High Latency in Windows 7 64Bit on MacBook Air 2010 NVIDIA with DPC Software

High latency in Windows 7 that is interrupting sound on BootCamp partition with NVIDIA Drivers
3000us all the time
I can't use my interface with it.
Anybody know how to fix it?

Thanks for posting the pictures...it makes it much easier to see what's going on.
First off, use the proper Focusrite ASIO driver, not ASIO4ALL.  Make sure you have the latest driver installed, available here:  Downloads | Focusrite
Then, on the screen shown in your first picture, use the slider on the Focusrite control panel to change the Buffer length to the lowest setting at which you can get reliable recording and playback.  It's currently set to 10ms which is 480 samples (as shown in the Audition Preferences/Audio Hardware panel.   I tend to use 128 samples which is between 2 and 3 ms but exactly what works for you will depend on all sorts of factors.  Some people like to use a low setting for recording and the highest possible setting when mixing a multitrack session.
Finally, for pretty much all recording, I'd recommend the use of the Direct Monitoring feature on the 2i2 rather than trying to monitor via a round trip.

Similar Messages

  • Cannot install Windows 8 on MacBook Air

    I am trying to install Win 8.1 Pro with Boot Camp on a 13 inch MacBook Air (early 2014) with 4G RAM and 256G storage. The machine is a new purchase and the OS was upgraded from Mavericks to Yosemite before attempting to use Boot Camp.
    I have made a number of attempts at this using both a USB/ISO and DVD in an external drive (non-Apple). All attempts fail at the same point where Windows setup attempts to install on the BOOTCAMP drive. The message is “Windows cannot be installed to this hard disk space. Windows must be installed to a partition formatted to NTFS.” There are 4 hard disks listed
      Drive 0 partition 1:EFI   200 MB    173 MB freeSystem
      Drive 0 partition 2        53.4GB      0.0MB free Primary
      Drive 0 partition 3         619MB       0.0MB free Primary
      Drive 0 partition 4:Bootcamp 179.5GB     179.5GB free Primary
    On returning to OSX after this the Air works fine and Disk Utility has a Macintosh HD (57GB) and Bootcamp (format is MS-DOS FAT32) (192.7GB).
    I have tried the following:
    1. Ensuring that there was only one external device attached ie the USB created by Boot camp
    2. Swapping the USB port ie have used both USB ports
    3. Trying to install Win from a DVD
    4. Different partition sizes
    I am at a loss as to what to do next. Any suggestions welcome.
    Bernard

    1. Select Partition4: Bootcamp. You should see advanced Options.
    2. Click Format and convert the partition to NTFS.
    3. Click Next.
    Reference - http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
    See Page 6.

  • HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

    Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

    It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
    You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
    Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

  • After start Windows 8 on Macbook Air (late 2011) all freeze.

    When I start Windows 8 on Macbook Air (late 2011) all freeze. If I switch off Wi-Fi adapter or power unit problem does not exist. Do you have same problem?

    Here's how to fix the problem.
    Macbook air 2011 freeze fix
    1. Install Windows using Boot camp on battery power (AC adapter unplugged).
    2. After the installation, right click on the power icon.
    3. Click More power options
    4. Click change plan settings for the balanced plan
    5. Click change Advanced power settings
    6. Select "PCI Express"
    7. Selct Link state power management
    8. Change Plugged in from Moderate to OFF.
    Done! No more crashing. Now you can plug in your AC adapter.

  • Windows 8 on macbook air

    Anybody aware of any challenges installing Windows 8 on Macbook Air? Just want to ensure that all audio, video and all ports continue to work when installing Windows 8. Don't want to take the plunge without getting some advice, since the system requirements don't list Windows 8 as supported.

    The best way I got windows 8 to work was to install windows 7 and all the bootcamp drivers etc as directed by Apple, then install windows 8 and select keep previous programs
    You may still get a couple of errors (bluetooth/trackpad and maybe video) but you can fix these simply by reinstalling the drivers, or rollback if a windons upgrade has over written the previous ones or by manually selecting your old windows 7 area that is kept when you upgrade to 8 (only delete windows 7 once you are happy)
    If you try and do a clean install of windows 8 bootcamp will not be installed (in the system tray) so none of the keyboard options or remapping will work or your backlight keyboard, even if you edit the bootcamp file so it will run in windows 8 to fix some of the drivers, bootcamp will not be installed
    You will not have the option to change some of the options in bootcamp system tray in windows 8 as it will show an error so only the default 2 finger scrolling etc is available, but it's enough for the function keys, sound, dimmer etc all to work ok
    How do I know this? I upgraded from 7 to windows 8 and had no problems, I then upgraded my SDD and had to reload everything from scratch, it took me several permutations (only windows 8,  windows 7 then 8, IOS and windows 8) till it was ok with IOS, windows 7 then 8. I also ran the system speed test on each permutation and the last one was the best which had something to do with Apple video drivers and chipset drivers IMO opposed to the ones windows 8 installs

  • How to install windows 7 on macbook air 13" 2014

    I try to install windows 7 on macbook air 13" 2014, OS X Yosemite, i used flash 16GB and windows 7 image iso. but i got this error. please help me to fix this.
    Thank you so much.

    Is the USB devices a USB2 or USB3 device? Please run Disk Utility Repair. In some cases, re-installing OS X (which does not modify your files) also addresses this issue.

  • Solution to install Windows 7 on Macbook Air MID-2013 after 3 weeks of test, make with ISO image a usb key 2.0, It works!

    Solution to install Windows 7 on Macbook Air MID-2013 after 3 weeks of test, make with ISO image a usb key 2.0, It works!

