Hierarchy not visible in Query designer

Hello Experts.
I am trying to create a query in BW 3.5 but I ran into one issue. I created a hierarchy for an Infoobject. But I am not able see this Hierarchy for the Infoobject in BW 3.5 Query designer although I can see it in BI 7.0 Query designer.
Any help in this regards will be appreciated and points will be assigned.
Than

Check if you have made the "hierarchy" Active in your BW 3.5 query and also chosen the hierarchy correctly.
Right click on the characteristic----
> properties.
Hope this helps.

Similar Messages

  • Attribute not visible in Query Designer

    hi BI Gurus,
    I could not see some InfoObjects(Attributes) which are marked Authorization Relevant, in the query designer. And the strange thing is, they are not visible even for the user with SAP_ALL and 0BI_ALL assigned. The authorizations for the  cube in which the main char is used looks fine.
    I have checked all the options in RSECADMIN, everything looks good.
    pls help me in finding the solution..
    thanks
    Cnu..

    check out with the info object screen in attribute tab, navigational attribute on/0f switch box, if u r using FF source system.
    check out with the infocube whether u r checked the check boxes in navigational attribute tab.
    regards
    harikrishna.N

  • Variable not visible in query designer

    Hello,
    I have 4 variables created for an InfoObject. But for one of my query written on Infoset, under that InfoObject in query designer it only shows me 2 variables.
    Any ideas what is causing the other 2 variables not to be visible?
    Thanks in advance,
    vamsi.

    which type of variables have you created?
    Regards,
    Chandra.

  • New key figures in multiprovider not visible in query designer

    Dear Experts,
    I added a cube and  keyfigures to the multiprovider definition.
    The multiprovider is activated successfully.
    The added keyfigures come only from this new cube.
    I  identified these new keyfigures to this new cube only.
    There is an existing query based on old version of the multiprovider without the new cube.
    When i relaunch query designer and re-open this query, i could not see the new keyfigures.
    When i create a new query, also its not showing the new keyfigures.
    Is there something not refreshed that I do not see these new key figures?
    Kindly advise. Thank you!
    Best regards
    Bass

    Hi,
    Some time it happens that newly added key figures and characteristics are not visible immediately in Bex query designer. Just check for warnings if any encountered while activating else try editing and re activating your Multiprovider and also proper field assignment.
    Newly added Key Figures should be visible in both New and Old queries without any differentiation. Just log off and log in back after some time, there is a good possibility that this inconsistency would be resolved.
    Regards
    Raj Rai

  • BC installed BEx Variables are not visible in Query Designer

    Hello,
    I have installed SAP Exit BEx Varibales from Business Content (0P_KEYDT, 0P_KEYD2 and 0P_KEYD3)
    sucessfully.
    But when I am not able to see these variables in the Query Desginer ( Need to restirct these on Net Due Date, Posting Date).
    Please advise me on this.
    Thanks,
    Geetha

    Are you sure you have the characteristics on which these variables are defined  y SAP are in your data target?
    Pl check this out. Alsso, sometimes, if you log out and get back, it may help.
    Ravi Thothadri

  • KeyFigure from MultiCube not visible in Query Designer

    Hello,
    I'm facing a strange issue. I added a new Key Figure to a MultiProvider. All identifications have been done and MP is active.
    However, when I try to create a new query on top of this MultiProvider or change an existing query , I cannot see the new KeyFigure in the list of Key Figures.
    Has anyone any idea how this can happen and what can be done to get this resolved?
    I haven't ........

    Just resolved it by simply doing a re-activation of the MP (even if it already was active ????).

  • Mapped characteristics in Multiprovider not available in Query Designer

    Hi,
    we have a multiprovider with approx 10 cubes and lot of characteristics, Navigational attributes mapped to it. I have added around 3 more characteristics and mapped to underlying cubes. But these added characteristics are not visible in Query designer.  Is there maximum limit for the number of characteristics.
    Thanks,

    Disconnecting the BEx made it work. But i dont understand i added this yesterday in the multiprovider. But i also removed some navigational attributes from the mapping. I will re-map and check. Thanks for the tip.

