Hierarchy not displaying

Hi
I have loaded hierarchy for three master data objects,but for all the cases i am unable to check the value and in the report the values are displaying not assigned.
Regards
Debasish

hello,
Check if you are able to view your hierarchy in the infoobjects tab in RSA1->modelling.
If yes, then in your query designer, select the infoobject on which you have created hierarchy.Go to hierarchies tab and select your hierarchy in your drop down list.
The values may come as # if there is not data in the IC for these nodes.Do check for the same in IC.
Reagrds,
Dhanya

Similar Messages

0GLACCEXT HIERARCHY NOT DISPLAYING IN REPORT

HI ALL
we have used virtual cube 0figl_v10 for our report in order to get the 0glaccext hierarchy
we have loaded the hierarchy and we see it is fine when seen through maintain hierarchies
but when in bex report we are not able to seee the hierarchical display of the kf values
we have loaded the hierarchy with idoc mode is it right or should we load in psa..
however we see the hierarchy display is fine..
but the problem is at the report level.
we have activated hierarchy in the 0glaccext properties in query designer
any suggestion
thanks & regards
krishna

Hi,
we have activated hierarchy in the 0glaccext properties in query designer--Have you selected the hierarchy name over from drop down
Regards,
Satya.

Data for a node in Hierarchy not displayed in BEx report.

I have a time dependent hierarchy on 0ORGUNIT. There is a report which displays employee wise, ORGUNIT wise data. This report is based on a Infocube which also has 0ORGUNIT updated in it as a charecteristic.
When i view the contents of the cube for a particular orgunit (5000397), employee (5980) for a particular time range (01.01.2011 - 16.01.2011), it gives me some data. However when i execute a report in BEx (7.0) with the same restrictions; it shows 'No applicable data found'.
In the query designer I have corectly assigned the hierarchy properties to 0ORGUNIT with the hierarchy name, version and date (last date of the user entered time range). Also the hierarchy has been uploaded with the latest data i.e. for orgunit 50000397 there is an entry for the period: 01.09.2009 - 31.12.9999.
Can you please suggest.

Can you check and make sure..that there are no other Global filters in the Query Design..
Regards,
Vikram

Cost Center Group Hierarchy not displayed in infopack selection

Hi All,
Suddenly my cost center hierarchy load failed with error "No Hier Selections". When i checked inside the infopackage selection, i was unable to find my cost center i was not able to see even after refreshing the r/3 hierarchy. I checked in RSA6 also but i still could not find that particular hierarchy.
I thought the hierarchy would have changed, so i checked in R/3 and the Hierarchy is visible by transaction code KSH3.
I want to load this hieararch to BW.. i am not able to see in infopack..
Kindly suggest and help.
Aravind

Under 0Costcenter, replicate datasource 0COSTCENTER_0101_HIER...
In the infopackage, under "Hierarchy Selection" tab, click 'Available Hierarchies from OLTP" button. Here check weather u can see that hierarchy

Hierarchy variable inpu help not displayed correctly in the portal

Hi ,
I have a problem when trying to select Hierarchy in the variable selection screen hierarchy is not being displayed
correctly in the portal/browser . When running the same report in BEX Analyser and in RSRT with HTML option the
hierarchy displays correctly in the variable selection screen .
In Portal Var selection screen Hierarchy is displayed side by side ie horizontally not level by level.
Please help.

