High DPI Monitor and install screen

Does Windows 10 regonize if you are on a high dpi monitor and resize the installation forms / drop down menus etc?
(It does not on windows 8.1)

Hi spacebug,
Thanks for your feedback and insight.
Your suggestion would give us more motivation to improve Windows.
Here I would suggest you post your feedback directly to our Feedback channel:
http://windows.microsoft.com/en-in/windows/preview-how-to#how-to=tab7
Alex Zhao
TechNet Community Support

Similar Messages

My Macbook pro 1,2 monitor and laptop screen goes black once in a while and then comes back on

Hello all,
Thank you very much for taking the time to view my issue. This issue just started about a month ago, I have a 22" LCD Monitor that I have been using, when this issue started the monitor would flicker and the screen would go black, but if I turned it off for a bit then turned it back on it would come back on. After a while it just started to go black and not come back on at all, so I decided to disconnect the monitor and use the notebook screen, I thought the monitor itself was broken. The notebook screen was working fine up until the last week, it is now doing the exact same thing, when my computer wakes up from being asleep it sometimes flickers then goes black, I can still faintly see the outline of the programs I have up but it is completely black. Sometimes it is a pain to get back on and I have to force shutdown and turn it back on to get it working. I am not sure what the problem is but I really want to get it fixed.
My Macbook Pro 1,2 is the first model made, but it was the best model available at the time. It has a Intel Core Duo 2.16GHz chip with 2GB of ram and a 160GB hard drive, it also has an ATI Radeon X1600 video card with 256mb of Vram. If anyone has any suggestions or resources I can use, I would greatly appreciate you sharing them with me.
Thank you very much in advance!
Sincerely,
Saggz.

Hey Fleurdemimi,
Thanks for the question. I understand you are experiencing issues with your iPhone 4s. Based on the information you have provided, restoring your iPhone in recovery mode may resolve your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

Dual Monitor and Full screen playback in Color 1.0

So, I was wondering if somebody could help me out.
I have 2 screens, one is a 23" ACD other is a 23" dell. I am going to be color correcting with my Matrox MXO setup on the 23"ACD. Whenever I do full screen playback the waveform monitor and vectroscope and all that jazz is not available anymore (obviously because of full screen)
So I was wondering what my options were:
1. Setup the waveform and vector scope to show on my primary display? (if possible, I'm not sure how to do it)
2. Do I have to get another graphics card and run three monitors?
3. If I Color grade with full screen playback disabled am I still utilizing the MXO for grading?
I am new to Color and how it works so I apologize if these questions seem "newbie-ish" of me.
Thanks

Isn't there a SINGLE MONITOR option in COLOR? Use that.
I don't think two graphics cards will work with Color, as Color relies on the card when it comes time to render. Might mess it up, or not work.
Shane

