Hierarchy not getting displayed

Hi,
I have changed the hierarchy by manual update i.e i have added a node to the hierarchy .
And after that i have saved and activated the hierarchy .
It was giving an error saying "Number of nodes in the node is more than the hiearchy ".
The solution was given to "Supress the Inassigned Nodes".
Now , i have did the same .But , still the values are not appearing when i am displaying in the reports.
I.e i am selecting in the input screen where i have created a hierarchy variable.
But , when i want to select the hierarchy in the report by F4 , i am not able to see the node which i newly inserted.Though , i am seeing in the rsa1 .
Please help me with this.
Regards,
Balaji Raj

We got the sloution for this:
We need to make the hierarchy setting and tick the check entry box in top down planning layout. Then this is automatically taken care of.
Regards
Sirisha.

Similar Messages

Hierarchy not getting displayed in BPS top down planning

HI
As per our business requirement we have enhanced planning levels 4MP70000 and 4MP80000 to make it as planning function for four quarters. This is working fine as expected but we are facing issues in hierarchy. When implemented from CRM side we are seeing them as indpendent structures and not as hierarchies. Also the constraint that the sum of child node amounts should not exceed the parent node is not getting implemented. We used the hierarchy variable 4MKTHI01.
Please guide us what could be the issue and any help on this is greatly appreciated.
Thanks.

We got the sloution for this:
We need to make the hierarchy setting and tick the check entry box in top down planning layout. Then this is automatically taken care of.
Regards
Sirisha.

Hier Node with character (e.g. 11100A) is not getting displayed in report

Hi All,
I have loaded the Finanacial Statement Version Hier in BI. It is perfectly loaded in the InfoObject 0GLACCEXT.
Some Hier Nodes contain charcters in the Node name like 1100A and 1100B and rest are all number like 1100, 1200, 11000 etc.
While I run the Report the Hier Nodes with nos (like 1100, 11000) are perfectly getting displyed in the report. But the Hier Nodes having the characters (like 1100A and 1100B) are not getting displayed into the Report and all the GLs under it are going into Unassigned node in the Reports.
Plz help me.
Regards,
Sandeep

Sandeep,
Your hierarchy is made up of characteristics with the values 1100, 11100A etc.
In your hierarchy is RSH1, does each node have the specific characteristic value Node 1
-1100
-11100A etc
Or is it a range i.e.
Node 1
1000 : 11100A
Regards
Gill

Values not getting displayed for members which doesnt have parents

Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......

Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

'@' not getting displayed in the ALV report

Hello,
I am facing a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
can anyone please help me in resolving the issue.
Thanks in advance.
Thanks and Regards,
Santhosh Guptha N.

@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay

Dynamic mandatory field error message is not getting displayed in webui

Hi,
In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
Can anybody tell where the problem is?
Thanks,
Hari.

Hi Hari,
Really sorry do not know how to convert this nug file to text
How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
Thanks,
Rajesh P

Portal Forms are not getting displayed in the new oracle environment.

Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
Tom

Hi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Did you check the Zoom setting?
Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

Default Value is not getting displayed in SUN ONE Ldap

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil Kumar

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

Barcode C128 is not getting displayed in Sapscript

HI,
I need to print the barcode in the Sapscript.
The barcode is not getting displayed even in the preview also, when I give the Barcode C128.
But when I give other Barcodes, it is getting displayed in the preview.
Can anyone let me know the solution to print the barcode for C128, as others are not that much fit to print.
Thanks
Rakesh

Hi Dieter,
No. I haven't.
Is this the reason for that?
let me know the procedure.
thanks
Rakesh

PIR & CIR is not getting displayed in APO product master

Hi guys,
I have created PIR and CIR in R/3 ,but it is not getting displayed in APO . Please guide me to resolving this what are the settings i have to check in the SAP system.
Thanks
S.Murali

I am Basis consultant.
Regarding RFC, logical system assinement, are the things are configured.
But still it is not active the integration between R/3 & APO server.
(Behalf of Murali )

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ApproveFormApp"/>
            <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION     ApproveFormApp
PACKAGE     sap.com/pa~asr~formstep

Hierarchy not getting displayed

Similar Messages

Maybe you are looking for