    1. Select Partition4: Bootcamp. You should see advanced Options.
    2. Click Format and convert the partition to NTFS.
    3. Click Next.
    Reference - http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
    See Page 6.

  • Can a 128 ssd storage still effectively work if I install windows 8.1 plus msoffice and a window-based proposal system? I plan to buy a macbook air entry level with 1.7 gh i5 processor.

    Can a 128 ssd storage still effectively work if I install windows 8.1 plus msoffice and a window-based proposal system? I plan to buy a macbook air entry level with 1.7 gh i5 processor.

    If you are going to use Mac OS X and its associated applications, and a BootCamp partition with Windows 8, and MS Office and all of the work created there, you will more than likely run out of space on a 128 GB SSD pretty quickly...especially if you put any music, photos or videos on it.  Those things take a lot of space so you will have to be very, very careful about what you want to put on a 128 GB storage space.  You would be better off going for 512 GB with what you plan on doing with it.

  • I accidentally erased mac os 10.6 while installing windows 7 on macbook air, how do I install back to mac?, I accidentally erased mac os 10.6 while installing windows 7 on macbook air, how do I install back to mac?

    I accidentally erased mac os 10.6 while installing windows 7 on macbook air, how do I install back to mac?, I accidentally erased mac os 10.6 while installing windows 7 on macbook air, how do I install back to mac?

    Use the Flash Drive that came with your computer it has Snow Leopard installed on it. If you lost it or cannot find it then call Apple and they will replace it for you, I don't know how much they will charge.
    BTW when installing MS Windows please follow the directions whether you are using Boot Camp or a vitualialization solution (Parallels, Fusion, etc.) had  you done this you would not have had any issues.

  • How can i install windows on new macbook air using remote drive on the bootcamp partition

    Hi all, I just purchased a new macbook air mid - 2011 with OSX-Lion installed on it. I wish to install Windows XP on the boot camp partition but have not purchased the external super drive. Is there some way that I can install windows on boot camp using remote drive of my other macbook pro system.
    If this is possible, then please guide me.
    Thank you,

    Since I do NOT use anything from M$, I am afraid I am not right person to help you.
    I would suggest that you post your question for help over in the BootCamp forum loacted here
    https://discussions.apple.com/community/windows_software/boot_camp
    Allan

  • I accidentally erased OS X while installing windows 7 on MacBook Air, how do I install back to OS X?

    HELP!!!! I accidentally erased OS X while installing windows 7 on MacBook Air, how do I install back to OS X?

    Use the Flash Drive that came with your computer it has Snow Leopard installed on it. If you lost it or cannot find it then call Apple and they will replace it for you, I don't know how much they will charge.
    BTW when installing MS Windows please follow the directions whether you are using Boot Camp or a vitualialization solution (Parallels, Fusion, etc.) had  you done this you would not have had any issues.

  • Installing windows 7 on MacBook Air 2013

    How to install windows 7 on Macbook Air 2013.

    How to install Windows on Mac:  http://lmgtfy.com/?q=How+to+install+Windows+on+Mac

  • Is it safe to install windows 7 in macbook air which just have 128gb of memory with vmware?

    is it safe to install windows 7 in macbook air which just have 128gb of memory with vmware?

    You need the USB SuperDrive or an USB disk to install Windows on the computer

  • How to unistall windows 7 from macbook air bootcamp?

    Dear all,
    I'm from new macbook user. how can i remove windows 7 from macbook air bootcamp? After removing windows 7, can i use free partition (windows 7 bootcamp) from Mac OS?

    In OSX use the BootCamp Assistant again to revert the partitioning back to one single OSX-volume.
    That deletes the Windows partition and reassigns the used diskspace back to OSX.
    Stefan

  • HT3986 Can anyone help me to get the Tack pad drivers for windows 7 on mAcBook Air..

    Can anyone help me to get the Tack pad drivers for windows 7 on mAcBook Air..

    If you've created the Windows 7 Drivers CD/USB drive, using Boot Camp Assistant in OSX, the drivers should be on there. My MacBook Pro (2010) touchpad works fine with those drivers installed, and I think it's identical to the Air's.
    http://support.apple.com/kb/HT4407 for info on how to create this drive.

Maybe you are looking for

  • ITunes 10.6.1.7 unstable

    After upgrading to iTunes 10.6.1.7, I'm experience 2 new issues: iTunes periodically crashes, generating a Windows error report and has to be restarted.  This appears random as I'm not actually doing anything in iTunes when the crash occurs - it is j

  • Leopard cannot be installed on MacBook Air

    I have not been able to install Leopard on my MacBook Air because of an error message "Mac OS X cannot be installed on "Macintosh HD", because this disk cannot be used to start up your computer." I have gotten this message when trying to install Leop

  • Associating icons to folders questions (Mavericks)

    I am trying to understand how icons work in OS X Mavericks for custom folders.  Can someone explain how .icns files are 'linked' to folders?  I am seeing something odd (at least to me, since I'm new to Mac) and it doesn't make sense. Please try this

  • Change of principal switch

    Hello, We have to fabrics with MDS9513 directors. Yesterday we got a change of principal switch message and the VSANs notice on one of the fabrics. Everything continued to work normally. Is this a normal occurance? What could be the reason? Is it a s

  • Formula FOX erase plan values

    Hi all; I have a problem with a FOX formula. The goal of this one is to distribute the Quantity of Sales (ZG_QVV010) planned by Sub-Brand (ZSUBMARCA) to the Material according to a distribution key (ZCHDIST). I have the following formula: DATA CD TYP