High CPU usage since last 48 hours

hi,
i'm experiencing a high cpu usage relating to "System" since last 48 hours. i'm also unable to open the Pictures or Music. It says "Scanning Device Storage" but seems never will end.
i've my phone restarted many times but changed nothing. i'm currently recharging my phone 2 times a day and i'm worried about the heat it's getting.
i'm also worried about the large size of data being out of my phone! is it a security issue?
(down bounds of the battery usage showing the phone on charge!)

Remove your media card and do a powered on, battery pull reboot. Reinsert your media card and see if the issue persists.
For the #Z30 model,
On your BlackBerry10 device with a non-removable battery:
Restart: With your BlackBerry powered ON, press and hold the upper edge power button a couple seconds and the tap the lower right RESTART.
or,
Reboot: With your BlackBerry powered ON, using the side edge volume keys, press and hold down both of the Up and Down volume keys for about 20 seconds, ignoring the initial screenshot message... the screen will go black and reboot.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Sppsvc.exe High cpu usage since 4/6/2015

sppsvc.exe using 60% to 80% of cpu since 4/6/2015 in Windows Server tech preview. Is this due to a update or the upcoming 4/15/2015 expiration date for build 9841? This has not been a problem up until now. Any ideas?

I've just tested it with the latest version of Firefox and the CPU usage is
rising in line with the number of IDX files.
Unfortunately I can't EASILY test the applet with IE6, I'm waiting for a
response from my partner to see if anyone uses IE6 with the applet.
Thanks
Arth

Dispatch Unit - High Cpu Usage

Hi,
ASA5510 8.2.5(50)
The Dispatch unit process is contantly having high cpu usage for last 10 hours.
Things checked:
1. show proc cpu-usage
2. show perf
It seems fine . Output attached
3. Show interfaces for error
No error, overruns, underrruns on interfaces
4. show traffic
Total cumulative through put on approx 4 Mbps.
drop rate max is 3 pkts /sec randomly and rare occurance on some interfaces
5. Connections and Xlate seem normal.
approx 1100.
Counters were reset 1 hour before the data was collected.
# sh cpu usage
CPU utilization for 5 seconds = 39%; 1 minute: 38%; 5 minutes: 44%
# sh processes cpu-usage sorted
PC Thread 5Sec 1Min 5Min Process
081aadc4 a79aff7c 35.7% 37.5% 42.5% Dispatch Unit
0853f89e a79a0b68 0.4% 0.2% 0.2% ARP Thread
# show perfmon
PERFMON STATS: Current Average
Xlates 0/s 0/s
Connections 21/s 32/s
TCP Conns 17/s 28/s
UDP Conns 1/s 1/s
URL Access 0/s 0/s
URL Server Req 0/s 0/s
TCP Fixup 0/s 0/s
TCP Intercept Established Conns 0/s 0/s
TCP Intercept Attempts 0/s 0/s
sh interface e0/0 | inc overrun
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
fw01/act# sh interface e0/1 | inc overrun
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
# sh conn all
1135 in use, 8777 most used
# sh xlate count
112 in use, 265 most used
# show asp drop frame
No route to host (no-route) 870
Flow is denied by configured rule (acl-drop) 103915
First TCP packet not SYN (tcp-not-syn) 1317
Bad TCP checksum (bad-tcp-cksum) 2
TCP failed 3 way handshake (tcp-3whs-failed) 6695
TCP RST/FIN out of order (tcp-rstfin-ooo) 4025
TCP packet SEQ past window (tcp-seq-past-win) 13
TCP Out-of-Order packet buffer full (tcp-buffer-full) 1949
TCP Out-of-Order packet buffer timeout (tcp-buffer-timeout) 600
TCP RST/SYN in window (tcp-rst-syn-in-win) 5
TCP dup of packet in Out-of-Order queue (tcp-dup-in-queue) 617
TCP packet failed PAWS test (tcp-paws-fail) 1248
IPSEC tunnel is down (ipsec-tun-down) 2
Slowpath security checks failed (sp-security-failed) 1699
DNS Inspect id not matched (inspect-dns-id-not-matched) 4
FP L2 rule drop (l2_acl) 15436
Dropped pending packets in a closed socket (np-socket-closed) 2
Please let us know what reason can be there for high cpu usage by Dispatch unit under current statistics?
What else should be checked to ensure cpu usage comes down?
Regards,
Gurjit Singh
Network Engineer
Spooster IT Services.

Hi Gurjar,
r u getting the below mentioned syslog messages?
Flow is denied by configured rule (acl-drop) 103915
106023, 106100, 106004
TCP Out-of-Order packet buffer full (tcp-buffer-full) 1949
TCP Out-of-Order packet buffer full:
This counter is incremented and the packet is dropped when appliance receives an
out-of-order TCP packet on a connection and there is no buffer space to store this packet.
Typically TCP packets are put into order on connections that are inspected by the
appliance or when packets are sent to SSM for inspection. There is a default queue size
and when packets in excess of this default queue size are received they will be dropped.
Recommendations:
On ASA platforms the queue size could be increased using queue-limit configuration
under tcp-map.
Similarly you need to check many reasons for the asp drop logs that you have captured and you need to monitor how much it is increasing and the difference.......
but 40 % CPU utilization is a okay kind of thing and you do not need to worry if that happens only during peak hours ans it is not increasing drastically more and more.
http://www.cisco.com/c/en/us/td/docs/security/asa/asa82/command/reference/cmd_ref/s2.html#wp1435096
Regards
Karthik

Skype on older PC, high cpu usage

Hi all!
Tried recently to use my old PC (Pentium4, 2.0GHz, 1G memory) as skype machine. All went well except when using video+audio, it wasn't enough cpu to handle that. Cpu usage was 100% and there was latency in video and audio. Tested that in local area network. Then what I found, much of the load went from pulseaudio (skype about 60%, pulseaudio about 40%). I installed the thing since GNOME without pulseaudio is somewhat broken. Then I googled and tried to tune pulseaudio:
From https://wiki.archlinux.org/index.php/PulseAudio, I implemented what said in "Glitches and high CPU usage since 0.9.14", it helped with sound quality.
From http://www.pulseaudio.org/wiki/PerfectSetup, in file /etc/pulse/daemon.conf
default-fragments = 8
default-fragment-size-msec = 5
And, finally, from http://linux.die.net/man/5/pulse-daemon.conf
resample-method=trivial
Something helped, after that PA cpu share dropped to about 15%, and I was able to skype with audio and video, even having couple % of cpu idle
Now comes interesting part: I went to gstreamer-properties and selected audio output to pulse. PA cpu load went back to 35%. Then a reverted it back to "auto detect", cpu load subsided to 15%. Then I remembered seeing somewhere that skype through PA emulation of ALSA takes less CPU than throug PA directly
Then I went to sleep
Any more ideas how to further optimize PA/skype to be able running skype on slow PC? I even consider removing PA altogether but I'm worried about setting sound in GNOME.
Anton

Did the sharing and unsharing of screen stabilise your CPU usage? I also tried deleting the Library/Caches/com.skype* directory and whilst it helped initially, in the long run it did not work. The only thing that worked for me was sreen share and unshare.
Personally I am just getting more and more disappointed with OS X. The way they have implemented HiDPI support with scaling (downscaling and then upscaling) is just insane and a lot of applications struggle. I am sure this is not the root cause of the high CPU usage issue for Skype. It's not long before I come off the Apple ecosystem altogether.

