Hierarchy not visible in Employee Lookup

Hi,
I have configured the Employee Lookup Fiori application. In the application, reporting employee hierarchy is not getting loaded as mentioned in the below screen shot
I have done the troubleshooting of the application as per the below link
SAP Fiori LL11 - Consultants should know about OData troubleshooting
I got the below 404 not found error
'/sap/opu/odata/sap/HCM_EMPLOYEE_LOOKUP_SRV/EmployeeInfoSet('40000026')/$value Failed to load resource: the server responded with a status of 404 (Not Found)\'
Also I looked the /IWFND/GW_CLIENT and found the exception as attached in the screenshot
Also in the Application log I found the exception as mentioned in the screenshot
Please anyone suggest
Regards
Pallavi

Hi Pallavi,
This is due to missing OADP configuration in the standard delivery. The oData service calls up the internal OADP configuration to read the data views HCM_EMP_DETAILS (for employee info on top) and HCM_EMPNAME_POS for the reporting employees to read the field configuration.
These data views have the column groups defined but contains no columns (fields) and that is why the app is not displaying any field as there are no columns defined.
Please create entries in table V_TWPC_ACOL_C (or in OADP SPRO node, navigate to Assign Columns to Column Groups).
Hope this helps.
Jigar

Similar Messages

Hierarchy not visible in Query designer

Hello Experts.
I am trying to create a query in BW 3.5 but I ran into one issue. I created a hierarchy for an Infoobject. But I am not able see this Hierarchy for the Infoobject in BW 3.5 Query designer although I can see it in BI 7.0 Query designer.
Any help in this regards will be appreciated and points will be assigned.
Than

Check if you have made the "hierarchy" Active in your BW 3.5 query and also chosen the hierarchy correctly.
Right click on the characteristic----
> properties.
Hope this helps.

Hierarchy Not Visible

Hi all,
I am having problem with hierarchy in Q/A. We recently transported Profit center Infoobject to Q/A and loaded data. The load is successful, but I am not able to see the hierarchy in Hierarchy Maintenance. There are not entries in H table too. The master data load for Profit center is successful and there are entries for Profit center. Any help as to what is missing to view the hierarchy.
Thanks,
Ram.

Hi Bhanu,
Loads are taking place from the past 2 days and all master data loads (text, attr) are successful. Even Hierarchy loads are successful from the past 2 days, it shows total records added also (it shows n number of transfer records but says 0 records updated in the update area of Details tab of Monitor), but I am not able to see the hierarchy. Strangely in Dev also the scenario is same but I am able to see the hierarchy. Any idea if I am missing any configuration anywhere.
Thanks,
Ram.

Custom subtype not visible in ESS benefits

Hi Experts,
in erp2005, i created a custom subtype 9B for IT0021 (family members). defined a use case to maintain records through ESS personal information workset. so, a new button with name beneficiaries is seen on portal. however, these beneficiaries are not visible when employee wants to add them in the benefits plans as a beneficiary in certain plans. in the backend system, they are visible however. they can be added to a plan.
thanks for reading, i appreciate your help.

Kumarpal,
did you check this thread
https://forums.sdn.sap.com/click.jspa?searchID=17218337&messageID=6299502
Thanks
Bala Duvvuri

Hierarchy in properties of characteristics item is not visible in report

Hi,
It has been observed that the Hierarchy name in u201Cproperties of characteristics" of an infoobject for example 0GL_ACCOUNT is not visible in BEx output report. The report shows complete hierarchy with all nodes / subnodes but NOT HEADER description!
Also whenever you change the hierarchy (by changing global / local view), Same problem exist.
This is one of the high priority problem users are facing since they canu2019t see hierarchy name (Key / Text) causing confusion.
Please advice.
Thanks and best regards
Rajendra

Make a duplicate header above all the levels and show text in the BEx output
Level 1 -> Hierarchy name -> Level 2 ( Initially Level 1) -> Level 3 ( Initially Level 2)

Goods are not visible on the Web Shop main page (RUMP UP)

Hi colleagues.
Help please anybody :)
There was the problem with the goods in Web Shop.
Goods are not visible on the page Web Shop.
Below you can see actions performed by us and Prerequisites:
1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
3. Manually created root node in Product Catalogs table in MDM
4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
5. Fill another necessary fields in Product Catalog module in WCEM.
6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
Best regardn,
Andrey

Hi Denis
Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
But on the WebChannel web shop page this products are not visible.
I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
But this role does not exist in the system (SAP MDM, SAP NW).
Please give me advice about this.

