Hierarchy on 0CUST_SALES is not activating.

Hi All,
I am trying to load flat file hierachy into 0CUST_SALES infoobject.Hierachy uploading correctly but its not activating.
I tried it manuvally still its not activating and running long time(More than 4 hours) .So i canceld the activation.
I also tried by creating hierachy manuvally with one node and activated manuvally . still i am seeing the same issue.
its not actiavting and activation process running long time . So i can canceld the job.
We are in BI 7. SP 20.
i tried to activate hierarchy in other infoobjects its working fine. I do not understand what could be the issue with 0cust_sales,.
please let me know what could be the issue?

Hi Sirisha,
If the 0CUST_SALES master data is used in aggregates, then the attribute change run and save hierarchy will take more time.
You can check the details of the ACR job in workbench. In RSA1 tocde, In menu select tools -> Apply Heirarchy / Attribute change and click on monitor tab.
If the Aggregates are inconsistent then need to clear and refill the aggregates, then the Heirarchy / Attribute change run will work fine.
Or run the program RSDDS_CHANGERUN_MONITOR in SE38 to see the details
Hope this helps
Regards
Koushik

Similar Messages

Hierarchy monitoring detected that the ConfigMgr SQL Server ports 1433,4022, are not active on Firewall exception

SMS_HIERARCHY_MANAGER reports (Message ID=3353):
"Hierarchy Monitoring detected that the ConfigMgr SQL Server <fqdn> ports 1433,4022, are not active on Firewall
exception."
This is a fresh SCCM 2012 environment with no firewall active. SQL is installed on the same server as SCCM 2012. Is there a way to fix this without enabling the firewall?

Check this out
Issue:
ConfigMgr logs the error even though Windows Firewall is disabled or it is enabled and all exceptions are added to SQL Server(s).
Environment: I had an environment consist of a two node SQL Cluster hosting ConfigMgr database and a separate ConfigMgr primary site server
Resolution:
Windows firewall service must be started on both SQL nodes and ConfigMgr itself . As soon as the service is started exceptions for TCP 1433 and 4022 must be added to SQL nodes firewall.
After that the firewall profiles can be disabled using:
netsh advf set allp state off
This is true but if you disable the firewall even thought you have opened the Firewall port then disabled the firewall. The status message will continue to be generated and your site server will still be in an error state.
Notice that I said "disabled" and not "turn off".
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

The expenditure organization is not active

Hi All-
I've got a strange issue importing timecards from our external system. Approximately fifty records have failed transaction import with an error message of 'The expenditure organization is not active.' The error message makes no sense because I've verified the following:
The expenditure org is active (no date restrictions)
The expenditure org is classified as both Project Expenditure/Event and Project Task Owning
The expenditure org exists in the hierarchy
I couldn't find any direct hits on Metalink, so I'm wondering if anybody might suggest other possible issues that I'm not seeing? Any other setups I should check?
Thanks in advance,
Joe

All --
It turns out that the employees were on LOA on the dates that they were charging time. So the message didn't really describe what the actual problem was. What happened is that the employees had gone on LOA and then returned to work, but HR had not yet returned them to active assignment. They entered their timecards as they normally had, but they did not pass validation because they weren't active on the dates they were trying to charge.
I would have looked at the assignment earlier in the process if the error message had been employee-oriented instead of referring to the org, but at least the problem is solved. Thanks for everybody's input!
Joe

The expenditure organization is not active for Expense Report

Greetings to all,
We ran into a problem, where a person submitted an expense report with project related information. The exp report gets an error in the workflow. When we look at the workflow error message is: This expense report failed payables validation.
When we look at the notification for error message, shows the expense report and for the line that has a problem, gives the following error message:
"The expenditure organization is not active."
We check the org in HRMS, we look up the org and has the following setups:
HRMS-->work structures--> organization (query the cost center)
then when looking at the cost center has the following:
under organization classifications:
Project Expenditure/Event Organization
Project Task Owning Organization
HR Organization
Then looking at hrms-->organization--->hierarchy
query for hierarchy-->we get our hierarchy,
then under organization-->query again for our main org, we see then the subordinates which we see the cost center again.
Everything looks good our point of view.
If have researched this issue on ML and have read the following notes: 423267.1, but this does not resolve our issue.
If someone has encountered this problem, can you share the additional steps to troubleshoot this issue.
Thanks in advance for any help on this matter.