Since 10.4.6 Update: "ATSServer" with high CPU-usage when opening PDFs

Since I've updated to 10.4.6 my system is very slow when I open PDFs (in "Preview" or "Acrobat").
This is caused by the process "ATSServer" which goes through every file in "~/Library/Fonts" (I have over 4.800 files there - but just a view are activated by "FontBook") and so it takes very high CPU-usage.
I didn't have this problem bevore the update and I didn't make any changes on my font settings.
I've cleaned the font cache, but it doesn't help.
Any ideas?
Ciao
Mephizo
PS: Excuse my poor English.
PowerBook G4 17'' 1.67 GHz Mac OS X (10.4.6)
PowerBook G4 17'' 1.67 GHz Mac OS X (10.4.6)

I haven't noticed any change myself, Dan, but I have the 2 GHz model.
One thing I HAVE noticed though after OS updates is that they can often result in a fair amount of file and free space fragmentation immediately after installation. OSX's routines will deal with fragmentation of small files , but not of large ones (over 20 Meg), and it won't deal very effectively with free space fragmentation. If your HD is getting full this can cause significant slowdowns, especially where video is involved.
You should also run DiskUtility and check for any directory and permissions issues.
Cheers
Rod

High CPU Usage on C6509

Good day, can someone analyze this for me, in regards with high cpu usage.
2222222222222222222222222222222222333332222244444222222222
     8888555559999955555777773333344444000007777711111555559999
100
90
80
70
60
50
40                                              *****
30 ************************          ************************
20 **********************************************************
10 **********************************************************
    0....5....1....1....2....2....3....3....4....4....5....5....
              0    5    0    5    0    5    0    5    0    5
               CPU% per second (last 60 seconds)
     4443333334443433334333333333333333333333343333333333333333
     1006530591135079734601132535328062177773414263667168577916
100
90
80
70
60
50
40 ***** ********** **     * * * * **** * * *** ****** *
30 #############**##*####*#*##*###*#*#########*##*****###****
20 ##########################################################
10 ##########################################################
    0....5....1....1....2....2....3....3....4....4....5....5....
              0    5    0    5    0    5    0    5    0    5
               CPU% per minute (last 60 minutes)
              * = maximum CPU%   # = average CPU%
     4744444545444444444444444444333344444444444444444434444444433344344444
     4547425182436632379924402500899822115303104140406471591734499730802883
100
90
80   *
70   *
60   *
50   * * **** **   ***     *          *           *   ** *           **
40 **********************************************************************
30 #*******###**********##**********#********************************####
20 ######################################################################
10 ######################################################################
    0....5....1....1....2....2....3....3....4....4....5....5....6....6....7.
              0    5    0    5    0    5    0    5    0    5    0    5    0
                   CPU% per hour (last 72 hours)
                  * = maximum CPU%   # = average CPU%
Local_Backbone#sh proc cpu sorted 5sec
CPU utilization for five seconds: 24%/16%; one minute: 27%; five minutes: 27%
PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process
123 1380698152 938782622       1470 6.07% 6.66% 6.52%   0 IP Input
   9    71590456 190912340        374 0.39% 0.48% 0.47%   0 ARP Input
213    53552228 246488976        217 0.23% 0.42% 0.48%   0 SNMP ENGINE
176     2804332 35409778         79 0.15% 0.02% 0.00%   0 OSPF Hello
319      918144 11719407         78 0.15% 0.01% 0.00%   0 OSPF Router 100
   4         236       195       1210 0.07% 0.00% 0.00%   1 Virtual Exec
169     2374788   2035919       1166 0.07% 0.03% 0.00%   0 Adj Manager
118     5885520 15709517        374 0.07% 0.07% 0.07%   0 CDP Protocol
36       69788   9934569          7 0.07% 0.00% 0.00%   0 TTY Background
179    30669516 309965501         98 0.07% 0.23% 0.24%   0 IP SNMP
need a quick opinion as i have another backbone abroad that uses only 5-10% of cpu usage.
- same config
- same setup (2BB for Sec/firewall, 2BB for Integration, 6Distro SW)
- different number of users
thank you and god bless.

I also agree with Stephan that this is not a concern that the cpu you are seeing it sohuld reduce down.
If in case still want to do the troubleshooting here is the procedure:
Here are some of the commands you can refer while you see the high cpu:
•1- Show proc cpu sorted | ex 0.00% >> First check whether CPU is due to Interrupt or due to Process Switching.
Eg: CPU utilization for five seconds: 6%/2%; one minute: 2%; five minutes: 2%
6% is total CPU utilization and 2 % is due to Interrupt. You would see this on a higher bit when you have the high cpu. Total-interrupt will give you the value of Process.
More info: http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a00804916e0.shtml
b) Show proc cpu history :---Check since how long is the CPU been affected.
2- Check if there is any interface drops are been seen:
show interface | include line|drops   ( Check if any vlan/interface are having input drops)
3- check if there are any STP issue:
show spanning tree detail
show spann det | in ieee|from|occur|is exec
show spann det | in executing | changes
show interface | include line|drops
show cef drop
show ip traffic   >> Check the traffic utilization.
4- There are some internal debugging which would help to find out which packets ( from Src,dst) is hitting the CPU:
debug netdr capture rx <<<<( DEBUG OF NETDR IS VERY USEFULL TO CHECK WHAT PACKETSS ARE COMING TO CPU)
show netdr capture-packet >> This will give you the captured outputs were you can see the Src and dst . Then you can take the action with those src ip address guys to check why they are punting the traffic.
HTH
Regards
Inayath
***Plz rate if this info is helpfull.

