High monthly usage!!

My average monthly usage is 10gb. This month however I have so far reached 47gb and have done nothing more excessive. I Don't download music I have downloaded one movie from play this year and I don't do Online gaming. I phoned BT and they told me I used 10gb in one day. This was a day when nobody was in my house from 9to5 and the modem was switched off! My modem has a password etc. BT just keep saying it must be me?! Any ideas?

It is advisable to keep your router and modem on 24/7 unless you have a really good reason for doing otherwise.
Monitor your usage as described in this thread.
https://community.bt.com/t5/Bills-Packages/Unbelie​vable-BB-Usage/td-p/1237389
Using your Home Hub you can see what data is being used in realtime and what devices are connected so you need to know how to access this information.

Similar Messages

  • PC with slow boot and pc speed, sudden high pc usage, delay-freeze when opening/performing something

    Hi,
    Before everything, two things:
    1. I'm not a native english speaker so i may have some problems to speak properly/as objective as i'd like to.
    2 . I'm writing in this section because i don't know the cause of my pc issues so i can't categorize them.
    Now, my computer is a Toshiba satellite L755-S5244, Windows 7 Home premium 64 bits, Intel pentium CPU B940 2Ghz, 4 Gb RAM, and I'm writing this message using it.
    I bought the laptop in December of 2011 and at the beggining it was working normally. Someone else used the computer these last months and he left the pc without antivirus protection; when i installed one (Avast) and start to analyze the pc it suddenly shutted down. It wasn't able to boot, so after some trys to restore/enter in safe mode I finally used the Toshiba Recovery Wizard to get the pc to the original factory settings. The process was sucessfull, so the first thing i did after finish the process was install a new antivirus (this time i used Kaspersky Pure) and the the analysis showed no threats as i expected.
    However, before the recovery process i realized of some slow performance on the computer, like talking a bit too long to opening files or menus, control panel... almost anything was opening with a little delay even just after start the pc. This problem continued even after the recovery process. Also, an online game -League of legends- which was working fine when i just bought the pc, developed some issue: the screen and the audio randomly frezees for like 3-5 seconds. These problems seems to be related between each other.
    But that wasn't all. After the recovery to the original factory settings, i just installed a few things:
    -Kaspersky Pure 2.0, CCleaner (free), Mozila Firefox, and League of legends.
    Later I also installed Microsoft Office 2010.
    The antivirus showed no threats. The game kept with the freeze thing.
    And 2 days ago i was playing league of legends and downloading Skype when the pc suddenly got too slow. I restarted it. After the restart it took a long time to boot, and before the windows login screen loaded there was a black screen where only the mouse was showed; the start-up was slow too, (this one showed a blue screen with the mouse too -but not BSOD-) all this took like 15-20 minutes; that never happened before so i restarted the computer again but the problem was the same: slow boot, slow desktop start-up (let's not even talk about opening something).
    I went to the repair menu (f8) and try to restore the system but it didn't change anything. I checked for memory issues but there wasn't. I looked also for starting problems but the repair didn't find anything. All in there was saying: "the computer performance seems normal", but it wasn't. Like entering to windows in normal mode was talking to long, i tried the safe mode. It was also slow but not that much. When i entered, a system restore which i wasn't able to performance before in normal mode popped-up and said that the system was restored sucessfully to the first restore point -just after the factory recovery, but it apparently didn't fix the slow bot issue.
    Even in safe mode the software was working slow so i decided to go for the toshiba recovery wizard again, and looked in here, the forums -and the rest of the net- for problems like mine.
    This time the Toshiba Recovery Wizard took like ages to finish. 3 hours just for recovering, and like 7 more hours just installing the drivers. The boot/start-up was still slow, so i think this was the cause of the slow recovery because the wizard restarts the computer a lot.
    When the factory settings recovery finished, the first boot was slow, also the start up, the programs, the start menu, the control panel, ... everything was slow the first time i opened it. If i keep using the same program, it seems normal, but randomly freezes if i select some option, of press something (like this browser, google chrome, even now when i'm writing this message or before where i was registering into the forums). As obvious, because this slow performance i'm really not comfortable using this computer.
    I used the HDD SDD Alert but it says the HDD is working fine (the hard drive doesn't make weirds sounds, i almost don't hear it at all); also i did a PC Diagnostic with the PC diagnostic tool and everything passed the test. I can't think of virus/malware because i did the recovery wizard, twice. I just installed Avast again and it didn't find anything. With the task manager i noticed of a high pc usage (almost always 100%) was showing for a really short moment when/after the computer freezes.
    So, i don't know how to solve this slow performance.
    The last thing i did was download those speed-up softwares: SpeedUpMyPc, RegCurePro, SpeedyPC pro and Pareto logic Health Advisor. They scanned the pc for free and found like 100 system performance issues, but I'm not able to use these programms to fix the issues if i dont buy them. Also i'm not even sure if that will fix my problems.
    That's why i'm here, looking for a way to identify/fix them. One last thing: all this time i've been checking the temperature of the laptop but is never hot -now is not even warm. Now i'm afraid of restarting the PC again cuz i know it will take a long time to get into a kinda stable performance like right now.
    So that's all.  If you read all this, have my thanks. Also, any help would be really appreciated it.
    EDIT: 
    A new thing happened. When i try to installed league of legends, the setup told me that my hard drive may be corrupted and the file won't copy, i skip it a few times but the installation took a long of time (half hour) and the error kept ocurring.  I hope this can may be a clue about what is happening to my pc. 

    Satellite L755-S5244
    If you restore the hard disk to its original out-of-the-box contents using Toshiba recovery media and still have trouble, then you know it's not due to software.
    the setup told me that my hard drive may be corrupted and the file won't copy, i skip it a few times but the installation took a long of time (half hour) and the error kept ocurring.
    In particular, that sort of thing occurs when a hard drive is failing. Time to call Toshiba's tech support at 1-800-457-7777 (from the US) or 1-949-859-4273 (from outside the US).
    -Jerry

  • CF 10 sp 12 Enterprise  high CPU usage hangs services, 2012 server on 2012 Hyper-V host

    The last 2 days - my [removed link] CF site has suffered from high CPU usage (on and off) that stops functionality.
    This will last several minutes then suddenly the high usage stops a few minute later the high cpu usage starts again.
    I don't have any scheduled processes allowed to run.
    Restarting the coldfusion service  during a high CPS incident - the cpu usage just picks up where it left off when restarted.
    I have assigned 4 CPUs (normal) or 8CPUs  (as a test) to the VM and I get the same high CPU then low usage. This is a fresh install several months ago on a new VM.
    I'd like some Adobe support on this issue but can't seem to find the contact phone number.
    This series of high and low cpu usage first started Monday AM about midnight until 7:00 AM  Tuesday was quiet and Wednesday this AM I'm having the same issues.
    Ideas?
    Update:  While waiting for this to post - the high CPU usage started again and this time I stopped and restarted the Jetty service ... and the CPU usage went away...
    Update: the high cpu started again and a restart of the jetty service didn't help --- neither did the .net service restart... the cf10 application service did stop the high usage...
    Jay Bietz
    Message was edited by: Jay Bietz after post accepted.

