High Availablity Report Server Options

Hi
What is the best options to provide the high availabilty for report server , Is it safe to use NLB for my production environment?. Currently there is one report server ,It down due to various reasons.
Thanks & Regards Manoj

https://msdn.microsoft.com/en-us/library/bb522745.aspx
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Similar Messages

Bipublisher desktop - report server

Hi,
I am using bi publisher desktop on windows 7 with office 2010, I am trying to edit a templated generated from an R12 instance, before I can open the file I am prombted to logon. it prompts me for a username password and Report Server, how can I find out what to enter into the report server option.

I am getting the same error too! Any help is greatly appreciated. I use OAS 10.1.3.3 to host the xmlp server. I can bring up BI Publisher by entering the URL on a browser. However when I cut paste the same URL into BI Plublisher / MS Word login box it doesn't work.

Timer option in report server

Hi All
is there any option in report server that when a report till not run in 1 minute or any specific time time then the sesion expires or report server time out.how can we manually set this option to our desired time period.
thanks

HI,
I'm not sure whether you mean that, but there is a reportserver conf file in [ORACLE_HOME]/reports/conf where you can define the following parameters of the certain server that may help you:
maxIdle
The number of minutes of allowable idle time
before the engine is shut down, provided the
current number of engines is higher than
minEngine.
callbackTimeOut
The number of milliseconds of allowable waiting
time between when the server calls an engine and
the engine calls the server back.
Hope it helps,
regards,
Heike

Connecting Crystal reports server 2008 to BI 7.0

Hello,
I have a BI 7.0 server on Unix machine. I am trying to install crystal reports 2008 on windows 2003 server, and further integrate it to SAP BI by installing SAP integration kit. I have done the below.
1) Installed crystal reports server 2008 on windows 2003 server.
2) I can launch the CMS by start programs --> crystal reports server 2008 --> Central Management console.
3) I enter my user id an password and can see the business object portal with all the entries in it,
4) I have also installed SAP BOBJ integration kit (XI3.0) as well. It installs successfully. The only difference in the guide and what I did was, it dint prompt me for the CMS information, but it did when I was installing crystal reports server 2008.
5) Now I am able to connect to CMS, but I donot find the SAP authentication tab, and the server details tab, as per the guide.
I am a basis admin, and experimenting this for the 1st time. I need to set this up for one of the clients. They want to do some BI reporting through crystal reports. I have installed crystal reports server as of now. The client will now try to access it through CMS , by "InfoView". But CMS isnt giving me SAP auth tab, for me to go ahead and configure the SAP related settings.
Any inputs on the same will be highly appreciated.
Thanks,
AK

Hi Ingo,
Thanks for that reply..I am stuck now when I am trying to publish a report. I will summarize, what I have done so faar, just to make it easier to reply.
1) Installed the BO edge series xi 3.1
2) Installed Crystal report 2008
3) Installed the BOBJ/SAP integration kit.
4) Did the configuration steps as per the manual downloaded from SAP site named:"XI3-1_BIP_SAP_INSTALL_EN.pdf"
I created create a report, but I am not able to publish it. I am clicking the option to directly publish it to enterprise.But its failing complaining regarding some BI roles..not sure...My BW publisher service is starting fine.
Only thing is, I have created all the athorizations etc. i can also Log in to CMC with my BW credentials..So I am assuming BOE is atleast talking with SAP. But my my main aim is publishing reports on the server, which isnt happening when I save it with the above option.
Ok..one more thing, i have not performed the steps for the SAP/BOBJ server side trust..I think this might be the reason as well..Wanted your opinion on it.
Appreciate your input as always..
Thanks,
AK

Migrating all configuration from Crystal Reports Server XI R2 to Crystal Server 2013

Hi,
We're running an old Crystal Reports Server XI R2 SP version (boe 11.5) and we're planning to start using Crystal Server 2013
As far as I know no upgrade is possible and that's not needed either.
Instead I'm interested in the migrate possibilities. I saw this thread but it doesn't answer all the questions https://scn.sap.com/thread/3462417
So first I will install Crystal Server 2013 on a new server and then I use some migrate tool.
Questions:
- does the migrate tool support migrating from my version CR server XI R2 SP1 to Crystal Server 2013 ?
- does the migrate tool copy all report schduling information (recurring schedule, destination etc)? We have ~1000 scheduled reports so doing manually is not an option
- does the migrate tool copy Business views/Business view connections ?
(- odbc data sources are probably not copied but that's ok)
-Mikael