  • Hierarchy node not available in Query Designer

    Hello Gurus,
    I can find the hierarchy node variable in BW but it is not available in query designer. Does anyone know what might be the problem and a solution?
    Thanks,
    Mark

    Hi Mark,
    You said you "find the hierarchy node variable in BW but it is not available in query designer".
    How did you find the hierarchy node variable in BW? From backend SAPGUI, you will only be able to see the variable in some internal tables like RSZGLOBV. Did you mean this?
    For "it is not available in query designer", do you means that when you want to create a hierarchy node variable for this characteristic in Query Designer, you don't find this certain hierarchy node variable in the hierarchy node variable list?
    Important thing to notice is that, flat value variables and hierarchy node variables are listed separately. Did you make sure that you have chose to list hierarchy node variables in Query Designer?
    Regards,
    Patricia

  • Infoobject in infoset but not displaying in query designer

    Hi,
    I have created a query on infoset(ods1 & ods2).
    a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
    pls give your inputs,for why this infoobject is not available in query designer.
    Thanks
    Radika

    Hi Radika,
    I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
    Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
    Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
    Do this and see if it helps.
    Thanks & regards,
    Nikhil

  • Hiding hierarchy level in Report (Query Designer)

    Hallo Experts,
    I am working on a hierarchy structure. I use the activate Hierarchy Display in the Query Designer. I try to expand my query till level "2".
    But I actually want only the 2 level report and the 1st level should be hidden. Can anyone guide me how this can be done.
    Thanks in advance
    Santosh

    Hello Santosh,
    You can have Level 2 as an InfoObject that will be attached to 0MATERIAL as a navigational attribute. Then you can use this in your report and and create a condition on it.
    Thanks.
    With regards,
    Anand Kumar

  • Document Link Item Icon not visible at query execution

    Dear Colleagues!
    How can I acheive to have the comment-icon visible when I open a query with comments in BI Portal, as a default?
    I have set som settings for the properties of the Query in Query Designer. As it is now I have marked for Document Links, Master Data and Info Provider Data, under presentation of the query as a whole.
    Still, when I execute, I can not see any icons. But if I enter settings in the web, and mark for Document Settings for data, the icons appear.
    I do not want the customer to have to do this settings each time they ececute a query from the portal. Rather I want the Document Link Icon to be visible by default. How can I get my settings in the query designer to be counting in fromt of the settings in the template?
    Regards Silje

    I figured this one out myself. There is a setting in Web Application Designer, directly on the query in question. In properties for the query I tick of "Document Links Visible".
    Regards Silje

  • Control display level for "display as hierarchy" in BI 7 Query Designer ?

    Hi
    I'm using BI 7.0 query designer and I can see there's an additional difference between BI 3.5 and BI 7.0 in rows/columns behavior, in the "display as hierarchy" functionality.
    In BW 3.5 one could specify till what level the expand needed to be by default. So it could be 0 for totally collapsed. This is seems not possible anymore in BI 7.0 query designs anymore. Only on natural/technical hierarchies (cost center etc ...) this option is still there.
    Is there a way (javascript or other) to have the hierarchies created by "display as hierarchy" also fully collapsed by default ?
    Thanks.
    Geert