    After 2 hang free days -- Friday midnight (above is the gcviewer )  and ~2 hours later had the hang condition again.  Current java.config includes
    java.args=-server  -Xms4096m -Xmx4096m -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005 -XX:PermSize=512m -XX:MaxPermSize=512m -XX:+UseParallelGC -Xbatch -Dcoldfusion.home={application.home} -Dcoldfusion.rootDir={application.home} -Dcoldfusion.libPath={application.home}/lib -Dorg.apache.coyote.USE_CUSTOM_STATUS_MSG_IN_HEADER=true -Dcoldfusion.jsafe.defaultalgo=FIPS186Random -Dcom.sun.management.jmxremote.port=8701 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false -Xmn1024m -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGC -verbose:gc -Xloggc:cfwhispererGClive4.log -Dcoldfusion.classPath={application.home}/lib/updates,{application.home}/lib,{application .home}/lib/axis2,{application.home}/gateway/lib/,{application.home}/wwwroot/WEB-INF/flex/j ars,{application.home}/wwwroot/WEB-INF/cfform/jars,C:\\CFusion10\\cfusion\\verisign\\payfl owpro\\Java\\PFProColdFusion,C:\\CFusion10\\cfusion\\verisign\\payflowpro\\Java\\PFProCold Fusion\\Verisign.jar
    GCviewer shows that the full GCcollections suddenly start firing off many times in a short period of time.
    Jay
    will work on the tomcatlog issues next.

  • Excessively High CPU usage on my Equium M70

    HI,
    Recently in the last month my CPU usage as been hitting 100% when Im not running any taxing software (just internet explorer and windows media player).
    This is slowing down loading times and the area near the fan is pretty hot.
    I have an Equium M70-337, with a 1.7 centrino processor, and now 2 gigs of RAM (formerly 512 megabytes). I upgraded the ram in December and had no problem like this, now it's just started happening recently, I haven't installed anything that would do it, there are no unnecessary programs running and this was after I restored my comp to factory settings with the startup disc (about a month after) so it seems to have come from nowhere. On the task manager list it shows my web browser and media player using up the majority of CPU but I could have sworn that they didn't use up this much before.
    I don't know if the RAM would have been a factor but it was the correct ram for it and windows acknowledged to 2 gigs.
    Why would this have happened suddenly, any ideas guys?

    Hi
    I have the same notebook model and at the moment I do not have such problems. To be honest I have made clean OS installation 3 months ago and after Microsoft update installation I have noticed that notebook does not run like before. Just for example: if I use IE7 intensively with several different tabs in task manager I can see that IE need over 300.000 k of memory and somehow blocks. After closing IE and ending the IE process sin task manager I can work normally again.
    I really do not know how is your OS configured but in task manager you should see which running process is responsible for high CPU usage. Maybe some antivir application? Sorry but on this way it is really not easy to sayt why this happen. Play little bit with running processes.

  • Config Manager Agent - after Hardware Inventory High CPU Usage with WMIPRSVE and very fast empty Battery

