Hierarchy Variable creation - OK option greyed out at the last step

Hi Folks,
Last year we have upgraded to BW 7.31.
i was trying to create a hierarchy variable for one of the char info objects to select user choice hierachy at the variable prompt.
At Final step of the, I was not able to select the OK to complete my devlopment and use the hierarchy.
Please find the screen shot attached . am i required to creata version variables also .
regards
Virat

Hi Virat,
Please apply SAP GUI for Windows 7.30 with latest Patch Level and
BI 7.0 ADDON FOR SAP GUI 7.30 with latest Patch Level and check
whether it helps you.
Also, please refer the following SAP Note:
147519 - Maintenance strategy / deadlines for SAP GUI
Also, can you please enter the value for Hierarchy Version (present under Select Hierarchy Version)
seen in the screenshot which you attached here and check whether it helps you.
Thanks & Regards,
Sapna

Similar Messages

Options greyed out in the main Garage Band toolbar tab

I hadn't noticed that earlier but when I clicked it I saw this!!! (look at the pic)
I have had a serious issue with Garage Band recently: it opens with a considerable delay (up to several minutes) and isn't showing up in Mission Control regardless of how many other apps are opened at the same moment. I have earlier version of GarageBand and these options look normal. When troubleshooting some other issues (not this one!) I trashed some plists as recommended in an Apple Support article on iLife troubleshooting.
Help me, please: what should I do to fix this and return the ability to use these options?

But why it even wasn't possible to view the version? I thought it was a must-have option that should work any time.
That is because GarageBand is showing a dialog panel and waiting for a selection. The main application window is not active but the "New Project" panel. Then most of the options in the "garageBand menu are inactive", until the panel has been dismissed.
I am seeing this (in English, sorry): The GarageBand application menu is inactive:
In the main window, once the project has been created, all is active again:
That is very typical for all dialog panels in most applications. as long as a dialog is active, the main application menu is aimed for most options, for example in iPhoto:
But you can easily find the version number of an application, by looking at it in the Finder in column view:
Or use "File > Get Info" on he application.

Why is my WIFI option greyed out!? 4S

Last week I had my iPhone 4S replaced because my wifi option greyed out and the battery life started to drain really fast. 8 days later it's the exact same problem. What's happening here? I bought the phone 11 months ago!!! Up to date software, reset network settings. I have spoke with several other people with the same problem. I expected more from an expensive apple product...
Please help me Apple! Thanks

Your replacement should have a minimum of a 90 day warranty, if replaced by Apple.
If you've followed all of the steps in the troubleshooting article, and your replacement device is still having wi-fi greyed out, then get the device replaced.

Select option greyed out for fields of custom DataSource (rso2, rsa6)

Hi
Why are several fields, in my custom DataSource (created in rso2) not available for select?
I do not think this is a permission issue, since several fields are selectable, but not all fields.
It is not the data type, since I see other custom DataSources that have the same data type, and it is selectable as a select option.
This is not a DataSource that was provided by SAP, it is completely custom, and uses a custom data definition (defined as a structure via se11), and a custom function.
I have read the responses to similar questions, but have not found an answer that explains how to make the field selectable for select.
What determines which fields can be selected for selection, and which fields have this option greyed out (not selectable)?
I have come across multiple answers, for similar questions, that suggest an abap program to directly update table roosfield.
Is this safe?
IF I choose this route will I need to run the update program on production, or will the change it makes to my dataSource transport with my transport?
(I can test this).
What I most need to know is If this suggestion is safe, or if it has side effects?
Thank you

Hi Eileen,
In Least case to enable the selection for the fields with the below program:
Below code is for your reference which will use to unhide objects in RSO2 or RSA6 for Data source( in code for BELNR, KUNNR, VBELN, BUDAT fields are unhiding for 0fi_ar_4 data source selection option) . Still need any clarifications let me know.
SE38: Create a program for ref below code.
REPORT ZNP_SELE_DS.
tables: ROOSFIELD.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'BELNR'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'KUNNR'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'VBELN'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'BUDAT'.
Thanks & Regards,
Srinu.Rapolu

When OpenGL stopped working (option greyed out)

I discovered a weird bug in Photoshop 12.1 x64 with nVidia graphic cards and what´s causing it:
Problem (on all off my PCs): OpenGL support in prefs / performance is greyed out, no shadow below open documents visible ( == OpenGL not working). After deleting prefs.psp and restarting (as the www says), OpenGL support was working again, on next restart: no support - option greyed out again.
Solution: if deleting the prefs file or the whole prefs folder don´t work, check if you have a custom workspace with the brush floating panel open.
If so, close it and remvoe it from workspace, restart PS and.... OpenGL support is working again!
I could reproduce this bug on all of my PCs, no matter what type of GFXcard and driver version is installed.
Maybe that bug occurs only with Win7 x64, PS 12.1 x64 and nVidia cards, but removing the brush panel solved it on every machine!!
I´ve opened a support ticket and provided Adobe with screenshots of the working and not-working states... maybe they can fix this with an update!
This are my system specs for the tested machines:
workstation 1:
Intel i7 980X HexaCore (with SMT)
ASUSP6T7 WS Supercomputer
6 x 4GB DDR3 triple channel
nVidia Quadro CX
3x WD SATAII HDDs
dual monitor
Wacom Intuos4 XL
3Dconnexion SpaceExplorer
contour Shuttle Pro2
workstation 2:
Intel i7 975 Extreme Quadcore (with SMT)
ASUS P6T Deluxe V2
6 x 2 GB DDR3 triple channel
nVidia GTX 580
2x WD SATA HDD
both systems running on:
Windows 7 x64
Mastercollection CS5.5
latest updates for OS, CS5.5 and GFX drivers...
Maybe this threat helps .... ;-)