DNS server process, high CPU usage

Hello,
I am having a problem with high CPU usage on DNS process. We have 1921 setup in network of about 100 workstations that use it as DNS server. It also performs split view functionality for couple of domains in order to avoid hairpin NAT. I know that a router is not fit for heavy server duty but such setup was unfortunately necessary.
In peak work hours we oftenly have CPU hitting 100% with DNS server process being the root cause,and on several occasions we had DNS process stuck in such state for prolonged periods of time during which other router functions were affected (t's a default gateway, IPsec concentrator etc.). Sometimes shutting the process and restarting it would solve the problem, but once it required a full reload in order to restore functionality (such was the description that engineer on duty reported to me).
Forwarder queue statistics:
Current size = 0
Maximum size = 86
Drops        = 0
IOS upgrade did not help, we are currently running 15.2(2)T.
The question is ... is such behaviour (CPU load) to be expected on LAN with 100 workstations due to slow CPU on router or we have bugged IOS DNS server (requiring a TAC case)?
The previous solution seem to do this functionality quite nicely (even though it was also a router), so I am not inclined to think that we are dealing with someone DoS-ing the DNS (WAN access to DNS is of course forbidden)
P.S.
Since we moved servers off the routers DNS, we do not receive complaints, but we had a couple of unresolved messages a day while mail server was using router for DNS. I am suspecting that an old bug where IOS DNS servers occasionaly sends clients back empty DNS replies (properly formatted message but without A record) could be still around?

hi,
i have the same problem on UC540 and 2911 on IOS 15.0.1. CPU high, router crashed. Reboot helps but until CPU usage spikes again. the only fix is to remove "ip dns server" from config and use a different DNS server
                    111                       1111    1111111111
          999999999900077777777799999777778888000099990000000000
    322222111119999900077776666622222111119999000088880000000000
100            ********                       ******************
90       *************         *****     **********************
80       ***************************     **********************
70       ******************************************************
60       ******************************************************
50       ******************************************************
40       ******************************************************
30       ******************************************************
20       ******************************************************
10       ******************************************************
   0....5....1....1....2....2....3....3....4....4....5....5....6
             0    5    0    5    0    5    0    5    0    5    0
               CPU% per second (last 60 seconds)
after removed IP dns server
                                       111
                             99999999990007777777779999977777888
              33333333332222211111999990007777666662222211111999
100                               ********
90                          *************         *****     ***
80                          ***************************     ***
70                          ***********************************
60                          ***********************************
50                          ***********************************
40                          ***********************************
30                          ***********************************
20                          ***********************************
10                          ***********************************
   0....5....1....1....2....2....3....3....4....4....5....5....6
             0    5    0    5    0    5    0    5    0    5    0
               CPU% per second (last 60 seconds)

Config Manager Agent - after Hardware Inventory High CPU Usage with WMIPRSVE and very fast empty Battery

Hi there,
since a few days there is on some machines (40-60) a high cpu usage on one core (quad core cpu machines) with the WMIPRSVE.EXE if the HARDWARE INVENTORY CYCLE started.
i try out some tests, read some forum articles and troubleshooting the WMI management but a real problem i doesn´t see.
in some articles i read that hardware inventory runs about minutes up to more hours but some machines runs longer, someone more as 1 day.
here an example of mine PC:
at 8:07 i started Hardware Inventory Cycle, in the InventoryAgent.log i can see that some Collection Namespace are captured.
after a few minutes there stopped and does nothing round about 5.9 hours or better, after 21436.097 Seconds.
For any hints i am grateful. :)
Inventory: *********************** Start of message processing. ***********************
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Message type is InventoryAction InventoryAgent
18.03.2015 08:09:56 11088 (0x2B50)
Inventory: Temp directory = C:\WINDOWS\CCM\Inventory\Temp\
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Clearing old collected files. InventoryAgent
18.03.2015 08:09:56 11088 (0x2B50)
Inventory: Opening store for action {00000000-0000-0000-0000-000000000001} ...
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
CInvState::VerifyInventoryVersionNumber: Mismatch found for '{00000000-0000-0000-0000-000000000001}': 4.2 vs. 0.0
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Version number mismatch; will do a Full report.
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Action=Hardware, ReportType=ReSync, MajorVersion=5, MinorVersion=0
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Inventory: Initialization completed in 0.141 seconds
InventoryAgent 18.03.2015 08:09:56
11088 (0x2B50)
Collection: Namespace = \\localhost\root\Microsoft\appvirt\client; Query = SELECT __CLASS, __PATH, __RELPATH, CachedLaunchSize, CachedPercentage, CachedSize, LaunchSize, Name, PackageGUID, TotalSize, Version, VersionGUID FROM Package; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:09:56
7836 (0x1E9C)
Failed to get IWbemService Ptr for \\localhost\root\vm\VirtualServer Namespace: 8004100E
InventoryAgent 18.03.2015 08:10:02
7836 (0x1E9C)
Failed to enumerate instances of VirtualMachine: 8004100E
InventoryAgent 18.03.2015 08:10:02
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, AddressWidth, BrandID, CPUHash, CPUKey, DataWidth, DeviceID, Family, Is64Bit, IsHyperthreadCapable, IsMobile, IsTrustedExecutionCapable, IsVitualizationCapable, Manufacturer,
MaxClockSpeed, Name, NormSpeed, NumberOfCores, NumberOfLogicalProcessors, PCache, ProcessorId, ProcessorType, Revision, SocketDesignation, Status, SystemName, Version FROM SMS_Processor; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:10:02
7836 (0x1E9C)
Collection: Namespace = \\.\root\CCM\powermanagementagent; Query = SELECT __CLASS, __PATH, __RELPATH, Requester, RequesterInfo, RequesterType, RequestType, Time, UnknownRequester FROM CCM_PwrMgmtLastSuspendError; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:10:03
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Availability, Description, DeviceID, Manufacturer, Name, Status FROM Win32_IDEController; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:10:03
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, BinFileVersion, BinProductVersion, Description, ExecutableName, FilePropertiesHash, FilePropertiesHashEx, FileSize, FileVersion, HasPatchAdded, InstalledFilePath, IsSystemFile,
IsVitalFile, Language, Product, ProductCode, ProductVersion, Publisher FROM SMS_InstalledExecutable; Timeout = 600 secs.
InventoryAgent 18.03.2015 08:10:03
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, DefaultIPGateway, DHCPEnabled, DHCPServer, DNSDomain, DNSHostName, Index, IPAddress, IPEnabled, IPSubnet, MACAddress, ServiceName FROM Win32_NetworkAdapterConfiguration; Timeout
= 600 secs. InventoryAgent
18.03.2015 14:06:43 7836 (0x1E9C)
Collection: Namespace = \\.\root\Nap; Query = SELECT __CLASS, __PATH, __RELPATH, description, fixupState, friendlyName, id, infoClsid, isBound, percentage, registrationDate, vendorName, version FROM NAP_SystemHealthAgent; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:06:43
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, AdditionalProductCodes, CompanyName, ExplorerFileName, FileDescription, FilePropertiesHash, FileSize, FileVersion, FolderPath, LastUsedTime, LastUserName, msiDisplayName,
msiPublisher, msiVersion, OriginalFileName, ProductCode, ProductLanguage, ProductName, ProductVersion, SoftwarePropertiesHash FROM CCM_RecentlyUsedApps; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:06:43
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, BankLabel, Capacity, Caption, CreationClassName, DataWidth, Description, DeviceLocator, FormFactor, HotSwappable, InstallDate, InterleaveDataDepth, InterleavePosition, Manufacturer,
MemoryType, Model, Name, OtherIdentifyingInfo, PartNumber, PositionInRow, PoweredOn, Removable, Replaceable, SerialNumber, SKU, Speed, Status, Tag, TotalWidth, TypeDetail, Version FROM Win32_PhysicalMemory; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:07:02
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Availability, Description, DeviceID, InstallDate, Manufacturer, Name, PNPDeviceID, ProductName, Status FROM Win32_SoundDevice; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:07:02
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Caption, ClassGuid, ConfigManagerErrorCode, ConfigManagerUserConfig, CreationClassName, Description, DeviceID, Manufacturer, Name, PNPDeviceID, Service, Status, SystemCreationClassName,
SystemName FROM Win32_USBDevice; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Collection: 62/74 inventory data items successfully inventoried.
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: Collection Task completed in 21436.097 seconds
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: 12 Collection Task(s) failed. InventoryAgent
18.03.2015 14:07:12 7836 (0x1E9C)
Inventory: Temp report = C:\WINDOWS\CCM\Inventory\Temp\25bf01b2-12fc-4eea-8e97-a51b3c75ba50.xml
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: Starting reporting task. InventoryAgent
18.03.2015 14:07:12 7552 (0x1D80)
Reporting: 4381 report entries created. InventoryAgent
18.03.2015 14:07:13 7552 (0x1D80)
Inventory: Reporting Task completed in 1.030 seconds
InventoryAgent 18.03.2015 14:07:13
7552 (0x1D80)
Inventory: Successfully sent report. Destination:mp:MP_HinvEndpoint, ID: {5541A94A-BED9-4132-AE54-110CB6896F02}, Timeout: 80640 minutes MsgMode: Signed, Not Encrypted
InventoryAgent 18.03.2015 14:07:13
7552 (0x1D80)
Inventory: Cycle completed in 21453.570 seconds
InventoryAgent 18.03.2015 14:07:30
7552 (0x1D80)
Inventory: Action completed. InventoryAgent
18.03.2015 14:07:30 7552 (0x1D80)
Inventory: ************************ End of message processing. ************************
InventoryAgent 18.03.2015 14:07:30
7552 (0x1D80)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Caption, ClassGuid, ConfigManagerErrorCode, ConfigManagerUserConfig, CreationClassName, Description, DeviceID, Manufacturer, Name, PNPDeviceID, Service, Status, SystemCreationClassName,
SystemName FROM Win32_USBDevice; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Collection: 62/74 inventory data items successfully inventoried.
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: Collection Task completed in 21436.097 seconds
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: 12 Collection Task(s) failed. InventoryAgent
18.03.2015 14:07:12 7836 (0x1E9C)
Inventory: Temp report = C:\WINDOWS\CCM\Inventory\Temp\25bf01b2-12fc-4eea-8e97-a51b3c75ba50.xml
InventoryAgent 18.03.2015 14:07:12
7836 (0x1E9C)
Inventory: Starting reporting task. InventoryAgent
18.03.2015 14:07:12 7552 (0x1D80)
Reporting: 4381 report entries created. InventoryAgent
18.03.2015 14:07:13 7552 (0x1D80)
Inventory: Reporting Task completed in 1.030 seconds
InventoryAgent 18.03.2015 14:07:13
7552 (0x1D80)
Inventory: Successfully sent report. Destination:mp:MP_HinvEndpoint, ID: {5541A94A-BED9-4132-AE54-110CB6896F02}, Timeout: 80640 minutes MsgMode: Signed, Not Encrypted
InventoryAgent 18.03.2015 14:07:13
7552 (0x1D80)
Inventory: Cycle completed in 21453.570 seconds
InventoryAgent 18.03.2015 14:07:30
7552 (0x1D80)
Inventory: Action completed. InventoryAgent
18.03.2015 14:07:30 7552 (0x1D80)
Inventory: ************************ End of message processing. ************************
InventoryAgent 18.03.2015 14:07:30
7552 (0x1D80)

