High definition video with Geforce FX 5200 ?

hey guys,
can some body tell me if my MSI Geforce FX 5200 T128 is capable of high definition video e.g stretching small video window to full screen, in this mode you see bad video quality is there any solution ?

this is not a vga issue. if u get a video with 720x480 resolution and strength it, surely it will lose quality. for maximum resolution of windows, check the monitor and vga card´s manual for specifications.

Similar Messages

Qosmio G20 = Component Video Cable and High Definition Videos With Pinnacle

Dear Everybody
I bought my Qosmio G20-120 from Poland which came with D-video to Scart cable. This cable is only capable of transferring Video (CVBS) signals which is pretty useless because Qoismio has S-Video Output already... Which is better than simple Video Output that I can get from Scart.
According to www.toshiba-europe.com Qoismio has supposed to have Component Video output. But it comes with Scart cable instead. I am still trying to get this Component Video to D-Video cable from the distributor. If I wont succeed, does anybody know if and where I can buy this cable in Europe? Or is it possible to make a component video to D-video cable out of D-Video to Scart cable?
As last did anybody try the high definition DVB-S channels on Qoismio by using USB 2.0 DVB-S TV Card.Any opinions about Pinnacle PCTV 400e ??
Thank You

Yes I do live in Europe. But who says that Component Video Cable is a standart from USA or Japan. I have been using Component Video Cables to connect my DVD Player with my video projector since 2002. Component Video Cables are wisely used in Europe. And its the ONLY analogue way of transferring HD-Video (Plus DVI and HDMI)
What disturbs me alot is that on www.toshiba-europe.com they explain that my computer has:
Interfaces 1 x headphone
1 x DC-in
1 x line-in
1 x external monitor
1 x RJ-11
1 x RJ-45
1 x i.LINK (IEEE 1394)
4 x USB 2.0
1 x Monitor-in (line-in port)
1 x TV-antenna
1 x S-Video-in (Composite/Line-in)
1 x TV-out (s-video, Component-out))
1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick, Memory Stick Pro, MultiMedia Card, xD-Picture Card)
Where is the Component-out ???Promise is a promise. Why do they say it if they dont give it?
Instruction manual also says that : D-Video port lets you transfer 525i(480i),525p(480p),1125i(1080i) or 750p(720p) data to external devices.
How can you transfer 720p with a Scart Cable?? It is impossible.... The only way that Qosmio can transfer 1280x720 picture is a Component Video cable.(Because it has no DVI port) How much does this cable cost anyway?? But the problem is NOBODY is producing it in Europe. I am writing to Toshiba-Japan. Since they are saying that my computer has Component-out so they must get me the cable....

Can now with imovie 1.2.2 and iOS5 edit 1080p high definition videos from DSLR cameras like the EOS 5D Mark II on ipad 2?

Can now with imovie 1.2.2 and iOS5 edit 1080p high definition video from DSLR cameras like the EOS 5D Mark II on ipad 2?.
That would be great, you would open the door to professional video editing ipad 2. Is there an accepted camera list?.

There does not appear to be a list yet.
http://www.apple.com/support/ios/imovie/

Why isn't my high definition video converting to standard definition?

