High CPU & GPU temperature with ATI 4870 Graphics card

Hi I have replaced the original FX1700 card with an ATI 4870 on my S10 and I found the GPU temperature constantly floating at around 58C with no program running and the temperature of the CPU have also gone up to 47C with no programing running and 58C with program running(The temperature of the CPU was fine at under 40C before ATI 4870 was installed). Is this situation normal?
P.S. I have not replaced the orginal fan came with my S10.
Thanks very much for your helps
Solved!
Go to Solution.

Hi Erik you are truely intelligent I have tried the method as you suggested and now the temperature of CPU and GPU came down to 45C and 56C at idle respectively. That is really a dramatc improvement thanks very much!!!

Similar Messages

Replacing Intel hd Graphics card with ATI Radeon Graphics card

Hi, I am using an hp G62 b51SI notebook with an intel hd graphics card. However, am thinking of changing it or supplementing it with an ATI Radeon Graphics card for increased gamiing performance. Is it possible to do so?
This question was solved.
View Solution.

Hi:
Below is the link to the service manual for your notebook.
http://h10032.www1.hp.com/ctg/Manual/c02542102.pdf
The supported motherboards with HP part numbers can be found in chapter 3.

H520 with ATI Radeon Graphics card

I have an H520 (with a 700W replacement supply) with i7-3770 CPU running Windows 8 that does not recognize the ATI Radeon HD 7790 card that I've installed. If I set the BIOS to IGP as the default display device I can view Device Manager using the onboard graphics port, which only shows the Intel onboard graphics. Running the ATI Catalyst driver manager fails since it does not see the 7790.
If I set the BIOS to AUTO or PCIe I do not get any display on either the onboard or the 7790 graphics ports, so I have to physically remove the card to allow the machine to boot up again to use the onboard graphics by default to see the display again. The sequence for AUTO prioritizes the PCIe display first according to the BIOS description, so apparently the onboard display does not get activated for this BIOS setting when the 7790 is installed.
As described in some other graphics card posts, I tried setting OS Optimized Defaults to disable but this had no apparent effect.
BIOS is Rev ESAKT23A.
I've tested the 7790 on an old computer and verified that it is working.
How can I get the 7790 to be recognized on the H520?
Solved!
Go to Solution.

After making your proposed changes I had a failure to boot with an error 1962, which I believe was due to Boot Mode = Legacy, but the good news is that there is now an output from the Radeon HD7790 with the following BIOS settings:
Display=AUTO
Secure Boot=Disabled
CSM=Enabled
Boot Mode=Auto
Boot Priority=Legacy First
OS Optimized Defaults=Enabled
Thank you so much neokenchi, this problem has been haunting me for a couple of days!

PC with ATI X1900 Graphics card - Can't drive my 23" Apple display

I recently assembled new PC with A8N-SLI mobo and ATI X1900 All-in-Wonder card (with DVI-I out) driving a new Apple Cinema 23" display. I've not been able to get the display to come up on boot except for a few occasions when I disconnect and reconnect the ADC cable to the power supply after boot. I'm guessing this problem has to do with mixing Apple and PC (OK, it was a gamble).
Any ideas on how to get this combination working?
Thanks.
HD 23" Cinema display Windows XP

OOPs all. I looked at the other posts and see my answer.
Thanks anyway.

Photoshop CS3 allows me to enable Open GL but CS4 does not Brand new MacPro with ATI 4870 card

Hi,
I just bought a brand new 8 core Mac Pro and have both the ATI 4870 graphics card and the Nvidia GT 120 card. Pshop CS3 allows me to "enable openGL" in the prefs and utiizes it when doing 3d stuff... however, CS4 has it dimmed in the prefs, thereby not allowing me to check it (it is dimmed and unchecked I should say) and when I do 3d stuff a dialog box saying
"Your video card does not meet the requirements for hardware-accelerated 3D rendering. All 3D will be rendered with software only."
any thoughts?
thanks in advance.

yeah, short term test deems keeping both cards in.
So, here are the results: Notes: I have 2 monitors, an Apple 30" and Apple 23". The 30" can only be used in the dual link dvi port and NOT the Mini Display port. Second: The ATI 4870 seems to have an issue with the Mini Display port, it does not work, alone or in tandem with the dual link dvi port being used. Apple is replacing the card (heretofore, I had no cause to use the Mini Display port on the 4870 at all) Third: Only Photoshop CS4 extended was used to see if the card was detected and if it had enabled Open GL
ATI 4870 - dual link used, Mini Display NOT used: Photoshop sees the card and enables Open GL
ATI 4870 - dual link used, MIni Display used: didn't test because Mini Display port did not work.
ATI 4870 - dual link NOT used, Mini Display used: didn't test because Mini Display port did not work
Nvidia GT120 - dual link used, Mini Display NOT used: Photoshop sees the card and enables Open GL
Nvidia GT120 - dual link used, Mini Display used: Photoshop does not see the card and thus Open GL is NOT enabled.
Nvidia GT120 - dual link NOT used, Mini Display used: Photoshop does see the card and Open GL is enabled
ATI 4870 Dual link used, Nvidia GT120 Mini Display used: Photoshop does not see a card and Open GL is NOT enabled.
ATI 4870 Mini Display used, Nvidia GT120 dual link used: did not test because ATI Mini Display port did not work

Is there an utility for monitoring cpu/gpu temperature and fan speed for desektop m9200T?

