High CPU in 2960 when not logged

Hello,
I've noticed a strange behaviour in my 2960s regarded to CPU.
CPU level is very high, 70-75% when nobody is logged by vty or console, but it drops drastically to 40% when sombebody logs in. I've been able to discover that this is due to CPU interrupt level, as it shows the output of sh process cpu sort 5sec, just logged in.
RH0A01-SW1-10G#sh proces cpu sorted 5sec
CPU utilization for five seconds: 68%/37%; one minute: 67%; five minutes: 50%
...Some seconds after logged in...
RH0A01-SW1-10G#sh proces cpu sorted 5sec
CPU utilization for five seconds: 35%/11%; one minute: 52%; five minutes: 48%
Does anybody knows the reason for this?
Thanks!

There were critical HIGH CPU bugs with the 12.2(58)SE and SE1 as well as 15.0(1)SE and SE1.  Cisco has managed to  "fix" the issues with the respective SE2 releases BUT now you'll see the cosmetic bug after that.  The cosmetic bug will show that you still have HIGH CPU but that's just it.  It's cosmetic.
If you ain't running the IOS I've mentioned above, what is the complete IOS you are running?

Similar Messages

  • Using Shared Libraries When Not Logged In

    Is there a way I can use a shared library from my laptop when not logged into my iTunes account on my main computer? It kind of defeats the purpose if I have to have both iTunes running.

    Yes, I'd like to be able to access my shared library from my laptop. I'd like it to function so that my home PC (which has the original library on it) does not have to be running iTunes. For times when I'm logged off or not running iTunes (because it uses a lot of the computer's memory, and other users find it quite annoying).
    I'd just like to know if there are any third-party mods, software, or any other option to perform this task.

  • Login row in my header, when not logged in

    I wish to use the feature that some site use where the login
    box is show in the header or some other place on the page while
    they are not logged in and when they do login the box is not show
    anymore.
    i wish to have this as an extra table row in my header file.
    i have tried to do this and it does not seem to work ok, i
    would send you my files but it might be easier if you know of a
    better way as this is better than maybe trying to fix my mistake?
    i need this so i can use it like this.
    somepagename.php
    <? // somepagename.php
    include("header.php");
    if ($_SESSION['auth'] = "yes") {
    echo("protected page");
    include("footer.php");
    ?>
    then the header.php file is...
    <? // header.php
    if !$_SESSION['auth'] = "yes" {
    ?>
    <form name="form1" method="post" action="">
    <div align="center">user name
    <input name="username" type="text" id="username">
      password 
    <input name="pass" type="password" id="pass">
    </div>
    </form>
    <?
    ?>
    this is a brief description of what i am looking for, but i
    am not getting very far.
    thank you for any help

    Hi, drhalm. 
    Thank you for visiting Apple Support Communities. 
    This sounds like your music is not stored locally on the device and accessing your purchases in the cloud.  There is a new feature in iOS 7 that shows all purchased music and requires and Internet connect to play this content.  You can download any missing media via the steps in the first article below.  If the media is located in your iTunes music library, you can sync the media from your Mac to your iPhone.  If unfamiliar with the process, I have included the steps in the second article below. 
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/ph12113
    Cheers,
    Jason H. 

  • Hardware Configuration in MAX when not logged in as Administrator

    I am attempting to load a .cfg file for a VME device through the Hardware Configuration option on MAX.  When you are not logged in as an administrator, the option is greyed out.  I do not have the option of always running this as an administrator.  However, I can set special permissions on certain folders or registry keys if necessary to allow non-administrators access to those locations in order to get the hardware configuration to work in MAX.
    Does anybody know what special permissions would need to be set?

    Hi Pual,
    What operating system are you using? I’m not sure if there are additional specific files or registry keys, but could you give your use full control over the Measurement and Automation Explorer program?  Let me know if you can test that out.
    Matt
    Applications Engineer
    National Instruments

  • Brand new to Mac, does TM backup all users files, even when not logged on?

