High CPU load after resuming from sleep mode

When my laptop resumes from sleep mode, LabVIEW 2012 starts to generate a very high and always constant CPU load (25%) without any VI running. I need to close all front panels to get back to the usual <1% CPU load level.
This behaviour spoils my carbon footprint and frequently eats up my battery. Any ideas what is causing this ?
Thank you,
Dirk

I'm guessing your issue may be related to this:
http://forums.ni.com/t5/LabVIEW/Why-is-using-100-of-a-CPU-1-out-of-8-when-it-does-nothing/m-p/242745...
Dirk@LV wrote:
This behaviour spoils my carbon footprint and frequently eats up my battery.
Thank you,
Dirk
Sorry about your carbon footprint, NI has a lot to answer!
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Similar Messages

Apple TV needs Restart for Airplay especially after resuming from Sleep Mode

1. I always have to restart my Apple TV for Airplay when I resume it from Sleep Mode. Neither my MAC not my PC nor my iPhone/iPad can connect to Airplay if it's not retsarted. I did a complete Factory Reset of Apple TV thinking it would be the best way of troubleshooting but in vein. Any help/suggestion/tips from anybody please?
2. Also - Does Apple TV needs internet always for Airplay? I guess that should work on the LAN even if there is no internet connectivity, Correct?
Regards,

Hey loftysub,
I'd check out the following article, it should be able to help you out:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Cheers,
David

Why doesn't my built in display re-initialize after resuming from sleep mode?

Hi,
I have a MacBook Pro (2.53 GHz Intel Core 2 Duo, 4 GB RAM) which I purchased a few years ago. I always have a secondary display monitor plugged in.
When I bought this system, it came with Snow Leopard and I recently upgraded to Lion. That's when this issue began:
If I physically fold the screen down and put the MacBook to sleep mode that way, often times when I resume my secondary display will return but my primary built in display will not - it just remains black. In some cases this creates a serious problem because my menu bar / dock are still on the main display and so I have no dock.
I notice the problem has not occurred if I put the unit to sleep using the Sleep command... but sometimes I forget.
I am wondering if anyone else is having this type of issue, and if there is a way to solve the issue? Is it possible this is a bug?
Thanks,
Steve

etresoft wrote:
It is definitely not a Leopard bug because it has been happening on every portable Mac I've ever had.
I don't agree. I had no problems at all with my MacBook Pro running Tiger. I initially did an upgrade from Tiger to Leopard and when the problems started I assumed it was a problem with the upgrade. I then completely erased and did a clean install of Leopard. The problem has actually gotten worse since I did the clean re-install.
etresoft wrote:
Just close the screen, wait for it to go back to sleep, then open it again. It will probably be fine.
As I mentioned in my opening post, I've gone through that song and dance more times than I can count. I've closed it, waited for as much as an hour, opened it back up...same problem. I've hard powered it down, closed it, disconnected the AC adapter, removed the battery, opened it, held down the power button for 15 seconds, re-installed the battery, reconnected the AC adapter, pushed the power button, and the display will still be dark. It's sometimes taken as many as 5 or 6 iterations of that process before it will finally reset whatever problem it was having and boot normally with a functioning display.

Screen is not working after resuming from sleep mode

Hello,
i got a problem with my ideapad u330 touch, after i got out of the sleep mode my screen will not come on, so I need to switch it off and back on again then it works fine.
I recently upgraded to win 8.1, i don't know if it has something to do with this, but before it works fine.
Thank you very much

hi McGuinness,
Are you able to recreate the issue if you boot in Safe Mode?
Things that you can try:
1. Press the Windows logo key‌ +R and type devmgmt.msc. On the Device Manager, navigate to the Display Adapter (right click > choose Properties) and on the Driver Tab, check if the Rollback Driver is clickable to restore the previous display driver.
2. Navigate to the Control Panel > Programs and uninstall the Intel display driver and reboot. Navigate to the D:\Drivers folder and locate the Intel Display driver installer (D:\Drivers\VGA\Intel) or download and run the file below to re-install the display driver.
Intel Video Driver for 64-bit Windows
Version 9.18.10.3165
After installing. Try to put the computer to sleep and observe (if the power button is blinking, this indicates that the unit is in sleep mode).
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

