Hierarchy variable inpu help not displayed correctly in the portal

Hi ,
I have a problem when trying to select Hierarchy in the variable selection screen hierarchy is not being displayed
correctly in the portal/browser . When running the same report in BEX Analyser and in RSRT with HTML option the
hierarchy displays correctly in the variable selection screen .
In Portal Var selection screen Hierarchy is displayed side by side ie horizontally not level by level.
Please help.

Thanks Venkat, Problem is solved with the note u mentined

Similar Messages

Leave not displaying correctly on the Portal.

Hi,
The leave displayed in IT 2006 and PT50 are more than what is displayed on the Portal.

Hi
pls check if your portal is pointing to the correct backed system, also check if you refresh the ivew does it change.
Regards
sameer

BKI0008E: The environment variable BI_CALLER is not set correctely. The cur

Hi All,
I have configured backint for backup of maxdb for content server 640. I configured it as per the documents available, created the configuration fiale and the parameter file. Created the backup medium in dbmgui.
Now when i try to run the backup using the pipe am getting the above mentioned error.
Please find below the dbm.ebp log for the same...
more dbm.ebp
2009-10-22 02:06:08
Setting environment variable 'TEMP' for the directory for temporary files and pi
pes to default ''.
Setting environment variable 'TMP' for the directory for temporary files and pip
es to default ''.
Using connection to Backint for MaxDB Interface.
2009-10-22 02:06:08
Checking existence and configuration of Backint for MaxDB.
    Using configuration variable 'BSI_ENV' = '/sapdb/CFC/lcbackup/apoatlas.env'
as path of the configuration file of Backint for MaxDB.
    Setting environment variable 'BSI_ENV' for the path of the configuration fil
e of Backint for MaxDB to configuration value '/sapdb/CFC/lcbackup/apoatlas.env'
    Reading the Backint for MaxDB configuration file '/sapdb/CFC/lcbackup/apoatl
as.env'.
        Found keyword 'BACKINT' with value '/sapdb/CFC/db/bin/backint'.
        Found keyword 'INPUT' with value '/tmp/backint4sapdbCFC.in'.
        Found keyword 'OUTPUT' with value '/tmp/backint4sapdbCFC.out'.
        Found keyword 'ERROROUTPUT' with value '/tmp/backint4sapdbCFC.err'.
        Found keyword 'PARAMETERFILE' with value '/sapdb/CFC/lcbackup/param.cfg'
        Found keyword 'TIMEOUT_SUCCESS' with value '1800'.
        Found keyword 'TIMEOUT_FAILURE' with value '1800'.
    Finished reading of the Backint for MaxDB configuration file.
    Using '/sapdb/CFC/db/bin/backint' as Backint for MaxDB program.
    Using '/tmp/backint4sapdbCFC.in' as input file for Backint for MaxDB.
    Using '/tmp/backint4sapdbCFC.out' as output file for Backint for MaxDB.
    Using '/tmp/backint4sapdbCFC.err' as error output file for Backint for MaxDB
    Using '/sapdb/CFC/lcbackup/param.cfg' as parameter file for Backint for MaxD
B.
    Using '1800' seconds as timeout for Backint for MaxDB in the case of success
    Using '1800' seconds as timeout for Backint for MaxDB in the case of failure
    Using '/sapdb/data/wrk/CFC/dbm.knl' as backup history of a database to migra
te.
    Using '/sapdb/data/wrk/CFC/dbm.ebf' as external backup history of a database
to migrate.
    Checking availability of backups using backint's inquire function.
Check passed successful.
2009-10-22 02:06:08
Checking medium.
Check passed successfully.
2009-10-22 02:06:08
Preparing backup.
    Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
    Setting environment variable 'BI_REQUEST' to value 'NEW'.
    Setting environment variable 'BI_BACKUP' to value 'FULL'.
    Constructed Backint for MaxDB call '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c'.
    Created temporary file '/tmp/backint4sapdbCFC.out' as output for Backint for
MaxDB.
    Created temporary file '/tmp/backint4sapdbCFC.err' as error output for Backi
nt for MaxDB.
    Writing '/sapdb/CFC/lcbackup/pipe1 #PIPE' to the input file.
    Writing '/sapdb/CFC/lcbackup/pipe2 #PIPE' to the input file.
Prepare passed successfully.
2009-10-22 02:06:08
Creating pipes for data transfer.
    Creating pipe '/sapdb/CFC/lcbackup/pipe1' ... Done.
    Creating pipe '/sapdb/CFC/lcbackup/pipe2' ... Done.