InventoryAgent 18.03.2015 08:10:03
7836 (0x1E9C)
Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, DefaultIPGateway, DHCPEnabled, DHCPServer, DNSDomain, DNSHostName, Index, IPAddress, IPEnabled, IPSubnet, MACAddress, ServiceName FROM Win32_NetworkAdapterConfiguration; Timeout
= 600 secs. InventoryAgent
18.03.2015 14:06:43 7836 (0x1E9C)
Collection: Namespace = \\.\root\Nap; Query = SELECT __CLASS, __PATH, __RELPATH, description, fixupState, friendlyName, id, infoClsid, isBound, percentage, registrationDate, vendorName, version FROM NAP_SystemHealthAgent; Timeout = 600 secs.
InventoryAgent 18.03.2015 14:06:43
7836 (0x1E9C)
Looks like something in one or both of those wmi queries. it goes from 8:10:03 to 14:06:43 right around there. 6 hours to do that...
try running those queries from wbemtest manually; and see which one just never finishes.
Standardize. Simplify. Automate.

SBS 2011 - High CPU usage - Help me Microsoft forums! You're my only hope!

My company supports a client that has a SBS 2011 server. For about the past year, we've been fighting a recurring issue with performance on this server. There are about ten local users and four remote users. The server's CPU idles at
about 60%-80% but is usally running when under *any* load from 80%-100%. If you do anything on the console, it will stay pretty much at 100%. These are not power users by any means. The server is utilized for file/printer sharing, Exchange
2010, and one flat file database application (non-SQL). SharePoint is not utilized.
Needless to say, our client is frustrated. When opening files, using their database application, or doing anything Exchange-related, there is a large amount of lag on the client side. First, here are the server's specs:
Make:Dell PowerEdge T420
OS: SBS 2011 Standard SP1
CPU: 2 - Intel Xeon E5-2407
Memory: 32GB
RAID: RAID 1 - Operating System (C:)/Data Volume (E:) | RAID 5 - Data Volume (D:)
Here is what we have tried to resolve this to finality:
* Doubled resources - Initially the server had a single physical processor and 16GB of memory. While these specs alone should have been fine, and were fine when the server was installed, we had periods of time where the server would just sit all day at
100% usage. We doubled the resources and while this seemed like it would fix the issue, we are still seeing abnormally high processor usage.
* Removed all monitoring tools, antivirus, and backup software - As part of our testing, we removed our monitoring agent (LabTech) and antivirus (GFI Vipre). Mozy is utilized for an off-site backup so that was disabled. No dice.
* Verified updates - We made absolutely sure the server was 100% patched.
* Malware/Virus/Rootkit checks - We have ran scans checking for any potential issues with security.
* Ran MBSA and MBCA to fix any issues with the server's configuration.
There is no single process which is using all of the CPU, or we would simply be able to narrow it down. Our calls to Microsoft support have yielded no answers. The last call ended with Microsoft stating that a SBS server should always be running
at high CPU usage. Meanwhile, we have many other clients with less-beefy servers, with more users, who have no issues like these.
So, I'm turning to you all. I will gladly provide logs, configuration settings, even remote assistance sessions if you all can help shed some light on what might be causing my issues.
Thank you!