    Hi Im brand new to Mac so please be gentle with me!!
    Im about to use TM for backup, I have an account and have made one for my wife, as we both have an iPod and so Ive herd its easier to use 2 accounts.
    She wont be logged on much, so if when Im logged on does TM backup the whole HDD, rather than just the user that is logged on?
    if not how does it work to backup everything? do you have to keep logging on?
    cheers

    I have no idea what question the Apple person THOUGHT he was answering, but Time Machine backs up changes for everything in /Users (i.e., for all accounts) whether or not an account happens to be logged in at the moment. Just tested and confirmed.
    THE TEST:
    My Powerbook has an Admin account a Standard account and the Leopard Guest account.
    I Restarted the machine, logged in as the Admin account, and turned off System Preferences / Time Machine. I then created a Text Edit file on the Desktop.
    In Time Machine I verified that this file was visible in the current view of the Desktop but not in the immediately prior backup.
    I then logged out of the Admin account and logged in as the Standard account.
    I turned on System Preferences / Time Machine and did a Back Up Now. I then turned off System Preferences / Time Machine again to insure no further backups might happen.
    Of course the Standard account can't see into the Time Machine backups of the folders from the Admin account, so I logged out of the Standard account and logged in again as Admin.
    Looking in Time Machine, I now see the Text Edit file both in the current view of the Desktop and in the backup just completed by the Standard account.
    I turned System Preferences / Time Machine back on, and deleted the test file. Looking again in Time Machine, the test file is no longer in the current view of the Desktop, it IS in the immediately preceding backup (the one that the Standard account initiated), and is not in the backup prior to that.
    END OF TEST
    This makes perfect sense since the file system event logs don't care whether a user is still logged in. Nor would a Deep Traversal backup care.
    --Bob

  • How do you reset Admin password (when not logged in as Admin)??

    Here's my predicament. I set up 3 accounts on our laptop - one for me and my wife (Standard accounts) and a House Account as the only Admin. Now, I don't remember the password for the House Account, which serves as the Admin.
    I am trying to load new software, but it request administrative privileges. To make matters worse, when I try to install the MAC OSX startup disk (like the help manual says you should to reset the admin password), before my computer will restart the startup disk, it asks me for the Admin password. Because I am not logged in as the Admin, I can't even restart the computer when prompted by the startup and install the OS again.
    Any suggestions or help with this issue?
    Eric

    Did you create an Open Firmware password as well? If not then just insert the OS X Installer Disc into the optical drive and restart the computer. After the chime press and hold down the 'C' key until the spinning gear appears below the dark gray Apple logo.

  • Annoying failures and reminders when not logged in as admin

    how can i stop apple software update (asu) from constantly bugging me when i'm not logged in as an admin?
    i like the automatic check (noone likes updating everything manually) but every apple program fails to install unless you're an admin. it would be much better if asu checked before it looked for updates, or let people know there are updates but they cannot be installed unless they are logged in as admin.
    what's worse is if it downloads an update and the install fails because you're not an admin, asu downloads the whole file again when you do log in as admin. these files should be cached in a temporary folder in asu's 'program files' folder until the install is successful or a newer version is available.

    freakin' awesome! of course, i never saw that scheduled task because it only shows when logged in as an admin, and apple is the only program i have that has its schedule there rather than in its own interface.
    now that i have seen this it seems stupid that so many programs don't have their updates scheduled there.
    i have not tested it as such but i have a task in my limited account that only runs when i'm logged on so i know that this will work. i also changed the schedule from a set time weekly to ‘at logon’ so it will actually get a chance to run.
    edit by online?:
    the scheduled task sets asu to run in the SYSTEM account but then asu seems to launch the installers with the locally logged on user's credentials, so this fixed my problem but not the underlying cause.

  • High CPU and Delay when applying metadata

    Hi All:
    I have an issue where my CPU hits 60% when applying keywords. This can be when I apply it to one image or to 100s. Obviously, when I have more pictures selected or more keywords, there is a much larger delay.
    Ideas from anyone?
    Thanks

    Hi All,
    There is a workaround to resolve this issue. As it is related to modifying registry, please be very careful and take backup of your registry first.
    The workaround is to set the value of "Disable Performance Counters" to 0 @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PerfProc\Performance
    If this registry entry is not present, create one. Meanwhile, we are working on fixing this issue.
    Hope this helps!
    Thanks,
    Deepika
    PS: Edit the Registry at your own risk. Inappropriate changes to the Windows Registry can disable the operating system! To safeguard against such an accident, back up your existing registry by choosing Registry » Export Registry File after launching the Registry Editor and before making any changes

  • Officejet 4630 printer makes high pitched whine even when not printing

     I just bought an Officejet 4630 printer for home use and noticed it makes an annoying high pitched whine whenever it's not sleeping, even when not printing.  Is not very loud, and would not be noticeable in an office environment due to ambient noise, but is obvious in a quiet home environment.  Is this normal for this model or is the unit defective?  Neither of my two previous inkjet printers made this noise.

