High memory occupied in WLC

My customer has a problem with the memory in his WLC. The process Dot1x_NW_MsgTask_0 is occupying 83% of the memory. This percentage does not lower. What can be?
Rds,
Emilio Ramos

Hi Abdullah,
The customer has two controllers. One called "WLC Brasilia" and another called "WLC São Paulo". Follows informations about Memory Utilization, Cpu Utilization and Client Count of both controllers. The customer got the data from WCS Server. The informations are separeted in "last 6 months" and "last days".
Last 6 Months
WLC Brasília
WLC São Paulo
Last Days
WLC Brasília
WLC São Paulo

Similar Messages

Very high memory usage..possible memory leak? Solaris 10 8/07 x64

Hi,
I noticed yesterday that my machine was becoming increasingly slow, where once it was pretty snappy. It's a Compaq SR5250NX with 1GB of RAM. Upon checking vmstat, I noticed that the "Free" column was ~191MB. Now, the only applications I had open were FireFox 2.0.11, GAIM, and StarOffice. I closed all of them, and the number reported in the "Free" column became approximately 195MB. "Pagefile" was about 5.5x that size. There were no other applications running and it's a single user machine, so I was the only one logged in. System uptime: 9 days.
I logged out, logged back in, to see if that had an affect. It did not. Rebooted and obviously, that fixed it. Now with only FireFox, GAIM, and a terminal open, vmstat reports "Free" as ~450MB. I've noticed if I run vmstat every few seconds, the "Free" total keeps going down. Example:
unknown% vmstat
kthr      memory            page            disk          faults      cpu
r b w   swap free re mf pi po fr de sr cd s0 s1 s2   in   sy   cs us sy id
0 0 0 870888 450220 9 27 10 0 1 0 8 2 -0 -0 -0 595 1193 569 72 1 28
unknown% vmstat
kthr      memory            page            disk          faults      cpu
r b w   swap free re mf pi po fr de sr cd s0 s1 s2   in   sy   cs us sy id
0 0 0 870880 450204 9 27 10 0 1 0 8 2 -0 -0 -0 596 1193 569 72 1 28
unknown% vmstat
kthr      memory            page            disk          faults      cpu
r b w   swap free re mf pi po fr de sr cd s0 s1 s2   in   sy   cs us sy id
0 0 0 870828 450092 9 27 10 0 1 0 8 2 -0 -0 -0 596 1193 570 71 1 28
unknown%Output of prstat -u Kendall (my username ) is as follows:
   PID USERNAME SIZE   RSS STATE PRI NICE      TIME CPU PROCESS/NLWP
2026 Kendall   124M   70M sleep   59    0   0:01:47 1.4% firefox-bin/7
1093 Kendall    85M   77M sleep   59    0   0:07:15 1.1% Xsun/1
1802 Kendall    60M   15M sleep   59    0   0:00:08 0.1% gnome-terminal/2
1301 Kendall    93M   23M sleep   49    0   0:00:30 0.1% java/14
1259 Kendall    53M   15M sleep   49    0   0:00:32 0.1% gaim/1
2133 Kendall 3312K 2740K cpu1    59    0   0:00:00 0.0% prstat/1
1276 Kendall    51M   12M sleep   59    0   0:00:11 0.0% gnome-netstatus/1
1247 Kendall    46M   10M sleep   59    0   0:00:06 0.0% metacity/1
1274 Kendall    51M   13M sleep   59    0   0:00:05 0.0% wnck-applet/1
1249 Kendall    56M   17M sleep   59    0   0:00:07 0.0% gnome-panel/1
1278 Kendall    48M 9240K sleep   59    0   0:00:05 0.0% mixer_applet2/1
1245 Kendall 9092K 3844K sleep   59    0   0:00:00 0.0% gnome-smproxy/1
1227 Kendall 8244K 4444K sleep   59    0   0:00:01 0.0% xscreensaver/1
1201 Kendall 4252K 1664K sleep   59    0   0:00:00 0.0% sdt_shell/1
1217 Kendall    55M   16M sleep   59    0   0:00:00 0.0% gnome-session/1
   779 Kendall    47M 2208K sleep   59    0   0:00:00 0.0% gnome-volcheck/1
   746 Kendall 5660K 3660K sleep   59    0   0:00:00 0.0% bonobo-activati/1
1270 Kendall    49M   10M sleep   49    0   0:00:00 0.0% clock-applet/1
1280 Kendall    47M 8904K sleep   59    0   0:00:00 0.0% notification-ar/1
1199 Kendall 2928K 884K sleep   59    0   0:00:00 0.0% dsdm/1
1262 Kendall    47M 2268K sleep   59    0   0:00:00 0.0% gnome-volcheck/1
Total: 37 processes, 62 lwps, load averages: 0.11, 0.98, 1.63System uptime is 9 hours, 48 minutes. I'm just wondering why the memory usage seems so high to do...nothing. It's obviously a real problem as the machine turned very slow when vmstat was showing 195MB free.
Any tips, tricks, advice, on which way to go with this?
Thanks!

Apologies for the delayed reply. School has been keeping me nice and busy.
Anyway, here is the output of prstat -Z:
   PID USERNAME SIZE   RSS STATE PRI NICE      TIME CPU PROCESS/NLWP
2040 Kendall      144M   76M sleep   59    0   0:04:26 2.0% firefox-bin/10
28809 Kendall     201M 193M sleep   59    0   0:42:30 1.9% Xsun/1
2083 Kendall      186M   89M sleep   49    0   0:02:31 1.2% java/58
2260 Kendall       59M   14M sleep   59    0   0:00:00 1.0% gnome-terminal/2
2050 Kendall       63M   21M sleep   49    0   0:01:35 0.6% realplay.bin/4
2265 Kendall     3344K 2780K cpu1    59    0   0:00:00 0.2% prstat/1
29513 Kendall     71M   33M sleep   39    0   0:07:25 0.2% gaim/1
28967 Kendall     56M   18M sleep   59    0   0:00:24 0.1% gnome-panel/1
29060 Kendall     93M   24M sleep   49    0   0:02:58 0.1% java/14
28994 Kendall     51M   13M sleep   59    0   0:00:23 0.1% wnck-applet/1
28965 Kendall     49M   14M sleep   59    0   0:00:33 0.0% metacity/1
   649 noaccess   164M   46M sleep   59    0   0:09:54 0.0% java/23
28996 Kendall     51M   12M sleep   59    0   0:00:50 0.0% gnome-netstatus/1
2264 Kendall    1352K 972K sleep   59    0   0:00:00 0.0% csh/1
28963 Kendall 9100K 3792K sleep   59    0   0:00:03 0.0% gnome-smproxy/1
ZONEID    NPROC SWAP   RSS MEMORY      TIME CPU ZONE
     0           80          655M 738M    73%       1:18:40 7.7% global
Total: 80 processes, 322 lwps, load averages: 0.27, 0.27, 0.22Sorry about the bad formatting, it's copied from the terminal.
In any event, we can see that FireFox is sucking up 145MB (??!?!!? crazy...) XSun, 200MB, and java 190MB. I'm running Java Desktop System (Release 3) so I assume that is what accounts for the the high memory usage RE: java process. But, XSun, 200MB?
Is this normal and I just need to toss another gig in, or what?
Thanks

Norton reports high memory usage with firefox and it crashes often

Norton antivirus 2011 has pop up warnings reporting high memory usage from Firefox. I have been getting theem often and my computer is crashing often after those pop up warnings. Thanks

Safe mode did not help.
I have disabled ALL extensions and plug-ins, but the problem with "zig-zag" memory usage still remains (I've not tried to leave browser open for the night yet).
I think I'll do clean reinstall with completely new empty profile (without sync'ed information) to try this out. If this works, I'll start adding stuff (configuration, sync, features, etc) to see what causes the problem.

Extremely high memory usage after upgrading to Firefox 12

After I upgraded to Firefox 12, I began frequently experiencing Firefox memory usage ballooning extremely high (2-3GB after a few minutes of light browsing). Sometimes it will drop back down to a more reasonable level (a few hundred MB), sometimes it hangs (presumably while trying to garbage collect everything), and sometimes it crashes. Usually the crashing thread cannot be determined, but when it can be, it is in the garbage collection code ( [https://crash-stats.mozilla.com/report/list?signature=js%3A%3Agc%3A%3AMarkChildren%28JSTracer*%2C+js%3A%3Atypes%3A%3ATypeObject*%29] ).
I was able to capture an about:memory report when Firefox had gotten to about 1.5 GB and have attached an image.
A couple of things I've tried. I have lots of tabs open (though the Don't load tabs until selected option is enabled), so I copied my profile, kept all my extensions enabled, but closed all my tabs. I then left a page open to http://news.google.com/ and it ran fine for several days, whereas my original profile crashes multiple times a day.
I also tried disabling most of my extensions, leaving the following extensions that I refuse to browse without:
Adblock Plus
BetterPrivacy
NoScript
PasswordMaker
Perspectives
Priv3
However, the problem still happened in that case.
Don't know if any of this helps or not. I'm looking forward to trying Firefox 13 when it comes out.

hello, thanks for reporting back with detailed information.
from a brief look at your extensions i don't recognize any known (to me at least) memory leaking ones. in the last weeks there were also reports about the java plugin causing high memory consumption in combination with firefox 12 - in case you have it installed in firefox > addons > plugins try disabling it for a few days & test how firefox is behaving with many tabs.
& although probably not related to the memory problems you could update your graphics driver to get better results with hardware acceleration in firefox - this is the latest driver by intel for your model & os:
[http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21135&lang=eng&OSVersion=Windows%207%20%2864-bit%29*&DownloadType=Drivers]

SA520W - High memory usage, possible fix in 2.2.0 firmware?