Thanks Venkat, Problem is solved with the note u mentined

Hierarchy node variable - successor node data not displayed

Hello,
I have a query with a hierarchy in the rows section. This hierarchy is restricted by a hierarchy node variable with the following settings: variable type hierarchy node; customer exit; single value; mandatory; not ready for input; cannot be changed in query navigation.
The customer exit correctly supplies the node. However, only data for THIS node is displayed in the query results. And data for successor/underlying nodes is NOT displayed.
I tried several things, including:
- rightclick Rows > Display as a Hierarchy
- customer exit variable: multiple values instead of single value; optional instead of mandatory
In the Hierarchy Attributes for the hierarchy, nothing is checkmarked, except for Root/Totals Item Appears Above and Drilldown start level = 00. The hierarchy and its nodes are valid from 01.07.2005 to 31.12.9999.
I have a feeling in what area the solution can be found, but I have no clue what to do further on with it. As a test I replaced the customer exit variable with a user entry variable. If I then execute the query, I can select either the node or the value (both with the same technical value!). If I select the node, I get all data, including data for successor nodes. If I select the value, I only get the data for the node, not the underlying successor nodes. For some reason, the customer exit variable behaves like the latter and not like the first. I do not know how to solve this.
I would greatly appreciate if you could help me out of this issue here.
Kind regards,
Frank

Hi,
no, it doesn't. It just returns the data for the node and not for the underlying nodes.
Frank

0GLACCEXT hierarchy nodes description ( text ) not displaying

Hi Gurus,
I have uploaded 0GLACCEXT hierarchy from ECC system in to BI 7.0. I can only see the hierarchy nodes in the RSH1 and in the reports as well for 0GLACCEXT.But I am not able to see the hierarchy nodes description like under Expenses > salaries , wages , housing etc .....only its GL accounts is displaying like 700100 , 700200
I also uploaded Text datasource ( 0GL_ACCOUNT_TEXT ) for 0GLACCEXT , the text is loading without any problem but the changes are not being reflected in the RSH1 and the reports.
Regards,
-Neha

Hi KP,
Thanks for your reply , the text for 0GL_ACCOUNT is displaying fine , I don't have any issues with 0GL_ACCOUNT , my main concern is I'm using Financial Statement item 0GLACCEXT for Balance Sheet and P&L Statement (for period accounting) by using Virtual Cube 0FIGL_VC1 the Text is not displaying in the reports as well as in RSH1 , where as for 0GL_ACCOUNT the hierarchies and text are working and displaying fine.
I'm closing this thread , the problem has been solved
it was related to mappings in Transfer rules.
Regards,
-Neha
Edited by: Nehabibo on Dec 18, 2010 11:46 AM
Edited by: Nehabibo on Dec 18, 2010 11:47 AM

E-Recruitment u2013 Qualifications Catalog not displayed as a hierarchy view

Hi Expert ,
I have an issue where I need your support,
We are implementing E-recruitment EH4, E-recruitment is running on a separate instance,
ALE for moving Qualification groups & Qualifications has been done,
And I can use our qualifications with candidates or requisitions,
My issue here is Qualification group (QK) not displayed on a hierarchy view as displayed on R3,
T. Code OOQA as instance,
My case for example, we have only 5 main qualification groups and we have huge number of sub groups, so It comes on E-recruitment view as tap pages , Is there any way to view Qualification groups On a hierarchy view ,
Wait for your valid input,
Thanks,

Hi,
there is not really the possibility to have two different cataloges for internal and external candiates.
In most of the projects I did the customer decided on a standalone scenario for e-recruiting and created an e-recruiting qualification catalog which was much smaller than the one of the personal development on the hr core server. It was used more for a general orientation on a hand full of key language and IT skills. We usually had 2 or 3 QK with perhaps 20 or 30 qualification. Overall the customers tended to not to overrate the technical features of profile comparison between requisition and candidate. They just took the general information and had a look on it in the personal interview with the candidate - the candidates self evaluation is often not very exact ;o).
A possibility which might be interesting for you are the options for the T77S0 switch RECFA HRQUA. Have a look at the description for the IMG node unter E-Recruiting -> Technical Settings -> Set System Parameters. There is one setting that allows to use the full qualification catalog for internal candidates and only the QKs assigned to "SAP_ERECRUITING" for the externals.
Kind Regards
Roman