[Solved] no signal w/ second monitor and dual screen using nouveau, i3

Hi!
I just brought my old screen to my room and try to make it work. It works when the other one is not connected, so no hardware problems. The result is that I can go to the right and do stuff and move the window to my working screen, but the monitor stays black and says "no signal". I tried a long time with nouveau but without success. I was not able to make the graphic card work with the propretary driver from the website and I don't want to downgrade the xorg-server to 1.12 to install nvidia-96xx...
%lspci | grep VGA [0]
01:00.0 VGA compatible controller: NVIDIA Corporation G94 [GeForce 9600 GT] (rev a1)
%xrandr [0]
Screen 0: minimum 320 x 200, current 3200 x 1200, maximum 8192 x 8192
DVI-I-1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 60.0*+
1920x1080 60.0
1600x1200 60.0
1680x1050 59.9
1280x1024 60.0
1280x960 60.0
1024x768 60.0
800x600 60.3
640x480 60.0
720x400 70.1
DVI-I-2 connected 1280x1024+1920+0 (normal left inverted right x axis y axis) 376mm x 301mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 60.0
720x400 70.1
%cat .i3/config
### ommitted lines
# Multi-monitor setup
workspace 1 output DVI-I-1
workspace 2 output DVI-I-1
workspace 3 output DVI-I-1
workspace 4 output DVI-I-1
workspace 5 output DVI-I-2
workspace 6 output DVI-I-2
workspace 7 output DVI-I-2
workspace 8 output DVI-I-2
workspace 9 output DVI-I-2
workspace 0 output DVI-I-1
### ommitted lines
How I connect it:
%xrandr --output DVI-I-2 --right-of DVI-I-1
nl /etc/X11/xorg.conf.d/20-nouveau.conf [1]
1 # the left one
2 Section "Monitor"
3 Identifier "DELL"
4 Option "PreferredMode" "1920x1200_60.00"
5 EndSection
6 # the right one
7 Section "Monitor"
8 Identifier "NEC"
9 Option "PreferredMode" "1280x1024_60.00"
10 Option "RightOf" "DELL"
11 EndSection
12 Section "Device"
13 Identifier "nvidia card"
14 Driver "nouveau"
15 Option "Monitor-DVI-I-1" "DELL"
16 Option "Monitor-DVI-I-2" "NEC"
17 EndSection
18 Section "Screen"
19 Identifier "screen1"
20 Monitor "NEC"
21 DefaultDepth 24
22 SubSection "Display"
23 Depth 24
24 Virtual 3200 2224
25 EndSubSection
26 Device "nvidia card"
27 EndSection
28 Section "ServerLayout"
29 Identifier "layout1"
30 Screen "screen1"
31 EndSection
I don't know what I should try. I haven't tried yet the "old-school" Xinerama stuff, but it seems tedious and error-prone...unless someone tells me that it is actually a different and possibly working approach I'm not going to try it. Any hint is welcome! :-)
Best,
Marc
Last edited by Maximalminimalist (2013-11-20 09:57:44)

Hi!
Thanks for pointing out the repo..I did yaourt -Ss nvidia from the beginning and I didn't pay attention to the nvidia package. Sometimes archlinux is more user-friendly than one expects...
So now my second monitor works. :-)
Moral of the story:
If you want to use the NVIDIA driver, read
https://wiki.archlinux.org/index.php/Nvidia
And if it doesn't work, read
https://wiki.archlinux.org/index.php/Nvidia
again, because maybe you missed something...
Best,
Marc

W520 wont display 2 external monitors and laptop screen

Hi everyone.
I have previously had 2 external monitors working as well as my W520's screen, so 3 screens in total. A few days ago Windows 7 crashed with a BSOD and now I can only connect 2 screens at once.
Everyhting seems to be connected correctly as far as i can tell
This is the error I now get when trying to activate the 3rd screen.
Is there another driver I need to install to reenable the laptop monitor to work along witht the two external screens?
Any help is appreciated.
Like the song says... 'you dont know what you've got till its gone'.
Thanks
shane

Why isn't the second Acer external monitor (2 of 2) "checked" as well?
Don't you want all three screens in use??
How DID you have your monitors connected before the BSOD problem caused your current situation? Do you have the two Acer monitors daisy-chained via DP from the DP connector out of the K1000M on the laptop? And you were also using the laptop screen as the third? If so, I'd think that all three boxes would need to be checked in nVidia Control Panel.

My macbook pro 13" displays pink dotted screen on monitor and normal screen for the mac, how do I change it so that it has the same screen?

Hi
I have a new macbook pro, I have the adaptor to plug it into my LG monitor. It displays on the monitor but it is the pink dotted screen not the screen that is displayed on the macbook ?
I have gone to system preferences and I cant seem to find how to output the mac to the monitor ?
Cheers

Try:
System Preferences > Displays > ...
... and set the reolution back to the maximum.