All --
It turns out that the employees were on LOA on the dates that they were charging time. So the message didn't really describe what the actual problem was. What happened is that the employees had gone on LOA and then returned to work, but HR had not yet returned them to active assignment. They entered their timecards as they normally had, but they did not pass validation because they weren't active on the dates they were trying to charge.
I would have looked at the assignment earlier in the process if the error message had been employee-oriented instead of referring to the org, but at least the problem is solved. Thanks for everybody's input!
Joe

Hierarchies not activated

Hi
1. Attributes of 0costelemnt are not updated. These are mapped from hierachy ZCRK_HIER. Looks like hierarchy loaded but not activated. Subsequent load to attributes looks like it happened but did not pull updated attributes since the hierarchy was not activated. Please let me know why it is.
2. I checked in R/3 that Cost Element 50**** should have a Cost Element Type = Travel as per this update in SAP.
But it shows wages on BW report.
Please let me know for these two things
Regards
dyuthi

Thnx for the reply
But attributes of 0costelemnt are not updated. But when I check the hierarchy, hierarchy loaded but not activated. Two version are there A and M and I changed to A version. Subsequent load to attributes looks like it happened but the attributes are not updated because the hierarchy was not activated. i activated the hierarchy. So what I sould do next...
Regards
dyuthi

Creating a Process chain for hierarchy under 0Cust_Sales: Attrib? Text? too

Hi,
I have a standard hierarchy under 0Cust_Sales which I need to create a process chain for so that this hierarchy will be updated from R3 on a daily basis.
What is normal to do in this case:
Create a
1. Create a process chain to load the Hierarchy under this 0Cust_Sales?
Or,
2. Create a process chain to load the Hierarchy and the Attrib?
Or,
3. Create a process chain to load the Hierarchy, the Attrib and Text?
What is the pros and cons of each choice?
Thanks

Hi,
Sorry for the confusion...yes I mean attributes by master data.
Do you load with master data for 0cust_Sales separately, before loading the Attrib, Text and Hierarchy (in order)?
attribute text and hieracrhy are the master data for 0cust_sales.
You load attributes first and then text and then hierarchy.This is not a rule but for the better control and understanding.
But keep a seperate chain for each along with the same grouping like all the attributes load together in same chain and text load together and hierarchy load together in other chains.
Since attributes change frequently and you need to reload it everyday therefore keep it separate
Hierachy may give you tough time with failures in process chains and will not change frequently so keep it separately in another chain.
You need to use an attribte change run (change run) after any new master data is loaded.
this is done to reallign the new SID'S created for the new master data object with that of cubes where they are used and affect these changes in the aggregates which are built on them.
So better put it after the three chains have run or atleast after the master data chain has finished.
Thanks
Ajeet

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.

Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden

In Adobe Bridge when I try to open my camera raws, I get a pop up box stating "Bridges parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature" What do I do? Please advise

In Adobe Bridge, when I try to open my camera raws, I get a pop up stating"Bridges parent application is not active. Bridge requires that a qualifying product has been launced at least once to enable this feature." What the heck? I have a PC and haven't had problems before.. I have adobe cloud and pay my monthly bill...

Have you opened Photoshop or any other Adobe app that Bridge works with? You need to do this if you've upgraded PS or just signed up for CC.

Error: "Component is not active" but component is active

Hi Experts,
I transported a Web Dynpro application from source system to target system. When starting the application via browser I'm getting this error message:
"Component XXX_BDB is not active"
But the component is active in source and in target system. When I try to activate the component in target system there comes this error:
Component XXX_BDB can't be generated because of errors: see long text.
(Message no. SWDP_WB_TOOL100)
According to the long text, there is a heavy error and I should check the component in order to eliminate the errors. Checking the syntax is OK and strangely, the component controller is also active. But when I want to start WebDynpro-Component, the error message "Component is not active" is displayed.
I have checked this thread [Problems when activating ComponentController |Problems when activating ComponentController; without any effect....
Does someone have any ideas?
Thanks in advance,
Tan