As suggested by Thomas Watts, I'm starting a new thread to discuss the new SA520W firmware (2.2.0) and a possible resolution to high memory usage I'm experiencing on my network.
My current setup is: 16Mbit DSL > SA520W > SA300-10, all with stock settings (no fancy VLAN's etc.)
I have 4 CentOS 5/6 servers and a Windows 7 Ultimate station connected to the switch. I use CIFS to connect from Windows station to the other Linux servers and send large files. I currently notice the following behavior:
When the file transfer starts, the Intel 1Gbit NIC is nearly saturated, hitting 115MB/sec. After few seconds, the data transfer comes to a halt and the transfer speed drops to around 50MB/sec. If I check the memory usage before the file transfer, it is approximately to 50-60% (on a fresh router reboot). Every time I send large files to other machines, the router memory consumption increases and it does not lower after a reasonable delay. I end-up with high memory near 90% and the only solution I have is to reboot the router in order to bring it back to 50%.
Now, Thomas told me that this is simply a cosmetic issue, the memory is not actually 90% used. Yet, when the memory hits this threshold, I'm not capable to send files are normal LAN speeds I'm used to. Rebooting the router allows me to send only ONCE (and for few seconds) data at the expected LAN speeds.
I would apreciate any input from Cisco engineers as well other users who experience the same issue. I would also like to know if any related work was done into 2.2.0 firmware and when we expect to have it released to users.
Regards,
Floren Munteanu

Hi Tom,
See below the answers.
Are you currently running the 2.1.71 code?
Yes
Are you using IPS?
No, the LAN is for internal use (no external users allowed)
Are you using Protectlink services?
No
Hardware wise, I did not changed anything on machines. All boxes have dual Intel EXPI9301CT NIC's (LACP was planned) but I currently use single connections for sanity reasons (disks won't allow greater speeds anyway). Previous to Cisco, I used a Netgear ProSafe router + switch which did not encountered the issues I mention. Honestly, at first I thought I'm dealing with some stupid disk issues on Windows. So I ran a quick test and the stats are proper:
> winsat disk -drive c
> Disk Sequential 64.0 Read                   109.62 MB/s        6.5
> Disk Random 16.0 Read                       2.47 MB/s          4.4
> Responsiveness: Average IO Rate              2.12 ms/IO         6.9
> Responsiveness: Grouped IOs                  8.34 units         7.4
> Responsiveness: Long IOs                     5.59 units         7.7
> Responsiveness: Overall                      46.63 units        7.1
> Responsiveness: PenaltyFactor                0.0
> Disk Sequential 64.0 Write                  117.03 MB/s        6.7
> Average Read Time with Sequential Writes     6.977 ms           5.3
> Latency: 95th Percentile                     32.720 ms          3.0
> Latency: Maximum                             118.231 ms         7.6
> Average Read Time with Random Writes         13.346 ms          3.7
> Total Run Time 00:01:39.50
As I mentioned before, everything is pretty much stock on router/switch settings. If you have any tips that allow me to identify the cause, I would appreciate the input. What puzzles me is the speed drop and quick memory usage increase. It occurs 7-10 seconds after the transfers begins. It looks like the data transfer hangs for a very short period of time (less than half of second) and the transfer speed decreases from 110-115MB/sec to 50-60MB/sec. The transfer is completed at this speed. No matter how many other files I try to transfer after, the speed won't go higher than 60MB/sec. If I reboot the router, I get the same cycle.

Computer slows or freezes and displays high memory usage message firefox + thunderbird

When surfing between websites, the computer screen slows or freezes. I hit the return key and the new page can take 2-3 minutes to come up. The screen shows a message that there is high memory use on firefox, and also thunderbird when loading new incoming emails. The internet files are on C so here is a defrag report from 6.7.2011. I hope this helps your diagnosis.
Volume (C:)
Volume size = 29.29 GB
Cluster size = 4 KB
Used space = 7.73 GB
Free space = 21.57 GB
Percent free space = 73 %
Volume fragmentation
Total fragmentation = 13 %
File fragmentation = 27 %
Free space fragmentation = 0 %
File fragmentation
Total files = 31,551
Average file size = 364 KB
Total fragmented files = 4
Total excess fragments = 21,222
Average fragments per file = 1.67
Pagefile fragmentation
Pagefile size = 395 MB
Total fragments = 2
Folder fragmentation
Total folders = 3,093
Fragmented folders = 1
Excess folder fragments = 0
Master File Table (MFT) fragmentation
Total MFT size = 48 MB
MFT record count = 35,026
Percent MFT in use = 71 %
Total MFT fragments = 3
Fragments File Size Files that cannot be defragmented
7,684 804 MB \Documents and Settings\cameron\Application Data\Thunderbird\Profiles\duo7ne8y.default\Mail\mailbox.aon.at\Inbox
13,535 958 MB \Documents and Settings\cameron\Application Data\Thunderbird\Profiles\duo7ne8y.default\Mail\mailbox.aon.at\Trash

@ kmrupam: 3.40Ghz
@ cor-el disabling hardware acceleration didn't help unfortunately.
Thanks
Simon

Firefox becomes really slow then eventually unresponsive when loading a page with many hires images. Unsual high memory usage up to 2gigs just for firefox. Was never a problem with v3.6.

When loading a page with many hires images, Firefox becomes really slow and scrolling becomes jumpy then eventually becomes completely unresponsive. Unusual high memory usage of up to 2gigs just for firefox when loading these pages. This was never a problem with v3.6.

I encountered the same type of problem. Firefox running terribly slowly and slowing down my entire machine (Core i5 with 256GB SSD). Searching the forums, I found a couple of things about troubleshooting performance issues, one of which was to use '''hardware acceleration''', that is on by default. It was turned on on my PC, '''so I tried deactivating it, and it worked!'''
So doing the exact opposite as Mozilla support said solved the problem. It is really a pain now to work with Firefox. I'm using it because I have no choice, but I'd recommend IE and Chrome over Firefox... Whatever, the market will decide once Firefox has become to crappy...

High memory use when checking downloads folder through browser

High memory use when checking downloads folder through browser.
I have a total of 3 DDR2 Gbytes of ram. Pentium(R) Dual-Core CPU T4500 @ 2.30GHz Win 7 home pr. 64bit. Firefox 27.0 beta
I right click on a file to "open containing folder" from the drop down menu in downloads.
When the folder has been opened, explorer is trying to index the folder (which it never does completely or well after 5 minutes I close the folder and shut down the dllhost process cause laptop is blazing hot) and memory keeps increasing till no more is available.
I checked task manager and see that dllhost is the particular process that is causing the spike in memory usage even after closing the folder I right click and stop the process and memory is restored after awhile.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

High disk usage/high memory usage.

i keep getting high memory usage and high disk usage in ps cs6.
its slow when i open a file. how can i solve this problem.
thank you.
philip.

Not to put too fine a point on it, but more than what? More RAM is almost always better, but you haven't answered most of the questions posed here. The answer might be different if you have 2 GB of RAM or 32 GB of RAM already. A 9 megapixel document could get rather large with a lot of layers, but again you've neglected to give any hard info about its size.
Regarding your video card, that's a bit of a judgment call you need to make. For Photoshop CS6 I currently advise people to try to get a video card that gets a score of 1000 or better on this benchmark: http://www.videocardbenchmark.net/high_end_gpus.html
Video card speed will matter when you're editing those 3D components and video card VRAM will also matter, but possibly even more importantly your GeForce 320 is a bit old, and nVidia may just not be doing their best driver work for it any more.
Everything in general will run more smoothly with a powerful modern video card. I like to recommend a VisionTek ATI Radeon HD 7750 - or if the computer power supply and your budget allow, the even more powerful 7850. VisionTek does a very good job with their hardware, IMO, and it comes with a lifetime guarantee.
Keep in mind that if you switch from nVidia to ATI or vice versa, you should carefully sweep your system to ensure all files from the old card are removed, then visit the web site of the new card's maker and download/install their latest display driver release.
Best of luck.
-Noel

High memory usage OSX Lion on iMac

Hi,
Recently upgraded 2006 iMac 6.1 to OSX 10.7.2 (4GB). Noticed performance dropped significantly when 2 or more users are logged in especially when switching users. Observed memory usage for OSX Lion is far higher than Snow Leopard! By startup 2GB real memory already allocated and often down to last 500MB. Performance appear to slow down due to swapping as swap i/o appears to increase.
On snow leopard I had 6 users logged in and 4GB was plenty. Lion appears to be a MS product!!!!
Anyone else experienced high memory usage on Lion and any ideas how to reduce memory consumption?
Unfortunately at the maximum memory capacity for my my iMac so need to find ways to reduce memory usage. There must be a kernel compiler option that could reduce memory.....
Also considering SSD drive to speed up swap i/o read/writes.
Otherwise will have to go back to leopard :-(
Thanks for any help in advance.
-Dav
PS> OSX Lion is alot more stable than previous OSX releases with this iMac model. Especially iMacs suffering the notorious NVDIDIA GPU heat problems...