    Hello,
    If your OfficeJet 4630 is within the standard warranty period, please contact HP technical support to speak to one of our agents who can troubleshoot and diagnose this issue.
    We look forward to your response,
    Best regards,
    Jeff Christopher
    Executive Customer Relations
    Hewlett-Packard Company
    Palo Alto, California
    I work for HP

  • ST03N shows users accessing transactions even when not logged in

    Hello all...
    We are trying to determine how many times a user executed a transaction during a specific period, and are using ST03N to do this. 
    We get the information fine, but it shows non-system users as having accessed transactions on days they are not logged in or it shows excessive use of a transaction (i.e 8000 times in a 20 day period). 
    We have confirmed that no batch jobs or system jobs are running or have run under their ID's.  Additionally, it shows use of transactions which the users are not authorized to use.
    Please help as we are trying to explain this for SOX purposes.
    Cheers all!
    Joe Johnson

    Thanks for the replies...
    We can use AL08, but it doesn't show any user activity for the specific users that keep popping up in ST03N.
    RFC calls seem to be closest to explaining this, but how can one track the calls made by a user?  Additionally, if the ID is not authorized to perform a transaction shouldn't the RFC call fail?

  • What Causes High CPU Usage Even When PC is Idle

    How can I fixed the high cpu usage on my pc?

    mcmillan wrote:
    rohankolay wrote:Right now i have kernel26-2.6.35.4 which i updated on 27 aug. That is around the same time the problem began.Should i downgrade it to kernel26-2.6.35.3 or kernel26-2.6.34.3?
    I think most people have been seeing the problems in any of the 2.6.35 kernels, so 2.6.34.3 would be my recommendation
    +1
    And put kernel26 in IgnorePkg.

  • IPhone using extremely high amounts of data when not in use

    I have a 4S on AT&T and am grandfathered in w/ the unlimited data plan. Last month I got the notification that I was in the top 5% of data users (which sounds crazy to me considering what some other people I've read about seem to use). According to AT&T's site I had used 2.09 GB with 16 days left in my billing cycle.
    Once I got that notification I logged on to see if I could find out when I was using such large amounts of data. It turns out between midnight and 1 am almost every night there was large amounts of data sent. I think this is strange since for two reasons, 1) I'm on WiFi at home in my apartment and 2) I wasn't even awake at the times these charges occurred.
    Example: January 6, 2012 at 12:40 am I was charged for 417,327kb, roughly 417MB.
    Similar data usage occurred almost every night going back to 12/28/11. On 12/29 I was charged for 468MB at 12:21am. Very unlikely this was actually data I used since I had work the next day and wasn't awake. It honestly looks like 80-85% of my data usage is coming from these occurrences. It also isn't likely that this is a total of data used throughout the day as there are other entries of smaller amounts spread out throughout the day.
    Now, if I was on a truly unlimited plan and there was no such thing as throttling I really wouldn't care about this. But the fact is that my 3G speeds are being throttled (just ran speed test at a location I used to get over 1Mbps and I am was at .07 Mbps). I have spoken to AT&T and they insisted it was an issue w/ my phone, either the hardware or the OS. So I went to apple and the "Genius" did a DFU restore for me in store and told me that would fix it. It hasn't and now I'm stuck with this constantly happening and unbearably slow 3G data speeds for the rest of the month.
    That was my last billing cycle where I was throttled down to download speeds of .07mbps. Unusable. This month I decided to closely monitor my data usage. I turned off iCloud and photostream, and turn off data whenever I'm using wifi. I turned off the sending info to apple setting.
    I checked my account on ATT.com today and noticed that yesterday morning at 7:58 am while driving to work I somehow used 247 MB. Don't ask me how, I'm not steaming anything and my phone is either locked or playing music from the iPod app. I could probably stream Netflix for 5 hours and not use that much data.
    I called AT&T to let them know (AGAIN) and got bumped up to a "Data manager" who was incredibly b*tchy and rude. She said there must be some app that's using that much data to update. I don't have any apps that are even that size so I don't see how this could possibly be the case. I tried to talk with her about how that can't really be the case and she just kept repeating that there must be some app using the data blah blah. I've gone to apple with this last month after failing with AT&T and at first they did a DFU restore and we restored the phone as new, then it kept happening so I went back they replaced my phone. AT&T said it must be a hardware or software issue last month, but this month it must be an app that's doing this. I can't get a straight answer from them and they just keep passing the ball to say it's Apple's problem.
    I really don't know what to do. I'm grandfathered in on the unlimited plan and don't really want to change that. Say I change my plan to the 3GB's at the same $30/month. What's to say this won't keep happening and I'll be over that 3GB's in 10 days then get charged an extra $10 for each additional GB?!
    I can't think of any apps I've downloaded in the past few months that would result in this change and I can't live with another 2/3 of my billing cycle being throttled down to unusable speeds.
    Has anybody else had anything similar happen? I have no idea what to do next (and sorry for the long rant but I'm fresh off the phone with AT&T and I'm ******)