2 external monitors and internal Screen on T430S and Mini Dock Plus

Hi Community,
I just got my new T430S and the MiniDock Plus. On the website I've ordered the combination I had the impression that I could use two external screens and the internal screen at once.
Unfortunately I don't manage to find the right settings to achieve that the internal screen is switched on.
I wonder if its just a question of settings or is it simply not possible to extend the screen over three screens.
Any help or hint is greatly appreciated,
Andreas

Intel 3000 doesn't support 3 independent LCD in this manner. You would need something USB2DVI or USB2VGA adapter to get the third LCD.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

High Resolution Monitor AND TV

I have a 15 inch Powerbook G4 and do a lot of Digital Photography. I want to get a larger(approximately 27 inch) display so I can view and share the photographs more easily with MAXIMUM resolution. I am wondering if I can do this and also watch High Def Cable TV on the same display? If yes, How?

Welcome to the family, thanks for closing your own thread.
I still can't figure out why the 'drop shadow' and 'motion blur' checkboxes had the same sharpening effect without rendering. < </div>
They force another level of RT processing.
bogiesan

Switching a projector between mac monitor and blank screen...

is it possible to switch the image projected by a digital projector between the screen i am seeing on my ibook and a blank/no-input style screen? i always used to be able to do this with a pc laptop. just so i can hide the screen from the audience temporarily while i look for files etc without having to unplug the whole thing!.... many thanks all.

anna_ed, Welcome to the discussion area!
No, the iBook only mirrors the internal display to the external display.

Windows can not manage to have different DPI 1080p and 4K monitor

Windows can not manage to have different DPI 1080p and 4K screen. However, it is impossible not to have a magnification of 1080p but 25-35% on Dell 4K (P2715Q) intimidate. Windows 8.1 increases on both screens. I have clicked out that it will not change
on both screens, and only on 4K Dell P2715Q.
I have Nvidia GTX 680 and latest drivers 347.88! Windows is 8.1 Pro with Mediacenter.

Hi,
Agree with you, quote from “Windows 8.1 DPI Scaling Enhancements” Windows blog.
“here have been some questions about when per-display DPI scaling is used (different DPI scaling values per display) and I wanted to add a note here to clarify. On Windows 8.1 when you have the “Let me choose one scaling level for all
my displays” check box checked (not checked by default) one uniform DPI scaling value is used for all displays.”
http://blogs.windows.com/bloggingwindows/2013/07/15/windows-8-1-dpi-scaling-enhancements/
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Intermittent bug in Touchpad One-Finger Scrolling with High-DPI display scaling

This one is quite strange (since it does not happen all the time) but very annoying - on my T420s (with 1600x900 screen) I am using 150% DPI scaling in Windows7 (Pro x64). Ultranav driver is 16.2.5.0.
I am using the preinstalled Chrome browser in a rather default configuration - and by default that program declares itself not High-DPI-aware and gets scaled up by desktop composition - something that can be changed in the properties from the compatibility tab, but which I keep like that since there are sites that look better this way!
Long story short - touchpad scrolling fails to work in more than 50% of the cases in that specific Chrome setup in a way that strongly suggests it is a bug where the touchpad scrolling program fails to account for the fact that Chrome runs "scaled-up" - if Chrome is maximized and the mouse is positioned in the top half AND left-half of the screen scrolling works as expected, HOWEVER when the mouse pointer is positioned (still 100% over the Chrome window) towards the right/bottom extremes scrolling fails and the Ultranav driver seems to send the scrolling messages to some other window than Chrome! (since it seems to fail to take into account the 150% scaling - so it gets wrong values with GetWindowRect and should probably use instead stuff like DwmGetWindowAttribute(hWnd, DWMWA_EXTENDED_FRAME_BOUNDS...))!
Steps to repeat the bug:
- Windows 7 machine, large-resolution screen with Custom DPI text size set to 150% and the older XP-style scaling disable (which enables the new DWM scaling)
- Chrome browser in default mode (which will use scaling); to repeat things easily the window should be maximized and the URL should be set to some long page on which scrolling can be performed
- scrolling should be enabled in Touchpad settings (I do not normally use ChiraMotion, but I do not think it makes a difference)
- mouse pointer should be positioned in the right-most 10% of the window and Touchpad One-Finger Scrolling should be attempted;
- in many/most cases the scrolling messages are sent to some other window beneath Chrome (but NOT always, so it seems there might be another factor in play)
- it is interesting that the different TrackPoint scrolling seems to work even in those conditions.