You mac can handle up to 3gb of ram, but slightly more will be available with 4gb installed. For Lion to run smooth, a true 4gb of ram is preferred, which may explain the sluggishness of your mac.

High memory usage on JDBC 10.2.0.1.0 driver on Prepared/Callable Statements

We are observing high memory usage for each callable/prepared stmt, using 10.2.0.1.0 JDBC Driver. The char[] in oracle/jdbc/driver/T4CVarcharAccessor was alloted 64K to 320K and grows with usage. This problem is worse with 10.1.0.2. driver which was alloted 720K byte of memory for each stmt right at the start.
We found this by doing a JVM heap dump and analyzing the heap dump using IBM's heap analyser. Here is a snapshot of the heap dump for this object:
321,240 [216] 11 oracle/jdbc/driver/T4CVarcharAccessor 0x72752968
- 320,616 [320,616] 0 char[] 0x72761028
- 216 [216] 0 short[] 0x727527d8
- 72 [32] 1 java/lang/String 0x727530a0
- 24 [24] 0 int[] 0x72752938
- 24 [24] 0 int[] 0x72752948
- 24 [24] 0 int[] 0x72752958
- 16 [16] 0 bool[] 0x72752928
- 16 [16] 0 byte[] 0x727528b0
- 16 [16] 0 bool[] 0x72752918
- 10,336 [88] 15 oracle/jdbc/driver/T4CMAREngine 0x712e7128
- 1,544 [1,032] 79 oracle/jdbc/driver/T4CPreparedStatement 0x72754c58
It is repeated many times for each prepared/callable stmt call.
Details of our platform is:
Database - Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
JDBC Driver - Oracle Database 10g Release 2 (10.2.0.1.0) JDBC Drivers
JDK - [Classic VM, Version 1.4.2] from [IBM Corporation]
Our callable stmts are not using any of the Oracle caching facility. It is a simple call stmt with OUT parameters and the stmt is closed after each execution. However, we implement our own connection pooling and do not close the connection after each stmt.
Is there a workaround to this? Would appreciate any feedback.

What is happening is that each new CallableStatement you create allocates a new char[]. I would strongly encourage you to use the implicit statement cache if at all possible. That way instead of creating a new statement each time with a new char[] you will get an already existing statement and reuse the existing char[]. Closing a statement releases the char[] so if you really are closing the statements the char[]s should be GC'd.
Douglas

