High End camera for Adobe Connect??

Hello,
Just wondering if anyone had any suggestions on a tripod
mountable camera for Adobe Connect? preferably something with USB
interface...saw a number of mini DV cameras but alas that format is
being phased out. Suggestions appreciated. Thanks

I use a small 3 CCD Sony DCR-HC1000 miniDV camcorder on a 7" tabletop tripod (with tilt arm) so I can get good views of everyone around the conference table. It's nice to be able to easily adjust exposure, since I use rooms with windows and have a wide variety of skin tones among my participants. I use firewire to a laptop for video and Universal Voice with a Polycom SoundStation 1000 for audio.

Similar Messages

Higher end camera for Connect?

I was curious if anyone has had luck or a recommendation getting a higher end camera (non web-cam) to work with Connect? Something like a mid-range consumer hand-held camera or something along those lines. I am using the Cloud version of Connect on Windows PC's. I'd like to have a better quality camera with pan/zoom capabilities that we can mount on a tripod... USB would be preferable, but I believe our connection machine also has a firewire port. Anyone have any success stories or brands/models they can share?

Now-a-days, most high-end video cameras are only equipped with HDMI out instead of instead of firewire. If your computer has Thunderbolt, consider Blackmagic Ultra Studio Express. This device can capture HDMI (from the camera) and export via Thunderbolt to the computer. It's best to use Thunderbolt > Firewire versus USB since the two former methods allow for a higher rate of data transfer versus the latter which will result in loss of frames.

Other video cards for Adobe Connect?

Hi!
I am new here in this forum.
I just want to know what video cards that I can use for Adobe Connect? I read that I can use Osprey, but do I have other choice?
Also, is Connect limited to SD signals only? What if my source gives out HD? Is there a way for me to use this HD signal?
Thanks in Advance...

You're talkign about video capture / input devices, right?
You don't want to try to run HD video through your PC into a webcam pod.
The Osprey is recommended because it has a hardware encoder chip - does not kill the CPU on the computer trying to compress the data...
But you can use things like the Dazzle HD USB connected unit. I've done this. Make sure you have a dual core computer, 64bit OS, and don't run a lot of other apps - or you'll see frame drops in the camera feed.
Video cameras that have a 'monitor mode' and connect to a PC via FireWife can also work.

Can I create a custom setup test for Adobe Connect Pro?

I was wondering if there was a way to create a custom setup test for Adobe Connect Pro? We are using Adobe Connect to teach some web courses and we need them to complete the Adobe Connect test as well as some other software setup tests. Due to the fact that we are using a company wide account for Adobe Connect the "Send Results" button on the setup test doesn't reach me (I am the one in charge of making sure all students have taken all the setup tests). Typically we have them take a test and then return back to the main 'test' page where they select whether or not the test worked.
In the end I figure I have two options:
1. Change the test so that it emails the responses to the email of my choice, i.e. a custom version of the setup test. (Not sure if this is possible as we use a company account)
2. Completely remove the "Send Results" button from setup test and just rely on the student manually entering whether the test worked or not.
Please help!

The timecode effect can only show whole frames so there is not a setting for 23.97. I'm not at my editor at the moment, is there an option for 'drop frame' in the timecode settings, this is how timecode is displayed for non whole number frame rates.

How do I cancel a trial for adobe connect

I have a trial for adobe connect I want to cancel. How do I do this?

Hi Scooby9471
Please contact Adobe Support,
you are welcome to contact our support team at http://adobe.ly/yxj0t6

I need to upgrade to 10.9 but not 10.10 for Adobe Connect 9.3. I can't find 10.9 in the App Store. Where can I find it?

I need to upgrade to 10.9 but not 10.10 for Adobe Connect 9.3. I can't find 10.9 in the App Store. Where can I find it?

Hi ..
Make sure your Mac can run Mavericks > OS X Mavericks: System Requirements
v10.9 Mavericks no longer available from the App Store but may be able to acquire a redemption code from Apple via email.
Open the App Store. Select either Features, Top Charts, or Categories in the menu top of the window.
Then click Support under Quick Links right of the App Store window then click Contact Support.
Once you have the redemption code, click Redeem under Quick Links.

Please beware that this forum is for Adobe Connect users and not ConnectNow users

These are two very different technologies built on different technology stacks. ConnectNow is a free offering.
Support is limited for ConnectNow. Please use this forum for Adobe Connect issues as issues with ConenctNow would not be applicable here.

Reposting to bring this back to the top.
Any questions on topics other than Oracle Help technologies -- Oracle Help for Java and Oracle Help for the Web -- will not be seen by the appropriate people and will not be answered.
For help with other Oracle products or technologies, please find the appropriate forum at:
http://forums.oracle.com/forums/index.jsp
-brian
Oracle Help Team

Change http port for Adobe Connect Pro?

I'm running Adobe Connect Pro 7.5 and would like to change the HTTP port Adobe Connect Pro uses. I've changed this from 80 to 90 in the Adobe Connect Pro console and saved. Then restarted my Adobe Connect Pro application. When I go to the URL http:\\<servername>:90 I get a "Connot Connect to Webpage" error. If I change it back to 80 the URL http:\\<servername>:80 works.
Does anyone know how I can change the port for Adobe Connect Pro 7.5? Is there another step I need to do on my Windows 2003 server?

I've had to "cache" uploaded videos by playing them shortly before the audience will see them. For me, the cache holding time when using Adobe's servers is about 5 minutes.