All data transfer pipes have been created.
2009-10-22 02:06:08
Starting database action for the backup.
    Requesting 'SAVE DATA QUICK TO '/sapdb/CFC/lcbackup/pipe1' PIPE,'/sapdb/CFC/
lcbackup/pipe2' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACKINT_ONLINE1'' from
db-kernel.
The database is working on the request.
2009-10-22 02:06:09
Waiting until database has prepared the backup.
    Asking for state of database.
    2009-10-22 02:06:09 Database is still preparing the backup.
    Waiting 1 second ... Done.
    Asking for state of database.
    2009-10-22 02:06:10 Database is still preparing the backup.
    Waiting 2 seconds ... Done.
    Asking for state of database.
    2009-10-22 02:06:12 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2009-10-22 02:06:12
Starting Backint for MaxDB.
    Starting Backint for MaxDB process '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c >>/tm
p/backint4sapdbCFC.out 2>>/tmp/backint4sapdbCFC.err'.
    Process was started successfully.
Backint for MaxDB has been started successfully.
2009-10-22 02:06:12
Waiting for end of the backup operation.
    2009-10-22 02:06:12 The backup tool is running.
    2009-10-22 02:06:12 The database is working on the request.
    2009-10-22 02:06:14 The backup tool process has finished work with return co
de 2.
    2009-10-22 02:06:17 The database is working on the request.
    2009-10-22 02:06:27 The database is working on the request.
    2009-10-22 02:06:42 The database is working on the request.
    2009-10-22 02:07:02 The database is working on the request.
    2009-10-22 02:07:15 Canceling Utility-task after a timeout of 60 seconds ela
psed ... OK.
    2009-10-22 02:07:17 The database has finished work on the request.
    Receiving a reply from the database kernel.
    Got the following reply from db-kernel:
        SQL-Code              :-903
The backup operation has ended.
2009-10-22 02:07:17
Filling reply buffer.
    Have encountered error -24920:
        The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
    Constructed the following reply:
        ERR
        -24920,ERR_BACKUPOP: backup operation was unsuccessful
        The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Reply buffer filled.
2009-10-22 02:07:17
Cleaning up.
    Removing data transfer pipes.
        Removing data transfer pipe /sapdb/CFC/lcbackup/pipe2 ... Done.
        Removing data transfer pipe /sapdb/CFC/lcbackup/pipe1 ... Done.
    Removed data transfer pipes successfully.
    Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)-
                                 Data Protection for mySAP(R)
                     Interface between BR*Tools and Tivoli Storage Manager
                     - Version 5, Release 4, Modification 0.0 for Linux x86_64
                           Build: 303 compiled on Nov 16 2006
                (c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved.
        BKI0008E: The environment variable BI_CALLER is not set correctely. The
current value is "DBMSRV"
        usage:
         backint -p <par_file> [-u <user_id>] [-f <function>]
                [-t <type>] [-i <in_file>] [-o <out_file>] [-c]
        where:
               <user_id>    backint utility user
               <function>   backup | restore | inquire | password | delete
               <type>       file | file_online
               <par_file>   parameter file for backup utility
               <in_file>    name of a text file that defines the objects
                            default: STDIN
               <out_file>   Pool for processing messages and the results
                            of the executed function.
                            default: STOUT
        BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT .
        BKI0021I: Elapsed time: 01 sec .
        BKI0024I: Return code is: 2.
End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)---
    Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out
    Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC
.err)----
End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e
rr)----
    Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC
FC.err'.
    Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'.
Have finished clean up successfully.