Hi Mikael,
Since you're already on CR Server XI R2, you can use the Upgrade Management Tool to migrate all the content to CR Server 2013.
Anwers to your questions:
1) Yes, the Upgrade Management Tool does support this kind of migration
2) It does seem that the UMT allows you to move all report instances as well as the scheduled jobs over to the new server
3) I've always had issues with Business Views when using Import Wizard however I'm not sure whether they work well with the new UMT. In any case, I always prefer to export the LOVs and BVs from within the Business View Manager to a .xml file and then import them in the higher version of the Server, again, from within the Business View Manager.
-Abhilash

Reports Server Process gets crashed in 10.1.2.3.0

Hi,
We have 5 standalone production reports servers (10.1.2.3) load balanced through netscalar. We observed that the reports server process gets crashed intermittently which kills the reports jobs in the queue. Error as below is seen in the ipm.log under $ORACLE_HOME/opmn
08/08/12 10:38:21 [4] Process Crashed: rep_brnors05_frs_standalone~ReportsServer~rep_brnors05_frs_standalone~1 (498925945:6108) - Restarting
08/08/12 10:38:27 [4] Starting Process: rep_brnors05_frs_standalone~ReportsServer~rep_brnors05_frs_standalone~1 (498925946:0)
08/08/12 10:38:34 [4] Process Alive: rep_brnors05_frs_standalone~ReportsServer~rep_brnors05_frs_standalone~1 (498925946:2836)
Any idea wat could be causing the problem.. any configuration changes that need to be done like to set or increase some timeout parameters in the rep_server.conf, etc. Each time process crash is for exact 6 secs. It clears the failed jobs queue during this time. Do not see any jobs starting or ending during these 6 seconds.
Reports server version - 10.1.2.3.0
Platform - Windows
Report server type - Standalone
(Affecting our production environment ... Any suggestions, workarounds are highly appreciated)

Michael,
Below is the file change. When we set it to 'true' Viewer performed correctly.
Jerre
=====
2. Then a new configuration parameter "passNullParameterAsNull" needs to be set in configuration.xml under <viewer section with default value as false and which is an optional one. Usage :
<viewer queryRefreshPeriod="3000" queryRequestTimeout="1000" longRequestRefreshPeriod="6000" longRequestTimeout="10000" userDefinedConnections="true" passNullParameterAsNull="true" logLevel="debug" laf="dc_blaf" pageNavigation="true" switchWorksheetBehavior="prompt" defaultLocale="en" disableBrowserCaching="false" enableAppsSSOConnection="false">
When passNullParameterAsNull="false" , that means, when null is passed as parameter from one sheet to another during drill to link, the value will be converted in between to the value which is set as "ShowNullValueAs" in second sheet. eg: if ShowNullValueAs = "" in second sheet. Null value passed from first sheet will reach as value "" in second sheet. If passNullParameterAsNull="true", then Null value will always be passed as Null to second sheet irrespective of the value of "ShowNullValueAs" in second sheet.
=====

Reports Server 6. installation problem on NT

Hi,
I am trying to install Dev2k Reports server on NT4, SP3. I created the Report server service, configured it to start up service as my user account.
The starting up of the service fails. In the ORAHOME/Rerpot60/server/*.log file I keep getting the 'Daemon failed to listen to port.' error message. I simply have not got a clue, what may be the problem.
Any help will be highly appreciated.
Tamas Szecsy
[email protected] or [email protected]
null

hi Akshay!
Is there something in this log that looks fishy?
i'm not a software engineer (kind of an installation nurse/paramedic), so i can't help you there. did you email the log to Gayle?
love, b

Report created in SSRS 2008 is not able to upload in 2008 report server

I have created a report in SSRS 2008 version. Our reporting server is 2008 R2. I'm getting the error given below while uploading the .rdl file to report server.
The report definition is not valid. Details: The report definition has an invalid target namespace 'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' which cannot be upgraded.
Then I've checked the code of the solution and it is created in 2008. It is given below:
" Microsoft Visual Studio Solution File, Format Version 10.00 # Visual Studio 2008 ........."
Also, I've checked the code of .rdl file but that made me confused. It shows that the file is created in 2010.
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner" xmlns:cl="http://schemas.microsoft.com/sqlserver/reporting/2010/01/componentdefinition" xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition">
Visual studio 2010 is also installed in my system. Also, I have noticed that even if we try to open a report then by default it is showing data tools option.I have tried multiple times to create report in 2008. But, still the same result. Also, I could find
that ,the report will be in 2008 till the creation of data source. The report will be converted to 2010 after creating data set. I have been creating shared dataset and I was getting the above issue.Then I have tried by not creating a shared dataset and
directly creating dataset in the report data and it has been created as 2008 report. I was able to upload this report to report server 2008R2.
Can any of you help me to find why the report is created in 2010 while creating shared dataset?

