High Def Podcasts and the Classic

I recently downloaded 2 High Def Podcasts and then converted them to "iPod viewing". The last message I recieve when syncing my Classic is that it cannot moved these HD Podcasts over.
Anyone else have a similar issue or know how to tell if the podcasts have actually been converted?

Welcome to the forums.
FCP doesn't support the format now, and there is no word when support will occur.
If the camera has an HDMI interface, then the Black-Magic Intensity card is the one for you. And $300 is as cheap as it gets. Unfortunately I think it only works with FCP, and not iMovie. iMovie HD can only capture via firewire, and it doesn't support that format. FCP and that card (need a MacPro or Quad to use that card) are the only options at this time, and it captures footage as a workable format.
Shane

Similar Messages

I have a new 160GB iPod Classic. I often listen to it for many hours at a time. Even with Itunes and the Classic set on shuffle it repeats songs often and only plays a small fraction of my songs. Help! of my

When listening for hours to my new Clasic 160 with several thousand songs and both itunes and the Classic set to shuffle all songs it only plays a small fraction of my library and plays many songs several times over that period. It also seems to pick a small different group of songs to repeat without touching many of most of my songs each time I start listening. Over 98% of the music is legally owned in my CD collection. A few are down loads which play! There should be no issues with ownership. Please help. As much as I like all my tunes I want to actually hear them all. There are many many albums that have never been played.

Okay, well we've eliminated a couple of things.
One thing I have noticed about the iPod Classic: I suspect that "shuffle" is actually a Playlist, not a real shuffle. The Classic is not as powerful as iTunes or a desktop/computer, so it cannot truely "shuffle songs". I suspect what happens is that every Sync of the Classic with its iTunes Library causes a revised "shuffle playlist" to be put on the iPod and then, when you choose Shuffle play, it actually uses that special hidden "shuffle playlist".
So one trick is to Sync your iPod with iTunes frequently. This would change the "shuffle playlist". Another trick would be to create your own Playlists, either by adding what you want to a Regular Playlist or by creating a Smart Playlist which adds and removes songs by itself.
Smart Playlists: for example, you can create a Smart Playlist (in iTunes) which contains a random selection of all songs, or a random selection of a particular group of songs, provided the song has not been played for a period of time, say six months, or 300 days. Every Sync of the iPod with iTunes would remove any song from that Smart Playlist if it has been played. That same song cannot go back into the Playlist for a period of six months, or whatever you choose.
This way, you can reduce the likelyhood of hearing the same songs too often. This brings me to another point. If you have the same song, on different albums, then it's possible that you are hearing that same song but from both albums.
Try this: in your iTunes Library,
look for and click on the big + button and choose New Smart Playlist..., if you do not have the Sidebar displayed, switch to the Playlists view where you will find it in the bottom left corner,
Set it up to look like this:
It creates a list of songs that have not been played for fifteen weeks. It excludes videos and in my iTunes Library, it has 527 songs in it. If you would like a smaller list than that, click on the Limit to and fill in the number of songs you want.
Having set it up, play some songs from it (in shuffle mode if you wish) and watch how it changes . The song must play through to the end of the track before it is classed as "played". If you like it, let it go onto your iPod. You could set up a few Playlists, each with their own rules. Even if a song appears in two different Smart Playlists, if you have the "last played is not in the last" rule in both lists, then playing the song will eliminate it from both lists. None of this removes songs from the iPod (unless you use Sync selected Playlists...).

My iPhone has a black background and the classic rotating wheel. I try it to put it in DFU but when I turn it on it goes back in this modality and my mac doesn't recognize the phone. HELP ME

my iPhone has a black background and the classic rotating wheel. I try it to put it in DFU but when I turn it on it goes back in this modality and my mac doesn't recognize the phone. HELP ME!

That is correct.
That is the price of a replacement iphone once your iphone is outside of the warranty period

I have a sequence on tcp that is Standard Def. I have a new set of files in High Def that match the old files. I would like to replace all the SD footage with the HD footage. Anyone know of a workflow to do this task?

I have a sequence on tcp that is Standard Def. I have a new set of files in High Def that match the old SD files. I would like to replace all the SD footage with the HD footage. Anyone know of a workflow to do this task?

Do a media manage of the sequence converting the files to the appropriate HD format making the clips offline. Then simply reconnect the offline clips to the HD clips. There may be issues in the file names, but they can usually be worked out either with the naming options in media manager or renaming your hd files. There are many utilities that allow you to batch rename files.