Some comments/ideas:
How long was the server running after this screenshot? I ask because store.exe is only got a 1GB of RAM which is really low - it should grab most of the RAM within a few hours.
The server was up for about 12 hours. I believe an adjustment was made before to limit the Exchange memory usage.
Strange that SearchIndexer (wsearch service) is so high although that may be a startup condition.
The LT* processes seem to be a 3rd party monitoring tool - no idea why it would ever need that much CPU though (I thought you disabled this?).
We had, but we cannot go forever without monitoring our client's server. It has been pulled off in the past and results on performance are pretty much the same.
The taskmgr process run by amnet_admin has used a lot of total CPU Time. What is it? (can't see the command line).
That's the user I was logged in as when I took the screenshot. Even the task manager seems to eat up the CPU.
The sqlserver process right above it is also busy - may want to look at the command line and figure out which SQL database that is (SBS has 3 - WSUS, Sharepoint, and SBS monitoring)
I believe that's the SharePoint database. They don't currently use their site. Would you recommend a removal and reinstallation? I would not completely remove as I know SBS doesn't like you removing parts of the complete package.
Strange that vds.exe is 10% - that is the interface to the disk management interface IIRC. Perhaps your monitoring service has gone awry here - definitely lose it.
I'll see about pulling it off and I'll see if there are any improvements.
-- Al

High CPU usage (more than 100%) while running video applications

Hello everyone,
I desperately need help with this.
I have a late 2007 White Macbook running Mac OS X 10.6.8 :
Model Name:          MacBook
Model Identifier:          MacBook2,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          3 GB
Bus Speed:          667 MHz
The issue that I am having is, whenever I play a video (Netflix/Silverlight player, YouTube, Skype, etc.) the CPU usage shoots up above 100% and the video or the video chat becomes VERY choppy. It becomes impossible to keep going once that starts. Originally I had 1Gb RAM (512 + 512) ... then I upgraded to (1GB + 512mb) ... it was fine for about a year and then started chocking on memory... so recently I made it (1GB +2GB) and that's when this high CPU usage thing started (according to my knowledge)
I have had this machine since last 4 years and its very dear to me. I dont wanna buy a new one. I will really appreciate if someone could help.

I am spending sleepless nights, researching for a fix. From what I found so far, a considerable amount of people were able to fix this issue by simple cleaning the insides of their machines using air dusters, especially the fans. I don't know how cleaning would help with CPU utilization, but by interpolation, I feel it's worth a try. At least it will be clean, if not perfectly functional. lol
Now the next big challenge ahead of me is getting the screws on my Macbook open. I was following the Fan Repair Guide on ifixit.com. I went and got the #00 Phillips screwdriver as suggested in the guide... came home and found out the screwdriver is too big.... went back got a #0000 Phillips (I also found out that screwdrivers with same number might be of different sizes in different stores)... got a couple of screws out and then--- another road-block!! there are a few extremely tiny Phillips screws on my macbook. Now I am hunting for the smallest Phillips screwdriver in the world. Hopefully, I will find it in some watch repair or eye-glasses repair kit in a store such as CVS or Walgreens... aaaah... this is sooo frustrating!!! I just want to get his done so that I can check it off the list of probable solutions that I want to try. Will update here if this works.
From what you say, I think that the Silverlight upgrade might be the culprit in my case too. But the effect is there also for Youtube, Skype , or any other Video/Graphics intensive application that I use. Although, Silverlight/Netflix performs the worst among all the apps.
I love my Macbook... don't want to part with it.

CF 10 sp 12 Enterprise high CPU usage hangs services, 2012 server on 2012 Hyper-V host

The last 2 days - my [removed link] CF site has suffered from high CPU usage (on and off) that stops functionality.
This will last several minutes then suddenly the high usage stops a few minute later the high cpu usage starts again.
I don't have any scheduled processes allowed to run.
Restarting the coldfusion service during a high CPS incident - the cpu usage just picks up where it left off when restarted.
I have assigned 4 CPUs (normal) or 8CPUs (as a test) to the VM and I get the same high CPU then low usage. This is a fresh install several months ago on a new VM.
I'd like some Adobe support on this issue but can't seem to find the contact phone number.
This series of high and low cpu usage first started Monday AM about midnight until 7:00 AM Tuesday was quiet and Wednesday this AM I'm having the same issues.
Ideas?
Update: While waiting for this to post - the high CPU usage started again and this time I stopped and restarted the Jetty service ... and the CPU usage went away...
Update: the high cpu started again and a restart of the jetty service didn't help --- neither did the .net service restart... the cf10 application service did stop the high usage...
Jay Bietz
Message was edited by: Jay Bietz after post accepted.

After 2 hang free days -- Friday midnight (above is the gcviewer ) and ~2 hours later had the hang condition again. Current java.config includes
java.args=-server -Xms4096m -Xmx4096m -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005 -XX:PermSize=512m -XX:MaxPermSize=512m -XX:+UseParallelGC -Xbatch -Dcoldfusion.home={application.home} -Dcoldfusion.rootDir={application.home} -Dcoldfusion.libPath={application.home}/lib -Dorg.apache.coyote.USE_CUSTOM_STATUS_MSG_IN_HEADER=true -Dcoldfusion.jsafe.defaultalgo=FIPS186Random -Dcom.sun.management.jmxremote.port=8701 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false -Xmn1024m -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGC -verbose:gc -Xloggc:cfwhispererGClive4.log -Dcoldfusion.classPath={application.home}/lib/updates,{application.home}/lib,{application .home}/lib/axis2,{application.home}/gateway/lib/,{application.home}/wwwroot/WEB-INF/flex/j ars,{application.home}/wwwroot/WEB-INF/cfform/jars,C:\\CFusion10\\cfusion\\verisign\\payfl owpro\\Java\\PFProColdFusion,C:\\CFusion10\\cfusion\\verisign\\payflowpro\\Java\\PFProCold Fusion\\Verisign.jar
GCviewer shows that the full GCcollections suddenly start firing off many times in a short period of time.
Jay
will work on the tomcatlog issues next.

Unusually high cpu usage with iMovie 6.0.3

I'm having trouble with very high cpu-usage. Just the open imovie app is taking up about 50%, during playback it sometimes peaks over 100%! The project file is pretty big (about 30 gig), but that is mainly because of the amount of footage imported into it. The movie itself is about 25 minutes in length. There is some audio editing going on: some soundeffects, musicfiles (no drm-protection), audio commentary that i recorded within imovie. I know that imovie has trouble when there is a lot of audio/audio editing involved and this project is probably a little more complex than other stuff i did in imovie, but i never had such problems. i can hardly use playback anymore. I recently updated Quicktime to 7.6.4 and Perian to version 1.2.1. Any ideas what's going on or how to work around the problems? Since the movie is about 80% finished i don't really want to start all over again. Thanks in advance for your input!

Hi Klaus1
I have several plug-ins by cfx and the slick volumes 4, 6 8 and 10. I can post a list of all of them if you like. Up to now they never made any trouble, but you'll never know...
The edit in the timeline is about 25 minutes long. But the project file contains captured dv-footage of about 2 hours, so that alone adds up to something like 26 GB. Then there are a few rendered effect-clips done with some of the plug-ins like stabilizing or color correction which also add to the 30 GB, as well as some audio-files (some music, my voice-over commentary). I emptied the trash several times while working on the movie. At this moment there are only a few MB of erased audio in it.
It all sounds a bit like this is an insanely huge and complex project, but as i said, i have done projects like this in imovie without the massive cpu-usage. I'd like to continue to use imovie, but if this problem keeps coming up with future projects, i might as well take the step and switch to Final Cut Express.
For now I will try your idea of exporting the movie as it is now and open it in a new project file.
Thanks for your help and input so far!