    Hi there,
    since a few days there is on some machines (40-60) a high cpu usage on one core (quad core cpu machines) with the WMIPRSVE.EXE if the HARDWARE INVENTORY CYCLE started.
    i try out some tests, read some forum articles and troubleshooting the WMI management but a real problem i doesn´t see.
    in some articles i read that hardware inventory runs about minutes up to more hours but some machines runs longer, someone more as 1 day.
    here an example of mine PC:
    at 8:07 i started Hardware Inventory Cycle, in the InventoryAgent.log i can see that some Collection Namespace are captured.
    after a few minutes there stopped and does nothing round about 5.9 hours or better, after 21436.097 Seconds.
    For any hints i am grateful. :)
    Inventory: *********************** Start of message processing. ***********************
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    Inventory: Message type is InventoryAction InventoryAgent
    18.03.2015 08:09:56 11088 (0x2B50)
    Inventory: Temp directory = C:\WINDOWS\CCM\Inventory\Temp\
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    Inventory: Clearing old collected files. InventoryAgent
    18.03.2015 08:09:56 11088 (0x2B50)
    Inventory: Opening store for action {00000000-0000-0000-0000-000000000001} ...
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    CInvState::VerifyInventoryVersionNumber: Mismatch found for '{00000000-0000-0000-0000-000000000001}': 4.2 vs. 0.0
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    Inventory: Version number mismatch; will do a Full report.
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    Inventory: Action=Hardware, ReportType=ReSync, MajorVersion=5, MinorVersion=0
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    Inventory: Initialization completed in 0.141 seconds
    InventoryAgent 18.03.2015 08:09:56
    11088 (0x2B50)
    Collection: Namespace = \\localhost\root\Microsoft\appvirt\client; Query = SELECT __CLASS, __PATH, __RELPATH, CachedLaunchSize, CachedPercentage, CachedSize, LaunchSize, Name, PackageGUID, TotalSize, Version, VersionGUID FROM Package; Timeout = 600 secs.
    InventoryAgent 18.03.2015 08:09:56
    7836 (0x1E9C)
    Failed to get IWbemService Ptr for \\localhost\root\vm\VirtualServer Namespace: 8004100E
    InventoryAgent 18.03.2015 08:10:02
    7836 (0x1E9C)
    Failed to enumerate instances of VirtualMachine: 8004100E
    InventoryAgent 18.03.2015 08:10:02
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, AddressWidth, BrandID, CPUHash, CPUKey, DataWidth, DeviceID, Family, Is64Bit, IsHyperthreadCapable, IsMobile, IsTrustedExecutionCapable, IsVitualizationCapable, Manufacturer,
    MaxClockSpeed, Name, NormSpeed, NumberOfCores, NumberOfLogicalProcessors, PCache, ProcessorId, ProcessorType, Revision, SocketDesignation, Status, SystemName, Version FROM SMS_Processor; Timeout = 600 secs.
    InventoryAgent 18.03.2015 08:10:02
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\CCM\powermanagementagent; Query = SELECT __CLASS, __PATH, __RELPATH, Requester, RequesterInfo, RequesterType, RequestType, Time, UnknownRequester FROM CCM_PwrMgmtLastSuspendError; Timeout = 600 secs.
    InventoryAgent 18.03.2015 08:10:03
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Availability, Description, DeviceID, Manufacturer, Name, Status FROM Win32_IDEController; Timeout = 600 secs.
    InventoryAgent 18.03.2015 08:10:03
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, BinFileVersion, BinProductVersion, Description, ExecutableName, FilePropertiesHash, FilePropertiesHashEx, FileSize, FileVersion, HasPatchAdded, InstalledFilePath, IsSystemFile,
    IsVitalFile, Language, Product, ProductCode, ProductVersion, Publisher FROM SMS_InstalledExecutable; Timeout = 600 secs.
    InventoryAgent 18.03.2015 08:10:03
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, DefaultIPGateway, DHCPEnabled, DHCPServer, DNSDomain, DNSHostName, Index, IPAddress, IPEnabled, IPSubnet, MACAddress, ServiceName FROM Win32_NetworkAdapterConfiguration; Timeout
    = 600 secs. InventoryAgent
    18.03.2015 14:06:43 7836 (0x1E9C)
    Collection: Namespace = \\.\root\Nap; Query = SELECT __CLASS, __PATH, __RELPATH, description, fixupState, friendlyName, id, infoClsid, isBound, percentage, registrationDate, vendorName, version FROM NAP_SystemHealthAgent; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:06:43
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2\sms; Query = SELECT __CLASS, __PATH, __RELPATH, AdditionalProductCodes, CompanyName, ExplorerFileName, FileDescription, FilePropertiesHash, FileSize, FileVersion, FolderPath, LastUsedTime, LastUserName, msiDisplayName,
    msiPublisher, msiVersion, OriginalFileName, ProductCode, ProductLanguage, ProductName, ProductVersion, SoftwarePropertiesHash FROM CCM_RecentlyUsedApps; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:06:43
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, BankLabel, Capacity, Caption, CreationClassName, DataWidth, Description, DeviceLocator, FormFactor, HotSwappable, InstallDate, InterleaveDataDepth, InterleavePosition, Manufacturer,
    MemoryType, Model, Name, OtherIdentifyingInfo, PartNumber, PositionInRow, PoweredOn, Removable, Replaceable, SerialNumber, SKU, Speed, Status, Tag, TotalWidth, TypeDetail, Version FROM Win32_PhysicalMemory; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:07:02
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Availability, Description, DeviceID, InstallDate, Manufacturer, Name, PNPDeviceID, ProductName, Status FROM Win32_SoundDevice; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:07:02
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Caption, ClassGuid, ConfigManagerErrorCode, ConfigManagerUserConfig, CreationClassName, Description, DeviceID, Manufacturer, Name, PNPDeviceID, Service, Status, SystemCreationClassName,
    SystemName FROM Win32_USBDevice; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Collection: 62/74 inventory data items successfully inventoried.
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Inventory: Collection Task completed in 21436.097 seconds
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Inventory: 12 Collection Task(s) failed. InventoryAgent
    18.03.2015 14:07:12 7836 (0x1E9C)
    Inventory: Temp report = C:\WINDOWS\CCM\Inventory\Temp\25bf01b2-12fc-4eea-8e97-a51b3c75ba50.xml
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Inventory: Starting reporting task. InventoryAgent
    18.03.2015 14:07:12 7552 (0x1D80)
    Reporting: 4381 report entries created. InventoryAgent
    18.03.2015 14:07:13 7552 (0x1D80)
    Inventory: Reporting Task completed in 1.030 seconds
    InventoryAgent 18.03.2015 14:07:13
    7552 (0x1D80)
    Inventory: Successfully sent report. Destination:mp:MP_HinvEndpoint, ID: {5541A94A-BED9-4132-AE54-110CB6896F02}, Timeout: 80640 minutes MsgMode: Signed, Not Encrypted
    InventoryAgent 18.03.2015 14:07:13
    7552 (0x1D80)
    Inventory: Cycle completed in 21453.570 seconds
    InventoryAgent 18.03.2015 14:07:30
    7552 (0x1D80)
    Inventory: Action completed. InventoryAgent
    18.03.2015 14:07:30 7552 (0x1D80)
    Inventory: ************************ End of message processing. ************************
    InventoryAgent 18.03.2015 14:07:30
    7552 (0x1D80)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, Caption, ClassGuid, ConfigManagerErrorCode, ConfigManagerUserConfig, CreationClassName, Description, DeviceID, Manufacturer, Name, PNPDeviceID, Service, Status, SystemCreationClassName,
    SystemName FROM Win32_USBDevice; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Collection: 62/74 inventory data items successfully inventoried.
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Inventory: Collection Task completed in 21436.097 seconds
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Inventory: 12 Collection Task(s) failed. InventoryAgent
    18.03.2015 14:07:12 7836 (0x1E9C)
    Inventory: Temp report = C:\WINDOWS\CCM\Inventory\Temp\25bf01b2-12fc-4eea-8e97-a51b3c75ba50.xml
    InventoryAgent 18.03.2015 14:07:12
    7836 (0x1E9C)
    Inventory: Starting reporting task. InventoryAgent
    18.03.2015 14:07:12 7552 (0x1D80)
    Reporting: 4381 report entries created. InventoryAgent
    18.03.2015 14:07:13 7552 (0x1D80)
    Inventory: Reporting Task completed in 1.030 seconds
    InventoryAgent 18.03.2015 14:07:13
    7552 (0x1D80)
    Inventory: Successfully sent report. Destination:mp:MP_HinvEndpoint, ID: {5541A94A-BED9-4132-AE54-110CB6896F02}, Timeout: 80640 minutes MsgMode: Signed, Not Encrypted
    InventoryAgent 18.03.2015 14:07:13
    7552 (0x1D80)
    Inventory: Cycle completed in 21453.570 seconds
    InventoryAgent 18.03.2015 14:07:30
    7552 (0x1D80)
    Inventory: Action completed. InventoryAgent
    18.03.2015 14:07:30 7552 (0x1D80)
    Inventory: ************************ End of message processing. ************************
    InventoryAgent 18.03.2015 14:07:30
    7552 (0x1D80)

    InventoryAgent 18.03.2015 08:10:03
    7836 (0x1E9C)
    Collection: Namespace = \\.\root\cimv2; Query = SELECT __CLASS, __PATH, __RELPATH, DefaultIPGateway, DHCPEnabled, DHCPServer, DNSDomain, DNSHostName, Index, IPAddress, IPEnabled, IPSubnet, MACAddress, ServiceName FROM Win32_NetworkAdapterConfiguration; Timeout
    = 600 secs. InventoryAgent
    18.03.2015 14:06:43 7836 (0x1E9C)
    Collection: Namespace = \\.\root\Nap; Query = SELECT __CLASS, __PATH, __RELPATH, description, fixupState, friendlyName, id, infoClsid, isBound, percentage, registrationDate, vendorName, version FROM NAP_SystemHealthAgent; Timeout = 600 secs.
    InventoryAgent 18.03.2015 14:06:43
    7836 (0x1E9C)
    Looks like something in one or both of those wmi queries.  it goes from 8:10:03 to 14:06:43 right around there.  6 hours to do that... 
    try running those queries from wbemtest manually; and see which one just never finishes.
    Standardize. Simplify. Automate.