    HI, thanks for the reply.
    But this is not about the standard InfoObject 'hierarchy" tab, with all it's options on default expand levels etc.
    This is about a "pseudo structure" hierarchy which is defined at designtime (in Query Designer) and generated/shown at runtime (so bad for performance, I know). It's based on the real transaction data, not on a pre-created hierarchy as in normal hierarchies. It creates a tree view of otherwise unrelated InfoObjects, displays it in an collapsible/expandable tree shape.
    it's a bit hidden in version 7 Query Designer, compared to version 3.5. In 3.5 one had a larger set of options, including the -now lacking- default expand-to level. But in Version 7, most options are dropped. Probably due to the move from the ABAP to the java backend, lots of other stuff got culled in that move as well.
    For more info, look at the posts from Larry in this thread : [Display as Hierarchy|Display as Hierarchy]
    I know it's an option not used a lot but can be handy in certain cases.
    I really would like some help in getting a default query result with the "display as Hierarchy" collapsed.
    Thanks,
    Geert

  • Global CKFs not visible in query

    Hi,
    I created some Global CKFs for a query , but next time they are not visible under the Global CKFs column ,
    Any one has idea about it ?
    Thanks
    Gururaj

    Hi Dinesh ,
    Your concern is right . But for global CKFs should be available on left panel under Calculated Key Figures right? They are not even appearing there . But they are inside the system i checked them .
    This is happening only for one cube . I wonder if there is any setting at cube level to display these global CKFs in query designer ??
    Any idea?
    -Gururaj

  • Infoarea not appearing in Query designer

    Hi - I have some cubes created under cross application components infoarea but the infoarea is not appearing in the query designer. I have to create reports on these. how can I see them in query designer?
    Thanks,
    Raj.

    Hello,
    Please check your role. You do not have the authorization for that infoarea.
    Hope it helps,
    Regards,
    Meric

  • G/L Description not showing in Query designer for Characteristic values

    Hi Friends,
    We have developed a report and that we have made two New selections on the object 0GL_account....some GL Account number are grouped in that. While selecting the GL Accounts to new selection, it is showing GL Account number and Description. After that, the selected objects are not showing the Description in the query designer. It is showing GL Account number only for the both Technical name and  Description. I Would like to see Description of the GL Accounts in the Query designer. i have plan to delete certain account based on their dercription.
    And at the Infoobject description in the Business Explorer tab Display feild it is set as Text and Key. And till yesteday it shown the Description for the Account numbers. The daa loads are also .gone fine.
    Can you please guide me in this regards
    Thanks & Regards
    Anand

    Hi Thanks for your reply.
    The accounts which we selected are having Description  and it is showing while selection the selected GL Accounts.
    And the master data also is in active...When i try to activate the master data Agoin it is saying statement "Master data for characteristic 0GL_ACCOUNTactive"
    Any more suggetions..........
    Regards,
    Anand

Maybe you are looking for

  • IPad Movie Syncing problem --  Greyed out in "On This iPad"

    I have attempted to add "Home Video's" to my iPad.  They are MP4.  I am running the updated versions of ITunes and my Ipad.  I have been struggling with this problem for a while now.  When I check the Ipad, the "On This Ipad" shows the dotted cirlce

  • How to check opens PO's which are due for vendor payment

    Hi, Can anyone tell me where can I see the Open Documents which payment is not made from MM side. Is there any transaction to veiw all PO status which are open and which are closed. Thanks in advace. Raj

  • Zen touch from firmware 2.11.1.0 back to 1.1.3.0 or earl

    Hi,?Does anyone know how to revert back to firmware ..3.0 or earlier for the zen touch 20gb? I just installed 2...0 and I really dislike the sound quality. I know the website says this is not possible. Please tell me this is not true!?Thanks for your

  • Prints Garbled Text with HP845C

    My Garbled Text problem: My MacBook is back from Applecare after it went dead, and the internal hard disk was wiped clean by them as I requested, and in checking completed print jobs, I see that they did try printing a document or two after reformatt

  • Connect ArcGis 9 to Oracle 9i

    Hi, If it is necessary install ArcSde to connect ArcGis 9 to oracle spatial on an Oracle datatbase 9i vs. 9.2.0.4? If it is true that I need some libraries of ArcSDE to make possible this connection?. Please if someone can tell me what must i nedd to