Sudden high memory usage, can't find cause

I did a big update yesterday, and today I've started to notice very high memory usage. I wasn't keeping track before so I can't say how much it increased, but I've never had problems before, and the slowness and lack of responsiveness have been noticeable, though I haven't ruled out other possible causes for that. Here's the output of 'free -m':
total used free shared buffers cached
Mem: 7971 7826 144 0 1 149
-/+ buffers/cache: 7674 296
Swap: 9215 458 8757
It wasn't as bad as that right after startup, though usage still seemed suspiciously high. What makes this whole thing a mystery to me is that none of my running processes seem to be using that much memory! Here's the output of 'top -b -n 1':
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 20 0 32712 544 384 S 0.0 0.0 0:01.32 systemd
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:02.48 ksoftirqd/0
5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0H
7 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
8 root 20 0 0 0 0 S 0.0 0.0 0:15.55 rcu_preempt
9 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_sched
11 root rt 0 0 0 0 S 0.0 0.0 0:00.05 watchdog/0
12 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/1
13 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/1
14 root 20 0 0 0 0 S 0.0 0.0 0:01.02 ksoftirqd/1
16 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:0H
17 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/2
18 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/2
19 root 20 0 0 0 0 S 0.0 0.0 0:01.17 ksoftirqd/2
20 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/2:0
21 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/2:0H
22 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/3
23 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/3
24 root 20 0 0 0 0 S 0.0 0.0 0:01.04 ksoftirqd/3
26 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/3:0H
27 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper
28 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs
29 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 netns
30 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 writeback
31 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 bioset
32 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kblockd
33 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 xenbus_frontend
35 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khungtaskd
36 root 20 0 0 0 0 S 0.0 0.0 0:06.75 kswapd0
37 root 25 5 0 0 0 S 0.0 0.0 0:00.00 ksmd
38 root 39 19 0 0 0 S 0.0 0.0 0:00.24 khugepaged
39 root 20 0 0 0 0 S 0.0 0.0 0:00.00 fsnotify_mark
40 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 crypto
44 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kthrotld
47 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 deferwq
49 root 20 0 0 0 0 S 0.0 0.0 0:00.21 kworker/1:1
61 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ata_sff
63 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0
65 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_1
68 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_2
69 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_3
70 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_4
71 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_5
76 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khubd
81 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kworker/3:2
93 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 firewire
94 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_6
95 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_7
96 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_8
97 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_9
100 root 0 -20 0 0 0 S 0.0 0.0 0:01.31 kworker/0:1H
104 root 20 0 0 0 0 S 0.0 0.0 0:00.03 jbd2/sda3-8
105 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit
119 root 20 0 182720 324 228 S 0.0 0.0 0:02.90 systemd-journal
130 root 20 0 32032 320 316 S 0.0 0.0 0:00.16 systemd-udevd
133 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/1:2
150 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 rpciod
152 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 nfsiod
160 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:1H
162 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/3:1H
189 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cfg80211
191 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 led_workqueue
216 root -51 0 0 0 0 S 0.0 0.0 0:00.00 irq/53-mei_me
220 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/2:1H
255 root 20 0 0 0 0 S 0.0 0.0 0:00.59 jbd2/sda2-8
256 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit
267 root 20 0 13236 340 260 S 0.0 0.0 0:00.02 crond
268 root 20 0 57644 524 232 S 0.0 0.0 0:00.07 syslog-ng
275 root 20 0 77896 2164 52 S 0.0 0.0 0:00.11 cupsd
276 root 20 0 32856 32 0 S 0.0 0.0 0:00.53 atieventsd
278 root 20 0 26120 452 448 S 0.0 0.0 0:00.00 systemd-logind
280 dbus 20 0 18040 1040 484 S 0.0 0.0 0:00.16 dbus-daemon
293 root 20 0 8156 32 28 S 0.0 0.0 0:00.04 agetty
294 root 20 0 22416 304 304 S 0.0 0.0 0:00.00 kdm
311 root 20 0 32332 52 0 S 0.0 0.0 0:00.10 wpa_supplicant
314 root 20 0 4252 44 28 S 0.0 0.0 0:02.61 acpid
363 root 20 0 233544 396 396 S 0.0 0.0 0:00.12 colord
370 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
371 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
372 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
379 root 20 0 8612 60 16 S 0.0 0.0 0:00.00 dhcpcd
462 redac 20 0 15212 68 0 S 0.0 0.0 0:00.37 gpg-agent
465 redac 20 0 12680 4 0 S 0.0 0.0 0:00.00 ssh-agent
504 root 20 0 229584 440 284 S 0.0 0.0 0:00.03 upowerd
507 polkitd 20 0 506832 916 700 S 0.0 0.0 0:00.09 polkitd
563 root 20 0 355656 1804 1044 S 0.0 0.0 0:01.50 udisksd
628 redac 20 0 2397180 17068 2004 S 0.0 0.2 0:04.86 mysqld
796 rtkit 21 1 168664 372 360 S 0.0 0.0 0:00.34 rtkit-daemon
873 pdnsd 20 0 172532 0 0 S 0.0 0.0 0:00.00 pdnsd
874 tor 20 0 49952 20556 2152 S 0.0 0.3 0:05.89 tor
1884 root 20 0 361452 118644 105076 S 0.0 1.5 1:21.43 X
1895 root 20 0 75048 660 656 S 0.0 0.0 0:00.00 kdm
1903 redac 20 0 13736 412 408 S 0.0 0.0 0:00.01 startkde
1912 redac 20 0 18016 324 320 S 0.0 0.0 0:00.00 dbus-launch
1913 redac 20 0 19220 1604 564 S 0.0 0.0 0:00.50 dbus-daemon
1959 redac 20 0 12680 52 48 S 0.0 0.0 0:00.00 ssh-agent
1976 root 20 0 4080 40 0 S 0.0 0.0 0:00.00 start_kdeinit
1977 redac 20 0 343772 1976 1420 S 0.0 0.0 0:00.07 kdeinit4
1978 redac 20 0 348392 2680 1824 S 0.0 0.0 0:00.04 klauncher
1980 redac 20 0 1262136 5352 3596 S 0.0 0.1 0:00.48 kded4
1991 redac 20 0 430604 4032 2840 S 0.0 0.0 0:00.11 kglobalaccel
1995 redac 20 0 694524 3020 2520 S 0.0 0.0 0:00.10 kactivitymanage
2000 redac 20 0 4216 44 44 S 0.0 0.0 0:00.00 kwrapper4
2001 redac 20 0 516344 3224 2300 S 0.0 0.0 0:00.10 ksmserver
2009 redac 20 0 422056 19640 15244 S 0.0 0.2 0:23.69 compiz
2012 redac 20 0 388168 7692 4544 S 0.0 0.1 0:01.26 emerald
2023 redac 20 0 280300 2500 2160 S 0.0 0.0 0:00.06 kuiserver
2025 redac 20 0 154132 1848 1344 S 0.0 0.0 0:00.24 akonadi_control
2027 redac 20 0 1949412 1984 1592 S 0.0 0.0 0:00.33 akonadiserver
2059 redac 20 0 346680 1408 1020 S 0.0 0.0 0:00.04 kio_http_cache_
2062 redac 20 0 769220 4932 3436 S 0.0 0.1 0:01.00 krunner
2071 redac 20 0 603092 4484 3132 S 0.0 0.1 0:00.16 kmix
2073 redac 20 0 285208 2680 2352 S 0.0 0.0 0:00.04 nepomukcontroll
2074 redac 20 0 359260 3148 2864 S 0.0 0.0 0:00.25 gtk-kde4
2077 redac 20 0 309608 2468 2220 S 0.0 0.0 0:00.05 akonadi_agent_l
2078 redac 20 0 309512 2332 2140 S 0.0 0.0 0:00.04 akonadi_agent_l
2079 redac 20 0 309496 2564 2336 S 0.0 0.0 0:00.05 akonadi_agent_l
2080 redac 20 0 309608 2476 2224 S 0.0 0.0 0:00.05 akonadi_agent_l
2081 redac 20 0 549804 3236 2480 S 0.0 0.0 0:00.13 akonadi_archive
2082 redac 20 0 303140 2480 2276 S 0.0 0.0 0:00.04 akonadi_agent_l
2083 redac 20 0 305600 2516 2300 S 0.0 0.0 0:00.05 akonadi_agent_l
2084 redac 20 0 314988 4144 3156 S 0.0 0.1 0:00.12 akonadi_imap_re
2099 redac 20 0 430912 15668 9912 S 0.0 0.2 0:09.39 yakuake
2100 redac 20 0 309676 2560 2308 S 0.0 0.0 0:00.04 akonadi_agent_l
2101 redac 20 0 339400 2860 2468 S 0.0 0.0 0:00.09 akonadi_maildis
2102 redac 20 0 549820 2828 2504 S 0.0 0.0 0:00.13 akonadi_mailfil
2103 redac 20 0 314052 2924 2508 S 0.0 0.0 0:00.09 akonadi_nepomuk
2115 redac 20 0 303056 2428 2240 S 0.0 0.0 0:00.04 akonadi_agent_l
2132 redac 20 0 2011628 14200 5716 S 0.0 0.2 0:18.21 ktorrent
2158 redac 20 0 15972 836 520 S 0.0 0.0 0:00.00 bash
2161 redac 20 0 1040928 6484 3060 S 0.0 0.1 0:00.53 knotify4
2162 redac 20 0 1962616 484928 23072 S 0.0 5.9 2:06.25 firefox
2176 redac 20 0 13732 344 340 S 0.0 0.0 0:00.00 rssowl