I have created a report in SSRS 2008 version. Our reporting server is 2008 R2. .
xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition">
Hello Julie,
You mix up Version of Visual Studio, Reporting Services and Report Definition; all those products have Independent Version numbers and are not related to each other.
Important are the Versions of used SSRS and BIDS, the plugin for Visual Studio. By the Version of Report Definiton you have create a Report with BIDS 2008R2 or SSDT = SQL Server Data Tools; see
http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition/
Are you sure you have SSRS 2008 R2 (in post subject you wrote SSRS
2008)? If it's SSRS 2008 then you really can't deploy the Report to SSRS, you would have to use BIDS 2008 to create the report. Check the Version of SSRS or use "Report Builder 2.0", you can start it directly from "Report Manager"
URL.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Changing a SQL Report server Database to a new One Using Powershell script

Hi,
I have an existing report server (Native Mode) and a pre-configured report server database. I have created a new database and want to assign it new report server database. How can i automate this process using powershell?
Here is the detail requirement
If there is a Report Server database seeded on the xxxxx server, follow the below steps:
◾Click the Database button on the left. Click on the Change Database button, choose option Choose an existing report server database. Enter the RPT server name (e.g. xxxxxx) in Server Name text box and click Next.
◾In the Report Server Database selection, select the ReportServer database. Then click next button to complete the process.
Any help in this regard will be very much helpfull.
Sushruta Banerjee

Hi Sushruta,
To query export from Report server Database, the scripts below may be helpful for you:
Export RDL Files from ReportServer Database with PowerShell
SQL Database Reports with PowerShell
I hope this helps.

Custom Paper Size : Migrating from 6i to 10g report server engine

Hi,
pardon my bad english !!
I'm studying to migrate form/reports 6i to 10G. In report 6i we have reports with custom paper size ("A5" format that is half of "A4", 15x21cm).
In report server 6i environment (Win2000 server) we have done this configuration.
- We configure printer; one input tray has "custom" format.
- We create an OS user (es. CustRep);this user has a "default printer" that has input tray with "custom" format as default tray.
- We create a new report server (es. CustRepSrv); this report server start as service with CustRep user credentials.
- Every report (PDF format) generated and printed (destype=printer,desname="My Printer") with CustRepSrv report server get custom format as paper size and so fit with Custom tray definition on the printer.
Can I do the same in report server 10G environment ??
Thanks
Andrea

Using these and not hearing much bad
Init Engine 1
Max Engine 6
Min Engine 0
Eng Life 10
MaxIdle 30
Trace Error
Trace Replace
I set my Report Server Parameters
CACHE SIZE - 700
CACHE DIRECTORY = (you have to decide)
IDLE timeout 120
Max Connections 120
Max Queue Size 4000
trace options = trace_err
trace mode trace_replace

Report runs in Report Builder but hangs in Report Server

Hi,
I am using Oracle Reports 10g to build a report with many formula columns. Everything was working perfectly till I added some condition in a query in formula columns. After adding it, report is not working in Report Server but runs only in Report Builder. If I removed this condition, report runs OK but I need it. This condition is very simple, just filtering be a decoded column (i.e. stts = 'D')
Can anyone suggest how to solve this problem?

Hi,
what is the application server version you are running your reports on?
If it is 10.1.2.0.2 to 10.1.2.2 and you are using PDF SUBSETTING (check the [PDF:Subset] section in the uifont.ali file in your server) then you are most probably facing Bug:5029259 . To resolve the issue read further Doc ID 363868.1 in Oracle Support. In short, your options are:
1. apply patchset 10.1.2.3 or maybe patch 5029259 is enough.
2. or make sure no NULL values are returned in the report. Use nvl where possible. If there was no problem before making the changes then maybe checking the new formula columns would be enough. I made this change myself when facing this issue and it appears that this resolved the problem.
3. or change REPORTS_ENHANCED_SUBSET to NO in windows registry if under windows or $ORACLE_HOME/bin/reports.sh if under linux. REPORTS_ENHANCED_SUBSET=YES is necessary if you are using TTF subsetting, though. So this might not be an option.
Julius Z