Reporting Flag is not visible in the manage screen

Hi BI Experts, Good morning.
We load the inventory data daily in the night time which is delta load.
5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
From that day onwards its running successfully.
Yesterday i deleted the bad request from infocube.
But the Reporting flag is not visible.
Today i didnot get the records.
Please can anyone tell me the process.
Thanks in advance.
Regards
Anjali

Hi Nagesh,
Still i am not getting reporting flag.
I tried what did u say.
And today i did not get the records. Infopackages didnot run. It shows in red.
I tried to run it manually but it gives error.
The error message is:
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program 'SAPLRRMS' has to be
    terminated.
Please give me the reply.
Thanks in advance
Regards
Anjali

E-Recruiting - Internal Candidates not displayed in candidate search, job postings not visible for internal candidates in job search

Hi Friends,
We are on EREC standalone model. Initial data transfer between HR to EREC master data using PFAL is done.
All employees have got NA, CP, US, BP in HRP 1001 in EREC system.
Change pointers are also activated in HCM system, now current master data changes are also in reflecting in EREC system thro IDOC posting.
But when recruiter logs into portal and does a candidate search, no internal candidates are appearing ?
1) What needs to be done for internal candidates to visible during candidate search ?
2) Also while logged as internal candidate, released requisitions are not visible for internal candidates while they try to search for internal job postings ?
Kindly provide your inputs.
Regards,
ER.

Hi,
In SLG1, getting the below error messages for multiple times.
"Error while calling content extraction class CL_HRRCF_CEC_QUALI_WITH_PROFCY
The error occurred in program CL_HRRCF_SES_BUSOBJ_FROM_SPTYPCM001 line 96
Qualification 52000001 does not exist
The incorrect HR object has the key 01NA60000029 "
"The error occurred in program CL_HRRCF_ALE_EE_INBOUND"
Also please state how to differentiate internal and external candidate search pages.
Regards,
ER.

OWB11gR2: Mapping execution in a process flow not visible in OWB Browser

When a mapping is executed inside a process flow, execution details are not visible in OWB Repository Browser (Control Center reports) - rows processed, errors etc. Mapping row is missing in a log, like it never happened (but it did).
This auditing information is very important for monitoring reasons (to our customers also) and I just don't get it how this functionality is lost with this version. Another serious bug?

Hi David,
I was rather tired and frustrated last evening, so today I noticed some things I didn't yesterday. Your reply gave me a new motivation.
The conclusion is - a mapping execution in a process flow is logged, but the way activities are displayed in OWB Browser are now different than in previous versions. If I click on 'Execution Job Report' on a process flow, I see all the activities listed except mappings (transformations, assign, file exists, subprocess etc.). If I want to see mapping execution row, I must click on a plus (expand) sign.
This kind of behavior will make processes with a complex hierarchy (usually we have more than 5 levels of subprocesses) rather vast to monitor. In 10gR2, a drilling down was accomplished by opening a new browser tab (Execution Job Report link) for each subprocess/mapping activity. Now it shall remain on one huge screen (list) that keeps expanding.
But, if that is the new feature, we shall live with that. If our customers won't like it, they will have to get used to it.
Thank you for your reply!

Payload not visible in the XI monitor

In my scenario an xml message was successfully reaching its destination. The XI system was upgraded from support pack 13 to support pack 16. After that the process is still working fine as the XML message is still successfully reaching its destination. The issue we have is that the Payload is not visible in the last two steps of the monitor. We can see the Payload until Technical Routing in the monitor. But Call Adapter and Response steps do not have payload.
(TCode: SXMB_MONI)
when we double click a message we get XML message details and on the left hand side it shows following hierarchy:
XML Message:
Receiver Grouping
 - SOAP Header
 - SOAP Body
 - Payloads
Request Message Mapping
 - SOAP Header
 - SOAP Body
 - Payloads
Technical Routing
 - SOAP Header
 - SOAP Body
 - Payloads
Call Adapter
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Response
 - SOAP Header
 - SOAP Body
(( No Payload displayed, but present above!! ))
Any suggestions would be highly appreciated!
Thanks in advance.
Faiq

Hi faiq
This seems to be the normal behaviour starting with SP13 or 14. There was a discussion about this a while ago and I believe it turned out to be works as designed.
This is what was posted as final conclusion in Re: SXMB_MONI does not show payload after upgrade to SP15:
According to SAP (OSS) this is working as designed. Apparently it was an error in the past that the payload was stored in the DB on the ABAP (IE) side when the AE is involved, as it would then be stored twice at DB level. This explains why this is not a problem when e.g. the IDOC adapter is used.
Anyway, the only way to let the system show the payload in SXI_MONITOR is to set the runtime trace level to 3 (full trace) and parameter logging to 1 (trace switched on).
regards,
Peter

