High battery consumption

Hi
Something doesnt seem right
screen brightness at 50%, keylights off, no cd in the drive, NO usb devices connected, no runaway proccesses, and only a ethernet wire plugged in. How is that 14W?
even with brightness at 20% it is using 7.4 watts

You have posted the same issue numerous times...
You obviously are at your wits end. If you are not going to seek applecare, then you could try the following. However I would not advise doing this unless you know what you are doing & understand the risks.
Last resort, but if it fixes your problem then I guess that is a plus. If you are under warranty, I would suggest you cash that in while you can. Please read the risks or unsaved work:
This will turn off all the safeguards in place to protect your unsaved data. If you leave your macbook unplugged, and it runs out of battery, goodbye unsaved work.
So here is how to change power management (Hibernation) to see if this fixes your problem:
You can change the way your computer hibernates from hibernatemode 3 to 0.
3 = RAM is powered on while sleeping, but RAM contents are also written to disk before sleeping. In the event of total power loss, the system enters hibernation mode automatically. The downside to this mode is that it is very slow. The upside is that it is very unlikely that you will lose any unsaved work should your mbp lose power.
0 = RAM powered on while sleeping, safe sleep disabled, and super-fast wake. The downside to this mode is that it does not save any of your work, should your mbp lose power, and you would have to remember to manually save before putting to sleep. The upside is that your computer would sleep & wake up in around 2 seconds.
Go to Terminal & type:
pmset -g
That should give you a result of 3 for hibernatemode
To change it to 0 type:
sudo pmset -a hibernatemode 0
It might ask you to enter your password.
Then delete the old sleepimage file:
cd /var/vm
sudo rm sleepimage
Just remember, saving will have to be done manually by you, or you will lose you unsaved work.

Similar Messages

  • Iphone5 very high battery consumption after ios7 upgrade

    Hi all,
    i've upgraded my iphone5 to ios7. Since then the power consumption is very high. A full charged battery is empty over night (no apps running in backgroud) so the iphone is off in the morning.
    Maybe a special reboot helps, but I don't know how todo?
    Any ideas?
    THX in advance!
    Robby

    btw: here's the ios battery thread, it did work for me after some updates and stopped "ranting" - so we may need to be patient, since apple NEVER tells something - I assume some weeks or 1 month, I am using a mophie battery / cover which helps a bit till then.. https://discussions.apple.com/message/21617916#21617916

  • Problem  in iOS 7, high battery consumption and excessive consumption of data exchange accounts

    yesterday I upgrade to iOS 7, then I started to feel warm on the iphone and review data consumed and increasingly gained more, check detailed consumption and note that consumption was generated in "Exchange accounts" How I can fix this?

    Try removing and re adding the exchange accounts.
    If that doesnt resolve it then reset the phone and see hwo that goes.
    You may even need to restore the iPhone from a backup in iTunes.

  • IPhone 3gs battery consumption very high after updating to IOS 6

    HI,
                 After updating my iphone 3GS to ios 6,battery consumption is very high.I observed this changes in my iphone 3gs after updating my iphone 3gs to IOS 6.

    Is there a SIM in the device?  A SIM is required for activation.
    The most common reason for activation issues is due to the device being hacked or jailbroken.  If this is the case, no support can be provided here and Apple will not touch the device.

  • Battery consumption in power supply operation

    Hello there.
    i have a Problem with my MacBook Pro 15 i5 using Windows 7 with Bootcamp:
    If i start my Mac with Windows 7 ( Power Supply and FULL Battery ) and start play a game ( for 2 or 3 hours ) the Battery is almost empty (Windows Info: "Power Supply Operation - Battery charing - 15% left") after quitting this game. So my Macbook has a Battery consumption during power supply operation. Why my Macbook is using the Battery instead of Power Supply ?
    If i use Mac OS i dont have this problem. Just with Windows 7.
    Why the Battery is almost empty after playing a game although i used Power Supply ?
    Any ideas ?
    Thanks

    no ideas ? i really need help !