I did heavy testing the last days including systems at my home and at a friends office.
In fact, I can´t tell, what´s causing this, but it seems to depent on a certain type of installation. But first the tested systems:
nVidia GTX480 SLI, Win 7 x64, CS5.5 - working
nVidia GTX580 Win7, CS5 - working
ATI HD4870x2, Win7 x64, CS5 - working
nVidia GTX580, Win 7 x64, CS5.5 (update from CS4 ->CS5 -> CS5.5) - not working
nVidia GT240M, Win7 x64, CS5.5 - working
ATI X1900XT - XP SP3 x64, CS5 - working
nVidia QuadroCX, Win 7 x64, CS5.5 (update from CS4 ->CS5 -> CS5.5) - not working
ATI HD4390, XP x64 SP3, CS5.5 (update from CS4 ->CS5 -> CS5.5) - not working
nVidia GTX480, Win 7 x64, CS5.5 - working
On each system I installed the latest driver & updates, rebooted it and followed the same procedure:
1 - removed (==renamed) prefs folder
2 - start PS
3 - open prefs / performace
4 - config OpenGL for "Advanced"
5 - closing prefs and restarting PS
6 - checking OpenGL when active: pt7
7 - Open menu "Window" and and select "Brush" (or press F5)
8 - docking Brush-panel from original position to the tools-panel on the left
9 - saving workspace as "BrushTest"
10 - restarting PS
11 checking OpenGL
Since you have all older Versions still installed when you update i.e from CS4 to CS5 I tried this with every installed version.
On my two office WS I have CS4, 5 and 5.5.
After trying this with the GTX580 with this results: CS4 working, CS5 working, CS5.5 not working - I today started PS 12.1 for working and saw that tiny shadow below the document - WITH the brush panel open!!
Checked it and now its working proper. I have no clue what has changed over night but it did it...
My primary WS with the Quadro card still refuses to actived OpenGL with the opend brush-panel, no matter what I try.... maybe I gonna deinstall that CS4 to 5.5 mess and get me another license for the full CS5.5 instead of the update from the update...

No Sound; All options greyed out

Output options for sound are greyed in Preferences and the desktop sound icon. In the Audio MIDI Setup window, the default output says Built-in Output and the System Output also says Built-in Output. No other options available for either.
Just below halfway down there is Audio Input, which has a bunch of info on the left, but on the right where it says Audio Output, there is just a greyed out message that says Output is Not Supported.
I also tried the option/apple/p/r, got the three chimes, but sound is still greyed out.
Any gurus out there who can tell me what simple thing I did to cause this, or is it a hardware/sofware bug?
Macbook Pro Core Duo 2 Mac OS X (10.4.8) 2 gig SDRAM 2.33 GHZ Core Duo 2

it doesn't matter if you've used the ports or not.. there is a sensor inside the audio ports that will automatically switch your audio in and/or out into digital mode if it trips and then 'thinks' there's a digital cable connected. basically, if you open your sound control panel and display the output pane and it says 'digital out', and the volume control (and everything else) is greyed out, and it says something about this device not having volume control... then this is exactly the situation where the port sensor has clicked on to digital and is staying there. unfortunately, the sensor seems to be quite fragile and there are plenty of users that are suddenly wondering why they have no sound, and why the sound ouput only says digital and the options are greyed out. it would be at least a comfort to be able to say that this only can happen if you've been plugging things into the port (such as headphones), but I've heard of this happening to people regardless.
anyway, look for the signs I mentioned: the digital output option being the only available choice in the sound control panel, with options greyed out. and also a red light coming out of the port. if this is happening to you, then you need to get the machine fixed cos that sensor is jammed.

Open iTunes option greyed out - why?

Hello - I am wondering why, when connecting my ipad to my mac, it opens up in iPhoto, and why the open iTunes option is greyed out on the summary page. Any ways to change this? Thanks!

You can do this while the iPad is connected to the Mac.
Launch iTunes on the Mac and from the menu at the top go to iTunes>Preferences>Devices and see if the box at the bottom - prevent iPods, iPhones .... from syncing automatically is checked. If it is checked - uncheck it. Then go to the Summary Tab and you should be able to check - Open iTunes when this iPad is connected.
I think this may be something that you can try as well. Go to System Preferences on your Mac and click on Accounts. Open your user account - you will need the administrator password - go to Login Items and make sure that iTunes Helper is checked.
For the iPhoto issue - launch iPhoto and from the menu - iPhotos>Preferences>General>Connecting Camera Opens no application.