You won't get a response from Adobe in these user-to-user forums but you will be heard if you post your frustration via the official bug report form:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Don't expect a formal personal reply though.

On-premise High-trust App and 401 (appredirect.aspx) for anomyous user

Hello,
I've developed a provider hosted App. The App can be used by authenticated and anonymous users. On my development platform the App is working in both cases as expected. Then I configured a new test Server (I did all the steps for high trusted Apps) and installed
the new App (Register app, created a new package in Visual Studio, did the changes for the TokenHelper class and so on). Now, the App ist working for authenticated users only. For anonymous users the appredirect page is asking for credentials. The SharePoint
log contains only a few Information about the problem:
client_id: i:0i.t|ms.sp.ext|..... and instance_id:
https://xxx/Pages/AppPartPage.aspx?SPHostUrl=http%3A%2F%2FXXXXXXX%2FDE%2FSP2013Standard&SPHostTitle=SP2013%20Standard%20Layout&SPAppWebUrl=""&SPLanguage=de%2DCH&SPClientTag=1&SPProductNumber=15%2E0%2E4420%2E1017&wpId=g%5F5b8feaca%5F038f%5F473d%5F8001%5F0a91849f9a05&editmode=0&SenderId=1DD84F040
from query string
redirectLaunUrl after getting it from query string, web or app instance:
https://remote-domain-app/Pages/AppPartPage.aspx?SPHostUrl=http%3A%2F%2FXXXXXXX%2FDE%2FSP2013Standard&SPHostTitle=SP2013%20Standard%20Layout&SPAppWebUrl=""&SPLanguage=de%2DCH&SPClientTag=1&SPProductNumber=15%2E0%2E4420%2E1017&wpId=g%5F5b8feaca%5F038f%5F473d%5F8001%5F0a91849f9a05&editmode=0&SenderId=1DD84F040
redirectLaunUrl after getting token replacement:
https://remote-domain-app/Pages/AppPartPage.aspx?SPHostUrl=http%3A%2F%2FXXXXXXX%2FDE%2FSP2013Standard&SPHostTitle=SP2013%20Standard%20Layout&SPAppWebUrl=""&SPLanguage=de%2DCH&SPClientTag=1&SPProductNumber=15%2E0%2E4420%2E1017&wpId=g%5F5b8feaca%5F038f%5F473d%5F8001%5F0a91849f9a05&editmode=0&SenderId=1DD84F040
m_oauthAppId after NormalizeAppIdentifier() i:0i.t|ms.sp.ext|548...... Now getting app principal info.
decided that we need to do a POST to the app.
NOTHING MORE
The remote IIS web allows anonymous access and I can open the remote web site as anonymous user. Tried to set the the App Principal permission again, but without luck. When the remote web is stopped the 401 error still exist - no other error.
I've no idea what I can check next.

