Hierarchy node not available in Query Designer

Hello Gurus,
I can find the hierarchy node variable in BW but it is not available in query designer. Does anyone know what might be the problem and a solution?
Thanks,
Mark

Hi Mark,
You said you "find the hierarchy node variable in BW but it is not available in query designer".
How did you find the hierarchy node variable in BW? From backend SAPGUI, you will only be able to see the variable in some internal tables like RSZGLOBV. Did you mean this?
For "it is not available in query designer", do you means that when you want to create a hierarchy node variable for this characteristic in Query Designer, you don't find this certain hierarchy node variable in the hierarchy node variable list?
Important thing to notice is that, flat value variables and hierarchy node variables are listed separately. Did you make sure that you have chose to list hierarchy node variables in Query Designer?
Regards,
Patricia

Similar Messages

  • Mapped characteristics in Multiprovider not available in Query Designer

    Hi,
    we have a multiprovider with approx 10 cubes and lot of characteristics, Navigational attributes mapped to it. I have added around 3 more characteristics and mapped to underlying cubes. But these added characteristics are not visible in Query designer.  Is there maximum limit for the number of characteristics.
    Thanks,

    Disconnecting the BEx made it work. But i dont understand i added this yesterday in the multiprovider. But i also removed some navigational attributes from the mapping. I will re-map and check. Thanks for the tip.

  • SAP-Exit option not available in Query Designer

    Hi,
    I'm trying to create a variable in BEx Query Designer that is processed by a SAP-Exit . But I don't have the option "SAP-Exit" in the drop down menu for processing type (from SAP-Help: In the variables editor, choose the processing type SAP Exit from the General tab page.).
    Am I missing any rights? Any ideas where the problem might be or is this just not possible at all and I have to use a customer exit?
    Regards,
    Alexander

    Hi, I think I didn't explain my problem right:
    I'm trying to use a variable in BEx Query Designer created by SAP that will be processed by a SAP-Exit. How can I add a SAP variable in BEx? I thought I have to create an own variable and assign "SAP-Exit" as processing type . But obviously this is wrong as I don't have the option for processing type "SAP-Exit". Any ideas?
    Thanks,
    Alex

  • Navigational Attributes Not Available in Query Designer

    I don't see navigational attributes under Dimensions/DimensionA in Query Designer. Is there a switch to enable/disable nav attr. in BW?

    Hi,
    Yes you need to switch on Navigational charateristics at DSO/CUBE and then add them to MultiProvider Dimension and assign then assign the fields.
    Thanks,
    Nagarjuna

  • Infoobject in infoset but not displaying in query designer

    Hi,
    I have created a query on infoset(ods1 & ods2).
    a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
    pls give your inputs,for why this infoobject is not available in query designer.
    Thanks
    Radika

    Hi Radika,
    I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
    Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
    Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
    Do this and see if it helps.
    Thanks & regards,
    Nikhil

  • Hierarchy not visible in Query designer

    Hello Experts.
    I am trying to create a query in BW 3.5 but I ran into one issue. I created a hierarchy for an Infoobject. But I am not able see this Hierarchy for the Infoobject in BW 3.5 Query designer although I can see it in BI 7.0 Query designer.
    Any help in this regards will be appreciated and points will be assigned.
    Than

    Check if you have made the "hierarchy" Active in your BW 3.5 query and also chosen the hierarchy correctly.
    Right click on the characteristic----
    > properties.
    Hope this helps.

  • Hierarchy node inputs in BEX query

    Hi,
    We have couple of BEX queries that has input variables with hierarchies, users like to type the multiple nodes in the hierarchy directly into the variable screen instead of expanding the hierarchy and picking the required nodes, is it possible, if yes, can you please share the idea, thanks
    Raman.

    Hi,
    Yes it is possible.
    You have to create Hierarchy Note variables. When you selected the hierarchy on the characteristic in the query designer, then goto restriction on the selected hierarchy, in the restriction window we can create Hierarchy Note varaibles, so at the varaible creation you give the option to select multiple entries.
    Check the below link for more information:
    http://help.sap.com/saphelp_nw70/helpdata/en/83/096d399bd2046fe10000000a114084/frameset.htm
    Hope this helps.
    Veerendra.

  • Hierarchy node not displaying some of child nodes

    Hi all,
    In my bex query for one of the hierarchy node  is not showing sum of its child nodes even though the belownodes got some data in it.
    What could be the reason.as all the other nodes at the same level are showing the sum of their child nodes.
    Thanks

    Display as hierarchy : no sum on node level.
    If the rows are set as u2018display as hierarchyu2019, all the objects in the rows section must have as setting for result rows : u2018always displayu2019

  • IP - Aggregation Level not showing in Query Designer as infoprovider

    Hi guys
    I just started implementing Integragted Planning at a new client. I created an aggregation level to build my input ready query. However this aggregation level is not available as an inprovider in the Query Designer nor is it available under the infocube in RSA1 on which the aggregation has been defined.
    Any suggestions?
    Thanks for your help.
    Ameya Kulkarni

    Hi Mayank
    Good point. But I could not see the aggregation level whatsoever in RSA1. The aggregation level is consistent and activated but does not show in the query designer.
    I was wondering if there is some configuration that I have to do to get the aggregation level available in the query desginer.
    Please let me know.
    Thanks,
    Ameya Kulkarni

  • Infoarea not appearing in Query designer

    Hi - I have some cubes created under cross application components infoarea but the infoarea is not appearing in the query designer. I have to create reports on these. how can I see them in query designer?
    Thanks,
    Raj.