  • Very high memory usage..possible memory leak?  Solaris 10 8/07 x64

    Hi,
    I noticed yesterday that my machine was becoming increasingly slow, where once it was pretty snappy. It's a Compaq SR5250NX with 1GB of RAM. Upon checking vmstat, I noticed that the "Free" column was ~191MB. Now, the only applications I had open were FireFox 2.0.11, GAIM, and StarOffice. I closed all of them, and the number reported in the "Free" column became approximately 195MB. "Pagefile" was about 5.5x that size. There were no other applications running and it's a single user machine, so I was the only one logged in. System uptime: 9 days.
    I logged out, logged back in, to see if that had an affect. It did not. Rebooted and obviously, that fixed it. Now with only FireFox, GAIM, and a terminal open, vmstat reports "Free" as ~450MB. I've noticed if I run vmstat every few seconds, the "Free" total keeps going down. Example:
    unknown% vmstat
    kthr      memory            page            disk          faults      cpu
    r b w   swap  free  re  mf pi po fr de sr cd s0 s1 s2   in   sy   cs us sy id
    0 0 0 870888 450220  9  27 10  0  1  0  8  2 -0 -0 -0  595 1193  569 72  1 28
    unknown% vmstat
    kthr      memory            page            disk          faults      cpu
    r b w   swap  free  re  mf pi po fr de sr cd s0 s1 s2   in   sy   cs us sy id
    0 0 0 870880 450204  9  27 10  0  1  0  8  2 -0 -0 -0  596 1193  569 72  1 28
    unknown% vmstat
    kthr      memory            page            disk          faults      cpu
    r b w   swap  free  re  mf pi po fr de sr cd s0 s1 s2   in   sy   cs us sy id
    0 0 0 870828 450092  9  27 10  0  1  0  8  2 -0 -0 -0  596 1193  570 71  1 28
    unknown%Output of prstat -u Kendall (my username ) is as follows:
       PID USERNAME  SIZE   RSS STATE  PRI NICE      TIME  CPU PROCESS/NLWP
      2026 Kendall   124M   70M sleep   59    0   0:01:47 1.4% firefox-bin/7
      1093 Kendall    85M   77M sleep   59    0   0:07:15 1.1% Xsun/1
      1802 Kendall    60M   15M sleep   59    0   0:00:08 0.1% gnome-terminal/2
      1301 Kendall    93M   23M sleep   49    0   0:00:30 0.1% java/14
      1259 Kendall    53M   15M sleep   49    0   0:00:32 0.1% gaim/1
      2133 Kendall  3312K 2740K cpu1    59    0   0:00:00 0.0% prstat/1
      1276 Kendall    51M   12M sleep   59    0   0:00:11 0.0% gnome-netstatus/1
      1247 Kendall    46M   10M sleep   59    0   0:00:06 0.0% metacity/1
      1274 Kendall    51M   13M sleep   59    0   0:00:05 0.0% wnck-applet/1
      1249 Kendall    56M   17M sleep   59    0   0:00:07 0.0% gnome-panel/1
      1278 Kendall    48M 9240K sleep   59    0   0:00:05 0.0% mixer_applet2/1
      1245 Kendall  9092K 3844K sleep   59    0   0:00:00 0.0% gnome-smproxy/1
      1227 Kendall  8244K 4444K sleep   59    0   0:00:01 0.0% xscreensaver/1
      1201 Kendall  4252K 1664K sleep   59    0   0:00:00 0.0% sdt_shell/1
      1217 Kendall    55M   16M sleep   59    0   0:00:00 0.0% gnome-session/1
       779 Kendall    47M 2208K sleep   59    0   0:00:00 0.0% gnome-volcheck/1
       746 Kendall  5660K 3660K sleep   59    0   0:00:00 0.0% bonobo-activati/1
      1270 Kendall    49M   10M sleep   49    0   0:00:00 0.0% clock-applet/1
      1280 Kendall    47M 8904K sleep   59    0   0:00:00 0.0% notification-ar/1
      1199 Kendall  2928K  884K sleep   59    0   0:00:00 0.0% dsdm/1
      1262 Kendall    47M 2268K sleep   59    0   0:00:00 0.0% gnome-volcheck/1
    Total: 37 processes, 62 lwps, load averages: 0.11, 0.98, 1.63System uptime is 9 hours, 48 minutes. I'm just wondering why the memory usage seems so high to do...nothing. It's obviously a real problem as the machine turned very slow when vmstat was showing 195MB free.
    Any tips, tricks, advice, on which way to go with this?
    Thanks!

    Apologies for the delayed reply. School has been keeping me nice and busy.
    Anyway, here is the output of prstat -Z:
       PID USERNAME  SIZE   RSS STATE  PRI NICE      TIME  CPU PROCESS/NLWP
      2040 Kendall      144M   76M sleep   59    0   0:04:26 2.0% firefox-bin/10
    28809 Kendall     201M  193M sleep   59    0   0:42:30 1.9% Xsun/1
      2083 Kendall      186M   89M sleep   49    0   0:02:31 1.2% java/58
      2260 Kendall       59M   14M sleep   59    0   0:00:00 1.0% gnome-terminal/2
      2050 Kendall       63M   21M sleep   49    0   0:01:35 0.6% realplay.bin/4
      2265 Kendall     3344K 2780K cpu1    59    0   0:00:00 0.2% prstat/1
    29513 Kendall     71M   33M sleep   39    0   0:07:25 0.2% gaim/1
    28967 Kendall     56M   18M sleep   59    0   0:00:24 0.1% gnome-panel/1
    29060 Kendall     93M   24M sleep   49    0   0:02:58 0.1% java/14
    28994 Kendall     51M   13M sleep   59    0   0:00:23 0.1% wnck-applet/1
    28965 Kendall     49M   14M sleep   59    0   0:00:33 0.0% metacity/1
       649 noaccess   164M   46M sleep   59    0   0:09:54 0.0% java/23
    28996 Kendall     51M   12M sleep   59    0   0:00:50 0.0% gnome-netstatus/1
      2264 Kendall    1352K  972K sleep   59    0   0:00:00 0.0% csh/1
    28963 Kendall  9100K 3792K sleep   59    0   0:00:03 0.0% gnome-smproxy/1
    ZONEID    NPROC  SWAP   RSS MEMORY      TIME  CPU ZONE
         0           80          655M  738M    73%       1:18:40 7.7% global
    Total: 80 processes, 322 lwps, load averages: 0.27, 0.27, 0.22Sorry about the bad formatting, it's copied from the terminal.
    In any event, we can see that FireFox is sucking up 145MB (??!?!!? crazy...) XSun, 200MB, and java 190MB. I'm running Java Desktop System (Release 3) so I assume that is what accounts for the the high memory usage RE: java process. But, XSun, 200MB?
    Is this normal and I just need to toss another gig in, or what?
    Thanks

  • Norton reports high memory usage with firefox and it crashes often

    Norton antivirus 2011 has pop up warnings reporting high memory usage from Firefox. I have been getting theem often and my computer is crashing often after those pop up warnings. Thanks

    Safe mode did not help.
    I have disabled ALL extensions and plug-ins, but the problem with "zig-zag" memory usage still remains (I've not tried to leave browser open for the night yet).
    I think I'll do clean reinstall with completely new empty profile (without sync'ed information) to try this out. If this works, I'll start adding stuff (configuration, sync, features, etc) to see what causes the problem.

  • SA520W - High memory usage, possible fix in 2.2.0 firmware?