2178 redac 20 0 11344 404 404 S 0.0 0.0 0:00.00 RSSOwl
2193 redac 20 0 374420 2764 2516 S 0.0 0.0 0:00.06 polkit-kde-auth
2195 redac 20 0 3314212 140484 13196 S 0.0 1.7 0:24.29 java
2203 redac 9 -11 308256 2424 912 S 0.0 0.0 0:00.36 pulseaudio
2209 redac 20 0 406420 3544 2720 S 0.0 0.0 0:00.08 korgac
2233 redac 20 0 69156 420 420 S 0.0 0.0 0:00.00 gconf-helper
2235 redac 20 0 45676 836 564 S 0.0 0.0 0:00.01 gconfd-2
2236 redac 20 0 438044 4468 3128 S 0.0 0.1 0:00.13 klipper
2322 redac 20 0 193052 944 740 S 0.0 0.0 0:00.00 gvfsd
2336 redac 20 0 282112 644 644 S 0.0 0.0 0:00.00 gvfsd-fuse
2361 redac 20 0 263576 572 572 S 0.0 0.0 0:00.00 at-spi-bus-laun
2436 redac 20 0 3188512 61188 19352 S 0.0 0.7 0:16.98 plasma-desktop
2441 redac 20 0 9828 784 520 S 0.0 0.0 0:01.06 ksysguardd
2832 redac 20 0 15580 1240 784 S 0.0 0.0 0:02.93 top
2867 redac 20 0 15972 1796 1160 S 0.0 0.0 0:00.03 bash
2937 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kworker/2:1
2938 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/3:1
3336 root 20 0 0 0 0 S 0.0 0.0 0:00.25 kworker/u8:2
3643 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/u8:1
3662 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kworker/0:1
3703 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0
3704 redac 20 0 15456 1308 992 R 0.0 0.0 0:00.00 top
32506 root 20 0 0 0 0 S 0.0 0.0 0:00.57 kworker/0:2
I wouldn't expect the '%MEM's to add up to exactly the real usage, but this isn't even close! So, what could be using up all of my memory? I have /tmp mounted to ram, but that's only a few megabytes. I really have no idea where to go from here.
The relevant portion of my pacman log is below, since I don't know how to get just a compact list of the updated packages. Most notably, the kernel was upgrades, from 3.9.9-1 to 3.10.3-1.
[2013-08-03 13:00] [PACMAN] Running 'pacman -Su'
[2013-08-03 13:00] [PACMAN] starting full system upgrade
[2013-08-03 13:38] [PACMAN] upgraded a52dec (0.7.4-6 -> 0.7.4-7)
[2013-08-03 13:38] [PACMAN] upgraded libmariadbclient (5.5.31-1 -> 5.5.32-1)
[2013-08-03 13:38] [PACMAN] upgraded mariadb-clients (5.5.31-1 -> 5.5.32-1)
[2013-08-03 13:38] [PACMAN] upgraded mariadb (5.5.31-1 -> 5.5.32-1)
[2013-08-03 13:38] [PACMAN] upgraded akonadi (1.10.0-2 -> 1.10.2-1)
[2013-08-03 13:38] [PACMAN] upgraded alsa-plugins (1.0.27-1 -> 1.0.27-2)
[2013-08-03 13:38] [PACMAN] upgraded alsa-utils (1.0.27.1-2 -> 1.0.27.2-1)
[2013-08-03 13:38] [PACMAN] upgraded x264 (20130206-1 -> 20130702-2)
[2013-08-03 13:38] [PACMAN] upgraded ffmpeg (1:1.2.1-1 -> 1:2.0-2)
[2013-08-03 13:38] [PACMAN] upgraded amarok (2.7.1-2 -> 2.7.1-3)
[2013-08-03 13:38] [PACMAN] upgraded anki (2.0.11-1 -> 2.0.12-1)
[2013-08-03 13:38] [PACMAN] upgraded apr (1.4.6-1 -> 1.4.8-1)
[2013-08-03 13:38] [PACMAN] upgraded glib2 (2.36.3-2 -> 2.36.3-3)
[2013-08-03 13:38] [ALPM] warning: /usr/lib/avahi/service-types.db installed as /usr/lib/avahi/service-types.db.pacnew
[2013-08-03 13:38] [PACMAN] upgraded avahi (0.6.31-9 -> 0.6.31-10)
[2013-08-03 13:38] [PACMAN] upgraded bison (2.7.1-1 -> 3.0-1)
[2013-08-03 13:38] [ALPM-SCRIPTLET] ---------------- I/O BUG ---------------------------------------
[2013-08-03 13:38] [ALPM-SCRIPTLET] There's a bug in fglrx found by lano1106 which generates
[2013-08-03 13:38] [ALPM-SCRIPTLET] great amount of unneeded I/O operations
[2013-08-03 13:38] [ALPM-SCRIPTLET]
[2013-08-03 13:38] [ALPM-SCRIPTLET] To activate workaround enable systemd service:
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl enable temp-links-catalyst
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl start temp-links-catalyst
[2013-08-03 13:38] [ALPM-SCRIPTLET]
[2013-08-03 13:38] [ALPM-SCRIPTLET] More infos:
[2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1279977#p1279977
[2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1280193#p1280193
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [PACMAN] upgraded catalyst-utils (13.6-3 -> 13.8-1)
[2013-08-03 13:38] [ALPM-SCRIPTLET] + removing fglrx module from /usr/lib/modules/3.9.9-1-ARCH
[2013-08-03 13:38] [ALPM-SCRIPTLET] Building fglrx module for 3.9.9-1-ARCH kernel ...
[2013-08-03 13:38] [ALPM-SCRIPTLET] Ok.
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [ALPM-SCRIPTLET] ATTENTION!
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [ALPM-SCRIPTLET] To enable 'automatic re-compilation while system shutdown/reboot'
[2013-08-03 13:38] [ALPM-SCRIPTLET] testing feature run these commands as root:
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl enable catalyst-hook
[2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl start catalyst-hook
[2013-08-03 13:38] [ALPM-SCRIPTLET]
[2013-08-03 13:38] [ALPM-SCRIPTLET] More info here:
[2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1255575#p1255575
[2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:38] [PACMAN] upgraded catalyst-hook (13.6-3 -> 13.8-1)
[2013-08-03 13:38] [PACMAN] upgraded chromaprint (0.7-5 -> 0.7-6)
[2013-08-03 13:38] [PACMAN] upgraded nspr (4.9.6-1 -> 4.10-2)
[2013-08-03 13:38] [PACMAN] upgraded nss (3.14.3-3 -> 3.15.1-1)
[2013-08-03 13:38] [PACMAN] upgraded xdg-utils (1.1.0.git20121008-2 -> 1.1.0.git20130520-1)
[2013-08-03 13:38] [PACMAN] upgraded libgcrypt (1.5.2-1 -> 1.5.3-1)
[2013-08-03 13:38] [PACMAN] upgraded libpng (1.6.2-3 -> 1.6.3-1)
[2013-08-03 13:38] [PACMAN] upgraded xcb-proto (1.8-1 -> 1.8-2)
[2013-08-03 13:38] [PACMAN] upgraded libxcb (1.9.1-1 -> 1.9.1-2)
[2013-08-03 13:38] [PACMAN] upgraded libx11 (1.6.0-1 -> 1.6.1-1)
[2013-08-03 13:38] [PACMAN] upgraded giflib (4.2.1-3 -> 5.0.4-2)
[2013-08-03 13:38] [PACMAN] upgraded libwebp (0.3.1-2 -> 0.3.1-3)
[2013-08-03 13:38] [PACMAN] upgraded harfbuzz (0.9.18-1 -> 0.9.19-1)
[2013-08-03 13:38] [PACMAN] upgraded harfbuzz-icu (0.9.18-1 -> 0.9.19-1)
[2013-08-03 13:38] [PACMAN] upgraded chromium (28.0.1500.71-1 -> 28.0.1500.95-1)
[2013-08-03 13:38] [PACMAN] upgraded glew (1.9.0-2 -> 1.10.0-1)
[2013-08-03 13:38] [PACMAN] upgraded projectm (2.1.0-5 -> 2.1.0-6)
[2013-08-03 13:39] [PACMAN] upgraded clementine (1.1.1-8 -> 1.1.1-9)
[2013-08-03 13:39] [PACMAN] upgraded cln (1.3.2-1 -> 1.3.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gstreamer (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:39] [PACMAN] upgraded gst-plugins-base-libs (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:39] [PACMAN] upgraded gst-plugins-bad (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:39] [PACMAN] upgraded clutter-gst (2.0.4-2 -> 2.0.6-1)
[2013-08-03 13:39] [PACMAN] upgraded colord (1.0.2-1 -> 1.0.2-2)
[2013-08-03 13:39] [PACMAN] upgraded cracklib (2.8.22-3 -> 2.9.0-1)
[2013-08-03 13:39] [PACMAN] upgraded dhcpcd (5.6.8-3 -> 6.0.4-1)
[2013-08-03 13:39] [PACMAN] upgraded dosfstools (3.0.20-1 -> 3.0.22-1)
[2013-08-03 13:39] [PACMAN] upgraded lib32-glew (1.9.0-1 -> 1.10.0-1)
[2013-08-03 13:39] [ALPM] warning: directory permissions differ on /opt/df_linux/
[2013-08-03 13:39] [PACMAN] upgraded dwarffortress (0.34.11-3 -> 0.34.11-4)
[2013-08-03 13:39] [PACMAN] upgraded jre7-openjdk-headless (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-03 13:39] [PACMAN] upgraded jre7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-03 13:39] [PACMAN] upgraded jdk7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
[2013-08-03 13:39] [PACMAN] upgraded eclipse (4.2.2-1 -> 4.3-1)
[2013-08-03 13:39] [PACMAN] upgraded emacs (24.3-2 -> 24.3-3)
[2013-08-03 13:39] [PACMAN] upgraded exempi (2.2.0-1 -> 2.2.1-1)
[2013-08-03 13:39] [PACMAN] upgraded fontforge (20120731_b-3 -> 20120731_b-6)
[2013-08-03 13:39] [PACMAN] upgraded fuse (2.9.2-3 -> 2.9.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gegl (0.2.0-8 -> 0.2.0-9)
[2013-08-03 13:39] [PACMAN] upgraded git (1.8.3.3-1 -> 1.8.3.4-1)
[2013-08-03 13:39] [PACMAN] upgraded glib (1.2.10-9 -> 1.2.10-10)
[2013-08-03 13:39] [PACMAN] upgraded glib-perl (1.280-3 -> 1.301-1)
[2013-08-03 13:39] [PACMAN] upgraded glpk (4.48-1 -> 4.52-1)
[2013-08-03 13:39] [PACMAN] upgraded gnash-common (0.8.10-9 -> 0.8.10-10)
[2013-08-03 13:39] [PACMAN] upgraded ibus (1.5.2-2 -> 1.5.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-settings-daemon (3.8.3-2 -> 3.8.4-1)
[2013-08-03 13:39] [PACMAN] upgraded libqmi (1.4.0-1 -> 1.4.0-2)
[2013-08-03 13:39] [PACMAN] upgraded libmbim (1.2.0-1 -> 1.4.0-1)
[2013-08-03 13:39] [PACMAN] upgraded modemmanager (0.7.991-1 -> 1.0.0-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-control-center (3.8.3-1 -> 3.8.4.1-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-icon-theme (3.8.2-1 -> 3.8.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gnutls (3.2.1-1 -> 3.2.3-1)
[2013-08-03 13:39] [PACMAN] upgraded gnome-vfs (2.24.4-6 -> 2.24.4-7)
[2013-08-03 13:39] [PACMAN] upgraded goffice (0.10.3-1 -> 0.10.4-1)
