Hierarchy node in query rows not showing values in report

Hi sdn
I'm taking hierarchy node on rows and some plan and actual values on columns but i'm unable to get values in the report for only plan values
How did I reconcile the values whether that value is available in hierarchy or corresponding value's for plan data is available in the cube,pls give me clues
rubane

Hi,
Could you please share the steps you have taken to fix the problem?
We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
Any help on this would be greatly appreciated.
Thanks,
Krish

Similar Messages

Hierarchy node Variable: F4 Help - Not showing Master data values

Hi,
We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
Thanks in advance for your help.
Regards,
Femmie.

Hi,
Could you please share the steps you have taken to fix the problem?
We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
Any help on this would be greatly appreciated.
Thanks,
Krish

How to switch ON/OFF Unassigned Hierarchy Nodes during Query Runtime?

We have a GL Account Hierarchy based on an FSV that we use in BW reports.
All our reports are web reports accessible via BW Portal.
This hierarchy has an Unassigned Node also that we have suppressed (switched off) for display via Hierarchy Attributes Settings.
When you check the Suppress Unassigned Node box the unassigned nodes do not show on the report.
This has been working fine so far until we have this one requirement where user would like to see unassigned GL Accounts also.
We would like to check/uncheck this flag (Supress Unassigned Node) during the query run time.
Is there a way to control showing/hiding of unassigned node of a hierarchy during query runtime?

Hi Ram,
If you have set hierarchy attribute as display unassigned node, then you can simply select the root as filter in order not to display the unassignd node.
However if you have set hierarchy attribute as suppress unassigned node, then you can't choose the unassigned node by the filter.
So if users want both, you need to set hierarchy attribute as display unassigned node. You cannot really change this setting at runtime by user.
Regards,
Patricia

F4 not showing values for Variable

Hi Everyone,
In BEx Web analyzer, the one of variable not showing values after pressing F4 but for the same query if we execute in BEx analyzer it shows the variable values.
How we can rectify this issue for BEx Web Analyzer?
Please suggest..
Thanks
Kind Regards
Anukul

Hi,
Just check following setting are also done.
transaction RSA1 -> Query-infoprovider -> "display" -> look for the relevant infoobject -> right-mouse-click -> "provider-specific Properties" -> "Query Exec. FilterVal"
Set this option to "Master Data" and recheck the behaviour.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20ecb78c-374a-2d10-c6af-f024f19b785d?QuickLink=index&overridelayout=true
If above doesn't help pl check for sap note.
Thanks and regards

Option claims from CRM are not showing in BW report.

Hi All,
We are having a problem with BW report. The report shows all the claims thatt are created in CRM system( spource sys- CRM). We notices that claims that are called as option claims are not showing in BW report, but they are present in BW. I have checked filters in report design. no filters exist. Where they are getting filtered out. Please help me.
Haaris..

Hi,
I am giving you ore information on the above issue, the above query is running on an infoset, I realized, data is missing from infoset. Where as the data is present in DSO.
The other thing I can see every other claim in BW, but I cannot see Option claim which are very less compared to other claims.
The infoset has four DSOs and one characteristic as components.
Please let me know if you get any idea?
Haaris.

Safari 6.0.1 not showing in System Report (installations)

I have noticed that Safari 6.0.1 is not showing in System Report (installations) only the previous Safari 5.1.7 - Anyone know why this should be so? Now in Mountain Lion we do not have the update info in Software Update as before; only by going to "About this Mac". Any help appreciated!

Now in Mountain Lion we do not have the update info in Software Update
If you click your Apple menu icon you should see Software Update from the drop down menu.
Clicking Software Update should open the App Store for you.