  • High memory consumption in XSL transformations (XSLT)

    Hello colleagues!
    We have the problem of a very high memory consumption when transforming XML
    files with CALL TRANSFORMATION.
    Code example:
    CALL TRANSFORMATION /ipro/wml_translate_cls_ilfo
                SOURCE XML lx_clause_text
                RESULT XML lx_temp.
    lx_clause_text is a WordML xstring (i.e. it is a Microsoft Word file in XML
    format) and can therefore not be easily splitted into several parts.
    Unfortunately this string can get very huge (e.g. 50MB). The problem is that
    it seems that CALL TRANSFORMATION allocates memory for the source and result
    xstrings but doesn't free them after the transformation.
    So in this example this would mean that the transformation allocates ~100MB
    memory (50MB for source, ~50MB for result) and doesn't free it. Multiply
    this with a couple of transformations and a good amount of users and you see
    we get in trouble.
    I found this note regarding the problem: 1081257
    But we couldn't figure out how this problem could be solved in our case. The
    note proposes to "use several short-running programs". What is meant with
    this? By the way, our application is done with Web Dynpro for ABAP.
    Thank you very much!
    With best regards,
    Mario Düssel

    Hi,
    q1. how come the Ram consumption is increased to 99% on all the three boxes?If we continue with the theory that network connectivity was lost between the hosts, the Coherence servers on the local hosts would form their own clusters. Prior to the "split", each cache server would hold 1/12 of the primary and 1/12 of the backup (assuming you have one backup). Since Coherence avoids selecting a backup on the same host as the primary when possible, the 4 servers on each host would hold 2/3 of the cache. After the spit, each server would hold 1/6 of the primary and 1/6 of the backup, i.e., twice the memory it previously consumed for the cache. It is also possible that a substantial portion of the missing 1/3 of the cache may be restored from the near caches, in which case, each server would then hold 1/4 of the primary and 1/4 of the backup, i.e., thrice the memory it previously consumed for the cache.
    q2: where is the cache data stored in the coherence servers?on which memory?The cache data is typically stored in the jvm's heap memory area.
    Have you reviewed the logs?
    Regards,
    Harv

  • HT1222 Has anyone else noticed much greater battery consumption since iOS 5.1.1 update for iPhone?

    Since iOS 5.1.1 update has anyone else noticed a much greater battery consumption on all fronts? My phone used to rock steady all day and know is around 47%  12 noon to 1 pm with the same amount of usage.

    Heres a support question... how the **** do I fix the dramatic battery drain problem that came about after installing 5.1.1?  Suggestions for fixing problems on iTunes did not work.

  • Bluetooth Mighty Mouse battery consumption

    I have a Bluetooth Mighty Mouse and have had it for 3 months (Christmas present). Last week, I noticed one bar had disappeared in the mouse battery life window in System Prefs - "wow" I thought "only lost 20% charge in just under 3 months".
    However, yesterday, I got a "Low Battery" warning and noticed that only two bars were remaining. A couple of hours later I got a "Critical battery level" warning and only one bar remaining.
    I don't use my mouse all that much - probably at most 6 hours per day (in short-ish intervals, turning it off in between) and I can't remember accidentally leaving it on. I'm using it with the two original AA batteries it shipped with.
    Is this normal battery consumption? I find it strange that from "Low battery" to "critical battery" would be a couple of hours and that it would suddenly lose almost 50% of its charge in a week.
    Do these mice eat AA batteries? Is it a good idea to get some rechargeables to use instead?
    Cheers for the help

    Hello thomasp:
    In answer to your question, the battery life of a wireless mouse is mostly dependent on usage. When not in use, the wireless devices go to a very low power mode. IMHO, it is a waste of time to turn mice/KBs off. I would postulate that your experience is about normal.
    I use rechargeable batteries (2500 mAh) in all my wireless devices. They do not last quite as long as the Lithium batteries - they have a lower voltage. However, I use an Energizer recharger that recharges batteries in 15 minutes - very little waiting time. In addition to being less expensive in the long run, rechargeable batteries are environmentally friendly! I bought a bunch of them on eBay. By the by, the rechargeables lose some charge every day - even if they are not in use.
    Barry

  • Can't use WIFI and the battery consumption goes much faster

    I can't use WIFI after my iphone4s was updated to ios6.0  and the battery consumption goes much faster, how to solve ?