Hi,
You can use PowerShell to get the AppPrincipal.
$targetWeb = Get-SPSite "http://dev.my.com"
$clientID = "82ea34fc-31ba-4e93-b89a-aa41b023fa7e"
$authRealm = Get-SPAuthenticationRealm -ServiceContext $targetWeb
$AppIdentifier = $clientID + "@" + $authRealm
$appPrincipal = Get-SPAppPrincipal -Site $targetWeb.RootWeb -NameIdentifier $AppIdentifier
I suggest you try to delete the app and use the following PowerShell script to install the APP.
param
[string]$Web = $(throw '- Need a SharePoint web site URL (e.g. "http://portal.contoso.com/")'),
[string]$Source = "ObjectModel"
Write-Host -ForegroundColor White "-------------------"
Write-Host -ForegroundColor White "| App Installer |"
Write-Host -ForegroundColor White "-------------------"
Write-Host -ForegroundColor White "- "
#Global vars
$AppPackageName = "App.app";
#Loads powershell settings
Write-Host -ForegroundColor White "- Load Powershell context.."
$0 = $myInvocation.MyCommand.Definition
$dp0 = [System.IO.Path]::GetDirectoryName($0)
#Loads the SharePoint snapin
Write-Host -ForegroundColor White "- Load SharePoint context.."
$ver = $host | select version
if ($ver.Version.Major -gt 1) {$host.Runspace.ThreadOptions = "ReuseThread"}
if ((Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue) -eq $null) {
Add-PSSnapin "Microsoft.SharePoint.PowerShell";
[void][System.Reflection.Assembly]::Load("Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c")
#Imports the App package
Write-Host -ForegroundColor White "- Import app package '$AppPackageName'..."
$appPath = "C:\Projects\App\App\bin\Debug\app.publish\1.0.0.0" + "\" + $AppPackageName;
if ($Source.Equals("ObjectModel", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::ObjectModel);
elseif ($Source.Equals("Marketplace", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::Marketplace);
elseif ($Source.Equals("CorporateCatalog", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::CorporateCatalog);
elseif ($Source.Equals("DeveloperSite", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::DeveloperSite);
elseif ($Source.Equals("RemoteObjectModel", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::RemoteObjectModel);
$spapp = Import-SPAppPackage -Path "$appPath" -Site $Web -Source $sourceApp -Confirm:$false -ErrorAction SilentlyContinue -ErrorVariable err;
if ($err -or ($spapp -eq $null))
Write-Host -ForegroundColor Yellow "- An error occured during app import !"
throw $err;
Write-Host -ForegroundColor White "- Package imported with success."
#Installs the App
Write-Host -ForegroundColor White "- Install the APP in web site..."
$app = Install-SPApp -Web $Web -Identity $spapp -Confirm:$false -ErrorAction SilentlyContinue -ErrorVariable err;
if ($err -or ($app -eq $null)) {
Write-Host -ForegroundColor Yellow "- An error occured during app installation !"
throw $err;
$AppName = $app.Title;
Write-Host -ForegroundColor White "- App '$AppName' registered, please wait during installation..."
$appInstance = Get-SPAppInstance -Web $Web | where-object {$_.Title -eq $AppName};
$counter = 1;
$maximum = 150;
$sleeptime = 2;
Write-Host -ForegroundColor White "- Please wait..." -NoNewline;
$url = "$($Web)_layouts/15/appinv.aspx?AppInstanceId={$($appInstance.Id)}"
$ie = New-Object -com internetexplorer.application
try
$ie.visible=$true
$ie.navigate2($url)
while ($ie.busy)
sleep -milliseconds 60
$trustButton = $ie.Document.getElementById("ctl00_PlaceHolderMain_BtnAllow")
$trustButton.click()
sleep -Seconds 1
Write-Host "App was trusted successfully!"
catch
throw ("Error Trusting App");
while (($appInstance.Status -eq ([Microsoft.SharePoint.Administration.SPAppInstanceStatus]::Installing)) -and ($counter -lt $maximum))
Write-Host -ForegroundColor White "." -NoNewline;
sleep $sleeptime;
$counter++;
$appInstance = Get-SPAppInstance -Web $Web | where-object {$_.Title -eq $AppName}
Write-Host -ForegroundColor White ".";
if ($appInstance.Status -eq [Microsoft.SharePoint.Administration.SPAppInstanceStatus]::Installed) {
Write-Host -ForegroundColor White "- The App was successfully installed.";
$appUrl = $appInstance.AppWebFullUrl;
Write-Host -ForegroundColor White "- The App is now available at '$appUrl'.";
Write-Host -ForegroundColor White "- (Don't forget to add app host name in your host file if necessary...).";
Write-Host -ForegroundColor White "- "
else {
Write-Host -ForegroundColor Yellow "- An unknown error has occured during app installation. Read SharePoint log for more information.";
More TroubleShooting Tips for High Trust Apps on SharePoint 2013
http://blogs.technet.com/b/speschka/archive/2012/11/01/more-troubleshooting-tips-for-high-trust-apps-on-sharepoint-2013.aspx
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Dennis Guo
TechNet Community Support

