High brightness and low colour of display

HP Pavilion 15-n208tx Notebook PC (ENERGY STAR)   ,high brightness and contrast for normal display setting so that colour is very less and some items like folders are not clear, Whats the solution

Hey harikottayam,
Thanks for the updated information.
I understand that you are using the default settings, but can you tell me if you are able to adjust the settings to your personal preference?
You can find the steps to do this here: Changing the Visual Appearance of Windows 8.
The default settings for a display are not always perfect for every user, which is why the ability to adjust resolution, brightness, contrast, etcetera, are a standard feature of any display.
If you are unable to adjust the display, or it is still poor quality I would suggest contacting HP Phone Support for service options. You're notebook is new so it should be covered under the factory warranty. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
Hopefully this helps.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Similar Messages

  • Bug: Letterbox effect gives unwanted high brightness and low contrast

    When I apply the Letterbox effect, it looks good in the preview, but the result is a barely visible clip, all whited-out, letterboxed but with extremely low contrast and high brightness (applied to the whole screen, including the black letterbox bars). Some other effects, like Fog and Aged Film, produce the same unwanted results.
    What's going on?
    I am using iMovie HD 6.0.2 on a MacBook. Any help is appreciated.

    Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
    My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
    https://devtalk.nvidia.com/default/board/98/

  • Whats the difference between high-density and low-density ram?

    I bought what I thought was supposed to be a cheap 256 mb chip (pc100 or 133) but the g4 400 read only 128mb, The fellow in the store that sold it flipped out when I told him I had a Mac and said something about high density and low-density.Another guy in the store described it as being one sided and two sided.
    I don't know what my machine needs. I got my money back but he would'nt let me exchange the chip for another, me thinking it was simply mislabeled.

    The QuickSilvers use PC-133 SDRAM and are compatible with high-density memory chips (256 Megabit), so that 16-chip 512 MB and 8-chip 256 MB non-ECC DIMMs are supported. A low density, 16-chip (128 Megabit) 256 MB DIMM is also supported.

  • High bytes and low bytes?

    What are high bytes and low bytes? Thanks for helping.

    This may not be enough information to answer your question. How and where are the terms High bytes and Low bytes used?
    Often, a data type is represented using multiple bytes. For example, short is 2 bytes. Sometimes the most significant byte is the high byte while the least significant byte is the low byte.

  • High level and low level grabs

    Hi, I'm looking at different acquisition options. Fast acquisition is a priority as is fast processing. I'm a little confused on high level versus low level. Is there any benefit to which one is used? Or is it 6 one way and 1/2 a dozen the other. Thanks

    If you feel comfortable using the Low Level functions I would personally recommend using them instead of the High Level. Bruce's answer is correct, high level will call low level with standard options selected. If you think of ways to improve the speed of your code, you may want to use low level, my reason is because high level VIs will actually be a function call calling other functions, which introduces a minimum delay, instead, if you use low level you are directly calling the functions for acquisition so there is kind of a small time saving if you think of it as acquisition wise.
    Also, the high level VIs if you check their block diagram it has more structures for error checking, session ID checking, etc., so with low level you have direct control over the acquisitio
    n from your main program without introducing innecessary structures or functions.
    Regards,
    Nestor Sanchez
    IMAQ/Motion Support
    National Instruments
    Nestor
    National Instruments

  • Saved passwords although upper and lower case when displayed in the list of saved passwords transfer to the appropriate location as lower case only.

    running windows 7 64bit pro
    Geico website is the only place where we have upper and lower case user name
    current version firefox 6.0.2

    Make sure that you haven't saved Uppercase and Lowercase versions of that name and password.
    Remove saved Password(s):
    * Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    See also Password Manager:
    *http://kb.mozillazine.org/Password_Manager

  • Is it possible to create a script to produce a high res and low res pdf and jpeg from Indesign at the same time

    Hi, I'm just wondering if there is a way to automate a long process I have to do to create assets for my job.
    I have a single page InDesign 6 file which I have to output three ways:
    A low res pdf without bleed or trims
    A high res pdf with bleed and trims
    A low res jpeg downsized to 2% of original size.
    If anyone knows if this is possible I'd love to hear from you.
    Thanks in advance