    As suggested by Thomas Watts, I'm starting a new thread to discuss the new SA520W firmware (2.2.0) and a possible resolution to high memory usage I'm experiencing on my network.
    My current setup is: 16Mbit DSL > SA520W > SA300-10, all with stock settings (no fancy VLAN's etc.)
    I have 4 CentOS 5/6 servers and a Windows 7 Ultimate station connected to the switch. I use CIFS to connect from Windows station to the other Linux servers and send large files. I currently notice the following behavior:
    When the file transfer starts, the Intel 1Gbit NIC is nearly saturated, hitting 115MB/sec. After few seconds, the data transfer comes to a halt and the transfer speed drops to around 50MB/sec. If I check the memory usage before the file transfer, it is approximately to 50-60% (on a fresh router reboot). Every time I send large files to other machines, the router memory consumption increases and it does not lower after a reasonable delay. I end-up with high memory near 90% and the only solution I have is to reboot the router in order to bring it back to 50%.
    Now, Thomas told me that this is simply a cosmetic issue, the memory is not actually 90% used. Yet, when the memory hits this threshold, I'm not capable to send files are normal LAN speeds I'm used to. Rebooting the router allows me to send only ONCE (and for few seconds) data at the expected LAN speeds.
    I would apreciate any input from Cisco engineers as well other users who experience the same issue. I would also like to know if any related work was done into 2.2.0 firmware and when we expect to have it released to users.
    Regards,
    Floren Munteanu

    Hi Tom,
    See below the answers.
    Are you currently running the 2.1.71 code?
    Yes
    Are you using IPS?
    No, the LAN is for internal use (no external users allowed)
    Are you using Protectlink services?
    No
    Hardware wise, I did not changed anything on machines. All boxes have dual Intel EXPI9301CT NIC's (LACP was planned) but I currently use single connections for sanity reasons (disks won't allow greater speeds anyway). Previous to Cisco, I used a Netgear ProSafe router + switch which did not encountered the issues I mention. Honestly, at first I thought I'm dealing with some stupid disk issues on Windows. So I ran a quick test and the stats are proper:
    > winsat disk -drive c
    > Disk  Sequential 64.0 Read                   109.62 MB/s        6.5
    > Disk  Random 16.0 Read                       2.47 MB/s          4.4
    > Responsiveness: Average IO Rate              2.12 ms/IO         6.9
    > Responsiveness: Grouped IOs                  8.34 units         7.4
    > Responsiveness: Long IOs                     5.59 units         7.7
    > Responsiveness: Overall                      46.63 units        7.1
    > Responsiveness: PenaltyFactor                0.0
    > Disk  Sequential 64.0 Write                  117.03 MB/s        6.7
    > Average Read Time with Sequential Writes     6.977 ms           5.3
    > Latency: 95th Percentile                     32.720 ms          3.0
    > Latency: Maximum                             118.231 ms         7.6
    > Average Read Time with Random Writes         13.346 ms          3.7
    > Total Run Time 00:01:39.50
    As I mentioned before, everything is pretty much stock on router/switch settings. If you have any tips that allow me to identify the cause, I would appreciate the input. What puzzles me is the speed drop and quick memory usage increase. It occurs 7-10 seconds after the transfers begins. It looks like the data transfer hangs for a very short period of time (less than half of second) and the transfer speed decreases from 110-115MB/sec to 50-60MB/sec. The transfer is completed at this speed. No matter how many other files I try to transfer after, the speed won't go higher than 60MB/sec. If I reboot the router, I get the same cycle.

  • Google Earth Plugin and LabVIEW: High CPU usage when adding placemarks

    Hi,
    I posted this question on stackoverflow earlier this week but feel it might be better suited to the LabVIEW community specifically so I'm reposting here:
    I'm writing an application which uses the Google Earth Plugin to display events on the globe. Each event is a single point kml placemark with an icon which is a 3kb png file. Placemarks are uploaded to the plugin as they are received by the software. I am experiencing increasing CPU usage with the number of placemarks that are added.
    I have tested displaying a new placemark every second and running until the software running the plugin completely froze (graph attached). The GEPlugin (green trace) stopped responding (i.e. the globe did not respond to the mouse) at around 1200 placemarks added and CPU usage was at ~30%. When the software itself (red trace) froze the plugin was using around 50% CPU and ~3700 placemarks had been added). After the freeze, no new placemarks were added which caused the software to respond (but not the plugin) so I could clear all the placemarks. After the placemarks were cleared from the globe, the CPU usage of the plugin returned to around 5% CPU.
    So what I've seen is that GEPlugin CPU usage increases linearly with each kml placemark added. Is this the expected behaviour/ a normal limitation of the plugin? If not is there a more efficient way of adding many placemarks to the globe?
    I am using GEPlugin version 7.1.1.1580 (API version 1.010) and LabVIEW 12.0f3
    Please see the test results attached. Any input greatly appreciated!
    Original stackoverflow post:
    http://stackoverflow.com/questions/20994323/google-earth-plugin-with-labview-high-cpu-usage-when-add...
    Attachments:
    Performance Log 020114_095115.png ‏82 KB

    Hello,
    I have had a look at your graphs and understood what you are trying to do. To me it seems that as the image gets more complex it gets harde to render which wold likely cause increase in CPU usage resulting in the freeze. I would suggest you try running the program on anoher computer to check on the RAM front of things. If this is a limitation of the GE Plugin then unfortunately I can not do much to help, but if you think this is a problem coming from your LabVIEW code then you can post your code here and I can take a look.

  • Firefox becomes really slow then eventually unresponsive when loading a page with many hires images. Unsual high memory usage up to 2gigs just for firefox. Was never a problem with v3.6.

    When loading a page with many hires images, Firefox becomes really slow and scrolling becomes jumpy then eventually becomes completely unresponsive. Unusual high memory usage of up to 2gigs just for firefox when loading these pages. This was never a problem with v3.6.

    I encountered the same type of problem. Firefox running terribly slowly and slowing down my entire machine (Core i5 with 256GB SSD). Searching the forums, I found a couple of things about troubleshooting performance issues, one of which was to use '''hardware acceleration''', that is on by default. It was turned on on my PC, '''so I tried deactivating it, and it worked!'''
    So doing the exact opposite as Mozilla support said solved the problem. It is really a pain now to work with Firefox. I'm using it because I have no choice, but I'd recommend IE and Chrome over Firefox... Whatever, the market will decide once Firefox has become to crappy...

  • High disk usage/high memory usage.

    i keep getting high memory usage and high disk usage in ps cs6.
    its slow when i open a file. how can i solve this problem.
    thank you.
    philip.