My desktop computer m9200T running Win7 Home Premium crashes often. It seems to be temperature related.
I had tried SpeedFan, but my computer crashed everytime I ran it. SpeedFan window scrolled 20 some lines of text than the computer crashed. Is there an utility for monitoring cpu/gpu temperature and fan speed for desektop m9200T?
This question was solved.
View Solution.

Hi,
Only have one temperature monitoring application running or you could end up with erroneous readings.
Try PC Wizzard. Depending on your hardware, you should see temperatures for CPU, GPU and disk. At the same site you can also try HW Monitor.
I am running a custom motherboard and it comes with its own software for this purpose. HW Monitor seems fairly complete.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Please help :) Error Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0.

Hi All, if anyone can help me fix this error I will be most aprreciative.
I get this error when I open After Effects.
Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later. For now, ray tracing will use the CPU.
After installing CUDA 5.0 or later, restart your computer.
For more information see: http://www.adobe.com/go/aeraytracegpu
Im on a MAc Pro Desktop running latest OSX (OS X 10.9.2 (13C64) and a
Graphics Card: ATI Radeon HD 5770 1024 MB (not a NVIDIA its AMD)
I have tried updating software and the operating system as this is now what recent OSX versions do apparently. Not downoloading the driver software as AMD only support up to the previous operating system.
Kind Regards Toby.
Motion Designer / Editor

I have this warning come up, too. And when I close it, the program crashes. I can't get it to work without it.
I use Photoshop CC and that works fine.
I'm running Windows 8.1(more info below). I've tried to read for solutions in forums but none of them provide any.
Some have said they figured it out but don't say how, another said he re-installed Windows?
Any help is appreciated!

Does the fan on Macbooks with Nvidia Geforce graphic cards run less often?

I have a Macbook Core Du0 1.83ghz running 10.6.3. Each time I watch a video on youtube or watching Flash or other multimedia animations, my fan run super fast.
Is it the same with the new Macbook with the Nvidia Geforce graphic card?
Does the fan on Macbooks with Nvidia Geforce graphic cards run less often?

Watching videos taxes the GPU and CPU. That's why the fan runs faster - to cool the computer. When you aren't doing much the fan slows down. This is true of all the laptops regardless of which GPU is involved.
Since you have the first generation MB model, it runs hotter than later models that incorporated some changes to the cooling system making the fan run faster during idle. You can accomplish a similar result using the third-party fan control software, SMCFanControl - VersionTracker or MacUpdate. It can be used to increase the fan's idle speed to 2000 RPM. This won't make the fan run any slower when the computer heats up.

PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver. Deleting bad driver file in adobe program data does not fix the problem, it simply replaces the text file and crashes again. My video driver

PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver. Deleting bad driver file in adobe program data does not fix the problem, it simply replaces the text file and crashes again. My video driver is just fine. Any help out there?

rb
Your video card driver may be fine for something, but just not compatible with Premiere Elements 13/13.1.
For those with the display card error, the answers include
a. assure your video card/graphics card driver version is up to date according to the web site of the manufacturer of the card -
if necessary consider a driver roll back.
b. determine in Device Manager/Display Adapters if the computer is using 2 cards instead of 1
c. delete the BadDrivers.txt file
the rationale for that deletion is found in post 10 of the following older post...principle applies to 13 as well as 9.
Re: Premiere Elements 9 Tryout Serious Display Problem
Have you looked for computer ATI card settings that might be more compatible with Premiere Elements 13/13.1?
When is the program crashing - just opening a new project or rather crashing if editing a particular video format at the Timeline level?
ATR

Help with installing new graphics card

Hi I have a 3 year old hpe575a (hp pavillion)
Intel i7 2600, 8gb ram
Orginally had a ati hd radeon 2gb (not sure what model)
in it
after 2 years the radeon finally melted ( always had overheating problems in the australian summer )
so I bought a nvidia gtx630m which had the same connections and power requirements and connections as the radeon
I csnt seem to get it working, despite the card powering up, and loading the splash screen it doesnt go any further, I can get to the network boot screen or the hp splash screen but no further, and I cant find any bios updates for my mptherboard (pegatron) so do I need a new motherboard? The computer works 100% fine without the new graphics card
Should I get a new motherboard. Or graphics card? which would be cheaper? or is there someway to get the current system to work with the new graphics card? thanks -zac

