Hierarchy Node Variable not working

Hello,
I created two variable one being Hierarchy Node variable and other Hierarchy variable.
I am using this for the Internal order hierarchy.
I amd also working on 2004s and not 3.5 version.
I restricted the Internal order and then selected the variable and then selected the nodes and before moving the Nodes variable, I also selected the Variable for the Hierarchy and then moved the Node variable to the right screen.
When I run the report, the option for the selecting the Hierarchy appears and I selected the correct Hierarchy, but when I go to the Hierarchy Node variable, I do not see the Nodes for that Hierarchy I selected in the first variable and it always like a fixed value Hierarchy defaults to the first Hierarchy. Hence I am unable to select the node to execute the report.
I would appreciate any ones feedback.
Thanks
Sundar

I am working in 2004s as well (SP11) and I am trying to do the same type of thing.
I have multiple cost center hieriarchies that the user can choose from at run-time using the hierachy variable.
Then once the user chooses to the hierarchy they then should go choose a specific node that they want to run for in that hierarchy using the Cost Center Hierarchy Node variable (using the hierarchy variable, not fixed hierarchy).
When I run this in the web I am allowed to choose one of the multiple cost center hierarchies... this means that the hierarchy variable is working, however when i go to choose the specific cost center node for that hierarchy it uses the defult cost center hierarchy instead of the one selected in the selection screen.
If anyone can shed some light on this it would be greatly appreciated.
Aaron

Similar Messages

Hierarchy Node Variable search (find) option not working

Hi Experts - I have created a hierarchy node varibale on a fixed hierarchy. When user run the report and click on hierarchy node variable selection option , A new window will pop up which has all the nodes.
As the list is quite big and has many levels , On the same pop up , we have find option , when we enter any node in the find box , its always give a ABAP Dump , It never works for me...
Is node find/search in not working in Bi 7.0 .
Thanks
R

Hi Rohan,
We can restrict the hierchey level at property of of the hiearchey enabled characteristic.
Hope this hels...let me know if u require any further info on this..
Best Regards,
Maruthi

BW hierarchy variable not working in Crystal Report 2008

Hi,
I have created BEx 7.0 report which has hierarchy on 0customer object, the report is working fine whith hierarchy variable. I have created Crystal Report by using this query as source. I have followed below link to create grouping to get data through hierarchy variable.
http://wiki.sdn.sap.com/wiki/display/BOBJ/BWHierarchiesinCrystalReports
But report does not work for hierarchy variable and report is blank. When I give filter of child node which has actual data then I get report output. For ex.
Below hierarchy for 0customer
11396
- 737007
- 123456
When I run report for 11396 then no data display but when I run 737007 child node I get report output but with blank group name.
Can anyone came accross this issue. Please guide me . Thanks in advance.

Thanks Ingo for your reply..
The word filter means, I have hierarchy node variable in the BEx report that has become Parameter in CR. When I give hierarchy node variable value of parent node then there is not data display but for the child node I get the data.
For ex. In the info cube there is data for 730707 customer but in the customer hierarchy the parent node of 73707 is 11396. I am giving 11396 in the variable pop screen for hierarchy variable. I do not see any data but for 73707 I get data.
User does not know 73707, he always enter 11396 customer no. and he gets data in BEx query that is source of CR. but crystal report is not showing data for 11396.
One more point I want to tell here, I am saving CR at my local system not to SAP BW server.
Hope this clear my issue.
Harish Swami
Edited by: hswami27 on Jan 31, 2011 8:17 PM

Hierarchy node variable - successor node data not displayed

Hello,
I have a query with a hierarchy in the rows section. This hierarchy is restricted by a hierarchy node variable with the following settings: variable type hierarchy node; customer exit; single value; mandatory; not ready for input; cannot be changed in query navigation.
The customer exit correctly supplies the node. However, only data for THIS node is displayed in the query results. And data for successor/underlying nodes is NOT displayed.
I tried several things, including:
- rightclick Rows > Display as a Hierarchy
- customer exit variable: multiple values instead of single value; optional instead of mandatory
In the Hierarchy Attributes for the hierarchy, nothing is checkmarked, except for Root/Totals Item Appears Above and Drilldown start level = 00. The hierarchy and its nodes are valid from 01.07.2005 to 31.12.9999.
I have a feeling in what area the solution can be found, but I have no clue what to do further on with it. As a test I replaced the customer exit variable with a user entry variable. If I then execute the query, I can select either the node or the value (both with the same technical value!). If I select the node, I get all data, including data for successor nodes. If I select the value, I only get the data for the node, not the underlying successor nodes. For some reason, the customer exit variable behaves like the latter and not like the first. I do not know how to solve this.
I would greatly appreciate if you could help me out of this issue here.
Kind regards,
Frank