What I'm describing here, I've successfully accomplished many, many times using Premiere Pro CS5 and now Premiere Pro CS6. Now, for the first time ever, it's not working and I'm completely baffled. (This is a high-end Windows 7 64-Bit machine with 16GB RAM running Premiere Pro CS6.)
Here's a basic summary of my workflow. Nothing out of the ordinary here.
1. I shoot my video using a high definition camcorder (the same one I've been working with for the past year or two.
2. I import my high definition video into a 1920x1080 sequence in Premiere Pro CS6.
3. I edit my sequence until I'm happy.
4. I enter and name my Encore chapter markers in the sequence.
5. I create my Encore project and import the sequence as a timeline and set up my menus and such.
6. I build my Encore project, first into a standard definition DVD image file (so I can later burn SD-DVDs) and then build it again into a high definition Blu-ray image file (so I can later burn Blu-rays).
The Blu-ray burn is turning out just fine.
But the video in the DVD burn is all black. I can jump around from chapter to chapter and I can hear the sound, but the video doesn't show up!
I tried this a couple times thinking that maybe Encore just messed up the SD-DVD creation process but I got the same result each time. When I preview the project in Encore, it all looks just right.
So I figured, okay, something's not working when I import the sequence.
I went back to Premiere Pro thinking I'd just export my 1920x1080 sequence into a widescreen standard definition AVI and create a new sequence just for the standard definition DVD.
The exported AVI is black as well!!
I don't get it. Why on earth won't my high definition video convert properly to standard definition?
The high definition sequence looks completely normal in Premiere Pro. What could I possibly be overlooking??
One final note. Just as another test, I copied and pasted the sequence in Premier Pro, truncated it to a couple minutes (the full sequence is 90 minutes long), and exported to a widescreen AVI again.
It just finished, I tried playing it back in Windows, and it, too, is all black, sound but no video.
Like I said, this is nothing new for me. I've done it countless times with other projects. I could really use some assistance with this one.

So I exported my completed high definition sequence to an MP4 and re-imported back into Premiere Pro. Right-clicked it and created a sequence from the clip. Then I imported my chapters from the old sequence into the new one.
I returned to Encore, modified my project to work off the newly created sequence (what a pain having to recreate all the scene links) and voila, it had no trouble making a DVD this time.
So I guess I'll get out of the bad habit of my old routine and create a sequence the "right" way from now on. Funny how we get used to doing something one way and stop thinking outside the box after a while.
Jim, I don't see how that's necessary. As long as I create an Encore project based on a good high definition sequence, I have never had to do anything other than have Encore build a standard definition DVD based on the high definition sequences. It has always done the conversion for me and produced really good DVDs. Once I create a DVD image that I'm satisfied with, I simply have Encore build a Blu-ray image using the exact same project, and that works perfectly as well. I suppose I may be missing something here but it all works and works well, so I don't see a reason to create two projects when one works well.
On a separate note, is it just me or doesn't everybody think it's high time that Adobe offer a feature to import markers from one sequence into another. I can do it automatically but I have to use a macro that I created separate and apart from Premiere Pro. For that matter, I think Encore should also offer a feature to remap all scene links to a new sequence instead of forcing me to fix them one by one myself.
Anyway, thanks to all of you for pointing me in the right direction!

High Definition Video on MacBook Pro 13.3"

Hey guys...can't seem to find the answer, despite my best efforts. Can my MB Pro (bought brand new a week ago) appropriately display High Definition Video? In all it's glory? I have a HD copy of the movie Up, and it looks gorgeous, but I haven't been able to find any documentation or reliable info that states without a doubt whether or not its a feature of the machine I bought. Thanks!

I understand the concept that the Macbook Pro's with anything less than the 17" screen cannot display the full HD screen. However what if in my case it is connected to an external monitor. Is there a way to display High Definition thru the laptop onto my 32" TV, or does this still require the use of the 17" MacBook Pro?

Important quality loss in high definition video in Premiere

Hello
I'm working in a series of high definition clips in Premiere CS4, and I noticed a great loss of quality of the videos after rendering, even without applying any filter or special effect.
All of the videos were captured from a Sony HD camcorder in M2T format through HDVSplit. The M2T videos are perfect, with clear and crystalline images, typical of a HD clip.
However, after rendering in Premiere using the MPEG2 Blu-Ray HDTV 1080i or HDTV 720p format with all of the settings in high quality, the resulting video is disappointing, in no way resembling a high definition video. The same occurs using H.264 Blu-ray format, also with all the settings in "high".
The quality of the video is well below the expected, both in 1080i and 720p.
I didn't use any filter in the edition, just trim, simple transitions and some legends. The resulting video shows a significant loss of quality and definition, which resembles more a trivial SD DVD than a video that was totally recorded in high definition.
I believe that it is a codec problem, but I would like to know if somebody already observed this issue, and if some special adjustment or setting exist that I'm missing.
Any contribution is welcome
Thanks
Valter-Brazil

Do you mean rendering the timeline for playback, or rendering the video with a preset for output? You can start by making sure the quality setting in the program monitor is set to highest quality, not draft, or automatic. You can also check the Maximize Render Quality option. See the following taken from Adobe's website:
Maximum Render Quality option
You can improve rendering of motion, improve deinterlacing, and improve scaling of video. Select Maximum Render Quality in your sequence settings or Use Maximum Render Quality in your export settings.
If the resulting video from an export from Premiere is low in quality, then you need to adjust the bitrate settings, or resolution settings.