T60 Type 2623 Blue Screen on Resume from Sleep Mode problem solved - XP Pro

I hope that this post ends some frustrations for some people.
I hope that IBM deals with this issue by getting ATI to fix the video driver issue.
After three months of tracking down blue screens when resuming from Sleep Mode and some lockups while working, I have identified the problem on my T60 Type 2623 running Windows XP-Pro and all service packs and updates. The Sleep Mode resume issues were intermittant and it would be fine for a day or two and then reboot on Resume or reboot every time I used Resume for a while. For months the Blue Screen would reboot and attempt to send the message to Microsoft using the logs, but the logs were always corrupted. I disabled every driver that I could and the problem continued for months.
The problem solution came about when I decided to try my Rhapsody Music account after many months of not using it. I kept getting a message about DRM (Digital Right Management) being disabled and Rhapsody software could not self-fix this. So I finally called Rhapsody and they spent over an hour with me trying to get Rhapsody to work. The support person asked me about my computer and I noted that it was an IBM T60. He then asked about my Video Card and I responded that it was an ATI Mobility Radeon X1300. After a few minutes on hold he asked about my driver version which was 8.442.3-080103a1-057754C the set from January 31, 2008. He noted that there is a known problem wit the 8.4 driver and it interferes with DRM. He had me go to control panel Settings and Hardware and then roll-back the driver to the prior version.
After a reboot, the DRM issue was solved and I soon discovered that my resume from Sleep mode no longer crashed. In fact it has been fine and crash free for over a month now. I have noted that the older driver can sometimes resize my screen to something like 600 X 800 if I close the lid under certain circumstances, but that is just a function key reset to get my normal desktop resolution back. At least it is not a blue screen reboot with a corrupted log file.
Message Edited by retro74 on 07-05-2008 08:50 AM
Solved!
Go to Solution.

Unfortunately I could not fix the problem so I wiped my system and loaded all new drivers before I found this posting.
Is there a way to get the old ATI driver that works? The only one available on the ATI and Lenovo website is the latest one with the problem. I agree with you David, Lenovo should have fixed this problem already with ATI.
John

T440S OSD Brightness control failure after resume from Sleep

Hi,
I have owned a T440S since late 2013.
Relevant Details:
T440S
Model : 20AQCTO1WW
OS : Windows 7 professional (original installation by Lenovo)
Latest Drivers installed as of June 2014 - including HotKey and Power Management
HotKey ver : 8.30
Power Managment : 6.65.1
Since receiving this laptop, OSD birightness control has always failed to work, i.e. does not appear on the screen
when using the Fn+F5/F6 key combination nor does it control actual screen brightness AFTER FIRST resuming from sleep
mode.
Sequence of steps that demonstrates the above symptom:
1. OSD brightness works fine after reboot
2. Putting the machine to sleep (I do not use hibernate) for a duration longer than a few minutes
3. Open lid the first time, hit Fn to resume machine
4. Pressing Fn+F5/F6 key combo does not display the brightness slider nor does it control brightness
5. Closing the lid and opening it again, causes OSD brightness slider to flash brifely and is now fully functional
using Fn+F5/F6 keys
Your tech department should easily be able to re-create this issue on any stock T440S/Win7pro machine, as
I have seen others comment about this very issue across other T440/OS variants.
This very same behavior has been there since the beginning.
When is Lenovo going to FINALLY FIX IT ONCE AND FOR ALL?
Thx,
--Alon
Solved!
Go to Solution.