Hi,
no, it doesn't. It just returns the data for the node and not for the underlying nodes.
Frank

Hierarchy Node Variable is not displaying full list of Hierarchy

Hi,
I loaded Hierarchy to an info object using flat file.
When i created a test reports and settings to display of MAster Data of Char and executed the report
The output displays full list of Hierarchy
Now to have a User Entry on Hierarchy ...created a Hierarchy Node variable and executed the value help of Hierarchy Node variable is not displaying fill list of Hierarchy ...its only displaying first 15 entries in Hierarchy.
I changed the settings of variable...etc but couldn't get the Hierarchy full list in User entry selection
How can i fix it...
Thanks in advance

If anyone has the same problem, I think I found the reason when transported to production.
BW7.3 (at least) can not show the hierarchy nodes if there is no transactional data loaded.
So do your hierarchies only after the data has been loaded..

How to pass a hierarchy node variable value over OpenDocument?

Hello,
I have been unable to link to an instance with matching parameters with opendocument with hierarchy node variables.
Has anyone attempted this or been successful?
Please reference this post I had in the Web Intelligence forum. sInstance=Param not working for sap bw query based reports (FWM 02020)
Here's some background information
We've created 2 new crystal reports based of sap queries.
Report 1, single prompt, no hierarchy.
Result : Can link to specific instance with matching parameters. Great!
Report 2, single prompt, hierarchy based.
Result: Cannot link to specific instance with matching parameters
Parameter list for report 2
[!V000001} : Cost Center/Gr{oup (Multiple) = {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
However when I go into the history and look at the successful instance parameters used, it seems to be picking up an extra parameter ( my guess is node)
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
We have attempted to use the entire string, the first portion, second portion, and just the technical response. No luck.
Any help or pointers would be appreciated!
Nick

Hello Ingo,
I'll explain the situation more clearly,
Report 2, single prompt, hierarchy based.
Result: Cannot link to specific instance with matching parameters with a response from the Bus Objects server
An error has occurred: The object with ID -1 does not exist in the CMS or you don't have the right to access it (FWM 02020)
We have 1 parameter for report 2
{!V000001} : Cost Center/Group (Multiple)
We selected a single value:
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
(The XXX, XXX, & XXX is the description)
We ran a successful instance.
However when I go into the history and look at the successful instance parameters used it displays the following:
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
An extra description seems to appear (The first XXX, XXX & XXX;) Our original selection was only {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
We attempted to build variations of the open document strings
1. We tried the entire parameter response,
XXX, XXX & XXX; {0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
2. The first description that was not part of the original selection,
XXX, XXX & XXX
3. The technical name and description
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE} - XXX, XXX & XXX
4. The technical name
{0COSTCENTER XXXXXXXX.BGT3}.{XXXXXXXXX.BGT3 0HIER_NODE}
Please let me know if you need more details.
Regards,
Nick

No Query Result After Using Hierarchy Node Variable (Customer Exit)

Hi
I have problem at my query. It doesn't show anything in BEx but when i check the data in BW using tcode LISTCUBE i can display the data.
This problem happen when i change the restrictions for one of characteristic in filter value.
The characteristic is custom Infoobject (ZCPARTNER), which like Infoobject Partner Unit.
Previously I set the restriction with constant value, example : A500,A700,A710,A720,A730,A740 and it worked before.
But when I change it using hierarchy node variable (customer exit), this problem is arise.
Here is my code at ZXRSRU01
WHEN 'ZHIEPART'. --> hierarchy node variable
   BREAK-POINT.
    IF i_step = 2.
    Read from ZZCONSGR information
      LOOP AT i_t_var_range INTO loc_var_range
         WHERE vnam = 'ZZCONSGR' OR vnam = 'ZOCONSGR'. --> read input value from consolidation group variable
        CLEAR l_s_range.
        CLEAR l_s_range-low.
        IF loc_var_range-low EQ '000000000000030000'
           OR loc_var_range-low EQ '000000000000010130'.
          l_s_range-low = 'MEZBUNITMDI'.
          l_s_range-high = '0HIER_NODE'.
        ELSEIF loc_var_range-low EQ '000000000000040000'
           OR loc_var_range-low EQ '000000000000010160'.
          l_s_range-low = 'MEZBUNITMPI'.
          l_s_range-high = '0HIER_NODE'.
        ENDIF.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
Here the hierarchy in BW system:
XXX Cons Unit Hierarchy Set; InfoObject ; Node Name
- XXX Cons Unit Hierarchy Set; 0HIER_NODE; ZBUNITALL
- XXX DownStream ... ; OHIER_NODE; MEZBUNITMDI
     - ME/A730; 0CS_UNIT; MEA730
     - ME/A740; 0CS_UNIT; MEA740
- XXX Power ; OHIER_NODE; MEZBUNITMPI
    - ME A800 - A808; OHIER_NODE; MEZBUNITMPI
    - PT Mitra xxx; 0CS_UNIT; MEA820
Anyone can help my problem? Thank you
Regards,
Satria B Tandyono