Query is not showing the values - authentication error

Hi,
After running a query it is not showing the values and showing "You do not have the authorization for the selected component."
Diagnosis
You do not have the authorization for the selected component.
System response
The selected component cannot be edited.
Procedure
lease speak to the person responsible for authorization, if you require authorization for the editing of this component. The function is protected by the object "Business Explorer - components" with the following fields:
InfoCube ZPLAYOPPT
Type of a component REP
Component PLAYBOOK_OPPT_1
Activity 16
Notification Number BRAIN 800
Can u pls tell me the solution.Thanks and Regards,
Giri.

Go to SU01, look at your authorization profile for which roles you are given. Then, go to PFCG and check out the roles and how they are defined. It is possible that you are not authorized to view application area, infocube, certain characteritics etc.
Hope this helps,
Regards,
Petter

New detail rows not showing

Hi,
Here's a little background on my problem. We have a simple master-detail hierarchy. Both have a ViewObject. The problem lies in the fact that our detail VO has a filter using a bind variable. The bind variable value is determined (most of the time) at the VO execution time: bindParametersForCollection is overriden and passes a value for the bind variable if it is null. In our specific case the variable represents the username of the authenticated user.
The main complexity lies in the UI. We present all the masters and their children in a single table in edit mode. We are using a tree binding with an accessor from the master node to the child node.
Example
Row 1: Master 1 Column 1 | Master 1 Column 2 | Master 1 Detail 1 Column 1 | Master 1 Detail 1 Column 2
                                             | Master 1 Detail 2 Column 1 | Master 1 Detail 2 Column 2
                                             | Master 1 Detail 3 Column 1 | Master 1 Detail 3 Column 2
Row 2: Master 2 Column 1 | Master 2 Column 2 | Master 2 Detail 1 Column 1 | Master 2 Detail 1 Column 2
                                             | Master 2 Detail 2 Column 1 | Master 2 Detail 2 Column 2
                                             | Master 2 Detail 3 Column 1 | Master 2 Detail 3 Column 2
Row 3: Master 3 Column 1 | Master 3 Column 2 | Master 3 Detail 1 Column 1 | Master 3 Detail 1 Column 2
                                             | Master 3 Detail 2 Column 1 | Master 3 Detail 2 Column 2
                                             | Master 3 Detail 3 Column 1 | Master 3 Detail 3 Column 2Everything works until we try to create new rows. In our use case, whenever we create a new master row, we also create a fixed number of detail rows. The number of detail rows depends on the context. Whenever we do this, the details rows do not show up in the UI.
In my experimentations, I found that the problem was caused by the bind variable on the detail VO. Tracing the detail VO query execution I came to the conclusion that unposted rows where rejected from the QueryCollection when there’s a bind variable. The debugger shows that in VO#executeQueryForCollection the QueryCollection#mUnpostedRows list is empty when there’s a bind variable while it is not when there’re no bind variable.
This is a major issue in our case, so I would like to know if you consider this as a bug (in my opinion it is). If yes, when can we expect a fix or workaround? Otherwise we’ll have to get around this problem by either finding a way to remove the bind variable OR do everything manually in a managed bean (which I would prefer not to have to do).
I have reproduced the problem in a SRDemo test case. Test case has been sent to Steve Muench.
Thanx!
Olivier

This looks very similar to Bug# 6412612 "New Row Lost After Executequery In Vo W/ Bind Variable In Where Clause", reported in the Tech Preview #2 release, and fixed in Tech Preview #3 (due out before the end of December 2007). Will try confirming with an in-house TP3 build that this fix fixes your testcase, too.

Why this query does not show the result?

Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
69662              HR                                 TABLE
                   OE                                 SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYS

Hi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl

Help with Planning Query - 0CALMONTH not showing up

Hi, I have a simple planning query where I am trying to allow users to input or change an Amount by Material/Month. The User inputs a Version and a Date Range to maintain. The selected dates should show up going across the screen even if there is no existing data. These Variables are in the Query Filter along with a few other characteristic Filters. So in my query I have 0MATERIAL in the Rows and I have 0CALMONTH and my Key Figure. Under advanced for the characteristic 0CALMONTH it is set as Master Data.
When I run the query for some reason the 0CALMONTHS do not show up going across. If I run the query and put in one value then the 12 months show up. Seems like a bug. I have another similar query where this works. Can anyone take a look at the screen shots and help me figure this out?
[Query Def Screen 1|http://i35.tinypic.com/1h8con.png]
[Query Def Screen 2|http://i36.tinypic.com/1f781c.png]
[0MATERIAL Def|http://i36.tinypic.com/xefq8i.png]
[0CALMONTH Def|http://i35.tinypic.com/ej8qpv.png]
Thanks!
Edited by: Kenneth Murray on Nov 5, 2009 3:12 PM

Dear Kenneth,
I think its a bug. If we post the value without the drilldown on 0CALMONTh then its open for the input, and after that if we drill down it with 0CALMONTH for same selection, it opens for input. but for new selection of month it not opens.
Have you solved the problem?
Regards,
V B Udani

Hierarchy Node- Overall query result

Hi Gurus,
I have a query with hierarchy nodes. For example
Measure
overall result
Measure set 1
ASA
ACEI
Measure set 2
HF
AMI
In the above result the option I chose for node position is ABOVE and I get the overall result below Measure.
But i need the following result:
Measure
Measure set 1
ASA
ACEI
Measure set 2
HF
AMI
overall result
I get the desired query if my option is Node selection 'BELOW' but the result is different which is not how I wanted
Measure
ASA
ACEI
Measure set 1
HF
AMI
Measure set 2
overall result
The actual scenario has arrow marks shown upwards or downwards but hope the overall picture is clear.
Any help would be greatly appreciated.
Thanks,
Nikki

Hi Nikki,
I also have the same requirement. And i think this is how the output is going to be(ie. the overall result row at the top) when you use the option Node Position 'Above'. I don't think it is directly possible in BEx to have the Overall Result at the end with the option Node position 'Above'.
Best Regards,
Sanjay

Input ready query is not showing loaded data in the cube

Dear Experts,
In Input ready query we have problem that it is not showing the values which was not entered by throught hat query. Is any settings in input ready query that we can do to populate the loaded data on the cube as well as data entered through Input ready query itself.
Thanks,
Gopi R

Hi,
input ready queries always should display most recent data (i.e. all green and the yellow request). So you can check the status of the requests in the real-time InfoCube. There should exist only green requests and maybe at most one yellow request.
In addition you can try to delete the OLAP cache for the plan buffer query: Use RSRCACHE to do this. The technical names of the plan buffer query can be found as follows:
1. InfoCube\!!1InfoCube, e.g. ZTSC0T003/!!1ZTSC0T003 if ZTSC0T003 is the technical name of the InfoCube
2. MPRO\!!1MPRO, e.g. ZTSC0M002/!!1ZTSC0M002 if ZTSC0M002 is the technical name of the multiprovider
If the input ready query is defined on an aggregation level using a real-time InfoCube, the first case is relevant; if the aggregation level is defined on a multiprovider the second case is relevant. If the input-ready query is defined on a multiprovider containing aggregation levels again the first case is relevant (find the real-time InfoCubes used in the aggregation level).
Regards,
Gregor

Please show this query, data not showing why?

I created a report and write following query,it was working well since last 4 months but today automaticly not showing data I can undertstand why?
Becuase I didnt make any changes in this query.
Please help me
Urgent
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
and merch_order.orderno not in
(select export_order1.orderno from export_order1)
ORDER BY MERCH_ORDER.ORDERNO
there is no any error and msg header and footer print.