Right side menu too small font size of letters in Windows 8.1 High DPI screen

Hi, I just own a new laptop with Windows 8.1 and high resolution screen.
When I start Adobe Reader, the document area seems to be readable, with "normal size fonts", but the options menú in the right side uses a very small fonts size and is hardly readable.
I tried to change it using the Windows "change menu, title, icons size, but withpout success.
Any solution for it?
By the way, in a Lenovo Ideapad U430 Touch, there is not "magnyfying glass" combination key and the zoom function of the touch screen doesn't work either in that right side menu área (it works in the document area, not in the right side menu area).
Any help will be welcomed.
Thanks.
Javier

Hi, Pat, test done.
Thanks for your suggestion, it was somehow helpful, or, let say, half and half.
It was helpful in the way that when I opened the preferences Windows I was not able to see the full window, there was a part of the right side of the window that was out of the screen. So, when I changed the "scaling settings options and behaviour" from "Auto" (default value) to 100% everything was in the display.... So, this was of high help.
BUT I was not able to find any way in all the suggested document for making the fonts used in the right window of the Adobe Reader, the one where the "Tools" and "Comments" menus are displayed more readable, bigger size, than the one that the product uses by default in the High DPI display.
So, thanks for the suggested document that helped to solve the first point.
BUT
Any other idea that could help for changing the fonts used in the "Tools" or "Comments" menu window?
Thanks and kind regards.
Javier

Windows not scaling dpiAware programs correctly on high DPI screens

I just upgraded to a new notebook with a high dpi screen (3200x1800)..
In the standard desktop (not modern), several programs do not display correctly- specifically Adobe programs, Sony Vegas, Sorenson Squeeze, etc..
The type and fonts for the menus etc are scaled properly, but the UI icons are extremely tiny.
See here.. The red boxed areas are what size the icons SHOULD be:
http://tinypic.com/r/nb82l5/8
If I edit the manifest for each .exe and change
dpiAware to FALSE, everything scales fine but is blurry (sections inside red box from link above)
If dpiAware is already true in the program, why isn't windows scaling the program interface icons correctly?

Hi,
Please check and uncheck the following option to see the result.
Also,please use a external display device to test it.
Regards,
Kelvin Xu
TechNet Community Support

Firefox ignores Windows 8's compatability setting for high dpi screens.

I recently tried the Windows 8.1 Preview, but then reset my machine to Windows 8 again.
Before this, the first time I installed Firefox, it ran at a low resolution, so all the toolbars and content appeared huge and blurry. I fixed this with the Windows 8 compatibility setting disable display scaling on high DPI settings"
After resetting the machine, and installing Firefox again, it was back to being blurry, so I changed the compatibility setting again, but this time, nothing happened. Even with the setting on, Firefox ignores it. Every other program with this setting works fine, and Firefox worked fine the last time around.
I was advised in the Windows support forums to ask the question here.

You can modify the layout.css.devPixelsPerPx and increase or decrease the value in 0.1 or 0.05 steps to adjust the size of fonts and other elements in Firefox.
*The layout.css.devPixelsPerPx pref is a String value parsed to a float and allows to fine tune the dimensions of all elements (user interface and web pages) more precisely (resolution 0.1 or 0.05).
*Change the default value -1 to 1 to make it work like in previous Firefox versions (100%)
Start with a value of 1 and adjust this value with 0.1 steps or 0.05 for finer adjustments.
*Use values between 1.0 and about 0.5 to reduce elements in size (do NOT go all the way to 0.05!)
*Use values greater than 1.0 to magnify and make elements larger (percentage divided by DPI, % / DPI).
*http://kb.mozillazine.org/about:config
If web pages needs to be adjusted after changing this pref then you can look at the Default FullZoom Level or NoSquint extension.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
Use this extension to adjust the font size for the user interface:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

High DPI Monitor and install screen

Similar Messages

Maybe you are looking for