WebGUI does not display descriptions of hierarchy nodes in RSH1

Hello,
I want to enable end users to maintain a hierarchy via SAP GUI for HTML.
I built a transaction (ZRSH1_$my-hierarchy) that calls rsh1 directly with the parameters InfoObject and hierarchy name. It works just as expected.
Now when I call my transaction in the WebGUI, it opens the modification view of the expected hierarchy. That's ok.
But the text descriptions of all the nodes are not displayed. It just displays "0HIER_NODE" where the textnode descriptions should be.
Is that a bug? Or can I fix it somehow?
Thanks in advance,
Stefan
By the way:
I am on BI 7.0 with Integrated ITS 6.40
SAP Base 10
Message was edited by:
Stefan Voltz

Hi Vicky,
When you talk of views do you want to run the report in the web or the Analyzer?
If its the Analyzer, run your query - open and close whatever nodes you want in your query and on the Properties of the Query ensure that the Interaction Tab - Return to Global Definition is not enabled. Save your workbook and then when you reopen the workbook you will see the nodes opened or closed as you saved them.
Regards
Gill

Hierarchy Node Variable is not displaying full list of Hierarchy

Hi,
I loaded Hierarchy to an info object using flat file.
When i created a test reports and settings to display of MAster Data of Char and executed the report
The output displays full list of Hierarchy
Now to have a User Entry on Hierarchy ...created a Hierarchy Node variable and executed the value help of Hierarchy Node variable is not displaying fill list of Hierarchy ...its only displaying first 15 entries in Hierarchy.
I changed the settings of variable...etc but couldn't get the Hierarchy full list in User entry selection
How can i fix it...
Thanks in advance

If anyone has the same problem, I think I found the reason when transported to production.
BW7.3 (at least) can not show the hierarchy nodes if there is no transactional data loaded.
So do your hierarchies only after the data has been loaded..

Hebrew fonts from drop-down box not displaying in text box.

I am using InDesign CS 5.5 on a Mac 10.8.4.
When in ID, the fonts I am seeing on the Font dropdown menu when I try to use in a text box are not displaying correctly. They only display as boxes. The fonts are in the Hebrew language. They are properly installed in the FontBook.
Please help!! Thank you.

Reema,
I followed most of your steps. I have a question reg. step 3 ie populating data in node 1.
Here is my code:
method WDDOINIT .
types: begin of zs,
zktokd type kna1-ktokd,
end of zs.
data: handle1 type ref to if_wd_context_node,
begin of zstruct,
zktokd type kna1-ktokd,
end of zstruct,
zitab type table of zs.
handle1 = wd_context->get_child_node( name = 'NODE1' ).
*select ktokd into corresponding fields of zstruct from kna1.
*append zstruct to zitab.
*endselect.
zstruct-zktokd = 'Sold-to party'.
append zstruct to zitab.
zstruct-zktokd = 'Goods recipient'.
append zstruct to zitab.
zstruct-zktokd = 'Payer'.
append zstruct to zitab.
zstruct-zktokd = 'Bill-to party'.
append zstruct to zitab.
zstruct-zktokd = 'Prospective Customer'.
append zstruct to zitab.
zstruct-zktokd = 'Competitor'.
append zstruct to zitab.
zstruct-zktokd = 'Sales partners'.
append zstruct to zitab.
zstruct-zktokd = 'Hierarchy Node'.
append zstruct to zitab.
zstruct-zktokd = 'Named List of Accounts'.
append zstruct to zitab.
zstruct-zktokd = 'Distribution center'.
append zstruct to zitab.
zstruct-zktokd = 'Payer'.
append zstruct to zitab.
handle1->bind_table( new_items = zitab ).
endmethod.
Please let me know if this is the best way to populate the node and then bind the table values from the node to the drop down box.
Thanks and Regards.