High CPU Usage / Dropped Packets - Switch Blade WS-CBS3120X-S

Hi all,
I have a couple of Switches Blade 3120, working as active-standby model (HSRP) on a new site deployment. There are other 20 sites more or less, working on the same model, without issues. But in this one, we are seeing a high cpu usage. The traffic going through the platform is 600Mbps (on peaks), and in this case we have 40% of CPU usage. Traffic should be close to 3 Gbps. When we tried to send the whole traffic through the platform, active switch began to drop packets on the majority of interfaces.
When we analyze the CPU usage, there is a special process called "HL3U bkgrd proce" always have the most CPU use, but we do not know what concerns. We do not know if it is caused because there are PBRs configured. It should not matter. How I mentioned, there are other sites working fine and have had always the same PBR number.
Could you guys help us?. Any idea what is causing the high usage?. Is there a special debug we could to perform to diagnose the issue?. Also, we have seen a high interrupt CPU usage (9% in this case).
Find attached the whole diagnosis outputs.
Thanks for your assistance guys.
Cheers,
Juan Pablo
bog-sib-INT-rtr-1#show processes cpu sorted 5sec
CPU utilization for five seconds: 30%/9%; one minute: 25%; five minutes: 23%
PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
157   140004809   107071220       1307 14.24% 10.19% 9.01%   0 HL3U bkgrd proce
119     6860957     1519183       4516 0.79% 0.59% 0.53%   0 hpm counter proc
166     2511492      302802       8294 0.15% 0.15% 0.15%   0 HQM Stack Proces
199     4182906    15255882        274 0.15% 0.21% 0.20%   0 IP Input
357      237531      782101        303 0.15% 0.03% 0.00%   0 IP SNMP
186         101         148        682 0.15% 0.09% 0.02%   1 Virtual Exec
242       63071     2330717         27 0.15% 0.02% 0.00%   0 CEF: IPv4 proces
12      163754      620353        263 0.15% 0.01% 0.00%   0 ARP Input
   9           0           2          0 0.00% 0.00% 0.00%   0 License Client N
   8          41        1827         22 0.00% 0.00% 0.00%   0 WATCH_AFS
11          50           4      12500 0.00% 0.00% 0.00%   0 Image License br
   7           0           2          0 0.00% 0.00% 0.00%   0 Timers
bog-sib-INT-rtr-1#sh ip cef summary
IPv4 CEF is enabled for distributed and running
VRF Default
119 prefixes (119/0 fwd/non-fwd)
Table id 0x0
Database epoch:        2 (119 entries at this epoch)

Hi Leolaohoo,
I had not played with this one too !!!!...
1). IOS version (It was recently updated)
bog-sib-INT-rtr-1#sh ver
Cisco IOS Software, CBS31X0 Software (CBS31X0-UNIVERSALK9-M), Version 12.2(58)SE1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 05-May-11 04:08 by prod_rel_team
ROM: Bootstrap program is CBS31X0 boot loader
BOOTLDR: CBS31X0 Boot Loader (CBS31X0-HBOOT-M) Version 12.2(0.0.951)SE3, CISCO DEVELOPMENT TEST VERSION
bog-sib-INT-rtr-1 uptime is 2 weeks, 3 days, 17 hours, 14 minutes
System returned to ROM by power-on
System restarted at 00:59:27 UTC Sat Jun 9 2012
System image file is "flash:cbs31x0-universalk9-mz.122-58.SE1.bin"
2). What interface do you want to see?, do you want to see all interfaces? . This switch has 16 interfaces that connect servers, and other going to our client. Below, the state of the two kind of interfaces:
Interface to Client (Bearer)
TenGigabitEthernet1/0/1 is up, line protocol is up (connected)
Hardware is Ten Gigabit Ethernet, address is 001f.275d.d81b (bia 001f.275d.d81b)
Description: BearerNContent_Aggregrate
MTU 1500 bytes, BW 10000000 Kbit/sec, DLY 10 usec,
     reliability 255/255, txload 10/255, rxload 14/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 10Gb/s, link type is auto, media type is 10GBase-LR
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 2w3d, output hang never
Last clearing of "show interface" counters 07:07:56
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 562469000 bits/sec, 83641 packets/sec
5 minute output rate 430500000 bits/sec, 73141 packets/sec
     2020563158 packets input, 1739897855828 bytes, 0 no buffer
     Received 13257 broadcasts (13257 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 13257 multicast, 0 pause input
     0 input packets with dribble condition detected
     1745065310 packets output, 1347244137726 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 unknown protocol drops
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 pause output
     0 output buffer failures, 0 output buffers swapped out
Interface to Server
GigabitEthernet1/0/8 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 001f.275d.d808 (bia 001f.275d.d808)
Description: bog-15
MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
     reliability 255/255, txload 15/255, rxload 12/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, link type is auto, media type is 1000BaseX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:17, output hang never
Last clearing of "show interface" counters 07:09:12
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 19418
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 47705000 bits/sec, 7155 packets/sec
5 minute output rate 58897000 bits/sec, 8011 packets/sec
     178178750 packets input, 153802177226 bytes, 0 no buffer
     Received 4091 broadcasts (0 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 0 multicast, 0 pause input
     0 input packets with dribble condition detected
     212233312 packets output, 206621942776 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 unknown protocol drops
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 pause output
     0 output buffer failures, 0 output buffers swapped out
Thanks for your help. I am losing my hair with this issue.
Cheers,
Juan P.