IT 580 : Screen Details not visible

While creating data in IT580 ( Previous Employment Tax Details).. The screen is not visible completely.
Only following feields are visible :
Pers. No.
Name
Category
Location
From & To date
Previous Employment Tax Details :
Leave Encahsment Exemption Amount
Gratuity Exemption
VRS Exemption
No. of LTA Exempt
LTA carried forward
The screen is blank other than than the above mentioned, no details are visible.
Could anyone resolve this query pls ???
Rgds.. Pushkaraj

Hello Pushkaraj,
Can u plz check if hiring date of the employee is begin date of the Financial year. If this is the case then only following fields will be applicable for the Previous Employment Tax Details :
1. Leave Encahsment Exemption Amount
2. Gratuity Exemption
3. VRS Exemption
4. No. of LTA Exempt
5. LTA carried forward
this is because only thess exemptions can be adjusted/ carried forward to the current year from the previous year. Other components like previous gross salary , PF, Ptax, Income tax etc are not applicable for the cross financial year adjustemnt in such a case.
U can test the same with a hiring date other than the begin date of the financial year. u will get the whole screen.
Check and let me know if still its nt clear.
Regards,
Praveen

Application WebDynpro ABAP is not visible in Google Chrome

Hi Experts,
After the Upgrade 7.3 EHP1 in Production System it is not visible the application developed in web dynpro ABAP, in the Employee Self-Service Portal.
In the QA and Development, applications WD ABAP are visible.
What can happen in the Production system?.
Thanks in advance.
Regards,
Briger

>
Please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "user995809".
You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
>
Hi, I've an item with label-
Heading: 
Font color is coming in IE but not in google chrome(19.0.1084.52 m). what should I do?
>
To start with, always post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.
Secondly the <tt>font</tt> element was deprecated 14 years ago and is now obsolete. Do not use it. Stop using any reference material that suggests using it.
<tt>rgb(51,102,153)</tt> is a CSS colour value, which the HTML specification does not require user agents to support for legacy <tt>colour</tt> attributes.
Use standards-based HTML and CSS:
Heading:

Items visible in PDF Preview not visible in Design View

Hello-
I used the auto create function to turn an existing PDF info a fill-in able PDF. Auto create "auto detects" form fields, including in some areas of the form that are not fields at all (blank areas, etc.). I go into Design View and remove any extra fields. However, I've discovered there are some fill-inable fields visible in PDF Preview and in the actual PDF itself (once saved) that are not visible at all in Design View- thus I can't click on them and delete them- they just aren't visible in that view. I've read the forums and it seems the opposite problem is more common, in which something shows in Design View but does not show in PDF Preview or in the final PDF.
Any guidance on what's going on? Next steps? I'm not a coder, so the simpler the better. Thanks to anyone with suggestions.

All the fields on your form are listed in the Hierarchy which is generally on the left-hand side of your screen. In there you should be able to go through each field and delete the ones you don't need.

Work items are not visible UWL task are visible in tracking in portal

HI
Friends
i am new from sap Ess/Mss implementation project...
i am facing an Problem " Work items are not visible under UWL in portal overview page"
but i am configured all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
Requestor send an Leave through portal send it successfully......but i am facing a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
i am configured and also registered UWL IN PORTAL..it is good..
in sap ecc i can assigned UWL_SERVICE user to roles
1.SAP_BC_BMT_WFM_UWL_ADMIN
2.SAP_BC_BMT_WFM_UWL_END_USER
3.SAP_BC_ADMIN_USER
4.SAP_BC_UWL_SERVICE
PLEASE HELP ME.
Tanks
Shaik Rafi

Hi All,
In such cases, please try to check as below :
1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
Revert if further help is needed with more info.
Reward points if found useful.
Regards,
Shri vidya S

In Explorer drop dowl list is not visible for Entities, Hierarchies, Collection

I am using SQL Server 2012 MDS on Windows 8.1 Pro. The drop down list of entities, Hierarchies, and collections is not visible on explorer screen. When I hover over the Entity menu the drop down seems to appear but hiding behind the rest of the screen.
Same issue with Hierarchy and Collections menu. To get to entities list I have to click on explorer menu and then the drop downs start showing up.

Hi Bhagunde,
Does the entities, Hierarchies and collections show correctly by using other browsers? Such as FireFox, Chorme and etc.
Elvis Long
TechNet Community Support

Hierarchy not visible in Employee Lookup

Similar Messages

Maybe you are looking for