Try this hotfix:
https://support.microsoft.com/kb/2752407
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Update to 10.6.8 - system hang (mouse issue) after resume from sleep

I am on older
MacBook Pro3.1
Intel Core 2 Duo
2.6GHz
Run on 10.6.8 almost flawelessly. Shortly after upgrade to 10.6.8 system started to hang periodically after resuming from sleep. Symptoms are that it stops responding to mouse (be it touch pad or USB mouse). Keyboard seems to be ok but system doesn't seem to be fully functional. I am able to ssh from the other computer and 'shutdown -r now' after reboot system seem to be ok until next resume from sleep. What interesting though is that this problem newer manifests then I am using external monitor.

Found problem. It was due to magic mouse that I left on. I carry this mouse in the laptop bag but rarely use it. Last time I used it (around the same time I install the update) I left it on in the bag. It was apparently disconnecting/connecting on its own and by some reason sometimes was breaking touch pad and other usb mouse connected to laptop, as soon as I switched magic mouse off broblem was fixed

My Mountain Lion mac crashes after resuming from sleep

Hello
My Mountain Lion mac crashes after resuming from sleep every time I use it
It happens every time the mac resumes from sleep and it started like a week ago
I remember installing the new updates for flash? and xquartz and nothing else.
I have also had microsoft word installed on my mac for about 1 weeks before this problem started so might be related to that
Please share with me any tips on how to fix this because I am really annoyed of losing stuff after each time my mac resumes from sleep

I have an iMac bought may -11, and it worked fine with Snow Leopard.
About a week ago I bought and installed Mountain Lion 10.8.2. Everything went fine, and all software worked ok. iPhoto had some problems, but after installing update the system prompted to do, it has worked ok.
The propblem occurs now and then, when computer is waked up from sleep. The Desktop occurs, but no software starts, not even System Tools untlil rebooting the computer. Of course, I can not reboot the computer from "Apple menu", but holding the power button down.
This is very embarassing! OsX Mountain Lion has turned out to be a very big disappointment. I installed id because of iCloud (i have a new iPad, too with iOs 6 installed).
Can anyone help me? Is there any other way to solve the problem than re-installing good old Snow Leopard?
I would not like to do that, I bought Mac because I was bored in re-installing and recovering!
Thank you

T61 - WWAN does not connect when resuming from sleep mode

Hi.
I have a T61 with integrated WWAN, which works perfectly - except I use sleep mode a lot, and when i resume from sleep mode, WWAN doesn't connect, I always get the same error - IP configuration failed. If I restart my OS, WWAN works normally again.
So far i have tried on Windows XP, Vista 32, Vista 64 and Windows 7 32 bit - always the same!
I connect via Access Connections, maybe there is a known issue?
Thank you, B

This bugs me as well. With the new Verizon software I just installed, it says "Adapter Disabled" when I resume from sleep.
I suspect a driver bug that needs to be adressed.
I use Vista Business 32bit, but had the same problem with XP.
Don Mannino

Sound not staying muted when resuming from Sleep mode

The subject says it all. When I resume from Sleep mode the sound is not staying muted. I have found a third party app to get around this but I would rather solve it without having to run something else in startup.
I have a HP Pavilion dv7-2206tx Entertainment Notebook running Windows 7 with all the latest updates installed.
Anyone know how to prevent this from happening?

youngunix wrote:
cfr wrote:
What does "every OS" include? Just thinking if it includes something like Windows, say, that would point to something rather different than if the problem only manifests in Linux.
Have you seen if the problem occurs if you use the nouveau drivers?
I'm sorry dude, but there is something wrong with you!! In every thread, you just ask or make lame @$$ statements.
cfr is a regular presence around here and helps quite a lot of people. He was trying to get clarification so that your problem could be further debugged. You may think that his statements are "lame ass" but you attitude is "asshole". Don't come here looking for help and then tell those trying to help you that their help sucks. If that is how you show your appreciation for support, you should go elsewhere.

