Hierarchy not getting displayed in BPS top down planning

HI
As per our business requirement we have enhanced planning levels 4MP70000 and 4MP80000 to make it as planning function for four quarters. This is working fine as expected but we are facing issues in hierarchy. When implemented from CRM side we are seeing them as indpendent structures and not as hierarchies. Also the constraint that the sum of child node amounts should not exceed the parent node is not getting implemented. We used the hierarchy variable 4MKTHI01.
Please guide us what could be the issue and any help on this is greatly appreciated.
Thanks.

We got the sloution for this:
We need to make the hierarchy setting and tick the check entry box in top down planning layout. Then this is automatically taken care of.
Regards
Sirisha.

Similar Messages

  • Hierarchy not getting displayed

    Hi,
    I have changed the hierarchy by manual update i.e i have added a node to the hierarchy .
    And after that i have saved and activated the hierarchy .
    It was giving an error saying "Number of nodes in the node is more than the hiearchy ".
    The solution was given to "Supress the Inassigned Nodes".
    Now , i have did the same .But , still the values are not appearing when i am displaying in the reports.
    I.e i am selecting in the input screen where i have created a hierarchy variable.
    But , when i want to select the hierarchy in the report by F4 , i am not able to see the node which i newly inserted.Though , i am seeing in the rsa1 .
    Please help me with this.
    Regards,
    Balaji Raj

    We got the sloution for this:
    We need to make the hierarchy setting and tick the check entry box in top down planning layout. Then this is automatically taken care of.
    Regards
    Sirisha.

  • BOM is not getting displayed in case of centralized planning plant.

    Dear All,
    there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
    kindly through some light on it. whether i have to do some settings for it.
    Regards,
    Ritesh Kapoor

    Hi,
    Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
    Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
    Ritesh

  • Values not getting displayed for members which doesnt have parents

    Hi
    I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
    The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
    Is it a bug , we were able to do it in Express ..
    Can anybody help us in doing this.??
    Thnx in Advance......

    Hi,
    This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
    Hope this helps
    BI Beans PM Team
    Oracle

  • Default Value is not getting displayed in SUN ONE Ldap

    Hello,
    I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
    The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
    We need the default value to run our applicatin. Can anyone help me for this issue
    Regards,
    K. Senthil Kumar

    Hi anandkumar,
    I belive this issue can be resolved by changing the  Query proprties for the perticular field.
    Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
    __Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
    FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
    Hope this helps you!!
    Best Regards,
    Maruthi

  • Data is not getting displayed in my form

    hi,
    i have declared variable to hold amount in that as v_amt type konv-kwert in my program and in form interface in import parameters i gave it the same as v_amt type konv-kwert..............and in text i gave the variable v_amt.............
    but it is not getting displayed................

    Hi!
    on the application toolbar on the top a icon is there for Field list on/off.
    click on it.
    below left hand side field names will be displayed.
    now from the import parameter drag that parameter and drop it in the text boc where you are to display it.
    try this way.....it can work.....sometimes there is problem when u don't drag and drop the fields from the list box in the text nodes.
    Regards.

  • Hier Node with character (e.g. 11100A) is not getting displayed in report

    Hi All,
    I have loaded the Finanacial Statement Version Hier in BI. It is perfectly loaded in the InfoObject 0GLACCEXT.
    Some Hier Nodes contain charcters in the Node name like 1100A and 1100B and rest are all number like 1100, 1200, 11000 etc.
    While I run the Report the Hier Nodes with nos (like 1100, 11000) are perfectly getting displyed in the report. But the Hier Nodes having the characters (like 1100A and 1100B) are not getting displayed into the Report and all the GLs under it are going into Unassigned node in the Reports.
    Plz help me.
    Regards,
    Sandeep

    Sandeep,
    Your hierarchy is made up of characteristics with the values 1100, 11100A etc.
    In your hierarchy is RSH1, does each node have the specific characteristic value Node 1
    -1100
    -11100A etc
    Or is it a range i.e.
    Node 1
    1000 : 11100A
    Regards
    Gill

  • The html select box option is not getting displayed properly in IE11

    The html select box option is not getting displayed properly in IE11
    I have developed a website that has a select box drop down. The select box drop down is getting displayed properly in IE9. But in IE11, if I am selecting any option apart from the first one, the whole select box option is getting moved up in the page.
    In IE11, if option 2 is selected, then the select options is getting moved up. But in IE9, if option 2 is selected, then the select options is getting displayed properly.
    Please let me know the fix so that the select options are displayed in the same manner as in IE9.
    Sorry but I am unable to upload images as this site is throwing some error