Hi Thomas,
where can I check the generation load limit?
I've done an extended syntax check (in source system, is that okay or should I do the check on both systems?), there are some errors regarding strings, field properties and structure extensions and some warnings regarding field properties.
But this errors are on an other wd component as well, but this other component is running, so I'm not sure if these errors are crucial. However I'm going to fix the errors now.
Baskaran, I will check the component controller and component usage as well but how can I identify the errors or should I just check it in general?
And what about the fact that both applications are running on the source system?
Additional info: the source system is ECC 6.0, the target system is Solution Manager 7.0
Thanks
Edited by: Tan Yildiz on May 4, 2011 9:26 AM

Transfer structure not active

Hi ,
in my process chain , it failed due to error: Transfer structure is not active.
How to correc this?
iam using BI 7.0
regards
sidartha

Hi Siddartha,
Try to activate the transfer structure using Pogram RS_TRANSTRU_ACTIVATE_ALL in SE 38. Give the Infosource & Source system name there & then execute.
Hope this will help.
~!Dpak

Transfer structure not active after runing RS_TRANSTRU_ACTIVATE_ALL

Hi BW Experts,
we are having a migration and just after migration we are finding the the transfer structure is not active. Hence in order to activate the same we ran <b>RS_TRANSTRU_ACTIVATE_ALL</b> program but still in the job log finding some problems like <b>0BP_RELTYPES_TEXT</b> is not available in source system. Kindly help in this regard since this is a critical issue and we are not able to run our daily loads because of this.
Can any one also tell me if it is a migration problem?
Thanks and have a nice day.
Warm Regards,
Akilesh

Hi Sriram,
This is the First time ur loading data from that system, If yes u need to do full extraction steps like transfer data source in RSA5 ..etc.
After that u need to replicate those DS from their respective sources systems in BW.
After doing those all actions, then u need to run the program 'RS_TRANSTRU_ACTIVATE_ALL'.
If u have multiple TS to be activated from one source system ---> u can enter Source system name and put * in Info source column after executing the program, it will activate all transfer structures which are linked to that source system at a time.
Hope this will help...if you have any plz reply.
Thanks
Raja Reddy.

Material ledger is not active in valuation area C002

Dear All,
I have a Scheduling Agreement for a material 'A' with Vendor 'V' with diff prices with validity dates, I did the GR & when i am posting the invoice thro' miro, system is throwing error as above Material ledger is not active in valuation area C002 Why should I activate the material ledger here ? Pls suggest how can i solve this ?
regds,
Kallu

Hi
For a Particular material, Material Ledger is active or not? Can be checked in Accountig view of Material Master.
Why we need Material Ledger?
A fundamental task of the material ledger is carrying inventories in multiple currencies and/or
valuations.
Material inventory values are normally carried by the SAP system in one currency. The material
ledger component enables the R/3 System to carry inventory values in two additional
currencies/valuations. Therefore, all goods movements in the material ledger are performed in up
to 3 currencies or valuations. Currency amounts are translated into foreign currencies at
historical exchange rates directly at the time of posting. Businesses such as those in highinflation
countries can therefore carry their inventories in a more stable currency (such as US
dollars). This reveals inflationary effects on inventory values.
If you use transfer prices to represent value flows in your company in different
valuation views, you must use the material ledger. This allows you to carry your
inventories in three different valuations (legal valuation, valuation for reporting
purposes, and profit center valuation).
Before activating the material ledger, make sure you know which currencies and valuations
you want to use, because you cannot go back and change the setting.
Activating the material ledger is a prerequisite for using multiple valuations.
Thanks
Raman

Material ledger is not active in valuation area S001

Dear All,
I have created a Scheduling Agreement & did the GR. When I am doing invoice posting system is throwing error as Material ledger is not active in valuation area S001
What might be wrong here ? For same material if I create PO then everything is working fine. Problem is only with SA.
regds,
CB

Hi,
Please check your Material Ledger Activation setting for the Valuation AreaC002 in T-code OMX1. The Check box for the ML activation against the Valuation Area-S001 may be ticked. After activation/ticking this box, T-code CKMSTART was not executed to complete the ML activation. If you want the activation of Material Ledger, you have to run T-code CKMSTART to complete this ML activation or Otherwise uncheck this box. I hope this step will resolve your issue.
Regards
appalas

NOOK Simple Touch says "Error Dialog: user not activated" whenever I try to open e-books?