Re: high def video and software

I purchased a Sony High Def Video Camcorder.
It is the SR1.
How soon will MAC offer software (e.g. final cut or imovie)
that will allow me to edit the high definition video?
I have heard that Blackmagic offers a card that allows you to run the video into the computer - will I need this card to run the video into imovie or final cut express?
Thanks,
Martin
PS Are there other HDMI cards for mac that are cheaper than $300 and is there any MAC editing software for HIGH DEF already out there?

Welcome to the forums.
FCP doesn't support the format now, and there is no word when support will occur.
If the camera has an HDMI interface, then the Black-Magic Intensity card is the one for you. And $300 is as cheap as it gets. Unfortunately I think it only works with FCP, and not iMovie. iMovie HD can only capture via firewire, and it doesn't support that format. FCP and that card (need a MacPro or Quad to use that card) are the only options at this time, and it captures footage as a workable format.
Shane

Podcasts and the dreaded exclamation point

Most of my podcasts will no longer update. This actually started BEFORE iTunes 7. I can see new episodes are available but when I try to download I get messages like "this URL was not found on the server". Per another poster, I tried deleting and reloading one of the podcast subscriptions. Not only did I lose everything, I cannot resubscribe. I get the URL message. I can, however manually download individual episodes (pain in the...)
How can I escape the ! ?

I'm having similar problems with the dreaded exclamation point. Even after reading several threads, my problem still isn't solved. Here's the lowdown:
I've tested this feed on 7 different computers (5 PCs, 2 Macs).
All but 2 of the computers can subscribe and download the episodes with no problems. The troublesome computers? One PC. And one Mac.
The feed has been redirected through FeedBurner. I'm subscribing manually (and yes, I typed the feed correctly).
On the problem PC, I can't even get iTunes to recognize the podcast.
When I subscribe to the "original" .xml doc (not through FeedBurner), it works fine.
On the problem Mac, I can subscribe to the podcast. The episodes appear. But none of them will download. I get the exclamation point each time. Clicking on it reveals this message: "There was a problem adding ('Episode Name') to iTunes. The file might be corrupted, or a file type that iTunes cannot play."
When I subscribe to the "original" .xml doc (not through FeedBurner), it gives the same results.
The problem computers are both running iTunes 7.0.2 (15)
The 5 computers that work (Mac and PC) are running various versions of iTunes.
I've downloaded some random podcasts from the iTunes Store on the Mac. Some work. Some still give me the exclamation point.
I've downloaded some random podcasts (even others from FeedBurner) on the PC. Everything works - except the one I really need.
feeds.feedburner.com/upton
Can anyone help?

Leopard and the "Classic Environment"

I recently installed Leopard on my iMac. I have many very important files "locked" in "Apple File Security" in the O/S 9.2 Classic Environment. I now find out that the "Classic Environment" is no longer supported. I need those files. Can someone tell me how to get to them.
Any assistance is greatly appreciated..... Cholly

As I understand it, I have two 400 Firewire Ports on this iMac. If I buy an external hard drive and load Tiger onto that hard drive, that will also put the classic environment on the external drive. I transfer the files to that drive and I'm back in business. I can then use that new drive for "Time Machine" How am I doing so far?
Some minor bits of clarification. Tiger loaded on an external hard drive merely enables you to have Mac OS X and Mac OS 9 running side by side without rebooting. You'll still have to install Mac OS 9 on that external hard drive to gain access to the ability to run Note Pad, Outlook Express, Simple Text and Sherlock.
However, I would look at this as a transitional arrangement.
Time Machine will only run when booted into Leopard, but it certainly can see and backup all the data that is on your external hard drive with Tiger to a second Firewire hard drive connected to your second Firewire port, in addition to what's on your internal hard drive.
The following Mac OS 9 applications have counterparts in Leopard:
1. Outlook Express - Mac OS X Mail, Addressbook, and iCal.
2. Notepad - Stickies
3. SimpleText - TextEdit
4. Sherlock - Dashboard and Spotlight
5. Appleworks file security program - Apple Disk Utility
6. Appleworks - Appleworks 6.2.9
What I suggest doing once you get your setup with Classic running again, is
work on making that transition a reality so you don't have to keep switching back and forth and giving yourself confusion.
Also, please use this article to identify the machine you wish to install Classic on:
http://docs.info.apple.com/article.html?artnum=307124
This will tell exactly how to install Classic.

I have a new MBP with high-res display, and the color seems washed out compared to my old MBP. Is this normal?

Putting the two laptops side by side, blacks on my old machine look dark grey on the new one. I also have 24" and 27" cinema displays, and the new high res laptop display looks washed out in comparison.
I have tried to recalibrate the screen color settings, but this doesn't seem to make much difference.
Any help would be much appreciated!
Thanks,
David.

