Hierarchy transport from developement to Quality?

Dear SDN,
Hierarchy transport from developement to Quality.
I have created one balance sheet Hierarchy on 0Account infoobject.
Could you please tell me how to transport hierarchy from development to Quality.
Waiting for response.
Thanks & Regards,
Kiran

Hi Kiran,
Kiran Hierarchy data can be loade from source system, flat file or manually maintained in system.
since you have done manulally you can do the same in other systems also, but you need authrizations to maintain manually
I have manually created my balance sheet hierarchy using RSH1 transaction code.
you have do the same in quality also, since all required infoobjects are available in quality system, manulally create balance sheet hierarchy using RSH1 transaction code in Quality system.
check whether you have authorization to manually create in Quality system. you have to do the same procedure in production also i guess.
Regards
Daya Sagar

Similar Messages

Error during Transportation from development to quality

Hi All,
I am trying to transport some transformation from D system to Q system.But i am getting a error in one transformation
Error 1 :
Checking Transformation 0IMR96N4M29G9HJR6AIOQKB151I7CJI2
Rule (target: ZCUSTHS4M, group: 01 Standard Group): Syntax error in routine
Rule (target: ZCUSTHS5M, group: 01 Standard Group): Syntax error in routine
I have checked the transformation is active and there is no error in routine.I have collected all the DTPs etc.
Can anyone please support me in this.How to proceed in this case.
Thanks,
Deepak

Hi Deepak,
1. Check in routine if you are referring to any table or structure, which would have been present in the source system, but absent in the target system i.e Quality.
2. Open T code STMS in Qualtiy and check the transport logs for that particualr TR Number and try analysing the error.
3. Now the only option remaining is delete the Transformation in Dev and collect a deletion TR. Now move it to Quality this would delete the transformation in Quality. Create a new one in Dev and re transport.
Note: While moving the TR ensure that dependent object goes last .i.e the sequence of object import should be kept in mind.
Regards
Raj rai

Transport Table with Data from Development to Quality

Hi
Requirement:
Transporting Table with Values from Development to Quality System.
I have a Z* - table, appended one field at the end.
I need to transport data along with the table structure from Development System to Quality System.
In Development System, I have assigned the Transport request in Client 100(We can't add data to the table in this client).
What needs to be done to migrate the new table structure with Values.
Thanks in Advance
Regards,
Baburaj
NOTE: the requirement is to transport table and table entries through a transport request.
There should not be any manual update for the table in the target System (Quality System).

Check the delivery class assigned to the table. Please see the documentation
Delivery class
    The delivery class controls the transport of table data when installing
    or upgrading, in a client copy and when transporting between customer
    systems. The delivery class is also used in the extended table
    maintenance.
    There are the following delivery classes:
    o   A: Application table (master and transaction data).
    o   C: Customer table, data is maintained by the customer only.
    o   L: Table for storing temporary data.
    o   G: Customer table, SAP may insert new data records, but may not
        overwrite or delete existing data records. The customer namespace
        must be defined in table TRESC. (Use Report RDDKOR54 here).
    o   E: System table with its own namespaces for customer entries. The
customer namespace must be defined in table TRESC. (Use Report
RDDKOR54 here.)
S: System table, data changes have the same status as program
changes.
W: System table (e.g. table of the development environment) whose
data is transported with its own transport objects (e.g. R3TR PROG,
R3TR TABL, etc.).
or during client copy
the data of client-specific tables is copied.
Classes C, G, E, S: The data records of the table are copied to the
target client.
Classes W, L: The data records of the table are not copied to the
target client.
Class A: Data records are only copied to the target client if
explicitly requested (parameter option). Normally it does not make
sense to transport such data, but is supported to permit you to copy
an entire client environment.
or during installation, upgrade and language import
behavior differs here for client-specific and cross-client tables.
nt-specific tables
Classes A and C: Data is only imported into client 000. Existing
data records are overwritten.
Classes E, S and W: Data is imported into all clients. Existing data
records are overwritten.
Class G: Existing data records are overwritten in client 000. In all
other clients, new data records are inserted, but existing data
records are not overwritten.
Class L: No data is imported.
Cross-client tables
o   Classes A, L and C: No data is imported.
o   Classes E, S, and W: Data is imported. Exisitng data records with
     the same key are overwritten.
o   Classe G: Data records that do not exist are inserted, but existing
     data records are not overwritten.
ehavior during transport between customer systems
Data records of tables of delivery class L are not imported into the
target system. Data records of tables of delivery classes A, C, E, G, S
and W are imported into the target system (this is done for the target
client specified in the transport for client-specific tables).
se of the delivery class in the extended table maintenance
The delivery class is also analyzed in the extended table maintenance
(SM30). The maintenance interface generated for a table makes the
following checks:
o   You cannot transport the entered data with the transport link of the
    generated maintenance interface for tables of delivery classes W and
    L.
o   When you enter data, there is a check if this data violates the
    namespace defined for the table in table TRESC. If the data violates
    the namespace, the input is rejected.
Thanks,