Hi,
The existing card is an "AMD Radeon HD6570 (2 GB)". I don't know how you can fit a Nvidia GTX630M to your machine because this card is for laptop:
     http://www.geforce.com/hardware/notebook-gpus/geforce-gt-630m/specifications
Probably you are talking about the following card:
    http://www.geforce.com/hardware/desktop-gpus/geforce-gt-630/specifications
The card should be able to use 300W PSU on your machine (no need new PSU). My suggestion:
(a) Update BIOS to the latest one, please check, should be "Version7.15 Rev. A" the motherboard is Cleveland
     http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-101150-1&cc=us&dlc=en&lc=en...
(b) Install driver for new card
Hope this helps.
Note: Autumn now but still hot isn't it ?
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Notebooks HP Notebooks amd display adapter and ati radeon graphics cards stopped working

I have a 2000-21DX9 Notebook and keep getting messages solve issues with AMD display adapte and ati radeon graphics cards they stopped working. When I open the action center to solve the issue It says "Computer unable to download the solution at this time. Why won't it work and how do I fix it?

@pp62
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Can I change AMD 6490 with a nividia graphic card in a DV6 6129sl?

Can I change AMD 6490 with a nividia graphic card in a DV6 6129sl?
dual boot Windows 7/ Debian
I'm tired of this RADEON.It's terrible with both Windows and even more with linux.
I also regret having bought a HP.
If I could change it with a Nividia, configure the driver for linux is much easier and no blue screen on Windows.
Mary

Hi, Mary:
Your notebook does not have any removable/replaceable graphics 'cards'.
The GPU's are chips which are soldered to the motherboard and cannot be upgraded, or replaced.

Please help ... Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later?

Hi there,
I'm have a bit of an issue with After Effects and Premiere.
After Effects:
Keeps asking for Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0
Premiere crashes unexpectedly
Can someone please help
Much-ly appreciate

Hi there,
Sorry took a while to get back to you guys. I have been having some issues with Premiere and Aftereffects CC.
I recently bought an Apple Pro CTO - Intel Xeon E5 3.7 GHZ Quad-Core with 10MB of L3 Cache, 32GB (4x 8gb) 1866MHZ DDR3 ECC DDR3 RAM, 1TB PCIE-BASED Flash storage, DUAL AMD FIREPRO D500 GPUS with 3GB of GDDR5 VRAM, DUAL Gigabit NIC, 802.11AC, bluetooth, 6x thunderbolt2 ports, MAC OS X.
Issue 1 - Aftereffects CC
Ray-tracing o the GPU requires an approved NVIDIA graphics card and CUDA 5.0
Issue 2 - Premiere CC
Warp Stabiliser wasn't stabilising correctly and now doesn't work at all in premiere CC. I even tried to link to aftereffects but it still doesn't stabilise the shots correctly.
I use to operate PC before with Adobe CS6 and I didn't get any issue stabilising.
If you guys can point me what's the best way to get it to work correctly that would be magic.
Look forward to hear from you
Regards,
Jean-Eddy Moutou

Problem with my amd graphic card

Hi.. I have a problem with my amd graphic card.. The card is amd radeon 6770m.. I did format on my laptop and when I tried to install the catalyst center which includes the driver, it displays a message which say that catalyst center stop working... I have downloaded all the versions of the driver since 2011 when I bought the laptop... But I have the same problem whichever version I try.. I also have updated the bios to the last version but nothing happens..I think maybe graphic card is broken.. Thanks for reading..

Hi @Lefteris93 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your I would uninstall all the software and drivers for AMD High-Definition (HD) Graphics Driver and Catalyst Control from the control panel and the Device manager. Restart the notebook and download from here.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. This will help update the drivers that have been installed on the Notebook. If you graphics card was damaged or not functioning you would have a black or blank screen.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How do I get Windows 8 to function with my Iris Graphics card?

Hello!
I have a late 2013 Macbook Pro retina with 8 GB of RAM and Iris graphics card.
I am having a problem in WIndows 8 64 bit (I'm using bootcamp 5). It seems as the Windows 8 doesn't work properly with the Iris graphics card. Under display adapter information it shows only 32 MB of dedicated video memory. And I only want windows on my mac because of occasional video games. No games run with 32 MB of video memory. And it seems that windows drivers are correct because it recognises the Iris 5100 graphics card...
I tried reinstalling bootcamp drivers and went to Intel's website for newer versions of Iris drivers but nothing helped. Is there a way to allocate more memory to the graphics card or some other solution?
I would really appreciate help on this.
I attached a screenshot of the display adapter information panel in windows 8.

Dedicated is how much physical memory it have software cant change that its the same deal in osx

High CPU & GPU temperature with ATI 4870 Graphics card

Similar Messages

Maybe you are looking for