High memory utilization after few days - ciscoworks LMS 4.0.1

Hello,
I have the problem that our ciscoworks server gets out of memory after few days. The memory utilization is always getting higher an higher (above 95%). Sometimes it is only after 3 days and sometimes it is after 1 week. So it happens not regulary. Has anyone an idea what could be the problem? I have made an screenshot from the services which use a lot of memory. And at this time the memory utilization is getting higher and higher again....I think there is a problem with tomcat or dbsrv10.exe, there are also a lot of cwjava.exe running.
Kindly regards
David Mayer

Hello,
I have the same problem. First time I've tried to upgrade memory from 8gb to 16gb but I am still experiencing same issues (Memory is running on 98%). I'm not sure exactly what process it is causing this issue, because when I've checked all proccesses from all users running on this server and count them there is no 15 gb at all. My guess is the same for tomcat server which is responsible for RME collector, or correct me if I'm wrong.
Do you have any idea what can cause this problem.
I've tried to upgrade then to Cisco works Prime lan management 4.1, but server went with same issues.
Thanks a lot

Similar Messages

CiscoWorks LMS 4.0.1 High Memory Utilization on Windows 2K8 R2

Hi,
What causes LMS 4.1 to have high memory utilization?

I made a little batch
https://supportforums.cisco.com/docs/DOC-21031
It show what process in LMS is eating you RAM / Hogging the CPU.
I don't think resources are used very effectivly in LMS
I did have the impression that some virtual machines running LMS 3.2 actually performed better than real machines, as if the VMware saw it load all these java virtual machines and that it was 45 times the same thing only being used for a few % and therefore could be swapped to disk, leaving the resources to what was actually working in LMS.
What worries me more than the resources used is the gui per.formance.
Cheers,
Michel

C3750 Unable to ssh after few days!

Hi all,
If anyone could help me please, I'm having a problem with my switch, it seems that I'm losing the ablity to ssh to the switch after few days but if I reload it I can ssh into it again with no problem! At first I thought it was something wrong with my configuration so I've reconfugred the ssh, username, domain name and cleaned the rsa keys and regenrated new new ones.
My switch version is:
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9NPE-M), Version 15.0(1)SE3, RELEASE SOFTWARE (fc1)

Thank you guys for the reply,
This is what I get when I try to ssh:
ssh [email protected]
[email protected]'s password:
Permission denied, please try again.
And Leo Laohoo, you guessed it right! it's look like a memory leaks, this is the output for "sh log":
*Mar 5 17:19:57.579: %AAA-3-ACCT_LOW_MEM_UID_FAIL: AAA unable to create UID for incoming calls due to insufficient processor memory
*Mar 5 17:19:58.385: %AAA-3-ACCT_LOW_MEM_UID_FAIL: AAA unable to create UID for incoming calls due to insufficient processor memory
*Mar 5 17:19:59.005: %AAA-3-ACCT_LOW_MEM_UID_FAIL: AAA unable to create UID for incoming calls due to insufficient processor memory
*Mar 6 23:22:38.979: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:!exec: enable
cs08#
Do you guys think of any work around other than down/upgrade the software? cuase the biggest issue now is, it's one of 9 switches that all run the same ISO version and all of them are on new production data center, and honestly I've had other weird issue with other switches too!

Photoshop Lag on Windows 8 after few days after installation

Hi all guys. I need your help if anybody can help me. When I install Photoshop everything is working perfectly but after few days Photoshop starts lagging. If I unninstall it and install it again there is not any lag and It's working good but after few days the lag is back. I'm confused really because on Windows 7 there is not that lag (Just on Windows 8). I'm using Photoshop in my job pretty much and this problem confuse me.

Everything is slowing down. If I make selection it takes effect after 3-4 seconds, if I'm using brush it takes effects after 3-4 seconds too. Whole Photoshop is lagging.