Also, is there any specification about the user permissions and about how the backup should be run?

Small caps not displaying correctly in the ePub file

Hello All,
I am using cs5.5 to generate ePub file, and I found that small caps contents not displaying correctly in the generated ePub file even the CSS looks correct. Please check and confirm, if anyone faced this issue? Also other formatting components are looks fine in the ePub file.
Thanks,
Praveen

@Jongware/Bob, thanks for your responses, I checked the ePub output using 'Adobe Digital Editions', and getting the same issue in 'Calibre', but in 'Sigil', it looks fine.
In CSS it has been declared like below:
span.SmallCaps {
font-variant : small-caps;
Here 'SmallCaps' is the character style applied for the 'small caps' contents.
Thanks,
Praveen

Link URL containing feed: is not displayed correctly in the status bar

When a link contains feed: in the URL, it is not displayed correctly in the status bar.
The actual URL is
a href="feed:http://www.....com/feed/"
but the URL shown in the status bar is
feed://http//www.....com/feed/
IE8 shows the correct URL in the status bar. Not sure if this is a problem, but thought I would report it.

Such a feed works for me even if it is displayed differently then you expect on the status bar.
<pre><nowiki>data:text/html,<a href="feed:https://support.mozilla.com/en-US/questions/758020/feed">feed</a></nowiki></pre>

Alert rules not displaying correctly in the RWB after transporting to QA

Hi Experts,
After transporting the alert rules from DEV to QA, the rules are not correctly displayed in the RWB in QA e.g. a star (*) is displayed in all the fields instead of the filter values which I have entered such as the "Sender Party"; "Sender Interface" etc. I am also not able to manually change the values in the RWB in QA anymore because the values are greyed out.
Strangely enough, the rules are correctly displayed inside the SXMSALERTRULES table in QA.
Do you perhaps know how to solve this issue so that the rules are also correclty displayed in the RWB after transporting?
Thanks and regards
Brendon

Having the same problem and looking for fix...

Main Sub not displayed correctly on the FPL9

Hello Experts,
We have requirement to credit the GL account only after payment is received against the specific receivable e.g. $ 20 charge posted on the account and $ 18 payment clears the charge partially then crediting the GL account for $ 18. In order to achieve this we are using statistical posting logic. First defined main sub (e.g. Statistical 00XX 00AA) with statistical key 'G' and mapped these statistical sub to real subs using posting area 1010 (e.g. Real 00XX 00BB). Also defined liability GL account for these real subs (00XX 00BB) in EK02 and in FQZB (against MAIN transaction "00XX" and not against SUBs). Now, the problem is - payment clears the $ 20 charge correctly, it credits the liability GL correctly, and it also updates tables such as DFKKOP with required new entry of (REAL SUB i.e. 00XX 00BB) line but it doesn't show that line correctly on the FPL9 screen. It shows cleared $ 18 line item with statistical MAIN SUB (00XX 00AA).
Am I missing something here? Could you please help me to resolve this issue. Please also let me know if you think there is better way to address this requirement.
Regards,
A-jay.

Hi Dany,
It sound like tyou are trying to localize your application to Japanese. You might want to take a loot at this link here
Joe Daily
National Instruments
Applications Engineer
may the G be with you ....

Gmail usernames and passwords not displaying correctly - is the issue with Firefox?

I have 3 email accts and when I click username in Gmail those 3 would show and passwords would be remembered automatically. Now it shows these 3 and 2 others that have been used before, plus NO passwords displayed. In the past if this happened I refreshed page and it went back to the 3 accts - this is no longer happening. Could it be a firefox issue?
Also my autofill in Gmail is no longer working and I have seen other inquiries about that. Is there any info on how to fix these???