TX CNS41 - settled cost from internal order to WBS element not displayed

Hi PS Expets,
I have a question regarding transaction CNS41 "Structure Overview" where cost settled from an internal order is not displayed in in the report for a selected project. This is in a ECC version 5.0
Settled costs from internal orders are posted with transaction type KOAO on WBS elements and when you check report RCNSTFCO you can see that the following transaction types are deselected when executing transaction CNS41:
delete t_rpsco_m where vorga = 'KOAO' "<   insert
                      or vorga = 'KOAL' "<   insert
                      or vorga = 'KOAP' "<   insert
                      or vorga = 'KOAQ' "<   insert
                      or vorga = 'KOAR'."<   insert
CALL FUNCTION 'HFPM_RPSCO_TO_RPSCO_LIS_CONV'
This is implemented according to OSS note 51971 in order to eliminate internal business volume in the project structure when executing a PS hierarchy report.
But this also eliminate the display of the cost from the internal order.
Any ideas or a work around in order to display settled cost from an internal order on a WBS element in transaction CNS41
Kind regards,
Anne

Hello Tison.
I guess you have the Project created with a BAPI in your system in background. As far as I have seen I'd try the following in ABAP to create Partners in the Project Definition: BAPI_BUS2001_PARTNER_CREATE_M or the corresponding method ProjectDefinitionPI.PartnerCreateMultiple. This should happen in background when the Project is created also.
Best regards.
Jens Schmid

BEx hierarchies not displayed in Crystal report parameters

Hi All,
I am trying to using a Bex query that has a cost center hierarchy with a variable that allows users to select specific nodes or even cost centers. In BEx reports, this query works fine and gives the users the view of the cost centres in a hierarchial manner. However, in Crystal reports, the query provides a drop down menu displaying a simple list of all the cost centres (not in a hierarchial manner). This confuses the user as to which element is a node and which is a cost centre
Kindly suggest how can we achieve the cost centre hierarchy to appear in the parameters in Crystal.
Thanks

Hi,
this is a duplicate to this entry:
key figures are not displayed in crystal report
Please do not post the same problem multiple times
regards
Ingo Hilgefort

Synced bookmarks can be searched for and found but many are not displayed on the complete scrollable bookmarks list.

How odd. I've a somewhat complex bookmarks menu hierarchy, perhaps two dozen folders each containing between five and fifty bookmarks as well as a sub-folder or two. All of this is synced and displayed correctly with the bookmarks tab in the app, except for some of the more recent bookmarks that not organized into folders, and are floating inside the bookmarks menu. Of thirty or so, only five appear. Yet, when I search for them within the app they are found, including several bookmarks made today. These are bookmarks contained in the bookmarks menu but not in any particular folders. Clearly they are synced, yet the entire contents of the bookmarks menu are not displayed correctly in the app. Syncing otherwise seems swift. I've less than 600 bookmarks in total. I seek not to search for specific bookmarks but to browse my entire collection, so you can sense my frustration. I'd call this a bug. Any thoughts? Thanks!

No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla.

New created values are not displaying after upload

Hi
I have created 2 key figures(Infoobject),4 new nodes and leafs(Hierarchy), to include the new logic at R/3 end as well as BW end.Every thing is fine even after doing full upload(repair).
When i execute the query the data is not populated in its respective infoobjects and hierarchy nodes and leafs.
Even 1 infoobject which is used for Counter value is not showing the counting as it's defined as aggregate to the info object Count and that included to ODS which is responsible for counting. after full upload it's not showing the counter values.
After full upload(Repair) all these entries are not displaying in the report against the data which is present at RSA3 level.
Can any one tell me how to make them available in the query even after data is uploaded / available in the bw.
Gaurav Upadhyaya
Edited by: Gaurav on Aug 26, 2008 10:55 AM

Hi,
You can´t see hierarchies in an infoprovider, so this is ok. A hierarchie is a part of an infoobject. But you say you have 2 new kefigures and they are not filled. I suppose you added both keyfigures to your DSO/Cube and to the datasource (in your source system). Have you extended the transformations between datasource <-> DSO and DSO <-> Cube too? Are the keyfigures correctly connected (in the transformations)? If yes, check your PSA after loading. Are the keyfigures filled here? If no, check the RSA3 in your source system. Are the fields for you keyfigures filled there?
Pls. check this all and tell us, what the result is.
Regards

Hierarchy not displaying

Similar Messages

Maybe you are looking for