYTYPE
0COMP_CODE
ZGRMAT (developed material group)
Z_YEARCR (developed yera created)
The problem also exist if I set an another type of node e.g. destination country (0RECIPCNTRY) instead of material group.
For me, the problem seems to be generic.
Do you have any idea?
Many thanks in advance
Peter

There is a note related to this proble:
Note 1070608 - Lowflag field is not valid
The implementation of this note resolves the problem.
Peter

Lack of texts in hierarchy nodes and leafs for 0ORGUNIT

Hello experts!
We have the BCT hierarchy 0ORGUNIT in BW exporting his time-dependent structure from R/3. Now, for some leafes and some nodes above the leaf we have no texts just see the key.
Has someone an idea what the problem could be? In R/3 we have the text and in master data of 0ORGUNIT we also have the text within the right time period...
Thanks for help!
Best reagards,
Peter

I'm not sure I understand what you are suggesting. Here is the data we have:
Hierarchy             Key Figure
- CC 0001 (node)      30.56
CC 0001 (leaf)          6.45
- CC 0002 (node)       24.11
       CC 0002 (leaf)     6.45
       CC 0003 (leaf)     5.72
       CC 0004 (leaf)     7.47
       CC 0005 (leaf)     4.47
We want the value 6.45 to show up next to the CC 0002 hierarchy node, since that is the value for that cc. And we want the 6.45 to show up against the cc 0001 node rather than adding everything beneath it. What you suggested below - is that a display option in the query, or where do I do it?
Thanks.

HIERARCHY NODE 0HIER_NODE FROM COPA

Similar Messages

Maybe you are looking for