Video Capture Card for Adobe Connect

Does anyone have any recommendations for a video capture card for the Mac to use with Adobe Connect? I have a HD camera that I want to connect to my Mac through the S video connection on the camera. I need a video capture card that will work with Adobe Connect.

The Video Telephony Pod is the video pod when Video Telephony Conferencing equipment/cameras are configured to talk with Adobe Connect. This was introduced in Connect 8.1 for SIP and H.264 based VTC systems. It will only work with H.264 video streams from the VTC type cameras found in conference rooms. Usually the major players in the U.S. are Polycom and Tandberg.
The VTC Pod appears as a standard pod once the administrator of an Adobe Connect on-premise server has configured the various admin screens and added the SIP addesees to the configuration xml file.
The video quality is different than the webcam video as here is a table:
Tandberg 990:
Profile Level At FMG End
Video Out At Device
High
1200.0kbps 448p
Medium
600.0 kbps   448p
Low
250kbps       CIF
Tandberg Edge 95 MXP:
Profile Level At FMG End
Video Out At Device
High
1700 kbps w720p
Medium
600kbps    w448p
Low
250kbps    w288p
More information on formats:
768 x 448@30fps (w448p)
576 x 448@30fps (448p)
512 x 288@30fps (w288p)
352 x 288@30fps (CIF)
176 x 144@30fps (QCIF)
So, that HIGH, MEDIUM and LOW refer to the Adobe Connect room preference setting for video. Notice that HIGH shows we can deliver 720p resolution.
The normal webcam video pod is locked to 480p (VGA) 4x3 resolution at 20 frames per second but the server admin on an on-premise install can alter a configuration xml file to go 24 fps but not higher than VGA on the webcam pod.
Probably more than you ever imagined I would share but that's my style.
Take care.

Problems with my Microsoft Surface 2 video Camera and Adobe Connect

Hi,
I have a new Microsoft Surface 2 that I am trying to get to work with Adobe Connect. I enable the camera and see the box for it in Adobe Connect but the box only has black in it and not an image. Does anyone have any ideas?
Thanks!
Dale

Hi dkalsow,
Does Preview on video pod shows the video feed from you camera.
Also make sure if it is being detected by Flash's Settings dialog.
you can check that by right clicking when meeting is opened and click on camera icon and check
thanks
Nikhil

How to generate a SSL certificate for Adobe Connect?

My organization uses adobe connect across the internet and we
would like to enable SSL on the server. I have instructions for
enabling SSL once a CSR is generated, but I do not know how to
actually generate the CSR using Adobe Connect.
Any info on how to generate a SSL CSR would be great,
thanks.

There is no 'built-in' method in Connect to do this. We used
a open-source product called OpenSSL to generate our CSR file for
Connect. Just Google OpenSSL and download/install it (it's free).
Then use something like this command for creating a cert:
openssl
req -new -key <exisiting private key file> -out <csr
file you want to make>
Example:
OpenSSL> req -new -key privatekey.pem -out connectcert.csr
After you get the new certificate from the CA, put in
d:\breeze directory. Then update the adaptor.xml file with the new
cert name (make sure backup the existing file).
Make sure you REBOOT the server to enable changes! Simply
restarting services will not work.
Hope this helps!

Problem with the flash players version for adobe connect

Hi, i install the flashplayer version 11 on my computer but adobe connect ask me for flash player 10.3.
Is there a problem with adobe connect with the flash player 11 ?
thansk
[email protected]

Try the Flash forum.

Outlook Add-in for Adobe Connect ( win 7 64 bit )

Is there an Outlook add-in for Win 7 32 bit users that works with Adobe Connect 8 ?

Yes, the Outlook add-in for 32 bit Outlook for 64 bit Windows 7 is in internal beta testing for release very soon. Hopefully by the time Adobe Connect 8.2 is released soon.

Patch for Adobe Connect 8

I received a notification that our meeting rooms will have a patch applied to them this weekend, but I've been unable to find any documentation about this patch. Does anyone know what issues will be addressed in this patch?
We're currently running 8.2.0.0 with Add-in 9.4.81.0.
Any help would be much appreciated. Thanks.

What patch is being applied? If you are hosted, and the patch is 8.2.1.3, then the information regarding that patch can be found here, http://helpx.adobe.com/adobe-connect/kb/connect-8213-release-notes.html, and that link should be in the email Adobe sends out.
The update notes for the update 8.2.1.0 can be found here: http://helpx.adobe.com/adobe-connect/release-note/release-notes-connect-8-service.html

Building Web Apps on Adobe Coldfusion for Adobe Connect.

I'm looking for resources pertaining to development of web apps such as Widgets using Coldfusion 9 directed for use on Adobe Connect 9. The only resource I'm aware of right now is the Collaboration Builder Toolkit SDK, but that is specifically for development with Flex and Actionscript.
http://help.adobe.com/en_US/connect/9.0/collaborationbuildersdk/connect_9_collaboration.pd f
I'll gladly accept Flex + Actionscript as my goal if there are benefits of doing so. Right now I'm looking for and HTML5 or CFML solution if possible for this project.

i'm using chrome on windows 8.
here a screenshot on Muse:
here the preview on chrome
as you can see it even changes the way the words are dislayed in each box (check the last line, 3 words on the muse version, 4 words on the browser version).

High End camera for Adobe Connect??

Similar Messages

Maybe you are looking for