Yes, the gamma settings are the same on all 4 displays (my two laptops and the two displays).
After a little experimentation, I think that it's down to the brightness of the high resolution display. It would seem that it is slightly dimmer than the low-res one on my other 15" MBP, so I think that Apple have set the default colour profile to be slightly washed out to compensate. If I use the same profile on the high-res MBP screen as on the low-res MBP screen, then the colour is much better.
The cinema displays are a lot better than the laptop displays, but I was expecting the new high-res display to be as good as the old low-res one - especially as I paid a lot more money for it!
Ah well! I think I might take it into the store and just check that it is the norm for this...
Thanks for your help.

NodeManager Remote Start and the -classic flag

I've defined a Server and configured Remote Start configuration settings. However, I have need to pass the -classic flag in the arguments. This flag prevents the process from starting. Error follows:
Unrecognized option: -classic -Xmx256m -Dweblogic.Domain=i2Domain -Dweblogic.ProductionModeEnabled=true -Dweblogic.management.discover=false
Could not create the Java virtual machine.

This has been fixed after WLS 61 SP2 went out.
Either you can wait until SP3 or contact support for a one-off patch.
Kumar
Gregory Sulak wrote:
I've defined a Server and configured Remote Start configuration settings. However, I have need to pass the -classic flag in the arguments. This flag prevents the process from starting. Error follows:
Unrecognized option: -classic -Xmx256m -Dweblogic.Domain=i2Domain -Dweblogic.ProductionModeEnabled=true -Dweblogic.management.discover=false
Could not create the Java virtual machine.

Almost high def video and title menu coming out blurry when project completed

I have been using premeire elements 10 since it came out and have been happy until this week. I use elements to put together my daughters school performance for archival reasons. I am working on her latest play and act one was fine and clear when completed earlier this week. However, act two is coming out blurry, including the title menu and other texts and the burned dvd came out very blurry. I tried to compare act one and now the title menu preview is also showing a blurry video so I know the burning will be blurry as well. please help as I'm tired of always redoing the edits. thank you

Gwen
Thanks for the great news of your success. Well done.
Best give the Shake Stabilizer a good workout before making your final decisions. Major consideration there are resource demanding feature
and file must match the project preset before the Shake Stabilizer will work. Here is the link to the Adobe document on the new Shake Stabilizer
in 13. Note its recommendations for use.
https://helpx.adobe.com/premiere-elements/using/shake-stabilizer.html
I have two blog posts that you may be interested in, one is on Premiere Elements 13 First Look and the other on Premiere Elements 13 Daily
Discoveries.
ATR Premiere Elements Troubleshooting: Premiere Elements 13 First Look Details
ATR Premiere Elements Troubleshooting: Premiere Elements 13 Daily Discoveries
The first thing of note is the major change in workspaces going from 10 to 11, 12, and 13/13.1. Principles tend to stay the same from version to version, but
the features tend to get moved, deleted, or changed. As I typically write, it is very frustrating to be armed with principles when you cannot find
a feature that you are used to.
The following are some Premiere Elements 13 video tutorials. Some times a 12 one might be in there. To spot the non 13 ones, look at the headers
11 Quick and Expert
12 Quick, Guided, and Expert
13 eLive, Quick, Guided, and Expert
Except for the Premiere Elements 10/NVIDIA GeForce issue, I found10 to be a good version.
Best wishes to you and the family.
ATR

How do you extract data from ArrayList of Maps and the classical Iterator?

Hello guys.
I ran into this great doozie when I was coding this project I am working on. I have created a randomized question pool for a test so that no two tests with the same ID are alike. I grab a resultset from the DB and push the values through a randomizer. After that, then I stick a Map of the entire object into an ArrayList. Each object is then one complete question. So I have X objects (questions) in the ArrayList then (this is determined by a value in the DB in the test table).
I have the following code setup:
Map m = (Map)i.next();
          Iterator keys = m.keySet().iterator();
          while (keys.hasNext())
               key = keys.next();
               value = (String)m.get(key);
The key - data pair always comes out in the same order. What I am trying to do is populate a test (form values) for this. Is there a way that I can do this in JSP? The key map is 100% new to me.
I want to put the test into a table layout. the typical HTML boiler plate stuff is a cinch, but how would I get the information into a textfield? I can print out the key value pairs, but I guess I get lost in the logic when trying to get these to print in a specific order. Any help you can provide would be highly appreciated.
Kind Regards,
Josh

You can use the JSTL c:forEach tag for that.