    Hi Kevin Shen,
    Thanks for post.
    I tried above code in ie 11(version 11.0.9600.17633).
    But it is not working. If you select option 2, and open select box then it open on the select box.
    It should open below the select box.
    Code for above:-
    <select>
    <option>1</option>
    <option>2</option>
    <option>3</option>
    </select>
    Sorry I could not attach screen shot. We have normal select box with three options. If we select option 2, it is showing option list on the select box. It is coming below the select box in ie 10 and other browse like chrome. 
    So what we should do, so that all options will come below the select box?
    Thanks,
    Yogesh Toke

  • First Cell value in the first row of the structure not getting displayed

    Hi Friends,
                     We've got one structure at rows level, there as per our requirement i've taken around 12 "New Selections", that's ok i'm getting everthing fine, but whatever the new selection i put on the top of that structure in that, the First Cell Value for the first column not getting displayed...
                       I'm really wondering, this is the first time that i'm facing this kind of problem... what might be the reason & what is the solution for that...
    just awaiting for your inputs...
    Regards,
    Balaji Reddy K.

    There is no declarative way to do this as the table rows are stamped. This means there is no way to can access a value like (row+1).attributename
    So there is some coding needed. Check http://lucbors.blogspot.de/2012/02/adf-11g-fancy-master-detail-or-how-to.html and http://lucbors.blogspot.de/2012/02/adf-11g-even-fancier-multi-master-multi.html which might help you to implement your case.
    Timo

  • SUN ONE Ldap - Default value is not getting displayed

    Hello,
    I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
    The default value for the attribute has been given in the SUN ONE Ldap. But it is not getting displayed in our application.
    Can any one help me in this for this issue.
    Regards,
    K. Senthil Kumar

    I assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.

  • Projects are seen in workspace but not getting displayed

    I have some Web dynpro, JEEE, Dictonary DCs and projects in workspace, but it is not getting displayed when I open NWDS.
    I have given the correct workspace path but still the Project explorer is blank
    Please help.
    (P.S. NWDS was shut down improperly.)

    Closing this thread

  • Total is not getting displayed in the ALV output.

    Hi,
    Total is not getting displayed in the ALV output.
    I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
    Are  there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
    source code:
    DATA: layout TYPE slis_layout_alv,
          IT_eventS  TYPE slis_t_event,
          fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
    TYPES: BEGIN OF ty_tab,
          belnr TYPE dberchz-belnr,
          belzart TYPE dberchz-belzart,
          net TYPE dberchz-nettobtr,
          END OF ty_tab.
    DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
    SELECT belnr belzart nettobtr
      FROM dberchz
      INTO TABLE lt_tab[]
    WHERE belnr eq '000000000001'.
      if sy-subrc ne 0.
      ENDIF.
    *  defining layout
    layout-colwidth_optimize = 'X'.
    layout-def_status = 'X'.
    *defning event
    *event
    *defining field catalog
    fcat-col_pos = 1.
    fcat-fieldname = 'BELNR'.
    fcat-tabname  = 'LT_TAB'.
    APPEND fcat.
    fcat-col_pos = 2.
    fcat-fieldname = 'BELZART'.
    fcat-tabname  = 'LT_TAB'.
    APPEND fcat.
    fcat-col_pos = 3.
    fcat-fieldname = 'NET'.
    fcat-tabname  = 'LT_TAB'.
    fcat-do_sum = 'X'.
    APPEND fcat.
    *calling alv
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
      EXPORTING
        i_callback_program             = 'YZ_PLR'
    *   I_CALLBACK_PF_STATUS_SET       = ' '
    *   I_CALLBACK_USER_COMMAND        = ' '
    *   IT_EXCLUDING                   =
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
      EXPORTING
        is_layout                        = layout
        it_fieldcat                      = fcat[]
        i_tabname                        = 'LT_TAB'
        it_events                        = IT_EVENTS[]
    *   IT_SORT                          =
    *   I_TEXT                           = ' '
      tables
        t_outtab                         = lt_tab[]
    * EXCEPTIONS
    *   PROGRAM_ERROR                    = 1
    *   MAXIMUM_OF_APPENDS_REACHED       = 2
    *   OTHERS                           = 3
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
    Thanks,
    Gaurav