Hi Satria,
Instead of following code ---
CLEAR l_s_range-low.
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
l_s_range-high = '0HIER_NODE'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
l_s_range-high = '0HIER_NODE'.
ENDIF.
try this ---
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
ENDIF.
Note : whenver the option is EQ, the system takes only low value.

Using a hierarchy node variable in a BI 7 web template

Hi all,
I am searching for a way how to use a hierarchy node variable in a BI 7 web template. I have seen that there is a hierarchy web item, but I can only link that to a characteristic. I need to link the navigation item to a hierarchy node variable as I want to use the chosen variable value in a customer exit as well. Therefore the hierarchy web item is not working for me.
Is there any web item that can be used to offer hierarchy node variables as navigation options in a web template?
If you have any idea, every hint is highly appreciated!
Cheers
Tatjana

The Filter panel will only display you the characteristics and key figures available in the query.
If you want to add a combo box to make "on the fly" currency conversion, you'll have to do that by another way.

Passing hierarchy node variable in a hyperlink

Hi,
We are on XI 3.1 SP3.
We have a BW summary query with hierarchy active, with hierarchy node variable as "optional" selection variable. Created Universe based on the query and built a WebI report. Have activated "Drill". That way we are able to drill down per the levels. This works fine.
We have another BW detail query with optional hierarchy node selection. Created a universe and a WebI report for the detail report..
When we try to create a hyperlink from the summary WebI report to the detail WebI report in "display" mode, creation of Hyperlink is very intutive. We are able to pass parameters.and the hyperlink works fine.
The only problem occurs when we try to pass the hierarchy node variable value. The value of the hierarchy node gets passed, but the report does not bring over any data,
Is this a known bug? Is there a workaround.
Kindly advice.
Rgds

Hello,
Ingo, thanks for your comment Sorry for the delayed response.
Let me explain my scenario. On my report I have the following:
1. Sales Hierarchy (5 level hierarchy)
2. Product Group (Hyperlink created - want to pass Sales Hierarchy node value + Product group to detail report)
3. Key Figure 1
4. Key Figure 2
I have activated drill which allows me to drill down the Sales Hierarchy.
Scenaio A. Pass just the Product Group Key. Success
If I just pass the "Product Group Key", the detail report shows me the data for the specific Product Group as expected. This is a successful test
Scenario B - Pass the Sales Hierarchy Node key and the Product Group Key Fails
In this case, I am passing the "Product Group key" along with the "L00 Sales Hierarchy key". When I click on the hyperlink, it gives me an empty detail report. I know for sure that values exist for all levels. If I run my detail report stand-alone, I am able to get values for all levels.
However if I drill down to the last level in the Sales Hierarchy, the detail report shows correct value. For last level, the Sales Hierarchy Node value gets passed correctly along with the Product Group key.
URL generated is as follows:
http://<bobj server>:<port number>AnalyticalReporting/WebiView.do?bypassLatestInstance=true&cafWebSesInit=true&appKind=InfoView&service=/InfoViewApp/common/appService.do&loc=en&pvl=en&actId=216&objIds=6933&containerId=6923&bypassLatestInstance=true&lsMProductGroup=11101101&lsSGeoSales+Hierarchy=B01&isApplication=false&pref=maxOpageU%3D10%3BmaxOpageUt%3D200%3BmaxOpageC%3D10%3Btz%3DAmerica%2FDenver%3BmUnit%3Dinch%3BshowFilters%3Dtrue%3BsmtpFrom%3Dtrue%3BpromptForUnsavedData%3Dtrue%3B&sRefresh=N
In the URL you can see that correct values are getting passed
Product+Group=11101101
Sales+Hierarchy=B01
Do I need to append any value to the "B01" value ?
I did not understand the part about appending [ ] or 0HIER.
Can you please explain.
Thnaks for all your help.
Rgds

Hierarchy node variable in workbook

Hi all,
I am scheduling a workbook in precal,
The work has nine queries with same hierarchy node variable in all teh query selection.
The work book is taking long time in opening even when auto refresh is off.
the precalculation takes 30000 sec and running...
any thought on what can be done to reduce the calculation.
regards,
Rakesh.