I have purchased IPhone 5S in Florida Mall when I was traveling to US.I bought this phone in unlocked condition. (Pl find attached Invoice copy).I started my phone when I came back in India. After few days (4-5 days) it started giving blue dump regularly.

Dear All,
I have purchased IPhone 5S in Florida Mall when I was traveling to US from India.I bought this phone in unlocked condition. I started my phone when I came back in India. After few days (4-5 days) it started giving blue dump regularly. Then I have contacted Authorized service centre (Maple) in India (Maharashtra – New Mumbai) and then Maple checked with Apple and Apple said this phone is not under International Warranty. But when I purchased this phone form Apple Florida Mall ,I have been told by Zach McKenzie (Sales Person) that it has an international warranty and u can approach to any authorized centre in India for any issues. And that’s the reason I have bought this phone.
But now I am in big trouble so tell me how can u help me in this regards.

Note this is a user forum hosted by Apple. You aren't talking to Apple here just other users.
Note that the iPhone warranty is NOT international and never has been. Your iPhone must be serviced in the country of purchase.
https://www.apple.com/legal/warranty/

I was using 3G in my iPad 3, after few days the 3G icon dispeared and instead E icon appeared and my internet is working slow with this E

i was using 3G in my iPad 3, after few days the 3G icon disappeared and instead E icon appeared and my net is very slow with this E icon

Did you Check in settings - cellular data that 3G is enabled? Menus could be named slightly different since I use iOS 6.

I have 2 iphone 3gs so i plugged 1 of them into my laptop and i downloaded i tunes everything was ok i downloaded songs so after few days i got the other i phone and i did the same thing but every thing (pictures,contacts)of the1 phone was restored to2

i have 2 iphone 3gs so i plugged 1 of them into my laptop and i downloaded i tunes everything was ok i downloaded songs so after few days i got the other i phone and i did the same thing but every thing (pictures,contacts)of the1 phone was restored to the second i phone and all the pictures of the 2 phone had gone and it only had pictures and contacts of the 1 phone anybody plz help i am in egypt and there is noo apple stores in egypt so plz help

plzzzzz help quick

NB305-105 - Battery empty after few days

Hi,
I have a Toshiba NB305-105 (2 Gb Ram - 250 GB HDD) with Windows 7 (64) Ultimate. My battery (6 cells) has a long life about 6 hours but I don't manage why when switch-on the day after the PC the battery is discharged. I verify that PC is right switch-off and not in hibernate/stand-by but after some days the battery is complete empty.
Someone has had the same problems?
Thank for any help.
Regards

Hey,
After few days the battery shouldnt be empty but it will lose a little bit power, thats normal behavior on all notebooks. Normally up to 5-10% is normal each night/day.
In your case I would check the BIOS. There you should find options like Wake up on LAN, Wake up on Keyboard and USB Sleep & Charge. Disable all these options because they are consuming power while notebook is turned off.
I did the same after this it lose just 2-4% so its very good! :)

TS1470 hi i have an iphone 4s i did an update to ios 7 , after few days i got message to update it againe to 7.0.2 but i got a message to connect my iphone to the itune.and in my computer i got a message the iphone could not be restored error occurred 29

hi i have an iphone 4s i did an update to ios 7 , after few days i got message to update it againe to 7.0.2 but i got a message to connect my iphone to the itune.and in my computer i got a message the iphone could not be restored error occurred 29

l3az wrote:
... got a message the iphone could not be restored error occurred 29
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart

Hi, I recently updated my IOS to 7.1.1. After few days the camera apps is missing. I'm not able to find camera anywhere in my mobile. Please help me to get it back. thanks

Hi, I recently updated my IOS to 7.1.1. After few days the camera apps is missing. I'm not able to find camera anywhere in my mobile. Please help me to get it back. thanks

Hello there, Kumarlmk.
The following Featured Discussion deals with the issue you seem to be describing and provides some workable solutions:
The Camera app is suddenly missing from...: Apple Support Communities
https://discussions.apple.com/thread/5284736
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Windows Server 2012 High Memory Utilization(Three Hyper-V Instance Configure in this Server For Lync)