    This seems to be a problem relatet to the current versions of the app. After uninstalling Spotify I installed an older version, 2.8.0.1081, which worked perfectly with wifi. No newer versions seem to work so I hope there will be a fix soon. I've tried changing the UPnP as well as NAT filtering settings, but the newer versions of the app still wont work.

  • I can't disable most of the apps on my phone that use high battery. Example google play services, Google search. Whenever I stop the apps they reappear again

    I can't stop most of the apps on my phone that use high battery. Example Google play services and Google search, facebook messager, weather. Please help.

    On some apps they'll  let you Uninstall them back to Factory setting but once you do that I would then go to your setting in the play store and check Do not Auto Update Apps"  that is what I have mine set too.. One thing to Not on that setting it will stay at that position until the PlayStore get an update itself once that o cures you have to reset the setting back to Do Not Auto Update Apps...

  • Continuously refreshing a tab after an interval leads to high memory consumption (400MB to 800MB in 30 seconds for 3 refreshes at 10 secs interval), why?

    Environment:
    MAC OSX 10.9.5
    Firefox 32.0.3
    Firefox keeps consuming lot of memory when you keep refreshing a tab after an interval.
    I opened a single tab in my firefox and logged into my gmail account on that. At this stage the memory consumption was about 400MB. I refreshed the page after 10 seconds and it went to 580MB. Again i refreshed after 10 seconds and this time it was 690MB. Finally, when i refreshed 3rd time after 10 seconds, it was showing as 800MB.
    Nothing was changed on the page (no new email, chat conversation, etc. nothing). Some how i feel that the firefox is not doing a good job at garbage collection. I tested this use case with lot of other applications and websites and got the similar result. Other browsers like Google chrome, safari, etc. they just work fine.
    For one on of my application with three tabs open, the firefox literally crashed after the high memory consumption (around 2GB).
    Can someone tell me if this is a known issue in firefox? and is firefox planning to fix it? Right now, is there any workaround or fix for this?

    Hi FredMcD,
    Thanks for the reply. Unfortunately, i don't see any crash reports in about:crashes. I am trying to reproduce the issue which will make browser to crash but somehow its not happening anymore but the browser gets stuck at a point. Here is what i am doing:
    - 3 tabs are open with same page of my application. The page has several panels which has charts and the javascript libraries used for this page are backbone.js, underscore.js, require.js, highcharts.js
    - The page automatically reloads after every 30 seconds
    - After the first loading of there three tabs, the memory consumption is 600MB. But after 5 minutes, the memory consumption goes to 1.6GB and stays at this rate.
    - After sometime, the page wont load completely for any of the tabs. At this stage the browser becomes very slow and i have to either hard refresh the tabs or restart the browser.

  • Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers.

    Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers

    Hello!
    I recently just downloaded the 'Waze' app as a backup for my Garmin. I've read a few reviews that seem to rant and rave about how good the GPS app is. It is community driven and maps are constantly being updated by users. Plus it has a few other fun stuff in it (something similar to Gasbuddy where you can owe prices on the map). But like the person above me said, there is lots of useful free GPS apps in the App Store.
    Oh and I may be wrong but I remember reading an article about Google being slower about updating its maps system--ie no turn by turn voice, which many people have had complaints about.
    Happy Searching!
    Ps - if you switch I wouldn't go to Blackberry.