Will QT Pro Capture High Definition Video?

Does QuickTime Pro have the ability to capture high definition video? I have tried to do this with a Canon HV10 camcorder, but have not had any luck. I have been able to capture the video using iMovie HD 6.
Thanks
Kurt

Does QuickTime Pro have the ability to capture high definition video?No.

No Application for High Definition Video?

Hi Everyone,
Sorry for being in the wrong section, but I have a new camera with a high definition video and after importing the video I cannot play it as there is no application for it? The camera is a Panasonic Lumix. I have tried using VLC but to no avail.
Many thank in advance!
Vonnie

DVD Player (Applications folder.) DivX, a third-party player may also work. I'm sure you can find others at VersionTracker or MacUpdate. iMovie HD which is part of iLife.

High Definition video requires 1GHz G4 or faster...

iMovie HD 6.0.2 (267)
High Definition video requires 1GHz G4 or faster...
It was not evident that I could not use iMovie 6.0.2 on my TiBook. I don't care about HD, I just want to play around with iMovie. I've lost my initial Install disks after upgrading.
I purchased iLife to be able to just play with iMovie.
I can create a project and import video, not images...The buttons don't work. Pull down menus do. Can't drag clips to timeline...
Did I just waste $80.00?
867 MHz PowerPC G4 TiBook Mac OS X (10.4.6) 1 MB L3 cache, 1 GB SDRAM

Did I just waste $80.00?
No, it's probably not wasted...
So while your Mac may not be able to edit HDV it can
edit the "normal" video recorded by most camcorders.
In other words, iMovie HD can do all the stuff old
versions do, but it can do HDV too.
I actually don't even have a camcorder. I just wanted to import .mov files, etc.
There might be some other problem. Here's some topics
to look at:
http://discussions.apple.com/message.jspa?messageID=18
52869#1852869
http://discussions.apple.com/thread.jspa?messageID=206
6632

Capturing High Definition Video

When importing high definition video into iMovie HD 6 the last 1.5 to 2 minutes of my movie were not captured. When importing HD video the capture speed is less than real time and thus the video that is running on the camera is ahead of what you see on the computer. I stopped the camera - NOT the import - at the point in time where the camera reached the end of the footage I wanted to import. At this point in time iMovie displays a message indicating that is continuing to cache (import) the rest of the movie - which it did. If you stop the the IMPORT - then my understanding is that the video captured will be essentially stopped at the point you see on the screen.
Any thoughts?
Thanks
Kurt

Maybe you should try using the Scene-Detection Feature in imovie.
Click Here for more on this. Scroll to the bottom of the page.
Sue

High Definition Video playback in Keynote?

Can Keynote play back High Definition Video?
I'm not a video guy at all, so I'm not really sure of what precisely constitutes an "HD Video" file, but I do recall being given some Quicktime files a while back that were larger in file size, screen size and better resolution. These, I was told, were "HD."
Anyway, a client is asking if Keynote supports HD, and I'm at a loss...
- Nolan

I ran into the same problem. I had some picturess that had great detail. I put them into iMovie to get the "Ken Burns" effect, but when I shared them and used them in KN the lost their detail. I called Apple and the tech told me how to get HD images into KN.
In iMovie there are many options as to size and resolution when you use share. I think that I have used HD images stright from Photoshop to KN also. Hope this might help, somewhat late.

Viewing High Definition Videos

iMac 20 inch 2 GHZ
Is it worth paying extra to rent high definition videos vs. standard definition to view on my iMacs 20 inch screen. Is there a noticeable difference in viewing quality? I usually watch videos from about 8 feet away.