Transporting ODS from Developement to Quality server

Hi,
In Quality server I am haveing ODS with out one navigational attribute included in it but it contains data.same is avaliable in development with navigation attribute object included in it.Now we want to transport this ODS from development to Quality.Kindly let us know if we need to delete the data from ODS in quality before moving this ods which is in the delevopment.Technical name for both ods is same.
Regards,

Hi,
You don't have to delete the data. The transport will work fine. But, the more data you have, the longer the transport will take.
Cheers,
Kedar

Transporting Report from Development to Quality

Hi,
1. I need to transport Report & Custom Data Source from Development to Quality System. Please help me about procedure & prerequisites .
2. When I search a report from Business Analytics--> Design Reports . I need Hide some reports. Do we have any such possibility ?
Regards,
Rohit

Rohit,
As Eduardo said there is a possibility to Assigned to a Work center a way to make Reports visible to users. But from 1405 we can control the Visibility of Reports as per business role as well.
Please follow steps below to make this feature available:
1) Go to "Administrative Analytics Settings" configuration element.
2) Check the check box of " Allow the assignment of Business Roles "
This will show one more Business role Tab when you are trying to assign the reports.
Please see image for details.

Transporting an Object from Development to quality and then to Production

Hello SAP Friends
I want to know the step by step navigation for Transporting an Object from Development to Quality and from there to production..
Please give some detailed Navigation...

Hi Kiran,
use transport connection to collect the objects to request, rsa1->transprot connection.
use infocube as starting point to collect objects, left side choose 'object type', middle frame choose 'infocube' expand 'select objects', locate/search your infocube' and 'transfer', it will go to right side.
in right up, there are buttons, click 'mode' and choose manual, and grouping 'only necessary objects', and execute, this will collect infocube and required objects like infoobjects, infoarea, etc.
after that change grouping 'in dataflow before' and execute, this will collect update rules, ods, infosource, transfer rules, datasource assigned etc.
remember to assign source system, click yellow box with X icon and mark the source system.
after that use grouping 'in dataflow afterwards' to collect query, web template, role etc.
take a look transport docs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Re: Transport Organizer---
transport query (bex objects)
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
hope this helps.
(Courtesy AHP from Re: transport)
Bye
Dinesh

Transport the created Storage Bin Automatic from develop to quality LS10

Hello,
My customer has created a new entry in LS10 u2013 Create Storage Bin Automatically in the development system with a transport order.
He forgot to do Environment u2013 Create bins. I did it with my user in the development system and SAP has created the bins automatically (the system creates and launch a batch-input). The system did not ask me for a transport order (I think because this created data is master data).
The user has transported the transport order from development to quality system but the Storage Bins are not in QAS. I told to the user that the Storage Bin are master data and we has to do Environment u2013 Create bins in each new environment but LS10 transaction has status 'not modifiable' in quality and production system.
There is a way to transport the created Storage Bin Automatically from development to quality and production? Now the user is asking me to have the Storage Bins in quality and production with access LS10 in status 'not modifiable'.
Cheers,
Marta

I could not transport them but I have created the storage bin directly in QAS with LS05 because LS10 is not available.
Thank you very much.

Transport of Object from development to quality server

Hi Experts,
I want to know in detail with transaction codes how to transport from development server to quality server. how to transport mappings. Thanks in advance.
Regards,
nagaraju tankala

Hi,
XI supports two kind of Transporting the objects
1. CMS tranport
2. File Transport
CMS Transport
CMS for SAP Exchange Infrastructure
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Configuration of CMS in Central NWDI & SLD to transport XI objects
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
How to Use CMS in XI 3.0.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
CMS based transport in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Change and Transport Lists for CMS Transports
How ToTransport XI Content Using CMS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
File Transport
There is not much to do if you're using file transport
IR you just export (from the menu) and import the same way in the target IR
ID you just have to specify transport targets
(so names of your business systems will change)
Configuring Groups and Transport Targets.
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
also have a look at:
Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/content.htm
if you're having one SLD if not then you should also copy sld so that all sld's data will be consistent
Thanks
Swarup

If I trasport a object from Development to Quality

Dear One's,
I have query, If I trasport a R/3 source system object in BW from Development to Quality and then to Production. How this will reflects in Dev., Qty & Prod. of R/3 source systems?
Thanks in advance,
Raj

Hi Rajasekhar,
when you are talking of the source system dependent objects it should be a datasource.
Data Source should be transported first in r3 and then in transports starts in BW.
When you are talking about BW transports which are not dependent on souce system there is no need to collect the source system while transporting.
When the object is transported to Quality or from quality to production the source system mapping should be accordingly changed to R3 quality and R3 production.
For this to haapen you should maintain an assignment in Rsa1.
go to rsa1> tools> conversion of logical system names.
go to new entries--> enter your r3 development server logical system name and in next column enter r3 quality system logical name.
Save the assignment.
Hope this is helps.
Please correct me if Iam wrong.
Regards
Mahesh

Web Template Changes not visible after transport from Development to Test

Weu2019ve run into a problem doing web development in BI 7.0 that I suspect someone has seen before and may quickly be able to point us in the correct direction. Changes that are made to web templates in the Web Application Designer are correctly transported from development to the test environment, but we are still seeing the old version of the template when the report is executed. We are able to see the web template changes in the Web Application Designer in the test environment. We believe this is a caching issue and have cleared the query cache and the HTTP cache in SMICM. Unfortunately, this has not resolved the issue. Can you suggest another approach to resolve this issue?