Hello There,
Issue: High Memory Utilization in Below Scenario. Pl. See the below configuration of Win 12 Server
Pl. see for committed memory bytes . m little bit confused that about committed memory
OS: Windows Server 2012
Memory: Total 24 GB Free:1.3 GB Committed:27.6 GB
App Configure: Three Hyper V Instances Configure For Lync Server 2013
Pls provide me solution on this issue

Virtual memory system. Committed memory is the physical memory for which space has been reserved in the disk paging file. So, you are paging, which is quite common in virtual memory systems.
On a completely different topic. Lync is an application that works best on real cores. Most systems are configured by default to use hyperthreading. Hyperthreading increases the logical processor count on a system and logical processors
are treated equally. Since a hyperthread 'core' (logical processor) performs at a small fraction of a real core (logical processor), if you are running VMs that work best with real cores, it is best to change your BIOS on the Hyper-V host to disable
hyperthreading, sometimes called simultaneous multithreading (SMT).
. : | : . : | : . tim

My Mac Book Pro 13 inch shuts down when I insert some usb on port. It will be dead for few days (no power, can't charge as well, no restarting) and after few days it will work? Any one facing same issue and any solutions please...

My Mac Book Pro 13 inch shuts down when I insert some usb on port. It will be dead for few days (no power, can't charge as well, no restarting) and after few days it will work? Any one facing same issue and any solutions please...

Hi ohmghimire,
Thanks for visiting Apple Support Communities.
If you're seeing unexpected behavior when using USB devices, try resetting the SMC on your MacBook Pro:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the article with these steps here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
If you still see this behavior after resetting the SMC, or your computer won't turn on, try the steps in this article next:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Best Regards,
Jeremy

Extremely high memory usage after upgrading to Firefox 12

After I upgraded to Firefox 12, I began frequently experiencing Firefox memory usage ballooning extremely high (2-3GB after a few minutes of light browsing). Sometimes it will drop back down to a more reasonable level (a few hundred MB), sometimes it hangs (presumably while trying to garbage collect everything), and sometimes it crashes. Usually the crashing thread cannot be determined, but when it can be, it is in the garbage collection code ( [https://crash-stats.mozilla.com/report/list?signature=js%3A%3Agc%3A%3AMarkChildren%28JSTracer*%2C+js%3A%3Atypes%3A%3ATypeObject*%29] ).
I was able to capture an about:memory report when Firefox had gotten to about 1.5 GB and have attached an image.
A couple of things I've tried. I have lots of tabs open (though the Don't load tabs until selected option is enabled), so I copied my profile, kept all my extensions enabled, but closed all my tabs. I then left a page open to http://news.google.com/ and it ran fine for several days, whereas my original profile crashes multiple times a day.
I also tried disabling most of my extensions, leaving the following extensions that I refuse to browse without:
Adblock Plus
BetterPrivacy
NoScript
PasswordMaker
Perspectives
Priv3
However, the problem still happened in that case.
Don't know if any of this helps or not. I'm looking forward to trying Firefox 13 when it comes out.

hello, thanks for reporting back with detailed information.
from a brief look at your extensions i don't recognize any known (to me at least) memory leaking ones. in the last weeks there were also reports about the java plugin causing high memory consumption in combination with firefox 12 - in case you have it installed in firefox > addons > plugins try disabling it for a few days & test how firefox is behaving with many tabs.
& although probably not related to the memory problems you could update your graphics driver to get better results with hardware acceleration in firefox - this is the latest driver by intel for your model & os:
[http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21135&lang=eng&OSVersion=Windows%207%20%2864-bit%29*&DownloadType=Drivers]