Thank you for taking the time to respond.
However, I did not mean to ask if the iMac was capable of playing high definition videos comfortably.
I meant to get opinions on whether high definition videos from iTunes are suppose to look noticeably better than standard definition videos on the iMacs 20 inch screen at a distance about 8 feet. I am thinking that the difference in quality is not noticeable because of the size of the screen and viewing distance.
I rented an HD version of the new James Bond flick and can't see much of a difference in quality between it and a standard definition video of The Office. I don't know if it is just because I am not a videophile or because of the size of the screen and viewing distance? I realize that tells me if it is worth paying extra, but I still would like to know your opinions on the difference in quality that you see.
I apologize for the confusion.

Playback trouble with *.m2ts high-definition video files

I just bought a new high-definition camcorder and downloaded files to my PC (Lenovo 3000 V200, 4GB RAM, CPU is 2GHz), but they playback in a choppy manner. Anybody have any ideas?
Could it be that my processor is too slow? If so, can I upgrade my processor?

I ran into the same problem. I had some picturess that had great detail. I put them into iMovie to get the "Ken Burns" effect, but when I shared them and used them in KN the lost their detail. I called Apple and the tech told me how to get HD images into KN.
In iMovie there are many options as to size and resolution when you use share. I think that I have used HD images stright from Photoshop to KN also. Hope this might help, somewhat late.

Only DVI with GeForce FX 5200

I just bought a Dual G5 1.8 off craigslist and this is the first non-integrated display computer I've owned (5 lappies later).
Purchased an Acer X223W (22in DVI input) and plugged it into the DVI port on the GeForce FX 5200. Turned on the display, then turned on the G5 and.... nothing. No video that is... the computer runs fine.
My question is this, is the DVI port only for second monitors, or should this work? I'd just stick in the system discs but joe craigslist couldn't find em and I've only got the ones that came with my macbook...
So before I go beg, borrow or buy some retail discs, I thought I'd check and see if this should work in theory
thanks!

Okay, I've been searching and searching and It seems like this should be possible (others seem to be running just off the DVI port).
I've got the discs and used them. I've zapped the pram and restarted with the discs but still no luck...
Any ideas on how to get this mac to recognize this monitor?

Using Sony High Definition Camcorder with Premiere Elements

My computer is a HP Pavilion Intel(R) Core(TM) 2 CPU, [email protected] GHZ, 1.59 GHz, 1.99GB of Ram. It is used solely for music(SONAR and Band in a Box) and photo/video(Adobe Premiere) software and never used online. My computer says that in my C drive I have 159GB of free space, total 224GB. In my D drive I have 376MB free space, total 8.63GB.
I have Adobe Photoshop Elements 3.0, plus Adobe Premiere Elements for Windows XP. (Old versions, I know)
Up until now I've transfered and edited what I've filmed and created productions with no problem what-so-ever in Adobe Premiere Elements using my Panasonic MiniDV camcorder. I now have the Sony HD (high definition)Handycam HDR SR11 and it's much more complicated to get my recorded images transfered to my Adobe software.
I can't figure out how to capture from the camcorder directly into Adobe Premiere Elements? I'm having to transfer it to my computer hard drive first and then add the media to Adobe Premiere. I have to record in SD (standard definition) to even do that.
Also, I can't figure out why the images once tranfered into Adobe Premiere Elements, are playing back misshaped (subjects are either elongated or short and chunky)?
Am I doing something wrong?
Doesn't my version of Adobe Premiere Elements work with this particular camcorder?
Is it just a matter of upgrading to a newer Premiere for high definition/standard definition camcorders to work? If so, which one?
Thanks for any help!
Carolyn

As stated by Peter use AVCHD Upshift from VASST or upgrade to PE7.
Also you need to set up your hard drives properly.
The best way is to have 2 seperate hard drives. One small one for the OS and all your other programms and another large one for all your work. Hard drives are never to be partitioned. This slows down the workflow.

High definition video with Geforce FX 5200 ?

Similar Messages

Maybe you are looking for