[2013-08-03 13:40] [PACMAN] upgraded gnumeric (1.12.3-1 -> 1.12.4-1)
[2013-08-03 13:40] [PACMAN] upgraded gst-plugins-base (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:40] [PACMAN] upgraded gst-plugins-good (1.0.8-1 -> 1.0.9-1)
[2013-08-03 13:40] [PACMAN] upgraded gstreamer0.10-ugly (0.10.19-5 -> 0.10.19-6)
[2013-08-03 13:40] [PACMAN] upgraded gstreamer0.10-ugly-plugins (0.10.19-5 -> 0.10.19-6)
[2013-08-03 13:40] [ALPM] warning: directory permissions differ on /var/log/hp/
[2013-08-03 13:40] [PACMAN] upgraded hplip (3.13.6-1 -> 3.13.7-1)
[2013-08-03 13:40] [PACMAN] upgraded idnkit (1.0-2 -> 1.0-3)
[2013-08-03 13:40] [PACMAN] upgraded ilmbase (2.0.0-1 -> 2.0.1-1)
[2013-08-03 13:40] [PACMAN] upgraded imlib2 (1.4.5-4 -> 1.4.5-5)
[2013-08-03 13:40] [PACMAN] upgraded iso-codes (3.43-1 -> 3.44-1)
[2013-08-03 13:40] [PACMAN] upgraded openexr (2.0.0-1 -> 2.0.1-1)
[2013-08-03 13:40] [PACMAN] upgraded media-player-info (17-1 -> 19-1)
[2013-08-03 13:40] [PACMAN] upgraded qtwebkit (2.3.1-2 -> 2.3.2-1)
[2013-08-03 13:40] [PACMAN] upgraded kdelibs (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdemultimedia-ffmpegthumbs (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-filesharing (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kdnssd (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kget (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kopete (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kppp (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-krdc (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kdenetwork-krfb (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:40] [PACMAN] upgraded kid3 (2.3-1 -> 2.3-2)
[2013-08-03 13:40] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:40] [ALPM-SCRIPTLET] lib32-catalyst-utils works with [multilib] repository
[2013-08-03 13:40] [ALPM-SCRIPTLET] ----------------------------------------------------------------
[2013-08-03 13:40] [PACMAN] upgraded lib32-catalyst-utils (13.6-1 -> 13.8-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libx11 (1.6.0-1 -> 1.6.1-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-giflib (4.2.1-1 -> 5.0.4-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-gnutls (3.2.1-1 -> 3.2.3-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-harfbuzz (0.9.18-1 -> 0.9.19-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libgcrypt (1.5.2-1 -> 1.5.3-1)
[2013-08-03 13:40] [PACMAN] upgraded libpciaccess (0.13.1-1 -> 0.13.2-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libpciaccess (0.13.1-1 -> 0.13.2-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-libpng (1.6.2-1 -> 1.6.3-1)
[2013-08-03 13:40] [PACMAN] upgraded mesa (9.1.4-5 -> 9.1.6-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-mesa (9.1.4-1 -> 9.1.6-1)
[2013-08-03 13:40] [PACMAN] upgraded lib32-nspr (4.9.6-1 -> 4.10-2)
[2013-08-03 13:40] [PACMAN] upgraded lib32-nss (3.14.3-2 -> 3.15.1-1)
[2013-08-03 13:40] [PACMAN] upgraded libdatrie (0.2.5-1 -> 0.2.6-1)
[2013-08-03 13:40] [PACMAN] upgraded libgdiplus (2.10-4 -> 2.10.9-1)
[2013-08-03 13:40] [PACMAN] upgraded libthai (0.1.18-1 -> 0.1.19-1)
[2013-08-03 13:40] [PACMAN] upgraded libusbx (1.0.15-1 -> 1.0.16-1)
[2013-08-03 13:40] [PACMAN] upgraded libxfont (1.4.5-1 -> 1.4.6-1)
[2013-08-03 13:40] [PACMAN] upgraded linux-firmware (20130610-1 -> 20130725-1)
[2013-08-03 13:40] [PACMAN] upgraded mkinitcpio-busybox (1.20.2-1 -> 1.21.1-2)
[2013-08-03 13:40] [PACMAN] upgraded mkinitcpio (0.14.0-1 -> 0.15.0-1)
[2013-08-03 13:40] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-08-03 13:40] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Starting build: 3.10.3-1-ARCH
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [fglrx]
[2013-08-03 13:40] [ALPM-SCRIPTLET] Building fglrx module for 3.10.3-1-ARCH kernel ...
[2013-08-03 13:40] [ALPM-SCRIPTLET] Failed!!! Check out log: /var/log/catalyst-install.log
[2013-08-03 13:40] [ALPM-SCRIPTLET] - /usr/lib/modules/3.9.9-1-ARCH looks like unused, maybe remove it manualy?
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Starting build: 3.10.3-1-ARCH
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [fglrx]
[2013-08-03 13:40] [ALPM-SCRIPTLET] Building fglrx module for 3.10.3-1-ARCH kernel ...
[2013-08-03 13:40] [ALPM-SCRIPTLET] Failed!!! Check out log: /var/log/catalyst-install.log
[2013-08-03 13:40] [ALPM-SCRIPTLET] - /usr/lib/modules/3.9.9-1-ARCH looks like unused, maybe remove it manualy?
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-08-03 13:40] [PACMAN] upgraded linux (3.9.9-1 -> 3.10.3-1)
[2013-08-03 13:40] [PACMAN] upgraded linux-docs (3.9.9-1 -> 3.10.3-1)
[2013-08-03 13:40] [PACMAN] upgraded linux-headers (3.9.9-1 -> 3.10.3-1)
[2013-08-03 13:40] [PACMAN] upgraded lirc-utils (1:0.9.0-49 -> 1:0.9.0-52)
[2013-08-03 13:40] [PACMAN] upgraded mediastreamer (2.9.0-1 -> 2.9.0-3)
[2013-08-03 13:41] [PACMAN] upgraded meld (1.7.3-1 -> 1.7.4-1)
[2013-08-03 13:41] [PACMAN] upgraded mencoder (36285-1 -> 36285-3)
[2013-08-03 13:41] [PACMAN] upgraded mercurial (2.6.3-1 -> 2.7-1)
[2013-08-03 13:41] [PACMAN] upgraded mplayer (36285-1 -> 36285-3)
[2013-08-03 13:41] [PACMAN] upgraded nepomuk-core (4.10.5-1 -> 4.10.5-2)
[2013-08-03 13:41] [PACMAN] upgraded netctl (1.1-1 -> 1.2-1)
[2013-08-03 13:41] [PACMAN] upgraded nfs-utils (1.2.8-8 -> 1.2.8-9)
[2013-08-03 13:41] [PACMAN] upgraded pcsx2 (1.0.0-5 -> 1.0.0-6)
[2013-08-03 13:41] [PACMAN] upgraded rosegarden (13.04-1 -> 13.06-1)
[2013-08-03 13:41] [PACMAN] upgraded soundkonverter (2.0.3-1 -> 2.0.4-1)
[2013-08-03 13:41] [PACMAN] upgraded subversion (1.8.0-1 -> 1.8.1-1)
[2013-08-03 13:41] [PACMAN] upgraded syslinux (4.06-2 -> 4.07-1)
[2013-08-03 13:41] [PACMAN] upgraded telepathy-glib (0.20.2-1 -> 0.20.4-1)
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] recreating all formats...warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
[2013-08-03 13:41] [ALPM-SCRIPTLET] /usr/bin/fmtutil: line 395: /texconfig/tcfmgr: No such file or directory
[2013-08-03 13:41] [ALPM-SCRIPTLET] fmtutil: config file `fmtutil.cnf' not found.
[2013-08-03 13:41] [ALPM-SCRIPTLET] done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-08-03 13:41] [PACMAN] upgraded texlive-bin (2012.0-13 -> 2013.30973-2)
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/tex/generic/config/language.dat installed as /etc/texmf/tex/generic/config/language.dat.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/tex/generic/config/language.def installed as /etc/texmf/tex/generic/config/language.def.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/dvipdfmx/dvipdfmx.cfg installed as /etc/texmf/dvipdfmx/dvipdfmx.cfg.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/chktex/chktexrc installed as /etc/texmf/chktex/chktexrc.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/web2c/fmtutil.cnf installed as /etc/texmf/web2c/fmtutil.cnf.pacnew
[2013-08-03 13:41] [ALPM] warning: /etc/texmf/web2c/texmf.cnf installed as /etc/texmf/web2c/texmf.cnf.pacnew
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.4WfV4vnjxi...
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2013-08-03 13:41] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2013-08-03 13:41] [ALPM-SCRIPTLET] updmap: resetting $HOME value (was /home/redac) to root's actual home (/root).
[2013-08-03 13:41] [ALPM-SCRIPTLET] done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: recreating all formats...
[2013-08-03 13:41] [ALPM-SCRIPTLET] /usr/bin/fmtutil: line 395: /usr/share/texmf/texconfig/tcfmgr: No such file or directory
[2013-08-03 13:41] [ALPM-SCRIPTLET] fmtutil: config file `fmtutil.cnf' not found.
[2013-08-03 13:41] [ALPM-SCRIPTLET] done.
[2013-08-03 13:41] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-08-03 13:41] [ALPM-SCRIPTLET] NB: To setup ConTeXt and the lua(la)tex font db,
[2013-08-03 13:41] [ALPM-SCRIPTLET] see http://wiki.archlinux.org/index.php/TeX_Live
[2013-08-03 13:41] [PACMAN] upgraded texlive-core (2012.29661-1 -> 2013.30962-2)
[2013-08-03 13:41] [PACMAN] upgraded transcode (1.1.7-9 -> 1.1.7-10)
[2013-08-03 13:41] [PACMAN] upgraded twisted (13.0.0-1 -> 13.1.0-1)
[2013-08-03 13:41] [PACMAN] upgraded videoproto (2.3.1-2 -> 2.3.2-1)
[2013-08-03 13:41] [PACMAN] upgraded virtuoso-base (6.1.6-2 -> 6.1.7-1)
[2013-08-03 13:41] [PACMAN] upgraded virtuoso (6.1.6-2 -> 6.1.7-1)
[2013-08-03 13:41] [PACMAN] installed ffmpeg-compat (1:0.10.8-4)
[2013-08-03 13:42] [PACMAN] upgraded vlc (2.0.7-2 -> 2.0.8.a-1)
[2013-08-03 13:42] [PACMAN] upgraded webkitgtk (2.0.3-1 -> 2.0.4-1)
[2013-08-03 13:42] [PACMAN] upgraded wine (1.6rc5-1 -> 1.7.0-1)
[2013-08-03 13:42] [PACMAN] upgraded xorg-iceauth (1.0.5-1 -> 1.0.6-1)
[2013-08-03 13:42] [PACMAN] upgraded youtube-dl (2013.07.17.1-1 -> 2013.07.25.2-1)