    Automation requires creating your own IDML script for output. Scroll down on this page to the section on Scripting resources. The text is a bit confusing. It says InDesign CS5 Scripting resources, but then the paragraph for that section says the PDF files are for CS6. I haven't read through these, I just found them by searching for "indesign automation". It does say in part that is can be used for preparing files for printing, so once you figure it out, it should be a single click option to do all three steps.
    You can do them now with the menus you have, assuming you also have Acrobat Pro installed. With any document open, choose File > Adobe PDF Presets, and choose either from the prebuilt defaults, or create your own in the Distiller. However, I don't see a way in the Distiller settings to choose whether or not to include bleed and marks, so I'm not really sure how you'd have them on for one and not the other. As far as JPEG output, that can be chosen under Export. You get a choice to set a resolution and JPEG quality level, but not a size, so the output will be the dimensions of the document.

  • High speed and Low Speed CAN

    Hi
    This is my first time to use CAN.
    I have LabVIEW  2010 and  LabVIEW FPGA
    I have NI 3110 Dual-Core Industrial Controller with Windows OS, NI 9157, NI 9852 CAN Low Speed Module and NI 9853 CAN High Speed Module to be used to monitor the CAN messages from an ECU unit.
    The connection is done as the following:
    ·         The High speed CAN is connected to the NI-CAN 9853 (Port 0)
    ·         The low speed CAN is connected to the NI-CAN 9852 (Port 0)
    ·         The baud rate of the 9853 is 500kbps
    ·         The baud rate of the 9852 is 50kbps
    ·         Both modules are set to “Listen Only”
    ·         “Module Clock” in both modules is set to 20MHz
    ·         CAN networks are 29-bit and 11-bit.
    My consideration is to read all the messages from both modules without losing any message. Below is a picture from the block diagram on the FPGA target, is this the best way to read CAN messages from both modules? Also, could you please suggest what is the best way to read the messages on Host vi?
    Unfortunately, I do not have the module right now to do some test, so that I cannot get the iteration time (“CAN Low Speed Loop” and “CAN High Speed Loop” show in the picture below), could you please tell how to calculate the iteration time needed for each loop depending on the above information.

    The way that you have proposed to use the CAN module to monitor the BUS is a bad idea.  We have a prebuilt driver that will do most of this work for you.  You will need to download and install the NI-CAN 2.7.3 and then you will be able to use the example finder.  In the example finder look for.
    The example finder is accessed through the Help menu.
    Jacob K || Applications Engineer || National Instruments

  • Script to save out PDFs in High Res and Low Res and name them accordingly?

    Hello
    I'm on Indesign version 9.1. I previously had a script for this and have since had my mac wiped and re-installed (big company rules). So, here I am asking if someone can help me again..
    Basically I have to create artwork and nearly every time I have to export it as a 150dpi LOW RES version and then a 300dpi HIGH RES version with time marks, bleed, etc.  I then end the file name with either LR.pdf or HR.pdf. I have presets for these and obviously, it's not the worst thing in the world having to scroll down menus, etc but this is maybe up to 50 times a day. I used to be able to select an icon on my desktop (or wherever) then I used Indesign scripting and automator on the mac to press a kay command and it'd open the document, then save it out as the two designated PDFs, then close it.
    Can anyone help me on this?
    I can probably search on here for the previous thread asked and the script given to me...

    Adding somthing like below to Script 2 pdf outputs?
    var myLayer = app.documents.item(0).layers.item("Background");
    myLayer.visible = true

  • Nokia Maps between high-end and low-end lumia devi...

    Hi! I was wondering if there is/are any difference (features, performance, and eetc.) between the Nokia Maps app installed on lower-end Lumia devices, say the 610, and high-end Lumia devices, say the 800?
    Solved!
    Go to Solution.

    Absolutely no difference at all in features / use of map data etc between the devices, my friend.