Screen flickers when resuming from sleep mode

I have a newly brought T430 laptop with the Nvdia graphics card. Sometimes when I resume from sleep mode, the screen flickers before entering into the desktop view.
Is this a problem or normal? I hope nothing is wrong with my gpu. Is there a way to check?
Thanks!

etresoft wrote:
It is definitely not a Leopard bug because it has been happening on every portable Mac I've ever had.
I don't agree. I had no problems at all with my MacBook Pro running Tiger. I initially did an upgrade from Tiger to Leopard and when the problems started I assumed it was a problem with the upgrade. I then completely erased and did a clean install of Leopard. The problem has actually gotten worse since I did the clean re-install.
etresoft wrote:
Just close the screen, wait for it to go back to sleep, then open it again. It will probably be fine.
As I mentioned in my opening post, I've gone through that song and dance more times than I can count. I've closed it, waited for as much as an hour, opened it back up...same problem. I've hard powered it down, closed it, disconnected the AC adapter, removed the battery, opened it, held down the power button for 15 seconds, re-installed the battery, reconnected the AC adapter, pushed the power button, and the display will still be dark. It's sometimes taken as many as 5 or 6 iterations of that process before it will finally reset whatever problem it was having and boot normally with a functioning display.

Freeze after waking from sleep mode on MBP retina

After waking from sleep mode my MBP retina freezes for 3-5 seconds. Mouse and touchpad don't work. I wonder if it's mountain lion problem or hardware problem. Anyone faced this?

Just got a brand new model and OS X 10.8.2 (12C3012) and face the same issue, almost everytime it sleeps for too long. This is not a 3rd type SDD, this is a standard Apple SSD. I turned off the BT, I removed the almost every option from the battery saver mode. The current test is to disable the power nap - I will let you all know the result in a few hours.

Black screen after waking from sleep mode - Compaq Presario CQ5110F

My mother's computer has been having the problem listed in the subject -- after waking from sleep mode, the monitor just stays black, and won't come back. After trying everything I could find online, I eventually found the bios update which claims to fix the exact issue. The problem is that I guess my mother had opted to upgrade to Windows 7, while the bios update seems to only work for Windows Vista, as I get the following error message: "Your system does not meet the minimum requirements for this update. Update has been canceleld. (9998)." I've tried running the update in Vista compatibility mode, with no luck. I've tried using a different monitor, I've updated all the drivers, Windows Updates are all current, I've cleared CMOS. Any idea on how to fix this? It's very recent; only for about the past 2 weeks has this been happening, while we've had the computer for over 3 years. It's quite a waste of energy to keep it on all day.

Hello liltwix,
When taking your computer out of safe mode the screen just remains black, is that correct? I will try to help you with this issue.
I understand you upgraded from Vista to 7, was that when the issue started or has the computer had windows 7 installed for some time before this problem started?
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

My zero Key isn't working after waking from sleep mode. This is a real problem for me because my password contains a zero

My zero Key isn't working after waking from sleep mode. This is a real problem for me because my password contains a zero. I don't recall spilling anything or jamming it just that it worked before I closed the computer and wasn't after I woke it up.
I would like to fix the key but if that's not possible right away , Is there a way to reset my password without being able to type with a key thats in it?

Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
A. run Disk Warrior
B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks

My MacBook Pro won't reconnect to my Wi-FI automatically after waking from sleep mode

Hello, everyone. Since I updated to Yosemite, my MacBook Pro won't reconnect to my Wi-FI automatically after waking from sleep mode.
Does anyone know how to fix that?
Thanks in advance,
Arthur.

Hi, arthurpacifico.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting steps that I would recommend trying to see if it corrects this issue.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Reset your computer’s PRAM
http://support.apple.com/kb/HT1379
If the issue persists, try the troubleshooting steps I have attached below.
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
Solution
Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.Restart your computer.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/ht4628
Cheers,
Jason H.

High CPU load after resuming from sleep mode

Similar Messages

Maybe you are looking for