ADFapplication stops working after few days of uptime : invalidobjname

We are currently doing uptime testing of our prodcut. We are using JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493. After 3 days uptime our application stops working and we are seeing following errors in the log :-
oracle.jbo.InvalidObjNameException: JBO-25005: Object name ViewDefMetadataManager4569314_-2147483397 of type View Row Set is invalid.
at oracle.jbo.server.ViewObjectImpl.getRowSetName(ViewObjectImpl.java:12683)
at oracle.jbo.server.ViewObjectImpl.createViewRowSet(ViewObjectImpl.java:12728)
at oracle.jbo.server.ViewObjectImpl.createViewRowSet(ViewObjectImpl.java:12718)
at oracle.jbo.server.ViewObjectImpl.getDefaultRowSet(ViewObjectImpl.java:2567)
at oracle.jbo.server.ViewObjectImpl.setIterMode(ViewObjectImpl.java:11165)
at oracle.adf.model.bean.DCDataVO.init(DCDataVO.java:148)
at oracle.adf.model.bean.DCBeanDataControl.executeIteratorBindingIfNeeded(DCBeanDataControl.java:996)
at oracle.adf.model.binding.DCIteratorBinding.executeQueryIfNeeded(DCIteratorBinding.java:2168)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3253)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:253)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3211)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:253)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3211)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:253)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3211)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2889)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3202)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2889)
at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareRender(FacesPageLifecycle.java:82)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$5.before(ADFPhaseListener.java:516)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:77)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:45)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:237)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:131)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.epm.fm.servlets.ExternalHfmSecurityServlet.doFilter(ExternalHfmSecurityServlet.java:60)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:181)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Looking at the trace it iloks weird that it is adding a -ve integer -2147483397 into the instance name.
Edited by: Abhishek on Apr 20, 2013 8:20 AM
Edited by: Abhishek on Apr 20, 2013 4:16 PM

After looking at ADF source code, ApplicationModuleImpl.doCreateViewObject() is referring to JboNameUtil.getInstNameFromDefName() which is using a static counter (int value) as suffix. The counter being an int value is reaching the upper limit and then turning out to negative when incremented and then leading to above exception.
In above stack trace the instance name is ViewDefMetadataManager4569314_-2147483397 , has a negative number at the end. So JboNameUtil.isNameValid(rsName) is returning false and the exception InvalidObjNameException is thrown at that point.
If this is the case, it appeared to be ADF bug.
Have you tested the application with application module pooling turned off? It might be an activation/passivation problem.
We use bean data control, no pooling configuration set.
Do you work in a cluster environment?
Yes but ADF is installed on a single server (Weblogic)
Do you see any more nested errors in the log?
This was the first error . After that we see same error whenever any of the UI is opened but with different VO name
Is it always three days before the error does up?
This is the first time uptime test is spawned to 3 days for this release
Does the application work after a refers or new login?
No, on new login , we see same error whenever any of the UIs is opened but with different VO name with -ve number at the end
Which operating system does the server run on? How much memory is installed?
Windows server 2008 , 16GB
Was there a high cpu usage at the time of the error?
We are testing it using load runner and multiple users

After HP support replaced Motherboard, the window 2008 r was running okay after few days I got a Black Screen stating windows is not genuine

After HP replaced the motherboard, and few days later I got a black desktop and windows not genuine afterwards. Any suggestion what I should do. I tried to use Microsoft support website on the server, and it will not let me proceed to any of their site.
The browser display security certification invalid. Any help would be appreciated.
Kind Regards

Have you tried re-activating your copy of Windows? Eg, either using the prompt that appears or going into My Computer properties and checking the activation status at the bottom of the page?
From memory, when you activate a copy of Windows it makes a note of the currently installed hardware (spec, serial numbers etc) so you can't just copy all the files onto another machine and use it there. My guess is that the setup has changed enough for
it to no longer recognise it as the same machine (though I thought it normally takes a few elements changing to trigger that reaction), and so thinks it's no longer genuine. Getting Windows to activate again may work, otherwise you'll probably need to phone
Microsoft to get them to sort it out and allow it to activate again.

High memory utilization after few days - ciscoworks LMS 4.0.1

Similar Messages

Maybe you are looking for