Maybe , the query in "NOT IN" clause select export_order1.orderno from export_order1
return the same rows as the following portion return....
SELECT ALL MERCH_ORDER.ORDERNO, MERCH_ORDER.ORDERDATE, MERCH_ORDER.SHIP_DATE, MERCH_ORDER.PONO,
MERCH_ORDER.SUBPP, MERCH_ORDER.PJNO, BUYER.B_NAME, BUYER.B_AJENT,
MERCH_ORDER.ITEM, MERCH_ORDER.FABRIC, MERCH_ORDER.QUALITY, MERCH_ORDER.COMPOSITION,
MERCH_ORDER.P_SIZE, MERCH_ORDER.QUANTITY, MERCH_ORDER.Q_UNIT,
MERCH_ORDER.NETWHT, MERCH_ORDER.WT_UNIT, MERCH_ORDER.TERM, MERCH_ORDER.COMM,
MERCH_ORDER.PRICE, MERCH_ORDER.CUR_SYMB, MERCH_ORDER.STATUS, MERCH_ORDER.REMARKS,
MERCH_ORDER.WONO, MERCH_ORDER.PRONO, MERCH_ORDER.PES_QUANTITY,
MERCH_ORDER.PES_Q_UNIT, MERCH_ORDER.PES_PRICE, MERCH_ORDER.PES_CUR_SYMB
FROM BUYER, MERCH_ORDER
WHERE MERCH_ORDER.CANCEL IS NULL
AND (MERCH_ORDER.B_CODE = BUYER.B_CODE)
OR
there are no rows which conform to the joining condition between the two tables BUYER and MERCH_ORDER ....
Regards,
Simon

Last Result from Fulltext SQL Query Search Not Showing

I am creating a custom search results page for MOSS 2007 (using inline .aspx code - don't ask) that uses Fulltext SQL Queries. I get the results in a ResultTable (see code below) and then use a DataTable to write code to display it (I could have used
a DataGrid, I know).
The problem is that the last result is not showing. So, if it reports that there are 5 results, only 4 will show. I have verified that all 5 results do exist (using a slightly broadened query). If it reports 1 result, none exist in the DataTable that loads
the result data from the ResultTable.
FullTextSqlQuery query = new FullTextSqlQuery(site);
query.ResultTypes = ResultType.RelevantResults;
query.QueryText = qry;
query.RowLimit = 50;
query.StartRow = iPage;
try
ResultTableCollection results = query.Execute();
ResultTable resultTable = results[ResultType.RelevantResults];
DataTable table = new DataTable();
table.Load(resultTable, LoadOption.OverwriteChanges);
int n = resultTable.TotalRows;
The variable "qry" is a valid SQL Query with the relevant clauses.
I am using a foreach loop to go through "table" (a DataTable), and so I do not think that I have a "one-off error".
Any suggestions would be most welcome.

So in results you have all items but when you are loading it into table (type DataTable) you are loosing one last record.
1) First you check what data you are getting in resultTable - as you are specifying RelevantResult
2) Check last index of data in ResultTable collection and try to find out the last index ResultTable, or try to find last index of data in result table
DataTable.Load method accepts parm of type IDataReader and IDatareader, there are cases it looses records if not read properly..check below links
http://stackoverflow.com/questions/8396656/why-does-my-idatareader-lose-a-row
http://msdn.microsoft.com/en-us/library/system.data.datatable.load(v=vs.110).aspx
<hr> Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL <a href="http://insqlserver.com">Everything about SQL Server | Experience inside SQL Server </a>-<a href="http://insqlserver.com">Mohammad
Nizamuddin </a>

ORACLE RAC - 11G 2-NODE- OEL , asmdisk listdisk not showing disk in second node

Hi,
i am using vmware to install rac -2node .asmdisk listdisk not showing disk in second node.
my SCSI values are hardware : 0:0
hardware 2 = 1:1
please suggest. do i need to change the above parameter values.

Please elaborate more on this issue. Is this related to EBS? What are you trying to accomplish? Are you following any link/doc?
Thanks,
Hussein

Hierarchy node in query rows not showing values in report

Similar Messages

Maybe you are looking for