    Not to put too fine a point on it, but more than what?  More RAM is almost always better, but you haven't answered most of the questions posed here.  The answer might be different if you have 2 GB of RAM or 32 GB of RAM already.  A 9 megapixel document could get rather large with a lot of layers, but again you've neglected to give any hard info about its size.
    Regarding your video card, that's a bit of a judgment call you need to make.  For Photoshop CS6 I currently advise people to try to get a video card that gets a score of 1000 or better on this benchmark:  http://www.videocardbenchmark.net/high_end_gpus.html
    Video card speed will matter when you're editing those 3D components and video card VRAM will also matter, but possibly even more importantly your GeForce 320 is a bit old, and nVidia may just not be doing their best driver work for it any more. 
    Everything in general will run more smoothly with a powerful modern video card.  I like to recommend a VisionTek ATI Radeon HD 7750 - or if the computer power supply and your budget allow, the even more powerful 7850.  VisionTek does a very good job with their hardware, IMO, and it comes with a lifetime guarantee. 
    Keep in mind that if you switch from nVidia to ATI or vice versa, you should carefully sweep your system to ensure all files from the old card are removed, then visit the web site of the new card's maker and download/install their latest display driver release.
    Best of luck.
    -Noel

  • High memory usage OSX Lion on iMac

    Hi,
    Recently upgraded 2006 iMac 6.1 to OSX 10.7.2 (4GB). Noticed performance dropped significantly when 2 or more users are logged in especially when switching users. Observed memory usage for OSX Lion is far higher than Snow Leopard! By startup 2GB real memory already allocated and often down to last 500MB. Performance appear to slow down due to swapping as swap i/o appears to increase.
    On snow leopard I had 6 users logged in and 4GB was plenty. Lion appears to be a MS product!!!!
    Anyone else experienced high memory usage on Lion and any ideas how to reduce memory consumption?
    Unfortunately at the maximum memory capacity for my my iMac so need to find ways to reduce memory usage. There must be a kernel compiler option that could reduce memory.....
    Also considering SSD drive to speed up swap i/o read/writes.
    Otherwise will have to go back to leopard :-(
    Thanks for any help in advance.
    -Dav
    PS> OSX Lion is alot more stable than previous OSX releases with this iMac model. Especially iMacs suffering the notorious NVDIDIA GPU heat problems...

    You mac can handle up to 3gb of ram, but slightly more will be available with 4gb installed.  For Lion to run smooth, a true 4gb of ram is preferred, which may explain the sluggishness of your mac.

  • High memory usage on JDBC 10.2.0.1.0 driver on Prepared/Callable Statements

    We are observing high memory usage for each callable/prepared stmt, using 10.2.0.1.0 JDBC Driver. The char[] in oracle/jdbc/driver/T4CVarcharAccessor was alloted 64K to 320K and grows with usage. This problem is worse with 10.1.0.2. driver which was alloted 720K byte of memory for each stmt right at the start.
    We found this by doing a JVM heap dump and analyzing the heap dump using IBM's heap analyser. Here is a snapshot of the heap dump for this object:
    321,240 [216] 11 oracle/jdbc/driver/T4CVarcharAccessor 0x72752968
    - 320,616 [320,616] 0 char[] 0x72761028
    - 216 [216] 0 short[] 0x727527d8
    - 72 [32] 1 java/lang/String 0x727530a0
    - 24 [24] 0 int[] 0x72752938
    - 24 [24] 0 int[] 0x72752948
    - 24 [24] 0 int[] 0x72752958
    - 16 [16] 0 bool[] 0x72752928
    - 16 [16] 0 byte[] 0x727528b0
    - 16 [16] 0 bool[] 0x72752918
    - 10,336 [88] 15 oracle/jdbc/driver/T4CMAREngine 0x712e7128
    - 1,544 [1,032] 79 oracle/jdbc/driver/T4CPreparedStatement 0x72754c58
    It is repeated many times for each prepared/callable stmt call.
    Details of our platform is:
    Database - Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
    JDBC Driver - Oracle Database 10g Release 2 (10.2.0.1.0) JDBC Drivers
    JDK - [Classic VM, Version 1.4.2] from [IBM Corporation]
    Our callable stmts are not using any of the Oracle caching facility. It is a simple call stmt with OUT parameters and the stmt is closed after each execution. However, we implement our own connection pooling and do not close the connection after each stmt.
    Is there a workaround to this? Would appreciate any feedback.

    What is happening is that each new CallableStatement you create allocates a new char[]. I would strongly encourage you to use the implicit statement cache if at all possible. That way instead of creating a new statement each time with a new char[] you will get an already existing statement and reuse the existing char[]. Closing a statement releases the char[] so if you really are closing the statements the char[]s should be GC'd.
    Douglas

  • Since 10.4.6 Update: "ATSServer" with high CPU-usage when opening PDFs

    Since I've updated to 10.4.6 my system is very slow when I open PDFs (in "Preview" or "Acrobat").
    This is caused by the process "ATSServer" which goes through every file in "~/Library/Fonts" (I have over 4.800 files there - but just a view are activated by "FontBook") and so it takes very high CPU-usage.
    I didn't have this problem bevore the update and I didn't make any changes on my font settings.
    I've cleaned the font cache, but it doesn't help.
    Any ideas?
    Ciao
    Mephizo
    PS: Excuse my poor English.
    PowerBook G4 17'' 1.67 GHz   Mac OS X (10.4.6)  
    PowerBook G4 17'' 1.67 GHz   Mac OS X (10.4.6)  

    I haven't noticed any change myself, Dan, but I have the 2 GHz model.
    One thing I HAVE noticed though after OS updates is that they can often result in a fair amount of file and free space fragmentation immediately after installation. OSX's routines will deal with fragmentation of small files , but not of large ones (over 20 Meg), and it won't deal very effectively with free space fragmentation. If your HD is getting full this can cause significant slowdowns, especially where video is involved.
    You should also run DiskUtility and check for any directory and permissions issues.
    Cheers
    Rod