High CPU usage - 3750 X stack

Support Community
We recently configured a stack of four 48 port 3750-x switches . We are noticing high CPU usage. "Hulc LED process" seems pretty high.
This has coincided with VMware servers getting slow and non-responsive at times, perhaps a coincidence, not sure.
Below I provided some outputs that might help to diagnose it
Thanks
John
System image file is "flash:/c3750e-ipbasek9-mz.122-58.SE2/c3750e-ipbasek9-mz.122-58.SE2.bin"
Show inventory output
NAME: "1", DESCR: "WS-C3750X-48"
PID: WS-C3750X-48T-S   , VID: V02 ,
NAME: "Switch 1 - Power Supply 0", DESCR: "FRU Power Supply"
PID: C3KX-PWR-350WAC   , VID: V02L ,
NAME: "2", DESCR: "WS-C3750X-48"
PID: WS-C3750X-48T-S   , VID: V02
NAME: "Switch 2 - Power Supply 0", DESCR: "FRU Power Supply"
PID: C3KX-PWR-350WAC   , VID: V02D ,
NAME: "3", DESCR: "WS-C3750X-48"
PID: WS-C3750X-48T-S   , VID: V02
NAME: "Switch 3 - Power Supply 0", DESCR: "FRU Power Supply"
PID: C3KX-PWR-350WAC   , VID: V02L ,
NAME: "4", DESCR: "WS-C3750X-48"
PID: WS-C3750X-48T-S   , VID: V02
NAME: "Switch 4 - Power Supply 0", DESCR: "FRU Power Supply"
PID: C3KX-PWR-350WAC   , VID: V02L ,
SWITCH#sh processes cpu sorted
CPU utilization for five seconds: 61%/5%; one minute: 50%; five minutes: 49%
PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
168   260466386    44948517       5794 14.53% 13.98% 13.70%   0 Hulc LED Process
231    97586088    27253906       3580 4.95% 4.73% 4.64%   0 Spanning Tree
213    63106121   154928892        407 4.15% 3.89% 3.91%   0 IP Input
284    70113217    34537588       2030 3.51% 3.98% 4.17%   0 RARP Input
   4     6663412      421278      15817 3.03% 0.43% 0.32%   0 Check heaps
374     9872291    10805181        913 3.03% 0.77% 0.62%   0 IP SNMP
376    11142951     5370604       2074 3.03% 0.73% 0.66%   0 SNMP ENGINE
12    35389011    32152175       1100 2.87% 2.08% 2.20%   0 ARP Input
128    34962407     3622140       9652 2.07% 1.69% 1.63%   0 hpm counter proc
85    49034286     8536062       5744 1.91% 2.44% 2.44%   0 RedEarth Tx Mana
107    25127806    46459053        540 1.27% 1.10% 0.93%   0 HLFM address lea
174        2412        1714       1407 0.95% 0.39% 0.25%   1 SSH Process
220     6423643    12634764        508 0.79% 0.70% 0.56%   0 ADJ resolve proc
181     6913179     2890070       2392 0.63% 0.31% 0.36%   0 HRPC qos request
375     1681949     5000777        336 0.47% 0.08% 0.07%   0 PDU DISPATCHER
84    10180707    12623537        806 0.47% 0.30% 0.37%   0 RedEarth I2C dri
        1
      666666096996666666666666659666667666666666666666666766676666666656666666
      249363098992351145264823289455360612252332233522344115537230141392553343
100       ** **               *
   90       ** **               *
   80       ** **               *
   70   * * ***** *   * * *    * ** ***   *       *     * ****         **
   60 **********************************************************************
   50 ######################################################################
   40 ######################################################################
   30 ######################################################################
   20 ######################################################################
   10 ######################################################################
     0....5....1....1....2....2....3....3....4....4....5....5....6....6....7..
               0    5    0    5    0    5    0    5    0    5    0    5    0
                   CPU% per hour (last 72 hours)
                  * = maximum CPU%   # = average CPU%
      455555555554444444444555554444455555555555555555555444444444
      922222111118888866666000009999911111555554444422222444448888
100
   90
   80
   70
   60                                     *****
   50 ***************************************************     **
   40 **********************************************************
   30 **********************************************************
   20 **********************************************************
   10 **********************************************************
     0....5....1....1....2....2....3....3....4....4....5....5....6
               0    5    0    5    0    5    0    5    0    5    0
               CPU% per second (last 60 seconds)
      565756555555555555555555555555555556555555555555565555565556
      518841757869248569271526666733778330496833777819929379701861
100
   90
   80    *
   70    *
   60 **** ******* **** * * ***** *** * *** **** **** **** *
   50 ##########################################################
   40 ##########################################################
   30 ##########################################################
   20 ##########################################################
   10 ##########################################################
     0....5....1....1....2....2....3....3....4....4....5....5....6
               0    5    0    5    0    5    0    5    0    5    0
               CPU% per minute (last 60 minutes)
              * = maximum CPU%   # = average CPU%