This is a known issue in Firefox 4 beta 12. You could wait til' the RC comes out, or you could grab one of the latest nightly builds availible here that fix this problem: ftp://ftp.mozilla.org/pub/firefox/nightly/latest-mozilla-central/
Just a note though, nightly versions of firefox are generally less stable than betas or releases. I am waiting for the Release Candidate to come out myself. (Should be early next week)

4x3 format SD tape import looks ok on monitor , but, the DVD produced does not display correctly ? The format looks slightly thinner in width?

I have been archiving old Hi- 8 SD tape and when displayed on the PC monitor looks right. And looks correct on a TV Monitor.
But, the DVD when produced looks right on a TV monitor but, thinner when imported back as a DVD into Adobe Premiere Pro , how can I adjust this ? I know a 1,000pixels instead of 720 would fix the issue, i have checked it in Photoshop.
I have others that need extra editing, as the previous Sequences have been removed from the computer ?

usually this is caused by pixel aspect ratio. premiere usually reads it properly, but if it doesn't you can change it to a new value. in the project bin, right click the file(s) and choose modify, interpret footage. there is an option for pixel aspect ratio, you can try some till one looks right. the 1.21 or 1.45 might do what you are looking for...

Fonts not displaying correctly in the Character panel.

This is a problem i have across most of my cs6 applications in particular Illustrator but also in photoshop and indesign.
It started after i upgraded my mac to OS X Yosemite from Mountain Lion, i had read else where about it being an issue in cs5 with the new transparency feature of Yosemite and that by checking reduce transparency in the accessibility options that the problem would be solved. This worked partially to correct the problem but there are still glitches with the drop down font preview menus. I have included some screen shots of how the menus look the first is from photoshop and the second from illustrator both after i have checked the reduced transparency option in system preferences.

Having the same problem and looking for fix...

Documents and spreadsheets not displaying correctly on the task bar

When I open a series of documents or excel spreadsheets, quite often they will appear as blanks on the task bar and I have to right click - restore to be able to see a preview or select them for editing. If I do normal left click on the document nothing
happens and they stay blank.
If I could get a picture of my desktop loaded it would show the cursor on MS word on the taskbar then above the taskbar a preview of the 4 sessions - 2 have documents you can see and 2 are blank. THe first 2 I had to right click restore to be able to see.
THe other 2 will be blank until I right click then restore

Hi Tmac4x4，
Please share us a screenshot as arnavsharma mentioned.
Please open the event viewer and check if there are any related error log. For more information about the event log, please refer to the following KB.
http://support2.microsoft.com/kb/308427
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Accented characters do not display correctly if there is a variable beside it

Hello,
We are experiencing a problem when we have text with accented characters an a variable beside it within the same text box.
The problem is that the accented characters in the text do not display correctly in the preview or publised course to Flash9
These characters display correctly in Captivate in edit mode.
This is the process we have followed:
Export to XML
Translated
Import XML
Publish to Flash9
Captivate version: 4
OS: Windows Vista SP2
We have tried to work with locale in Spanish with no luck, the only solution we have found is to put the text and the variable in different text boxes
I have pasted an image of the preview and also of the text in Captivate edit mode.
Any help will be very welcomed !
Tess

Hi there
I agree with Lilybiri that you should definitely file a Bug Report.
However, a thought occurs here. Have you tried placing the accented text in a User Defined variable?
Assuming this is a workaround, my thought is that you could then just have a caption with two variables. The User Defined variable containing the accented text followed immediately by the system variable providing the Project Name.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Eurosign not displayed correctly when picked from database

Hi ..
I'm having a problem getting a eurosign stored in an Oracle Database to be displayed correctly in my Crystal Reports 11.5.
When using the built in (preview) Crystal Viewer, the eurosign is displayed correctly, but when I want to print the report directly to a printer or to export it to pdf the eurosign is displayed as a box?
It only haapens when i need to pick the eurosign from the database. If I insert in a textbox on the report, it will show correctly.
Please Help.
Best regards,
Jacob