  • Sudden high memory usage, can't find cause

    I did a big update yesterday, and today I've started to notice very high memory usage. I wasn't keeping track before so I can't say how much it increased, but I've never had problems before, and the slowness and lack of responsiveness have been noticeable, though I haven't ruled out other possible causes for that. Here's the output of 'free -m':
    total used free shared buffers cached
    Mem: 7971 7826 144 0 1 149
    -/+ buffers/cache: 7674 296
    Swap: 9215 458 8757
    It wasn't as bad as that right after startup, though usage still seemed suspiciously high. What makes this whole thing a mystery to me is that none of my running processes seem to be using that much memory!  Here's the output of 'top -b -n 1':
    PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
    1 root 20 0 32712 544 384 S 0.0 0.0 0:01.32 systemd
    2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
    3 root 20 0 0 0 0 S 0.0 0.0 0:02.48 ksoftirqd/0
    5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0H
    7 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
    8 root 20 0 0 0 0 S 0.0 0.0 0:15.55 rcu_preempt
    9 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
    10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_sched
    11 root rt 0 0 0 0 S 0.0 0.0 0:00.05 watchdog/0
    12 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/1
    13 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/1
    14 root 20 0 0 0 0 S 0.0 0.0 0:01.02 ksoftirqd/1
    16 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:0H
    17 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/2
    18 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/2
    19 root 20 0 0 0 0 S 0.0 0.0 0:01.17 ksoftirqd/2
    20 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/2:0
    21 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/2:0H
    22 root rt 0 0 0 0 S 0.0 0.0 0:00.04 watchdog/3
    23 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/3
    24 root 20 0 0 0 0 S 0.0 0.0 0:01.04 ksoftirqd/3
    26 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/3:0H
    27 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper
    28 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs
    29 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 netns
    30 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 writeback
    31 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 bioset
    32 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kblockd
    33 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 xenbus_frontend
    35 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khungtaskd
    36 root 20 0 0 0 0 S 0.0 0.0 0:06.75 kswapd0
    37 root 25 5 0 0 0 S 0.0 0.0 0:00.00 ksmd
    38 root 39 19 0 0 0 S 0.0 0.0 0:00.24 khugepaged
    39 root 20 0 0 0 0 S 0.0 0.0 0:00.00 fsnotify_mark
    40 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 crypto
    44 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kthrotld
    47 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 deferwq
    49 root 20 0 0 0 0 S 0.0 0.0 0:00.21 kworker/1:1
    61 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ata_sff
    63 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0
    65 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_1
    68 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_2
    69 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_3
    70 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_4
    71 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_5
    76 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khubd
    81 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kworker/3:2
    93 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 firewire
    94 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_6
    95 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_7
    96 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_8
    97 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_9
    100 root 0 -20 0 0 0 S 0.0 0.0 0:01.31 kworker/0:1H
    104 root 20 0 0 0 0 S 0.0 0.0 0:00.03 jbd2/sda3-8
    105 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit
    119 root 20 0 182720 324 228 S 0.0 0.0 0:02.90 systemd-journal
    130 root 20 0 32032 320 316 S 0.0 0.0 0:00.16 systemd-udevd
    133 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/1:2
    150 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 rpciod
    152 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 nfsiod
    160 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:1H
    162 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/3:1H
    189 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cfg80211
    191 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 led_workqueue
    216 root -51 0 0 0 0 S 0.0 0.0 0:00.00 irq/53-mei_me
    220 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/2:1H
    255 root 20 0 0 0 0 S 0.0 0.0 0:00.59 jbd2/sda2-8
    256 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit
    267 root 20 0 13236 340 260 S 0.0 0.0 0:00.02 crond
    268 root 20 0 57644 524 232 S 0.0 0.0 0:00.07 syslog-ng
    275 root 20 0 77896 2164 52 S 0.0 0.0 0:00.11 cupsd
    276 root 20 0 32856 32 0 S 0.0 0.0 0:00.53 atieventsd
    278 root 20 0 26120 452 448 S 0.0 0.0 0:00.00 systemd-logind
    280 dbus 20 0 18040 1040 484 S 0.0 0.0 0:00.16 dbus-daemon
    293 root 20 0 8156 32 28 S 0.0 0.0 0:00.04 agetty
    294 root 20 0 22416 304 304 S 0.0 0.0 0:00.00 kdm
    311 root 20 0 32332 52 0 S 0.0 0.0 0:00.10 wpa_supplicant
    314 root 20 0 4252 44 28 S 0.0 0.0 0:02.61 acpid
    363 root 20 0 233544 396 396 S 0.0 0.0 0:00.12 colord
    370 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
    371 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
    372 root 20 0 0 0 0 S 0.0 0.0 0:00.00 firegl
    379 root 20 0 8612 60 16 S 0.0 0.0 0:00.00 dhcpcd
    462 redac 20 0 15212 68 0 S 0.0 0.0 0:00.37 gpg-agent
    465 redac 20 0 12680 4 0 S 0.0 0.0 0:00.00 ssh-agent
    504 root 20 0 229584 440 284 S 0.0 0.0 0:00.03 upowerd
    507 polkitd 20 0 506832 916 700 S 0.0 0.0 0:00.09 polkitd
    563 root 20 0 355656 1804 1044 S 0.0 0.0 0:01.50 udisksd
    628 redac 20 0 2397180 17068 2004 S 0.0 0.2 0:04.86 mysqld
    796 rtkit 21 1 168664 372 360 S 0.0 0.0 0:00.34 rtkit-daemon
    873 pdnsd 20 0 172532 0 0 S 0.0 0.0 0:00.00 pdnsd
    874 tor 20 0 49952 20556 2152 S 0.0 0.3 0:05.89 tor
    1884 root 20 0 361452 118644 105076 S 0.0 1.5 1:21.43 X
    1895 root 20 0 75048 660 656 S 0.0 0.0 0:00.00 kdm
    1903 redac 20 0 13736 412 408 S 0.0 0.0 0:00.01 startkde
    1912 redac 20 0 18016 324 320 S 0.0 0.0 0:00.00 dbus-launch
    1913 redac 20 0 19220 1604 564 S 0.0 0.0 0:00.50 dbus-daemon
    1959 redac 20 0 12680 52 48 S 0.0 0.0 0:00.00 ssh-agent