Okay, so it turns out that this was caused by the Catalyst bug described in this post. Reverting to the 13.6 version solved the problem. Lesson learned: if there's a ton of memory being used that isn't owned by a running process, start looking for bug reports involving drivers. Especially drivers known for being, well, pretty bad. Was there any method I could have used that would have told me that Catalyst was using all my ram, or is kernel-space memory usage pretty much a black box?
Last edited by Chaotechnician (2013-08-08 00:10:43)

SQL Developer High Memory Consumption 3.2.20.09.87

Hello,
I have been using SQL developer for quite some time and had initially had problems in the past with high memory consuption when I use this tool.
I have received and applied advice from this forum and while it had helped a little, the majority of the high memory consuption remained an issue.
I finally got more time to dig around and try to specifically isolate where the problem seems to be coming from and here is what I found.
*1)* I have removed the Check for Updates feature
*2)* I have turned off many of the extensions except for DBA Navigator, Real Time SQL Monitoring, SearchBar and Snippet.
*3)* When I start a fresh SQL Developer Session and initiate a Oracle Connection the application consumes roughly 148 meg fo RAM
*4)* When I open my Windows Task Manager and watch the memory allocated to SQL Developer I notice it goes up when I move my mouse over the SQL Developer tool and When I run through menus at roughly 5k a second or so and the memory is never released back to the system.
*5)* When I run a Large SQL to the grid the memory jumps by about 100 meg or so and will continue to do so every time I repeat the SQL until SQL Developer consumes roughly 748 meg of RAM.
*6)* 748 Meg of RAM seems to be the number when SQL Developer (with one Oracle connection) no longer continues to consume more and then not return the memory to the system.
Is there a way to have SQL Developer automatically clear up it's active memory usage without closing it down and restarting it?
Why does SQL Developer continue to consume more and more memory just from moving your mouse over it and/or by navigating menus?
Here is my About Detail;
Oracle SQL Developer 3.2.20.09
Version 3.2.20.09
Build MAIN-09.87
Copyright © 2005, 2012 Oracle. All Rights Reserved.
IDE Version: 11.1.1.4.37.59.48
Product ID: oracle.sqldeveloper
Product Version: 11.2.0.09.87
Version
Component     Version
=========     =======
Java(TM) Platform     1.6.0_35
Oracle IDE     3.2.20.09.87
Properties
Name     Value
====     =====
awt.toolkit     sun.awt.windows.WToolkit
class.load.environment     oracle.ide.boot.IdeClassLoadEnvironment
class.load.log.level     CONFIG
class.transfer     delegate
file.encoding     Cp1252
file.encoding.pkg     sun.io
file.separator     \
ice.browser.forcegc     false
ice.pilots.html4.ignoreNonGenericFonts     true
ice.pilots.html4.tileOptThreshold     0
ide.AssertTracingDisabled     true
ide.bootstrap.start     109707460930968
ide.build     MAIN-09.87
ide.conf     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.config_pathname     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
ide.debugbuild     false
ide.devbuild     false
ide.extension.search.path     sqldeveloper/extensions:jdev/extensions:ide/extensions
ide.firstrun     true
ide.java.minversion     1.6.0_04
ide.launcherProcessId     3276
ide.main.class     oracle.ide.boot.IdeLauncher
ide.patches.dir     ide/lib/patches
ide.pref.dir     C:\Users\twilliams\AppData\Roaming\SQL Developer
ide.pref.dir.base     C:\Users\twilliams\AppData\Roaming
ide.product     oracle.sqldeveloper
ide.shell.enableFileTypeAssociation     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloperW.exe
ide.splash.screen     splash.gif
ide.startingArg0     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloperW.exe
ide.startingcwd     C:\app\twilliams\product\11.2.0\client_3\SQLDEVELOPER\SQLDEVELOPER\BIN
ide.user.dir     C:\Users\twilliams\AppData\Roaming\SQL Developer
ide.user.dir.var     IDE_USER_DIR
ide.work.dir     C:\Users\twilliams\Documents\SQL Developer
ide.work.dir.base     C:\Users\twilliams\Documents
ilog.propagatesPropertyEditors     false
java.awt.graphicsenv     sun.awt.Win32GraphicsEnvironment
java.awt.printerjob     sun.awt.windows.WPrinterJob
java.class.path     ..\..\ide\lib\ide-boot.jar
java.class.version     50.0
java.endorsed.dirs     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\endorsed
java.ext.dirs     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\ext;C:\Windows\Sun\Java\lib\ext
java.home     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre
java.io.tmpdir     c:\Temp\
java.library.path     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\app\twilliams\product\11.2.0\client_3\bin;C:\app\twilliams\product\11.2.0\client_3;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Lenovo\Access Connections\;C:\Program Files\WinMerge;C:\Program Files\ThinkPad\Bluetooth Software\;.
java.naming.factory.initial     oracle.javatools.jndi.LocalInitialContextFactory
java.protocol.handler.pkgs     oracle.jdevimpl.handler
java.runtime.name     Java(TM) SE Runtime Environment
java.runtime.version     1.6.0_35-b10
java.specification.name     Java Platform API Specification
java.specification.vendor     Sun Microsystems Inc.
java.specification.version     1.6
java.util.logging.config.file     logging.conf
java.vendor     Sun Microsystems Inc.
java.vendor.url     http://java.sun.com/
java.vendor.url.bug     http://java.sun.com/cgi-bin/bugreport.cgi
java.version     1.6.0_35
java.vm.info     mixed mode
java.vm.name     Java HotSpot(TM) Client VM
java.vm.specification.name     Java Virtual Machine Specification
java.vm.specification.vendor     Sun Microsystems Inc.
java.vm.specification.version     1.0
java.vm.vendor     Sun Microsystems Inc.
java.vm.version     20.10-b01
jdbc.driver.home     /C:/app/twilliams/product/11.2.0/client_3/
jdbc.library     /C:/app/twilliams/product/11.2.0/client_3/jdbc/lib/ojdbc6.jar
line.separator     \r\n
oracle.home     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper
oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG     true
oracle.jdbc.mapDateToTimestamp     false
oracle.translated.locales     de,es,fr,it,ja,ko,pt_BR,zh_CN,zh_TW
oracle.xdkjava.compatibility.version     9.0.4
orai18n.library     /C:/app/twilliams/product/11.2.0/client_3/jlib/orai18n.jar
os.arch     x86
os.name     Windows 7
os.version     6.1
path.separator     ;
reserved_filenames     con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout,conout$
sqldev.debug     false
sun.arch.data.model     32
sun.boot.class.path     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\resources.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\rt.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\sunrsasign.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\jsse.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\jce.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\charsets.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\modules\jdk.boot.jar;C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\classes
sun.boot.library.path     C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\bin
sun.cpu.endian     little
sun.cpu.isalist     pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
sun.desktop     windows
sun.io.unicode.encoding     UnicodeLittle
sun.java2d.ddoffscreen     false
sun.jnu.encoding     Cp1252
sun.management.compiler     HotSpot Client Compiler
sun.os.patch.level     Service Pack 1
user.country     US
user.dir     C:\app\twilliams\product\11.2.0\client_3\SQLDEVELOPER\SQLDEVELOPER\BIN
user.home     C:\Users\twilliams
user.language     en
user.name     twilliams
user.timezone     America/Los_Angeles
user.variant
windows.shell.font.languages
Extensions
Name     Identifier     Version     Status
====     ==========     =======     ======
Check For Updates     oracle.ide.webupdate     11.1.1.4.37.59.48     Loaded
Code Editor     oracle.ide.ceditor     11.1.1.4.37.59.48     Loaded
Component Palette     oracle.ide.palette1     11.1.1.4.37.59.48     Loaded
Data Miner     oracle.dmt.dataminer     11.2.1.1.09.87     Disabled by user
Database Connection Support     oracle.jdeveloper.db.connection     11.1.1.4.37.59.48     Loaded
Database Object Explorers     oracle.ide.db.explorer     11.1.1.4.37.59.48     Loaded
Database UI     oracle.ide.db     11.1.1.4.37.59.48     Loaded
Diagram Framework     oracle.diagram     11.1.1.4.37.59.48     Loaded
Diagram Javadoc Extension     oracle.diagram.javadoc     11.1.1.4.37.59.48     Loaded
Diagram Thumbnail     oracle.diagram.thumbnail     11.1.1.4.37.59.48     Loaded
Diff/Merge     oracle.ide.diffmerge     11.1.1.4.37.59.48     Loaded
Extended IDE Platform     oracle.javacore     11.1.1.4.37.59.48     Loaded
External Tools     oracle.ide.externaltools     11.1.1.4.37.59.48     Loaded
File Support     oracle.ide.files     11.1.1.4.37.59.48     Loaded
Help System     oracle.ide.help     11.1.1.4.37.59.48     Loaded
History Support     oracle.jdeveloper.history     11.1.1.4.37.59.48     Loaded
Import/Export Support     oracle.ide.importexport     11.1.1.4.37.59.48     Loaded
Index Migrator support     oracle.ideimpl.indexing-migrator     11.1.1.4.37.59.48     Loaded
JDeveloper Runner     oracle.jdeveloper.runner     11.1.1.4.37.59.48     Loaded
JViews Registration Addin     oracle.diagram.registration     11.1.1.4.37.59.48     Loaded
Log Window     oracle.ide.log     11.1.1.4.37.59.48     Loaded
Mac OS X Adapter     oracle.ideimpl.apple     11.1.1.4.37.59.48     Loaded
Navigator     oracle.ide.navigator     11.1.1.4.37.59.48     Loaded
Object Gallery     oracle.ide.gallery     11.1.1.4.37.59.48     Loaded
Oracle IDE     oracle.ide     11.1.1.4.37.59.48     Loaded
Oracle SQL Developer     oracle.sqldeveloper     11.2.0.09.87     Loaded
Oracle SQL Developer - 3rd Party Database Browsers     oracle.sqldeveloper.thirdparty.browsers     11.2.0.09.87     Loaded
Oracle SQL Developer - APEX Listener Administration     oracle.sqldeveloper.listener     11.2.0.09.87     Loaded
Oracle SQL Developer - Change Mangement     oracle.sqldeveloper.em_cm     11.2.0.09.87     Loaded
Oracle SQL Developer - DBA Navigator     oracle.sqldeveloper.dbanavigator     11.2.0.09.87     Loaded
Oracle SQL Developer - Database Cart     oracle.sqldeveloper.dbcart     11.2.0.09.87     Loaded
Oracle SQL Developer - Extras     oracle.sqldeveloper.extras     11.2.0.09.87     Loaded
Oracle SQL Developer - File Navigator     oracle.sqldeveloper.filenavigator     11.2.0.09.87     Loaded
Oracle SQL Developer - Migrations Antlr3 Translator     oracle.sqldeveloper.migration.translation.core_antlr3     11.2.0.09.87     Missing dependencies: oracle.sqldeveloper.migration
Oracle SQL Developer - Migrations Application Migration     oracle.sqldeveloper.migration.application     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations Core     oracle.sqldeveloper.migration     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations DB2     oracle.sqldeveloper.migration.db2     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations DB2 Translator     oracle.sqldeveloper.migration.translation.db2     11.2.0.09.87     Missing dependencies: oracle.sqldeveloper.migration, oracle.sqldeveloper.migration.translation.core_antlr3
Oracle SQL Developer - Migrations Microsoft Access     oracle.sqldeveloper.migration.msaccess     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations Microsoft SQL Server     oracle.sqldeveloper.migration.sqlserver     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations MySQL     oracle.sqldeveloper.migration.mysql     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations Sybase Adaptive Server     oracle.sqldeveloper.migration.sybase     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations T-SQL Translator     oracle.sqldeveloper.migration.translation.core     11.2.0.09.87     Missing dependencies: oracle.sqldeveloper.migration
Oracle SQL Developer - Migrations Teradata     oracle.sqldeveloper.migration.teradata     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Migrations Teradata SQL Translator     oracle.sqldeveloper.migration.translation.teradata_translator     11.2.0.09.87     Missing dependencies: oracle.sqldeveloper.migration, oracle.sqldeveloper.migration.translation.core
Oracle SQL Developer - Migrations Translation UI     oracle.sqldeveloper.migration.translation.gui     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Object Viewer     oracle.sqldeveloper.oviewer     11.2.0.09.87     Loaded
Oracle SQL Developer - Real Time SQL Monitoring     oracle.sqldeveloper.sqlmonitor     11.2.0.09.87     Loaded
Oracle SQL Developer - Reports     oracle.sqldeveloper.report     11.2.0.09.87     Loaded
Oracle SQL Developer - Scheduler     oracle.sqldeveloper.scheduler     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Schema Browser     oracle.sqldeveloper.schemabrowser     11.2.0.09.87     Loaded
Oracle SQL Developer - SearchBar     oracle.sqldeveloper.searchbar     11.2.0.09.87     Loaded
Oracle SQL Developer - Security     oracle.sqldeveloper.security     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Snippet     oracle.sqldeveloper.snippet     11.2.0.09.87     Loaded
Oracle SQL Developer - Spatial     oracle.sqldeveloper.spatial     11.2.0.09.87     Disabled by user
Oracle SQL Developer - TimesTen     oracle.sqldeveloper.timesten     11.2.0.09.87     Disabled by user
Oracle SQL Developer - Tuning     oracle.sqldeveloper.tuning     11.2.0.09.87     Loaded
Oracle SQL Developer - Unit Test     oracle.sqldeveloper.unit_test     11.2.0.09.87     Disabled by user
Oracle SQL Developer - User Extensions Support     oracle.sqldeveloper.userextensions     11.2.0.09.87     Loaded
Oracle SQL Developer - Worksheet v2     oracle.sqldeveloper.worksheet     11.2.0.09.87     Loaded
Oracle SQL Developer - XML Schema     oracle.sqldeveloper.xmlschema     11.2.0.09.87     Loaded
Oracle SQL Developer Data Modeler     oracle.datamodeler     3.1.4.710     Disabled by user
Oracle SQL Developer Data Modeler - Reports     oracle.sqldeveloper.datamodeler_reports     11.2.0.09.87     Disabled by user
PROBE Debugger     oracle.jdeveloper.db.debug.probe     11.1.1.4.37.59.48     Loaded
Peek     oracle.ide.peek     11.1.1.4.37.59.48     Loaded
Persistent Storage     oracle.ide.persistence     11.1.1.4.37.59.48     Loaded
Property Inspector     oracle.ide.inspector     11.1.1.4.37.59.48     Loaded
QuickDiff     oracle.ide.quickdiff     11.1.1.4.37.59.48     Loaded
Replace With     oracle.ide.replace     11.1.1.4.37.59.48     Loaded
Runner     oracle.ide.runner     11.1.1.4.37.59.48     Loaded
VHV     oracle.ide.vhv     11.1.1.4.37.59.48     Loaded
Versioning Support     oracle.jdeveloper.vcs     11.1.1.4.37.59.48     Disabled by user
Versioning Support for Subversion     oracle.jdeveloper.subversion     11.1.1.4.37.59.48     Missing dependencies: oracle.jdeveloper.vcs
Virtual File System     oracle.ide.vfs     11.1.1.4.37.59.48     Loaded
Web Browser and Proxy     oracle.ide.webbrowser     11.1.1.4.37.59.48     Loaded
XML Editing Framework IDE Extension     oracle.ide.xmlef     11.1.1.4.37.59.48     Loaded
audit     oracle.ide.audit     11.1.1.4.37.59.48     Loaded
classpath: protocol handler extension     oracle.jdeveloper.classpath     11.1.1.0.0     Loaded
jdukshare     oracle.bm.jdukshare     11.1.1.4.37.59.48     Loaded
mof-xmi     oracle.mof.xmi     11.1.1.4.37.59.48     Loaded
oracle.ide.dependency     oracle.ide.dependency     11.1.1.4.37.59.48     Loaded
oracle.ide.indexing     oracle.ide.indexing     11.1.1.4.37.59.48     Loaded
palette2     oracle.ide.palette2     11.1.1.4.37.59.48     Loaded
status     oracle.ide.status     11.1.1.4.37.59.48     Loaded
Thanks in advance...
Tom
Edited by: ERPDude on Feb 28, 2013 2:46 PM