    Hello,
    Please check your role. You do not have the authorization for that infoarea.
    Hope it helps,
    Regards,
    Meric

  • G/L Description not showing in Query designer for Characteristic values

    Hi Friends,
    We have developed a report and that we have made two New selections on the object 0GL_account....some GL Account number are grouped in that. While selecting the GL Accounts to new selection, it is showing GL Account number and Description. After that, the selected objects are not showing the Description in the query designer. It is showing GL Account number only for the both Technical name and  Description. I Would like to see Description of the GL Accounts in the Query designer. i have plan to delete certain account based on their dercription.
    And at the Infoobject description in the Business Explorer tab Display feild it is set as Text and Key. And till yesteday it shown the Description for the Account numbers. The daa loads are also .gone fine.
    Can you please guide me in this regards
    Thanks & Regards
    Anand

    Hi Thanks for your reply.
    The accounts which we selected are having Description  and it is showing while selection the selected GL Accounts.
    And the master data also is in active...When i try to activate the master data Agoin it is saying statement "Master data for characteristic 0GL_ACCOUNTactive"
    Any more suggetions..........
    Regards,
    Anand

  • Attribute not visible in Query Designer

    hi BI Gurus,
    I could not see some InfoObjects(Attributes) which are marked Authorization Relevant, in the query designer. And the strange thing is, they are not visible even for the user with SAP_ALL and 0BI_ALL assigned. The authorizations for the  cube in which the main char is used looks fine.
    I have checked all the options in RSECADMIN, everything looks good.
    pls help me in finding the solution..
    thanks
    Cnu..

    check out with the info object screen in attribute tab, navigational attribute on/0f switch box, if u r using FF source system.
    check out with the infocube whether u r checked the check boxes in navigational attribute tab.
    regards
    harikrishna.N

  • Refreshing Hierarchy node variable in BEx query with change in hierarchy

    Hi all,
    We have used a hierarchy node variable on Characteristic ZECCSAC (user-defined) and used it in a BEx query with default value set to a particular node value. Upto this, it is working fine.
    The hierarchy used in the query, with the hierarchy node variable, was later changed ( and in future it can undergo changes ). Since the number of records in the hierarchy are changing, the nodenames of the hierarchy nodes are changing. But the hier node variable default value is still set to the earlier nodename for that node description. So at runtime it is giving an error "ECCS Account Number is invalid"!
    Can anyone suggest how to refresh a hierarchy node variable default value each time a query is run so that the latest nodename is always taken ?
    Quick reply will be appreciated.
    Thanks

    Hi,
    You get this with User exits.
    Thnaks

  • Currency Translation type not available in query.

    Hi,
    I have a query developed on DSO, but here a currency translation type is missing where as in other queries developed on other
    cubes the translation type is available
    Is there any note available for this kind of problem or any setting available for this.
    Please advice.
    Thanks

    Hi bhanu,
    Did u enable the option of SID GENERATION UPON ACTIVATION?
    and tell me the step what have u created ?
    and error are u getting ?
    Thanx & Regards,
    RaviChandra

  • Value Ranges option not available in Query

    Hi ,
    I am trying to hardcode some GL ranges in Query global filter in prodution environment.
    But i feel strange the option is not available.
    I dev while creating new Query i have the option.
    Did any one face this kind of strange problem.
    Please adivce.
    Thank

    HI Kiran,
    You don't have authorization to see the value ranges.
    Login with other id which have the full permissions and check.It it is problem with authorization.
    Hope it helps.
    Thanks & Regards,
    Ramnaresh.P.

Maybe you are looking for

  • Remote Control doesn't launch Media Center on Pavilion dv9535nr

    Hi, is not big deal, but it's kinda annoying, the remote control (image) doesn't launch Windows Media Center with the top right button (green with Windows logo), I don't know exactly when, but it stopped launching Windows Media Center, and my OS (Win

  • How to track number of downloads or installs?

    Hi, I have created my first Adobe AIR desktop application. is there any way to track how many times it's downloaded and installed? Best Regards, Alok Jain

  • Any ideas when the c680032p10g will be available ?

    any ideas when the c680032p10g will be available ? Or any of the new 6800 line cards?

  • My CD burner won't work

    I have a new music CD I want to put on my iPod, but my CD stopped working. Is there a way to open iTunes on a different computer then put the songs in my iTunes library? I am at the library now and brought the music CD and also a flash drive thinking

  • Editing Metadata - locked out?

    I've just started with iTunes and am starting my library from my CD collection. Some CDs will import with minor glitches (for example, a 3-disc boxed set will come in with the boxed set name different for each CD, even though it should be the same an