Please help with my crystal reports server 2008 trial setup

Firstly, if this is in the wrong section feel free to move it. I find this forum is to big to find the information i need, in fact trying to find anything i need on this website is almost impossible. So far not impressed with SAP at all! we download a trial and when we have problems nobody can support us and we have to post in the forums for answers, which i find disgracefull to be honest. So this post is my last attempt of finding the answers to my problems or we are going to forget crystal reports server for good! I was also told that if i wanted help setting this up then i would have to pay, thats not how things usually go when we download a trial of any software!
Anyway, rant over!!
Right, we have windows server 2008 and have installed crystal reports server 2008. So far all i have managed to get working is the reports themselves which run and schedule fine. The dashboard and business views are so confusing i just dont get it at all, the manuals dont help either becuase they are rubbish basically. But my first problem is trying to get windows AD authentication working! easier said than done. I have spent 4 days trying to get it working but nothing is happening. this is what i have done so far
Set up all the options in the CMC to enable AD authentication, mapped a few groups one of which i am a member of.
Then i setup the krb5.ini file like below (removed my server name and domain name)
[libdefaults]
    default_realm = DOMAIN.CO.UK
    dns_lookup_kdc = true
    dns_lookup_realm = true
    udp_preference_limit = 1
[realms]
DOMAIN.CO.UK = {
    kdc = DC.CO.UK
    default_domain = DOMAIN.CO.UK
i also have that other file bscLogin which looks like this...
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required;
The server inteligence agent has been set to use the same username as i specified in the CMC which is also the service principal name and the administartion name
i have set the web config file to use SecWINAD as default, i have also set it to give the option of enterprise, win ad etc in a drop down list
i have gone round in circles for days following the instructions, and nothing is happening
Also i dont see any usernames within the groups i have mapped , am i supposed to see any? am i supposed to add them manually?? if so, whats the point in that?
So now everytime i try to log in i get this error message
Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserName@DNS_DomainName, and then try again. (FWM 00006)
There is also another error message i get, which isnt coming up right now but it says somthing along the lines of could not authenticate at this time (FWM 00005)
i fail to see what im doing wrong. I shoudl also point out that the username i am using for everything is our own network admin password!
any ideas on things to check before we give up with this all together?

Hi Roberto,
With the changes when SAP took over BusinessObjects the support packaging also changed. It's the way it is now but we are moving to and giving as much options as we can. SAP works on the Self Serve practice. the info is available but you have to find it, which is another thing we are working on to improve for BOE/CRS.
Best place to start is in the CMS link off the start menu, You'll find the Admin Guide and Setup/Configuration Guides. You can also find all of the latest info and updates to those guides from help.sap.com then click on the SAP BusinessObjects tab along the top and then on the left click on All Products and then filter on your version.
Once the Firewalls and Domains and your CRS Server is added to the Trusted Domains and ports opened to allow CRS to talk to the DNS Server CRS will begin to load all of the users into it's User Mappings. You still have to add each user or Group of Users but they will be available. Documents does describe how to....
Once you have the Admin Guide search on Security and it explains in details how to set up and which ports need to be opened etc.
Thank you
Don

Report server name issue

Dear All,
I am stucking with the following problem,
I have deployed my ERP apllication (developed in oracle forms & reports 10g) on oracle apllication server 10g forms & report services. my apllication server has two LAN card. out of two one has been configured with statis IP for web access. but while running report from parameter form i am taking report url from table. table contain report server name as my local server name.
My problem is,
If i am accessing erp from web using static ip and running report then server name is not recognized
because it is my local server name coming from table. so for that every time i need to change report url & replace server name with statis ip in browser addr for web users.
Please guide me what should i do to resolve this issue.
Your reply would be greatly apprecited.
Thanks

If "Credentials supplied by the user running the report" is selected, when the report is run, the user will be prompted to provide credentials. They would need to provide credentials that have the appropriate permissions (e.g., read, execute) to the
database. This prevents the double hop.
If "Credentials stored securely in the report server" is selected, you have to enter the username and password of a user (or service account) that has the appropriate permissions (e.g., read, execute) to the database. When the report is run, SSRS will use
these stored credentials each time to authenticate to the database engine and query the data. Users running the report are not prompted to provide credentials. With this option you can use an Active Directory or SQL Server account.
In order to access/run the report, a user will need to authenticate to SSRS. There are options here as well. You can provide them the link to the report manager and they can authenticate, navigate to, and run the report. You can also provide
direct links to reports that users click in a document or application. At this point the user is typically still prompted to authenticate to SSRS. You can also programmatically call the report using API's and essentially build a proxy that authenticates
to SSRS and open the report.
Not sure if that answers your question.