Hi,
As precalculation just automates the process of opening, refreshing and applying the variant on a workbook I would suggest trying to find improvements there. Perhaps the notes below can help.
1289127
1160093
1179647
1260213
also use the latest precalc server support pack "BW 7.x precalculation service SP1200 - GUI 7.10" (note 1387291).
Thanks,
Michael

Issue with hierarchy node variable and multiple SAP hierarchies

Hello experts,
We are currently facing an issue when using two SAP hierarchies in Web Intelligence and one of them is restricted with a hierarchy node variable.
The systems we use are a SAP BI 7.01 (SPS 05) and a Business Objects Enterprise XI R3.1 SP2 (fix pack 2.3). I want also to point out that the fix pack 2.3 has been applied to all BOE related components: the SAP integration Kit, client tools, and enterprise (server and client).
The universe used in our scenario is based on a BEX Query with two hierarchies (non-time dependent hierarchies, intervals allowed) loaded on their corresponding characteristics. One of these characteristics is restricted with a hierarchy node variable (manual input, optional, ready for input, multiple single values allowed).
Prerequisites for replicating the problem:
1) When building the web intelligence query select several levels from both hierarchies (they have seven levels each) and the only amount of the InfoCube that the BEX query (that was used to create our universe) relies on.
2) In the hierarchy node variable prompt select a hierarchy node entry (not an actual InfoObject value that exists as transactional data in the InfoCube )
By executing the query built above, all characteristics are returned null (no value) and the key figure with value u201C0u201D. No error messages, no partial results warnings. Now if we go back to u201CEdit queryu201D and select levels of only one of any of the two hierarchies the query runs normally (by selecting the exact same value for the hierarchy node variable prompt).
Any ideas on the matter?
Regards,
Giorgos

Hi,
Have you ever got a solution for this problem?
I have a similar one.
Thanks,
regards, Heike

Selection screen for Hierarchy Node Variable

HI All,
I Have an issue with Hierarchy Node Variable , in my selection screen the for an info object , Z_ACCT i have a Hierarchy Node Varable it only displays Text on F4 help , i want to desplay both Text and Key , i check in the Info Object bex setting it is set as Text and Key, so if any one can throw some lite on it, it will be of grt help.
Regards,
Abraham

Hey, I found an SAP Note for this issue:
Note 912130 -
https://service.sap.com/sap/support/notes/912130
Looks like there is something that could be done.
Give it a try and hope this helps.

BW Hierarchy node Variable - Value help Issue in Crystal Report

Dear All,
1. We have created the BW-Query with Hierarchy node Variable .
2. On the above query we have preapred Crystal Report.
3. We have published the Crystal Report using BW Publisher ( Through Content Administrator in BW).
4. Followed the steps as below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsandBWquery+elements
Problem:
When we are accessing the Crystal Report in the InfoView BW-Hierarchy node variable is not appearing in the value help as a tree structure ( It is appearing as a list ).
Please suggest me the solution.
Thanks & Regards,
Kiran Manyam.

Classic Crystal Reports and Classic SAP connectivity questions
Classic Crystal Reports and Classic SAP connectivity questions

Refreshing Hierarchy node variable in BEx query with change in hierarchy

Hi all,
We have used a hierarchy node variable on Characteristic ZECCSAC (user-defined) and used it in a BEx query with default value set to a particular node value. Upto this, it is working fine.
The hierarchy used in the query, with the hierarchy node variable, was later changed ( and in future it can undergo changes ). Since the number of records in the hierarchy are changing, the nodenames of the hierarchy nodes are changing. But the hier node variable default value is still set to the earlier nodename for that node description. So at runtime it is giving an error "ECCS Account Number is invalid"!
Can anyone suggest how to refresh a hierarchy node variable default value each time a query is run so that the latest nodename is always taken ?
Quick reply will be appreciated.
Thanks

Hi,
You get this with User exits.
Thnaks

Reporting-Hierarchy Node Variable

Hi all,
A big hello! Can you please let me know how to create and maintain Hierarchy Node variable in the Bex reports? Its a very basic question but I am unable to work with it. please help me regarding this. If possible can you forward me relevent docs. my mail-id is [email protected]
many thanks

Hi Damoder,
You can see the options with Hierarchy Variables described well over here:
http://help.sap.com/saphelp_nw04/helpdata/en/83/096d399bd2046fe10000000a114084/content.htm
Hope this helps...

Hierarchy Node Variable not working

Similar Messages

Maybe you are looking for