  • Insane battery consumption when Push is activated

    Is there something wrong with my phone, or is the battery supposed to be drained REALLY fast when Push is activated?
    For some reason, the "Usage" counter will keep counting even though phone is not in use:
    Usage: 7 hours 51 minutes (was really only 3 minutes)
    Standby: 19 hours, 45 minutes.
    Battery left: About 40% (was 100%)
    The phone has laid untouched and locked (screen off) all the time, except maybe 3 minutes.
    3G is OFF
    Wifi is OFF
    Autolock: 1 minute
    Exchange Push is ON (less than 100KB of mails were received)
    I've had a phone with Exchange Push feature before (HTC), and battery consumption was not anything near this...
    When i turn off push, battery is just fine, and usage counter is correct.

    For what it's worth, I have this same problem with MobileMe account....reloading settings does not fix that and I set my phone up from the ground up first time round.
    PUSH OFF = reasonable battery useage, even with all the other battery draining features on
    PUSH ON = loads of usage, even with phone unattended and battery that needs charging every 24hrs at least.

  • [solved] Nautilus - high power consumption

    Hello,
    Can someone reproduce a very high power consumption with nautilus?
    It keeps running although I have closed all windows and causes an enormous power consumption. This is what powertop reports:
    4.67 W 942.2 ms/s 0.00 Process nautilus --new-window /home/orschiro/Downloads
    I am running nautilus 3.8.2-1.
    Last edited by orschiro (2013-10-09 12:29:32)

    Hung thumbnail process? Can you try disabling thumbnails in Nautilus and see if this happens? Close all Nautilus' processes after making the change.

  • Lenovo s820 battery consumption by radio

    My s820 suddenly started to consume too much of battery. on checking battery consumption hardware is showing around 49% used by radio. I never use radio still all the time hardware shows radio consuming battery for all the hours phone is on. I have done everything including factory reset but problem is sill unresolved. please help. 

    Hi
    ''on checking battery consumption hardware is showing around 49% used by radio. I never use radio still all the time hardware shows radio consuming battery for all the hours phone is on.''
     Dosen't refer to the FM Radio ! That is the radio the cell phone uses for phone calls and data, it has to be on. If you turn it off (put the phone in Airplane mode)you will not be able to receive/send phone calls or 3g data.If you do not expect to use it for phone calls or 3g data, you can turn it off (Airplane mode) and use wifi just for data. But text messages, 3g data, and phone calls will not work.
    Hope this helps.
    Regards.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for

  • Unable to install SQL server 2012 on windows 7 64bit

    Overall summary: Final result: Failed: see details below Exit code (Decimal): -2057043966 Exit facility code: 1380 Exit error code: 2 Exit message: There was a failure to calculate the applicability of setting ALLINSTANCES. Start time: 2015-03-17 21:

  • Error occurred in deployment step 'Uninstall app for SharePoint': The remote server returned an error: (502) Bad Gateway.

    Installed SP 2013 Foundation in my Hyper-V machine Created and done all the steps mentioned here http://blogs.msdn.com/b/shariq/archive/2013/05/07/how-to-set-up-high-trust-apps-for-sharepoint-2013-amp-troubleshooting-tips.aspx && http://msdn.microsof

  • External HD not showing up on Desktop

    I've been using a WD 500gb Firewire HD for my Time Machine backup for some time now without problem. Just noticed that the WD disc is not showing up on my G5 iMac Desktop and the last backup was on March 8. I've tried unplugging the WD drive, disconn

  • How can I get nav states for a widget?

    I've made the katie's cafe tutorial till "easy with widgets". I've tried what I've learned in a site of my own, I've placed the widgets in the site and I don't see graphic styles, paragraph styles nor states of the widget! I've tried also with the ot

  • Spotlight and Time Machine

    According to my console log file, Spotlight is having trouble with my Time Machine volume Jul 1 18:48:25 StevesiMac mds[34]: (/Volumes/Time Machine Backups/.Spotlight-V100/Store-V1/Stores/9A15E9F6-D06F-4FB8-9841-7691A1A7A2A8)(E rror) IndexCI in openi