What is the source of the text stored in the database. I ran into an issue a ways back where someone was copying news articles from a website into their database and the euro symbol would not display correctly (unless the option HTML Text Interpretation was used).
You might want to do a quick check to see if it is stored as an ascii character using a formula similar to the following;
asc(mid({database, x, 1}))
where x = the position of the euro symbol in the string.
The formula result should be 128.
Edited by: Graham Cunningham on May 22, 2009 12:20 PM

Outlook web login screen not displaying correctly on Exchange 2007 service pack install

Hello everyone,
I believe our exchange server installed a service pack 3 update and after rebooting the server, we noticed that the Outlook web access login screen is not displaying correctly. The page looks white with some black X's (I think that's where the
pictures/background images used to be). We tried to restart the ISS service with no luck. I would appreciate any help you guys can provide.
Thanks,
Brian Kourdou

Hi,
I have seen this issue in another similar thread, that issue was solved by re-creating the OWA virtual directory.
Please try the following steps to solve this issue.
Open EMC, navigate to Server Configuration -> Client Access, under Outlook Web App tab, double-click owa (default web site) properties.
Then check InternalURL, ExternalURL, Forms-Based Authentication settings ect
Open EMS, use Get-OwaVirtualDirectory get the list of virtual directories and identify the directory which is giving the problem.
Remove it with this command
Remove-OwaVirtualDirectory “owa (Default Web Site)”
Now create it again with the following command
New-OwaVirtualDirectory -OwaVersion “Exchange2007″ -Name “owa (Default Web Site)”
Then configure the “owa” virtual directory settings like InternalURL, ExternalURL, Forms-Based Authentications etc… & check the OWA by logging with some test users.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Blender do not display correctly after upgrading xorg

Yesterday, I do a pacman -Syu
and then found that blender do not display correctly.
The panels are not shown and the working area is cut into 2 halves of different colors.
Then I check /var/cache and found that some X components were upgraded.
My graphic card is ATi mobility Radeon 7500
Anybody can help?Thanks!

From the description, I seem to have exactly the same problem. My wm is dwm-4.0 and I grabbed some other info which may be useful:
[root@myhost ~]# Xorg -version
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux myhost 2.6.19-beyond #1 SMP PREEMPT Fri Dec 15 17:41:19 EST 2006 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
[root@myhost ~]# blender -v
Blender 2.43
[root@myhost ~]# pacman -Qii xorg
Name : xorg
Version : 11R7.0-1
Groups : None
Packager : Arch Linux (http://www.archlinux.org)
URL :
License : None
Architecture : i686
Size : 4096
Build Date : Sat Feb 18 14:04:14 2006 UTC
Install Date : Wed Jul 26 22:39:07 2006 UTC
Install Script : Yes
Reason: : explicitly installed
Provides : None
Depends On : xf86-input-keyboard xf86-input-mouse xf86-video-vesa xorg-server xorg-server-utils xorg-xauth xorg-xinit xorg-xkb-utils
Required By : None
Conflicts With : None
Description : X.Org dummy package
[root@myhost ~]# pacman -Qii blender
Name : blender
Version : 2.43-3
Groups : None
Packager : Arch Linux (http://www.archlinux.org)
URL : http://blender3d.org
License : None
Architecture : i686
Size : 31041839
Build Date : Mon Mar 12 22:28:29 2007 UTC
Install Date : Thu Mar 22 05:45:42 2007 UTC
Install Script : Yes
Reason: : explicitly installed
Provides : None
Depends On : desktop-file-utils libjpeg libpng openexr python>=2.5 sdl
Required By : None
Conflicts With : None
Description : A fully integrated 3D graphics creation suite
Also, when I run blender from a term it says 'Compiled with Python version 2.5' (no error messages).
It has been a few days since I pacman -Syu'd, so I'll do that and report back if it fixes things.

Hierarchy variable inpu help not displayed correctly in the portal

Similar Messages

Maybe you are looking for