Not sure what you mean by browser cache. We have deleted history, cookies, and all temporary Internet files. The issue isn't limited to a single user, but exists for all users. Through extensive testing we have established that you are able to see the web template changes in test in the WAD(Web Application Designer) after they have been transported from development, but can only view the changes when the web template is run for the first time. Changes to existing templates can be seen in the WAD in test, but are not seen when the report is run. The old version of the template appears to held in cache somewhere, but we haven't been able to find it and clear it.

Can Attribute lists be transported from development to QA system?

Hi,
We want to test the attribute lists with some data, Can Attribute lists be transported from development to QA system?
Regards
Monica

Hello Monica
How are you doing?
Can you help me out how i can transport the Attribute List which i have created in DEV with BI query. Hope you have resolved this by now. Could you help me out
regards
shankar

Transporting Change document Object from development to quality

Hi All,
I have created a change document object from SCDO for my custom table. Now I want to transport this object from development server to quality server.
As while creating Objects some enteries are made into standard table CDHDR and CDPOS which is client dependant so how to work this object on another client.
Do I need to create seperate objects on quality server and then on production server?
Thanks

Hi Kiran,
use transport connection to collect the objects to request, rsa1->transprot connection.
use infocube as starting point to collect objects, left side choose 'object type', middle frame choose 'infocube' expand 'select objects', locate/search your infocube' and 'transfer', it will go to right side.
in right up, there are buttons, click 'mode' and choose manual, and grouping 'only necessary objects', and execute, this will collect infocube and required objects like infoobjects, infoarea, etc.
after that change grouping 'in dataflow before' and execute, this will collect update rules, ods, infosource, transfer rules, datasource assigned etc.
remember to assign source system, click yellow box with X icon and mark the source system.
after that use grouping 'in dataflow afterwards' to collect query, web template, role etc.
take a look transport docs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Re: Transport Organizer---
transport query (bex objects)
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
hope this helps.
(Courtesy AHP from Re: transport)
Bye
Dinesh

Transport Connection Steps from Develop to Quality?

Hi Friends,
Could you please let me know the steps for transporting the developed Infoobjects from Development server to Quality Server?
1) I am working in Production support project environment.
2) I have created two Infoobjects (Captured in new request) and added those Infoobjects in the ODS and Cube and executed the report and i am able to see those fields in report in dev system with data.
Now please let me know the detail steps to collect the transport in proper sequence and to release it in proper sequence.
Thanks
Nithi.

Hi Nithi,
Generally transports are done in the following order:
1. Application Component
2. Info Area
3. Info-object Catalog
4. Info-objects that were created/activated by you.
5. Tranfer rules
6. Transfer structure
7. Communication Structure
8. Infosource
9. Cube, ODS, Multiprovider
10. Update rules
And imported in the same way.
Nick.

Transporting Objects from Development to Quality

Hello Friends,
I am working on a project where I have created Cubes, InfoObjects, DTP, Transformations and Open Hub Destinations in a Development Client.
Now It's time to transport all these objects in to Q-Client.
Can any one let me know the steps to do so? This is really very urgent.
Your help is greatly appriciated.
Thanks in advance,
Kavita

Hi
Before transporting your complete data model
Transport all the required info objects and its attributes First.(If you do not tranport the info objects first then when you transport the infosource the import will be failed saying that inactive info objcts found)
Then replicate the required datasources in the target system. (If you do not replicate before transporting the request into the target system then it will give an error log saying that Fields does not exist in the dataosurce XXXX)
So do the above two steps first and then proceed
Then you can collect all the objects , Cube , Infosource, ODS, Open hub etc and transport it.
You can transport from SE01 or SE09
Go to SE01
Select Modiafiable and display.
Release the task of the corresponding request first and then the Request
Go to STMS and then select your target system and import the transport request.
Regards
M.A
Edited by: M.A on Jun 19, 2008 10:05 PM

How Transport Screen 0111 of User Exit MM06E005 from Development to Quality

Hi Gurus,
Greetings!!!
I have implement a Screen Exit MM06E005 for my PO Requirement (ME21N, ME22N, ME23N).
I am able to see the added screen details in my Development Client
However, after transporting the request to Quality, I am unable to see the screen.
When I check in Quality I got the details as 'the screen does not exist in quality'.
In development Server I checked that the screen is in Package ME and not in my Transport request.
Please let me know how to transport this screen(0111) to the Quality Server.
Thanks in Advance.
Regards,
Renwa.

Hi Denny,
You please check this below things.
1) Check the screen is activated or not
2) May be you activated the screen and placed in different transport request
3) Deactivate all and keep then in another transport request and transport.
Regards,
Madhu.

Hierarchy transport from developement to Quality?

Similar Messages

Maybe you are looking for