My wifi option greyed out and when i checked out wifi adress it shows N/A . how would i solve this ?

my wifi option greyed out and when i checked out wifi adress it shows N/A . how would i solve this ?

http://support.apple.com/kb/TS1559

How to create new playlist. File option greyed out

The create playlist option is greyed out in the File menu. How do I create I new playlist? What is wrong with the new version?

Hi;
How to create new alertlog file. Does it require the DB bounce?Oracle will automatically create a new alert log file whenever the old one is deleted and you dont need to bounce db
For details see:
http://orafaq.com/wiki/Alert.log
Regard
Helios

Acrobat X Pro Form Edit option greyed out

Acrobat X Professional running on Win7 32bit.
We are converting a word document into PDF with Acrobat, however after the file is converted the option to Edit Form is greyed out.
The same word document can be converted on other PCs with Adobe X Pro, where the Form Editing tools are available to use.

Do you see other Editing options like Distribute Forms, create etc? Are they all greyed out?
If that is the case- Look for Form (AcroForm.api) under Help->Adobe Acrobat Plug-ins. Is that available?
Check the conversion settings under Preferences-> Convert to PDF-> Select MS word from the list. Look if there is any security set.
SaVe.

Internet Options greyed out in Internet Explorer 9 because of GPO settings in Windows 2008 AD

Internet Options greyed out in Internet Explorer 9 because of GPO settings in Windows 2008 AD.
I am trying to find out what GPO setting is causing this so I can change I.E. settings at a desktop running Windows 7.
A GPO has I.E. locked down so settings are greyed out for Intranet settings so I can't change Intranet settings.
How do I enable so I can save changes with a GPO?

Classic GPO using Administrative Templates, is designed to do exactly that (disable the UI).
Previously, you could use IEM in preference mode.
Now, you'll need to use GPP, but there are a couple of limitations.
Check the IE10 IEAK documentation (it's useful for understanding what you can do with GPP)
http://technet.microsoft.com/en-us/library/jj890998.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Can't update Adobe programs. Update option greyed out, DL'd update fails. Win7, PScs6, AIcs5, FLcs6?

None of my Adobe programs give me the option to update. The option is greyed out under the Help menu. It fails when trying to update through Bridge. When I download the update through a browser and try to update that way, I get the message:
I have admin priveleges and I'm running it as administrator. This is on Windows 7 Enterprise, 64 bit. Photoshop CS6, Flash CS6, Illustrator CS5.
Any help is appreciated.

Hi Jon,
It seems like you have created a Package using AAMEE. Could you please try creating an update package again using AAMEE for all the softwares and then try using them on the machine.
If you need assistance please refer to the Enterprise Deployment guide.(http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html)
It should work.
Regards,
Abhijit

Server 4.0 can't edit users and groups. All options greyed out.

I have upgraded the mac mini server from Mavericks to Yosemite and had to update to Server 4.0 and having many issues.
One issue is I can't edit users and groups. All the options are greyed out.

Search the System keychain on the server for application passwords with the name "/LDAPv3/127.0.0.1" and delete any you find. Sign out of the Server app and sign back in using the FQDN of the server, not "localhost" or "127.0.0.1".
Credit for this observation to ASC member Peter Jurg2. See also this discussion.

All 3D options greyed out in CC

I'm not sure why all 3D options greyed out in my Photoshop. I can use the 3D options last month.
I am using the Intel HD 4600 integrated graphics.
System Info
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:12, Stepping:3 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 3400 MHz
Built-in memory: 7878 MB
Free memory: 5529 MB
Memory available to Photoshop: 6866 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
The GPU Sniffer crashed on 7/12/2014 at 8:46:54 AM
Display: 1
Display Bounds: top=0, left=0, bottom=900, right=1440
OpenGL Drawing: Disabled.
OpenGL Allow Old GPUs: Not Detected.
No GPU information available

aqlisk wrote:
System Info
The GPU Sniffer crashed on 7/12/2014 at 8:46:54 AM
No GPU information available
Make sure your Intel HD device driver is good Photoshop is having problems when it tries to get information about your graphic GPU

MPB Rendering option greyed out - Win7 k5000

System: Win 7/64; CPU E5-2690 X 2; 64Gb RAM; PP CS6 6.0.5; Quadro K5000 GPU.
Project - Project Settings - General - rendering option greyed out. I've carefully seached the forums, tried various suggestions, but still cannot get to select the drop down box.
Can anyone help?
Thanks
Les

Andrew, thanks very much.
Yes - you were correct; while I checked the cuda support txt file, I 'assumed' that 'quadro 5000' would be correct. I edited the file, saved it back to its location, and now have the drop down option working.
Really appreciate,
Regards
Les

Hierarchy Variable creation - OK option greyed out at the last step

Similar Messages

Maybe you are looking for