    Thanks for the link. I only went through the last three pages and unfortunately it looks like there is no solution. I turn data off every night and turn it on only when I'm not in a wifi area. It seems that as soon as I turn it on, within an hour it charges me data for a backlog of whatever it didn't do when it was connected to wifi.
    I think it's absolutely disgusting that AT&T can just dismiss this and act like it's the users fault. Apps and email updating in the middle of the night to the tune of 400MB? I highly doubt it and then when I called to ask them about it they try to make me sound stupid like I have an app or two open. Just really ticked me off. The worst part about it is that there doesn't appear to be anything I can do about it aside from never using my data.

  • Report printing failure when not logged on as admin

    Using Business object XI,  I have a VB 2005 .NET app that works fine when logged on with admin privileges, but fails otherwise. I've investigated and traced this down a single line of code which is the  rep.PrintOut function.
    The debug error report is shown at the end of this message.
    Can anyone suggest a solution to this issue? Is it just a permissions problem and if so what permissions are required?
    Thanks,
    Steve
    System.Runtime.InteropServices.COMException (0x80047E5D): Failed to open the connection.
       at CRAXDRT.ReportClass.PrintOut(Object promptUser, Object numberOfCopy, Object collated, Object startPageN, Object stopPageN)
       at WinLabel.Form1.PrintManifestLabels(String strCust)
       at WinLabel.Form1.Button1_Click(Object sender, EventArgs e)
       at System.Windows.Forms.Control.OnClick(EventArgs e)
       at System.Windows.Forms.Button.OnClick(EventArgs e)
       at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
       at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ButtonBase.WndProc(Message& m)
       at System.Windows.Forms.Button.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

    Hello Steve,
    Thanks for the feedback.  Since this appears to be a permissions issue there's one other thing to check.  When the merge modules are installed there's often an option to install for "me" or for "everyone."  Make sure the files are being deployed for everyone.
    Here are links to some RDC and .NET documents as well as the Statement of Direction for the RDC. I'm not sure if you'll actually be able to pull them up though. Some documents require a login for the Service Market Place in order to view them.  Hopefully these will work without logging in.
    [Using the Report Designer Component in Microsoft Visual Studio .NET|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0751a7f-a81d-2b10-55a0-e6df0e1bab6d]
    [SAP Note 1217809 - Is the Report Designer Component supported in the .NET development environment?|https://bcp.wdf.sap.corp/sap/sapnotes/display/0001217809]
    [Crystal Reports Report Designer Component - Statement of Direction|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80bd35e5-c71d-2b10-4593-d09907d95289]
    I hope you're able to track down the permissions issue!
    Sincerely,
    Dan Kelleher

  • Retrieve Novell Username when not logged into Portal

    Hi,
    Is there a way I can store the users Novell username into a variable? This would be done in a report, displayed on the Portal homepage. I require this functionality before the user logs into the portal, so I can't use PORTAL.wwctx_api.get_user.
    Thanks

    Hi,
    IE is sharing the cookies between sessions.
    If you open IE and open another window by clicking <CTRL>+N or menu File >> New Window you have the cookies shared.
    If you open another IE by clicking on the IE icon you will have two seperate IEs which do not share cookies.
    Either you teach your users to use the "logoff" link in the portal header or code a new portal application that automatically destroys the portal cookie when the users leave the portal page...
    Hth,
    Michael

  • Error occurs when not logged in as admin

    I have service pack 3 installed which includes 1&2. I think my error is more in depth. We cannot give all users power user access either.

    freakin' awesome! of course, i never saw that scheduled task because it only shows when logged in as an admin, and apple is the only program i have that has its schedule there rather than in its own interface.
    now that i have seen this it seems stupid that so many programs don't have their updates scheduled there.
    i have not tested it as such but i have a task in my limited account that only runs when i'm logged on so i know that this will work. i also changed the schedule from a set time weekly to ‘at logon’ so it will actually get a chance to run.
    edit by online?:
    the scheduled task sets asu to run in the SYSTEM account but then asu seems to launch the installers with the locally logged on user's credentials, so this fixed my problem but not the underlying cause.

Maybe you are looking for