I have had my Nook Simple Touch for about a year now, and I have been using Adobe Digital Editions without a problem. Now, all of the sudden, Barnes and Noble updated my software and I can't read any of my ADE books!! It just says "Error Dialog: User not activated" every time I click on them. I have looked at many other websites and I have tried plugging my nook in to my computer and reauthorizing it, reauthorizing my computer, deleting the digital editions file and .adobe-digital-editions file, redownloading my books, turning my nook off and on, crying, and screaming. The weird thing is, in all the instructions, it says a pop-up box will come up when I delete the files, but it never does. Is that normal? I always have to do it manually by clicking on the gear. I even made sure I "unhid" all the hidden files. I HAVE DONE EACH OF THESE AT LEAST 5 TIMES AND THEY NEVER WORK!!! HELP ME, PLEASE.
Also, a lot of the websites say to make sure your Barnes and Noble ADE I.D. is the same as the one on your ADE computer I.D.. Is the B&N ADE I.D. different from just the Barnes and Noble ID? Becasue I have been using my sisters email for my computer ADE and my email for the B&N I.D.. Are they supposed to be the same? If so, how come I was able to use it without a problem before?? I tried reauthorizing ADE with my email, because I also have an ADE account with my email, but then it wouldn't let me redownload my books onto the new account. Does this mean I have to change the ADE computer I.D. and wait until my books are available again to read them? Is that the way to fix it? UGH!
Help is much appreciated.
P.S. I have ADE version 2.0

Just to clarify, there are two levels of Authorization -- one for the ADE software and one for the nook. You have to use your Adobe account to authorize both (and they have to be authorized with the same user name). It sounded like your original problem (Kcoline) was with the Nook authorization, and it was the same problem the rest of us were having.
To get your files back, I suggest carefully reading over the "Activation and Authorization" section of the ADE help. It appears that ADE will automatically find your files but note the "Note" in quoted text below...
http://www.adobe.com/products/digitaleditions/help/
"After activation, any books, magazines, or other documents you previously bought with Adobe Acrobat® or Reader® software are migrated to Adobe Digital Editions. This is usually a relatively quick process. Adobe Digital Editions opens each item and reverifies its license to the user. If you don't have DRM-protected items, you don't need to be online during the migration. If you have a large number of items (for example, more than 100), then this process may take a while, but you will see a progress bar indicating the state of the migration as it proceeds.
Note: Items that you previously borrowed from a public library with Adobe Acrobat® or Reader® software are not migrated to Adobe Digital Editions. You need to return the library item and then borrow the item again with Digital Editions."
If it's not finding your files, it may be because they're located in a folder different from the one that ADE is trying to use to find them.
You may also want to check the "Transferring items between computers" section, as this describes where the files should be located, and how to reimport them into your library.
Good luck!

Material is not activated error in MM

Hi,
We'vs installed SAP IDES in our Landscape recently. Whenever I tried to create a new material using MM01 transaction code, it creates. But then when I tried to view the same in MM03 or MM02 it throws an error of the following,
The material XXXXX does not exist or is not activated
Message no. M3305
I'm unable to diagonis the problem properly. Will appreciate your help.
Thanks,
Rajesh Manoharan

>
Kishore Kumar Chiluka wrote:
> Hi
>
> Please get in touch with your BASIS consulatant , as the updates are not performing rightly, this seems to be asystem error.
>
> Thanks & Regards
>
> Kishore
Thanks a lot Kishore.
But unfortunately we don't have any Basis Guy separately. I was doubling up as Basis as well APO in my org . I'm pretty new to all these stuff. I searched in help.sap.com about this a lot, but couldn't find anything useful.
Can you help me in identifying a solution to this problem?
Thanks,
Rajesh Manoharan

Hierarchy on 0CUST_SALES is not activating.

Similar Messages

Maybe you are looking for