Thanks to all for your replies.
Jeff
I was aware of the many ACLs however we used to have the same ACLs in a previous 3750G stack about 2 weeks ago and we never had this issue. I agree I need to optimize them and do somehing because it is reaching its max before the CPU starts processing them but I am not certain this is what is causing the issue.
Nikolay,
I am trying to understand "interrupts" with the analysis of the outputs I posted. Here is another output deom the link you provided. Please post your thoughts if you can.
This switch also serves as a gateway(L3 role) for many systems. Would it make sense to offload that responsability from this switch and let an actual router do it?
Thanks
Johnny
show controllers cpu-interface
ASIC    Rxbiterr   Rxunder    Fwdctfix   Txbuflos   Rxbufloc   Rxbufdrain
ASIC0     0          0          0          0          0          0
ASIC1     0          0          0          0          0          0
ASIC2     0          0          0          0          0          0
HOL Fix Counts
No Fixes:          0 Added:          0 In Use:          0 Both:          0
CPU Heartbeat Statistics
Tx Success Tx Fail    1st Thr    2nd Thr    Unthr      RetryCtMax
37139562          0          0          0          0          1
Rx Delay
         0          1          2          3          4
37139562          0          0          0          0
AddlDelay AdvanceCnt
         0          0
Rx Retries by RetryCount
         0          1          2          3          4          5          6
37139562          0          0          0          0          0          0
         7          8          9
         0          0          0
AddlRetry
         0
cpu-queue-frames retrieved dropped    invalid    hol-block stray
rpc               104077409 0          0          0          0
stp               19189469   0          0          0          0
ipc               11093838   0          0          0          0
routing protocol 141021559 0          0          0          0
L2 protocol       230347     0          0          0          0
remote console    17         0          0          0          0
sw forwarding     257436702 0          0          0          0
host              21146276   0          0          0          0
broadcast         332154608 0          0          0          0
cbt-to-spt        0          0          0          0          0
igmp snooping     2796987    0          0          0          0
icmp              90752156   0          0          0          0
logging           0          0          0          0          0
rpf-fail          0          0          0          0          0
dstats            0          0          0          0          0
cpu heartbeat     37139562   0          0          0          0
cpu-queue         static inuse static added
rpc               0            0
stp               0            0
ipc               0            0
routing protocol 0            0
L2 protocol       0            0
remote console    0            0
sw forwarding     0            0
host              0            0
broadcast         0            0
cbt-to-spt        0            0
igmp snooping     0            0
icmp              0            0
logging           0            0
rpf-fail          0            0
dstats            0            0
cpu heartbeat     0            0
Supervisor ASIC receive-queue parameters
queue 0 maxrecevsize 7E0 pakhead 5505A88 paktail 54655A8
queue 1 maxrecevsize 7E0 pakhead 5689164 paktail 5687F54
queue 2 maxrecevsize 7E0 pakhead 5547AA4 paktail 554719C
queue 3 maxrecevsize 7E0 pakhead 5DC233C paktail 5DBA4CC
queue 4 maxrecevsize 7E0 pakhead 56A7198 paktail 56A7AA0
queue 5 maxrecevsize 7E0 pakhead 5D61304 paktail 5D72F80
queue 6 maxrecevsize 7E0 pakhead 5D856D4 paktail 5D989E4
queue 7 maxrecevsize 7E0 pakhead 5BDE29C paktail 5BDC784
queue 8 maxrecevsize 7E0 pakhead 5CC00A8 paktail 5CB3574
queue 9 maxrecevsize 7E0 pakhead 59DD86C paktail 59DD86C
queue A maxrecevsize 7E0 pakhead 59BF43C paktail 59C13D8
queue B maxrecevsize 7E0 pakhead 5DD18A0 paktail 5DCE6F4
queue C maxrecevsize 7E0 pakhead 59E9CBC paktail 5A049B8
queue D maxrecevsize 7E0 pakhead 59D8EA0 paktail 59DD25C
queue E maxrecevsize 0 pakhead 0 paktail 0
queue F maxrecevsize 7E0 pakhead 59A7080 paktail 59A6BFC
Supervisor ASIC exception status
Receive overrun    00000000   Transmit overrun 00000000
FrameSignatureErr 00000000   MicInitialize    00000002
BadFrameErr        00000000   LenExceededErr   00000000
BadJumboSegments   00000000
Supervisor ASIC Mic Registers
MicDirectPollInfo               80000200
MicIndicationsReceived          00000000
MicInterruptsReceived           00000009
MicPcsInfo                      0000001F
MicPlbMasterConfiguration       00000000
MicRxFifosAvailable             00000000
MicRxFifosReady                 0000BFFF
MicTimeOutPeriod:       FrameTOPeriod: 00000EA6 DirectTOPeriod: 00004000
MicTransmFramesCopied           00000003
MicTxFifosAvailable             0000000E
MicConfiguration:       Conf flag: 00000110     Interrupt Flag: 00000008
MicReceiveFifoAssignmen Queue 0 - 7: 33333333   Queue 8 - 15:33333333
MicReceiveFramesReady: FrameAvailable: 00000181        frameAvaiMask: 00000000
MicException:
        Exception_flag 00000000
        Message-1       00000000
        Message-2       00000000
        Message-3       00000000
MicIntRxFifo:
        ReadPtr         000005C0        WritePtr        000005C0
        WHeadPtr        000005C0        TxFifoDepth     C0000800
MicIntTxFifo:
        ReadPtr         00000728        WritePtr        00000728
        WHeadPtr        00000728        TxFifoDepth     C0000800
MicDecodeInfo:
Fifo0: address:        03FF4000 asic_num:      00000100
Fifo1: address:        03FF4400 asic_num:      00000101
MicTransmitFifoInfo:
Fifo0:   StartPtrs:     0E2CE800        ReadPtr:        0E2CEBE8
        WritePtrs:      0E2CEBE8        Fifo_Flag:      8A800800
        Weights:        001E001E
Fifo1:   StartPtrs:     0E02D000        ReadPtr:        0E02D138
        WritePtrs:      0E02D138        Fifo_Flag:      89800400
        Weights:        000A000A
MicReceiveFifoInfo:
Fifo0: StartPtr:       0E4AF000        ReadPtr:        0E4AF2A8
        WritePtrs:      0E4AF308        Fifo_Flag:      8B000FA0
        writeHeaderPtr: 0E4AF308
Fifo1: StartPtr:       0E78C000        ReadPtr:        0E78C2E8
        WritePtrs:      0E78C2E8        Fifo_Flag:      89800400
        writeHeaderPtr: 0E78C2E8
Fifo2: StartPtr:       0E744800        ReadPtr:        0E744A70
        WritePtrs:      0E744A70        Fifo_Flag:      89800400
        writeHeaderPtr: 0E744A70
Fifo3: StartPtr:       0EBD1000        ReadPtr:        0EBD13B8
        WritePtrs:      0EBD13B8        Fifo_Flag:      89800400
        writeHeaderPtr: 0EBD13B8
Fifo4: StartPtr:       0E7D3800        ReadPtr:        0E7D3A58
        WritePtrs:      0E7D3A58        Fifo_Flag:      89800400
        writeHeaderPtr: 0E7D3A58
Fifo5: StartPtr:       0EB40600        ReadPtr:        0EB40688
        WritePtrs:      0EB40688        Fifo_Flag:      88800200
        writeHeaderPtr: 0EB40688
Fifo6: StartPtr:       0EB87400        ReadPtr:        0EB874F0
        WritePtrs:      0EB874F0        Fifo_Flag:      89800400
        writeHeaderPtr: 0EB874F0
Fifo7: StartPtr:       0E880000        ReadPtr:        0E880E20
        WritePtrs:      0E881520        Fifo_Flag:      8C001900
        writeHeaderPtr: 0E881520
Fifo8: StartPtr:       0EB1A600        ReadPtr:        0EB1A770
        WritePtrs:      0EB1A780        Fifo_Flag:      880001F0
        writeHeaderPtr: 0EB1A780
Fifo9: StartPtr:       0E2E0CD8        ReadPtr:        0E2E0CD8
        WritePtrs:      0E2E0CD8        Fifo_Flag:      82800008
        writeHeaderPtr: 0E2E0CD8
Fifo10: StartPtr:       0E81D000        ReadPtr:        0E81D1D8
        WritePtrs:      0E81D1D8        Fifo_Flag:      88800200
        writeHeaderPtr: 0E81D1D8
Fifo11: StartPtr:       0E4AEF00        ReadPtr:        0E4AEF60
        WritePtrs:      0E4AEF60        Fifo_Flag:      86800080
        writeHeaderPtr: 0E4AEF60
Fifo12: StartPtr:       0E84A000        ReadPtr:        0E84A300
        WritePtrs:      0E84A000        Fifo_Flag:      89000100
        writeHeaderPtr: 0E84A000
Fifo13: StartPtr:       0E4AEE00        ReadPtr:        0E4AEE00
        WritePtrs:      0E4AEE00        Fifo_Flag:      86800080
        writeHeaderPtr: 0E4AEE00
Fifo14: StartPtr:       00000000        ReadPtr:        00000000
        WritePtrs:      00000000        Fifo_Flag:      00800000
        writeHeaderPtr: 00000000
Fifo15: StartPtr:       0E02CEC0        ReadPtr:        0E02CED0
        WritePtrs:      0E02CED0        Fifo_Flag:      84800020
        writeHeaderPtr: 0E02CED0
===========================================================
Complete Board Id:0x00B2
===========================================================

Opera and high cpu usage

Hello all!
I have this annoying problem with opera.
After 1-2 hours of running opera cpu usage jumps to about 60-80%. To stop this I have to close opera and restart it.
I mostly have about 30+ tabs opened, but this shouldn't affect the cpu usage. It didn't in the past. I used the opera-devel-qt4 (10.20_4744-1) package from AUR and now I switched back to the "default" opera (10.10-2) package.
This started some days ago, and i cannot find out what causes this.
Any suggestions?
Vlad
Last edited by DonVla (2010-01-07 22:37:58)

I have no plugins running and killed the wrapper.
However it worked fine for the most time. I noticed opera has a higher usage than firefox. But now it's barely usable. Every 3-5 hours I have to stop and then restart opera. With the bundled version it's a little better. But it still freezes for some seconds with high cpu usage.

High CPU usage since last 48 hours

Similar Messages

Maybe you are looking for