WHY are they launching pre-order for a high demand phone and the customer service is CLOSED!!!

i made a spelling error in my address for my billing and shipping info (you know how streets have like Lane or Circle..well i live on a (street name) Run..and i spelled it Rn (forgot the U) and im afraid if i dont get it takin care of that they would dismiss my order for wrongful information...HELP!!!!!

Hello jporter313-
With Grand Theft Auto 5 potentially being the biggest game of the year, I can understand your frustration at not being able to place a pre-order online.
When we state that “We are not able to verify your information” on your order, that generally means that there is some piece of information on your order that is not matching up correctly. This can be something as simple as a spelling issue, and address that is not recognized as being deliverable or possibly that the billing information on your credit card doesn’t match what is on your BestBuy.com account.
I would recommend reviewing that information and make any adjustments necessary, including trying a different credit card if necessary. If that doesn’t work, the only other option I would be able to offer would be to pre-order your copy at your local Best Buy store.
You can also review the Conditions of Use for BestBuy.com here.
I apologize for any inconvenience that this has caused you.
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

HT5295 I have read the other comments of others with the same problem of downloading podcasts and submitted my comment,but there is still no fix to the problem.Does anyone know why the trouble has not been taken care of?Who is the person dealing with this

the podcast app is not fixed still wont download,did not find any solutions with anyones comments,they all have the same problem with this app.So how can you say the problem is fixed,get someone who knows how to really do something so it is not a recurring topic of frustration!!!!!

You might get more replies to this (but not from Apple, who you will recall, do not monitor these discussions) if you had posted in the Podcasts for iOS discussions, but never mind. At least in this post you've mentioned that your problem is with the Podcast App, something you didn't mention in your previous post. Consequently, my comments were based on "problems downloading Podcasts", not "problems with the new Podcast App".
(I don't use the new Podcast App, since I cannot install iOS 5 on my Touch. So I stick with the older method of listening to Podcasts on my iPod.) That said however...
It cannot have escaped Apple's attention that the new Podcast App has not been well received. Although these discussions tend to focus on what's wrong rather than what's right, it does appear that the App hasn't been well thought out.
In particular, the Auto Play feature, which - once an episode has finished playing, the "next most recent unplayed episode" will begin. Now, maybe I'm wrong but to me that means that it plays the Podcasts in reverse date order, so episode 19 will play after episode 20 and episode 18 after ep.19! That is how the iPod Classic plays Podcasts by default and the Classic forum is littered with posts from people who think this is barmy. (I think it's barmy too!)
I use an iPod Touch as well. Although not perfect, playing Podcasts on the Touch is far easier than on a Classic.
You are unlikely to find any "solutions" to the issues with the Podcast App, because the "solution" is for Apple to redesign it.
If you are assuming that the update of 25th july is a claim that it's fixed... oh dear! I notice that the App views, shown in the Store, still include that "tortoise and hare" screen with what appears to be the transport mechanism for a reel-to-reel tape deck. That alone tells me there is no real improvement to the App. It really is the worst graphic Apple have ever produced! I'll be surprised if anyone under 35 recognises that graphic as a reel-to-reel tape deck.
Actually, I have a question for you.
If you have the Podcast App installed on your Touch, does that mean that the previous method of listening to Podcasts has been removed from your iPod, or can you still access them in the Music App? If you can, abandon the Podcast App and use the old method. If not, please warn me in order that I don't purchase a new iPod Touch until Apple fix this!
Sorry I can't be the bearer of more positive news.

Installing podcasts and books onto my iPod classic

I downloaded books and a podcast onto my iTunes library, but cannot install them onto my iPod classic. I know that iTunes' babies are the iPod Touch, the iPad and the iPhone, but for some reason they still sell the classic and some people actually buy them.

With the iPod connected to your iTunes Library, look on the Device/Podcasts pane (tab) and select the Sync Podcasts button. Note also, the various syncing options for Podcasts. Then press Sync.
By the way, the Classic is still a leading and very useful iPod. It has far greater capacity than the iPod Touch. My 100GB music collection won't fit onto a Touch, so I have a 160GB Classic. I admit though, that I prefer the iPod Touch for Podcasts, and the Apps of course! So I own both, and I know I'm not the only one.
So that's why the Classic is still avaliable and why people actually buy it!

I am curious to how or if i can change the tool sizes on my program because I have a high resolution screen and my icons are almost unreadable?

I cant figure out if i can make my icons larger or not in this program. I have a high resolution screen and the objects are unreadable. Someone help me.

What version of AI? What system?`Older versions simply don't support High-DPI displays and there is no way to change this...
Mylenium

High Def Podcasts and the Classic

Similar Messages

Maybe you are looking for