    Hi
    No I don't think, this is my code (based on your code) and it works fine:
    TYPE-POOLS SLIS.
    DATA: BEGIN OF LT_TAB OCCURS 0,
           BELNR LIKE BSEG-BELNR,
           GJAHR LIKE BSEG-GJAHR,
           WRBTR LIKE BSEG-WRBTR,
           WAERS LIKE BKPF-WAERS,
          END OF LT_TAB.
    DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
          IT_EVENTS  TYPE SLIS_T_EVENT,
          FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
          REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
    START-OF-SELECTION.
      FCAT-COL_POS       = 1.
      FCAT-FIELDNAME     = 'BELNR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'BELNR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      APPEND FCAT.
      FCAT-COL_POS       = 2.
      FCAT-FIELDNAME     = 'GJAHR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'GJAHR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      APPEND FCAT.
      FCAT-COL_POS       = 3.
      FCAT-FIELDNAME     = 'WRBTR'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-CFIELDNAME    = 'WAERS'.
      FCAT-REF_FIELDNAME = 'WRBTR'.
      FCAT-REF_TABNAME   = 'BSEG'.
      FCAT-DO_SUM        = 'X'.
      APPEND FCAT.
      FCAT-COL_POS       = 4.
      FCAT-FIELDNAME     = 'WAERS'.
      FCAT-TABNAME       = 'LT_TAB'.
      FCAT-REF_FIELDNAME = 'WAERS'.
      FCAT-REF_TABNAME   = 'BKPF'.
      FCAT-DO_SUM        = SPACE.
      APPEND FCAT.
      SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
        WHERE BUKRS = 'MAAB'
          AND BELNR = '0000000001'.
      LT_TAB-WAERS = 'EUR'.
      MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
    *CALLING ALV
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
        EXPORTING
          I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
        EXPORTING
          IS_LAYOUT   = LAYOUT
          IT_FIELDCAT = FCAT[]
          I_TABNAME   = 'LT_TAB'
          IT_EVENTS   = IT_EVENTS[]
        TABLES
          T_OUTTAB    = LT_TAB[].
      CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
    I've also inserted a currency field
    Max

  • Data is not getting displayed in the report from an Infoset.

    Hi All,
    I am having a report  based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
    While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
    Could anyone please suggest why the data is not getting displayed in the query designer.
    Thanks & Regards,
    A.V.N.Rao

    Hi Ashish,
    I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
    ECharacteristic 0TCAKYFNM does not exist. Check authorizations
    WThere are calculated elements. These results are bracketed [  ]
    and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
    Does this has any impact in QA.
    Thanks & Regards,
    AVN Rao.

  • '@' not getting displayed in the ALV report

    Hello,
    I am facing  a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
    can anyone please help me in resolving the issue.
    Thanks in advance.
    Thanks and Regards,
    Santhosh Guptha N.

    @ is a default value as per ALV internal process. This is used in icons .
    I think this is causing the confusion.
    Check in the fieldcat if there is any adjsutment to be made to handle this.
    Br,
    Vijay

  • Dynamic mandatory field error message is not getting displayed in webui

    Hi,
    In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
    Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
    I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
    Can anybody tell where the problem is?
    Thanks,
    Hari.

    Hi Hari,
    Really sorry do not know how to convert this nug file to text
    How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
    Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
    Thanks,
    Rajesh P

Maybe you are looking for

  • AVCHD - how should I extract separate clips?

    My first go around with AVCHD which I know nothing about except that after buying a nice new Sony video camera I have as a result on my first try-out, a single file called AVCHD even though I took several separate clips. When I click on that file on

  • 20" or 23" Cinema Display contrast ratio and models

    I am searching for a used Cinema Display, either 20 or 23". I want to ensure that I am getting a recent model, and I have seen mention of older 400:1 units, and newer generation 700:1 units. How can I tell what I'm looking at when I am searching? Are

  • Read messageID without Java Mapping

    Hello, is there a simple way to read the messageID and assign it to a target element without using a Java Mapping? Background is that I want to use a messageID as correlationID in a BPM send step. Maybe by using a UDF. Thank you for your help.

  • My i pad won't charge, I plug in and it comes up with 'not charging' in the corner???

    Yes so when I plug my charger into I pad a message comes up in the corner were the charge bar is with 'not charging' I have rebooted it, problem still occurs!!

  • Keyboard shortcut from 2003

    In 2003, I created this image (https://plus.google.com/photos/109848440303716014399/albums/5853949687704743473) by using the line tool and I believe a single keyboard shortcut then "drawing" in the irregular pattern. Illustrator inserted the lines at