Report Server 10g - unexpected font change on second page of the report

Hi all,
I'm having a problem with Oracle Report server 10.1.2.3.0.
It's sometimes using an unusual font (It think it looks like a Greek one).
One example would be when a text overflow from page one to the second page it will change from Times New Roman to a "Greek" font and switches from bold to normal font it still happens in the same "Text" type item just on a new page. However when I update the text in the DB to a longer one so it flows through the whole second page to the 3rd page then it's using the correct font again.
When I open the generated PDF file in a text editor I see an unusual value in one of the font settings "/BaseFont /#53#79#6D#62#6F#6C" when I edit it manually to the value taken from another occurrence of the "BaseFont" in the same file it helps and changes the font to the correct one.
When I export the report to the PDF from report builder it's always using the correct font.
The encoded font "/#53#79#6D#62#6F#6C" translates to: "Symbol"
select CHR(TO_NUMBER('53','xx'))||CHR(TO_NUMBER('79','xx'))||CHR(TO_NUMBER('6D','xx'))||CHR(TO_NUMBER('62','xx'))||CHR(TO_NUMBER('6F','xx'))||CHR(TO_NUMBER('6C','xx')) from dual;
The correct font is as expected "Times-Roman"
I noticed that this happens only when HTML code is allowed in the Text/field. When I generate HTML version of the report I see after the page break and new table on the new page the following tag <font face="symbol">. When I set Web Setting->"Contains HTML Tags" set to NO then font stays the same even after the page break.
Did anyone experienced something similar?
Thank you,
Palo

We have had this a few times before and there are 2 ways that most likley will fix this.
If on mac close all adobe apps, do a find for all files with the .lst in their file name. Delete all you .lst files, they are font database files that go corrupt and will regenerate themselves when needed and usually a working copy.
Close any multiple master fonts you have open in fontbook, and other utility such as Suitcase. Multiple master fonts will have a filename like "Kronos mm", and in the adobe illustrator type >> font menu i believe they have a different icon (possibly a mm) than the others {a(type 1), tt(true type), O (opentype)}
Your problem is likely the 1st option, as the mm problem usually happens while editing the file, while the other is after you open the file. If you still have the problem, you then may have 2 different fonts sharing the same FOND ID number. Close as many fonts as you can, especially the one that looks like your wrong font.

Invalid Key code Error while installing crystal report server 11

While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
MAILS--Dear Mohit,
Thanks for the patience.
We have received the below update from the Licensing Team.
You received your permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but you elected to use version XI instead and received key .
You would need to enroll the licenses in maintenance if you want to upgrade them.
In case of any queries please create a ticket via the Service Market Place.
Regards,
Jessy
Customer Interaction Center
SAP Active Global Support
Hello Jessy,
The customer received their permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but they elected to use version XI instead and they received key .
They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
Kind regards,
Rosemary
From: BOSAPASIA
Sent: 29 September 2009 05:49
To: Savage, Rosemary
Subject: FW: Crystal Reports Server Installation Issue
Importance: High
HI Rose ,
Need your assistance on the below issue.
Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
Regards,
Jessy
CIC Team Lead
Customer Interaction Center
Global Support Centre India
SAP Labs India Pvt Ltd
Hi,
Providing you with the required details to proceed further
Registration Number-
Registration Email Address-taxmantra.support
And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
Dear Mohitk,
Thank you for your information.
I checked with the concerned colleague and received the below update:
Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
If you did not register before, as the promotion is over so the key code could not be replaced.
I request you to kindly check the same at your end and revert with the details.
Moreover, there are two ways for Crystal Report customer to get support.
One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
A learning map was provided, listed on left column.
The other is customer with only Crystal report product, the support is via SDN.
http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
Customers can first check whether other customer has got the same issue and find the reply from our engineers.
You may also post your own thread for support.
Anything else I could help, please do not hesitate to contact again.
Hi,
I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
Please find attached the Scanned Document containing the details as per the details required by you.
Hope to see a quick resolution for the issue.
Dear Mohit,
Thank you for your e-mail.
As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
Your customer number:
Your customer name and address:
Purchase order number:
Any other products purchased along with Crystal Reports Server 11
Any S-User Id:
Any old case ID:
Please feel free to contact us if any further queries.
Hi,
I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
"The product key code you have entered is incorrect"
We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
Please help us to resolve the issue as early as possible.
My contact number:
If you need any further information do let me know

Ajit,
By design, the product is not able to be installed under the superuser account.
1. Create a new user and specify a home directory for the user without a quota set.
2. Copy or move the installation files to a directory that the new user can read. I suggest you move the installation files directly into the new user's home directory.
3. Logon as the new user (or su - newuser)
4. run the installation shell script using that new user's account.
NOTE: Ensure the system meets the requirements from the supported platforms documents.
.Tony

High Availablity Report Server Options

Similar Messages

Maybe you are looking for