Aces!!! You nailed it Gary...
Thank you.
I applied fixed noted in Re: Reduce SQLDeveloper memory footprint with JDK 1.7
For others, to summarize my changes.
product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
AddVMOption -XX:+UnlockExperimentalVMOptions
AddVMOption -XX:+UseG1GC
AddVMOption -XX:MaxGCPauseMillis=50
AddVMOption -XX:GCPauseIntervalMillis=200
AddVMOption -XX:MaxPermSize=128M
AddVMOption -Xms50M
AddVMOption -Xmx384M
AddVMOption -XX:MinHeapFreeRatio=10
AddVMOption -XX:MaxHeapFreeRatio=10
product\11.2.0\client_3\sqldeveloper\ide\bin\ide.conf
comment the following two lines as shown below
#AddVMOption -Xmx640M
#AddVMOption -Xms128M
Now SQL Developer runs at roughly 500 meg.
I guess the only thing I have left to ask others reviewing this would be if there is a way to get these memory values down without having much adverse impacts on SQL Developer based on newer JVM switches/functionalities.
The posts that drove these changes are old from a technologoical perspective :) 2010.
Tom

Keep getting this msg: AVG HAS DETECTED A HIGH MEMORY USAGE BY FIREFOX--TOTAL MEMORY; 292 MB. I HAVE NO IDEA HOW TO CLEAR THIS

see question above and help me please... it's slowing down my computer.
JH

The figure may not necessarily be high depending what you are doing with firefox. Do you know how much RAM is installed on your computer ?
The report is apparently being generated by AVG software, you will need to consult the AVG manual or its faq/site/forum if you want to turn off such notifications.
Note if you go to ''about:memory'' in the firefox location bar it will generate a report that you may find useful. See also [[high memory usage]]

IOS IPS ver 5 and high memory usage

Hi,
Is anyone else having high memory issues when using ver 5? I have installed on a 1801 with 128 M memory. It only has 4 M free now. Is there a way to reduce the active signatures? I have disbaled some but the number of active is still at 338.
Thanks,
Scott

This issue usually occurs because of a memory leak. However it cannot be said that it is due to the IPS service running whcih is causing this problem. Following links may help you
http://www.cisco.com/en/US/products/ps6634/prod_white_papers_list.html
http://www.cisco.com/en/US/products/ps6634/products_white_paper0900aecd8057558a.shtml

High memory occupied in WLC

Similar Messages

Maybe you are looking for