  • Iphone 3Gs high temperature and low batterie performance

    Hello,
    This is my first question here, so I'm sorry if I doing something wrong.
    About a week ago my iPhone 3Gs is demonstrating very high temperature, at any location (inside my pocket, over my desk e etc...) and situation (it happens even in airplane mode), not enough to a overheat warning dough. And his battery dies in about 1 hour, no matter what I do. I've done a recovery and its came back to normal for 2 days, but after that the heat and battery problem has returned.
    Could any body help me?

    xboxbmliphone wrote:
    ... I would just run the phone for a couple days without any apps, music, vids, just to make sure it still is working ok...
    Recommended!
    Hot phone and battery drain, cause of both together, is some hardware defect as a micro short-circuit (the phone dropped in water, as example) or an app who have a bug who let it eat all the energy (keep on localization services, as example).
    Let the phone hard reboot, too, to remove any crazy process left in.
    If you still have the issue with nothing running on (please make sure really nothing is on, neither background apps or itunes songs or anything else), most likely is hardware defect and you need service, as pointed above.

  • Need help, high ping and low speeds almost constan...

    Hello. Over the past 5 or so days my internet has been incredibly slow and I'd like some help.
    My houses internet has been incredibly slow for around 5 days, I've regularly been checking speedtest.net and we have been having ~300-600 ping, 0.5 download and 0.1 upload, this is much lower than usual. I'm not sure if you know what's causing this but any advice would be greatly appreciated to help us get back upto speed!
    If you need any information (stats etc) just link me to what I need to do and I'll post it!
    Thanks, Josh!
    Solved!
    Go to Solution.

    Or this - 
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 06:16:51
    Downstream:
    6.813 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    4.9 dB / 23.0 dB
    Line attenuation (Down/Up):
    43.4 dB / 25.0 dB
    Output power (Down/Up):
    19.9 dBm / 12.1 dBm
    FEC Events (Down/Up):
    0 / 1
    CRC Events (Down/Up):
    926 / 11
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    2011 / 0
    Error Seconds (Local/Remote):
    798 / 9
    Hide details

  • Which configuration is better: higher GHz and lower RAM or lower GHz and higher RAM?

    I want to buy a new iMac. If all other factors are the same, including price, which configuration is better?
    21.5" iMac (late 2012) $1699
    3.1GHz Intel Core i7 Quad-Core
    8GB of 1600Hz DDR3 RAM
    --vs--
    21.5" iMac (late 2012) $1699
    2.9GHz Intel Core i5 Quad-Core
    16GB of 1600Hz DDR3 RAM

    A faster CPU gets the work done faster.
    More RAM deals better with large chunks of work (= large files) and multitasking (more apps open simultaneously).
    Fusion Drive is a an acceptable compromise to get the speed of SSDs and the affordable space of HDDs for as long as SSDs in the total target size are so astronomically expensive.

  • High level user and Low level user

    Hi to all gurus,
    How SAP diffrentiates between high level user and low level users?? I mean if the licences are for 25 high level user and 50 lowevel users, than how SAP will categorize the high level and low level user licenses?? Is there anyway where BASIS person has to specify??
    Thanks and Regards,

    Ask your SAP Account Manager, he will be happy to explain it for you.
    Regards
    Juan

  • High Cohesion and a dash of Low coupling

    I have two classes.(well there more but i will use two to explain my problem)
    Items are processed one by one, by class1, as soon as an item is processed it is sent to class2 for futher processing. Class2 contains queues which stores items sent from class1 while they wait to be processed. I have implemented this, however my problem is as follows:
    There is a need for a 'routing system' class which recieves items (one at a time) from class1, works out the shortest queue lenght in class2 and then sends that item to that queue.
    The biggest probelm is that the class must be able to handle different situations. E.g able to handle any number of queues, etc.
    (Some may be thinking why don't you just write this as method inside class2. The answer is that this 'routing system' is going to be used by the whole program, so it must be made available to all classes without the need for)
    Basically High Cohesion and low coupling is the key and this is the reason why I find it difficult to implement this class.
    Can anyone help, Thanks.

    My suggestion would be to put a manager on top of the queue-set.
    So, for a given set of queues, there is a managing-thread that 'receives' the input (output from a prior op) and also responds to the dequeue operation. There are plenty of article on multithreading with multiple producers and multiple consumers. Just use a singleton for the manager.
    http://www.google.com/search?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=Java+Multithreading+multiple+producers
    http://archive.devx.com/sourcebank/details.asp?resourceNum=123662

Maybe you are looking for