    1976 root 20 0 4080 40 0 S 0.0 0.0 0:00.00 start_kdeinit
    1977 redac 20 0 343772 1976 1420 S 0.0 0.0 0:00.07 kdeinit4
    1978 redac 20 0 348392 2680 1824 S 0.0 0.0 0:00.04 klauncher
    1980 redac 20 0 1262136 5352 3596 S 0.0 0.1 0:00.48 kded4
    1991 redac 20 0 430604 4032 2840 S 0.0 0.0 0:00.11 kglobalaccel
    1995 redac 20 0 694524 3020 2520 S 0.0 0.0 0:00.10 kactivitymanage
    2000 redac 20 0 4216 44 44 S 0.0 0.0 0:00.00 kwrapper4
    2001 redac 20 0 516344 3224 2300 S 0.0 0.0 0:00.10 ksmserver
    2009 redac 20 0 422056 19640 15244 S 0.0 0.2 0:23.69 compiz
    2012 redac 20 0 388168 7692 4544 S 0.0 0.1 0:01.26 emerald
    2023 redac 20 0 280300 2500 2160 S 0.0 0.0 0:00.06 kuiserver
    2025 redac 20 0 154132 1848 1344 S 0.0 0.0 0:00.24 akonadi_control
    2027 redac 20 0 1949412 1984 1592 S 0.0 0.0 0:00.33 akonadiserver
    2059 redac 20 0 346680 1408 1020 S 0.0 0.0 0:00.04 kio_http_cache_
    2062 redac 20 0 769220 4932 3436 S 0.0 0.1 0:01.00 krunner
    2071 redac 20 0 603092 4484 3132 S 0.0 0.1 0:00.16 kmix
    2073 redac 20 0 285208 2680 2352 S 0.0 0.0 0:00.04 nepomukcontroll
    2074 redac 20 0 359260 3148 2864 S 0.0 0.0 0:00.25 gtk-kde4
    2077 redac 20 0 309608 2468 2220 S 0.0 0.0 0:00.05 akonadi_agent_l
    2078 redac 20 0 309512 2332 2140 S 0.0 0.0 0:00.04 akonadi_agent_l
    2079 redac 20 0 309496 2564 2336 S 0.0 0.0 0:00.05 akonadi_agent_l
    2080 redac 20 0 309608 2476 2224 S 0.0 0.0 0:00.05 akonadi_agent_l
    2081 redac 20 0 549804 3236 2480 S 0.0 0.0 0:00.13 akonadi_archive
    2082 redac 20 0 303140 2480 2276 S 0.0 0.0 0:00.04 akonadi_agent_l
    2083 redac 20 0 305600 2516 2300 S 0.0 0.0 0:00.05 akonadi_agent_l
    2084 redac 20 0 314988 4144 3156 S 0.0 0.1 0:00.12 akonadi_imap_re
    2099 redac 20 0 430912 15668 9912 S 0.0 0.2 0:09.39 yakuake
    2100 redac 20 0 309676 2560 2308 S 0.0 0.0 0:00.04 akonadi_agent_l
    2101 redac 20 0 339400 2860 2468 S 0.0 0.0 0:00.09 akonadi_maildis
    2102 redac 20 0 549820 2828 2504 S 0.0 0.0 0:00.13 akonadi_mailfil
    2103 redac 20 0 314052 2924 2508 S 0.0 0.0 0:00.09 akonadi_nepomuk
    2115 redac 20 0 303056 2428 2240 S 0.0 0.0 0:00.04 akonadi_agent_l
    2132 redac 20 0 2011628 14200 5716 S 0.0 0.2 0:18.21 ktorrent
    2158 redac 20 0 15972 836 520 S 0.0 0.0 0:00.00 bash
    2161 redac 20 0 1040928 6484 3060 S 0.0 0.1 0:00.53 knotify4
    2162 redac 20 0 1962616 484928 23072 S 0.0 5.9 2:06.25 firefox
    2176 redac 20 0 13732 344 340 S 0.0 0.0 0:00.00 rssowl
    2178 redac 20 0 11344 404 404 S 0.0 0.0 0:00.00 RSSOwl
    2193 redac 20 0 374420 2764 2516 S 0.0 0.0 0:00.06 polkit-kde-auth
    2195 redac 20 0 3314212 140484 13196 S 0.0 1.7 0:24.29 java
    2203 redac 9 -11 308256 2424 912 S 0.0 0.0 0:00.36 pulseaudio
    2209 redac 20 0 406420 3544 2720 S 0.0 0.0 0:00.08 korgac
    2233 redac 20 0 69156 420 420 S 0.0 0.0 0:00.00 gconf-helper
    2235 redac 20 0 45676 836 564 S 0.0 0.0 0:00.01 gconfd-2
    2236 redac 20 0 438044 4468 3128 S 0.0 0.1 0:00.13 klipper
    2322 redac 20 0 193052 944 740 S 0.0 0.0 0:00.00 gvfsd
    2336 redac 20 0 282112 644 644 S 0.0 0.0 0:00.00 gvfsd-fuse
    2361 redac 20 0 263576 572 572 S 0.0 0.0 0:00.00 at-spi-bus-laun
    2436 redac 20 0 3188512 61188 19352 S 0.0 0.7 0:16.98 plasma-desktop
    2441 redac 20 0 9828 784 520 S 0.0 0.0 0:01.06 ksysguardd
    2832 redac 20 0 15580 1240 784 S 0.0 0.0 0:02.93 top
    2867 redac 20 0 15972 1796 1160 S 0.0 0.0 0:00.03 bash
    2937 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kworker/2:1
    2938 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/3:1
    3336 root 20 0 0 0 0 S 0.0 0.0 0:00.25 kworker/u8:2
    3643 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/u8:1
    3662 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kworker/0:1
    3703 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0
    3704 redac 20 0 15456 1308 992 R 0.0 0.0 0:00.00 top
    32506 root 20 0 0 0 0 S 0.0 0.0 0:00.57 kworker/0:2
    I wouldn't expect the '%MEM's to add up to exactly the real usage, but this isn't even close! So, what could be using up all of my memory? I have /tmp mounted to ram, but that's only a few megabytes. I really have no idea where to go from here.
    The relevant portion of my pacman log is below, since I don't know how to get just a compact list of the updated packages. Most notably, the kernel was upgrades, from 3.9.9-1 to 3.10.3-1.
    [2013-08-03 13:00] [PACMAN] Running 'pacman -Su'
    [2013-08-03 13:00] [PACMAN] starting full system upgrade
    [2013-08-03 13:38] [PACMAN] upgraded a52dec (0.7.4-6 -> 0.7.4-7)
    [2013-08-03 13:38] [PACMAN] upgraded libmariadbclient (5.5.31-1 -> 5.5.32-1)
    [2013-08-03 13:38] [PACMAN] upgraded mariadb-clients (5.5.31-1 -> 5.5.32-1)
    [2013-08-03 13:38] [PACMAN] upgraded mariadb (5.5.31-1 -> 5.5.32-1)
    [2013-08-03 13:38] [PACMAN] upgraded akonadi (1.10.0-2 -> 1.10.2-1)
    [2013-08-03 13:38] [PACMAN] upgraded alsa-plugins (1.0.27-1 -> 1.0.27-2)
    [2013-08-03 13:38] [PACMAN] upgraded alsa-utils (1.0.27.1-2 -> 1.0.27.2-1)
    [2013-08-03 13:38] [PACMAN] upgraded x264 (20130206-1 -> 20130702-2)
    [2013-08-03 13:38] [PACMAN] upgraded ffmpeg (1:1.2.1-1 -> 1:2.0-2)
    [2013-08-03 13:38] [PACMAN] upgraded amarok (2.7.1-2 -> 2.7.1-3)
    [2013-08-03 13:38] [PACMAN] upgraded anki (2.0.11-1 -> 2.0.12-1)
    [2013-08-03 13:38] [PACMAN] upgraded apr (1.4.6-1 -> 1.4.8-1)
    [2013-08-03 13:38] [PACMAN] upgraded glib2 (2.36.3-2 -> 2.36.3-3)
    [2013-08-03 13:38] [ALPM] warning: /usr/lib/avahi/service-types.db installed as /usr/lib/avahi/service-types.db.pacnew
    [2013-08-03 13:38] [PACMAN] upgraded avahi (0.6.31-9 -> 0.6.31-10)
    [2013-08-03 13:38] [PACMAN] upgraded bison (2.7.1-1 -> 3.0-1)
    [2013-08-03 13:38] [ALPM-SCRIPTLET] ---------------- I/O BUG ---------------------------------------
    [2013-08-03 13:38] [ALPM-SCRIPTLET] There's a bug in fglrx found by lano1106 which generates
    [2013-08-03 13:38] [ALPM-SCRIPTLET] great amount of unneeded I/O operations
    [2013-08-03 13:38] [ALPM-SCRIPTLET]
    [2013-08-03 13:38] [ALPM-SCRIPTLET] To activate workaround enable systemd service:
    [2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl enable temp-links-catalyst
    [2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl start temp-links-catalyst
    [2013-08-03 13:38] [ALPM-SCRIPTLET]
    [2013-08-03 13:38] [ALPM-SCRIPTLET] More infos:
    [2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1279977#p1279977
    [2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1280193#p1280193
    [2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-08-03 13:38] [PACMAN] upgraded catalyst-utils (13.6-3 -> 13.8-1)
    [2013-08-03 13:38] [ALPM-SCRIPTLET] + removing fglrx module from /usr/lib/modules/3.9.9-1-ARCH
    [2013-08-03 13:38] [ALPM-SCRIPTLET] Building fglrx module for 3.9.9-1-ARCH kernel ...
    [2013-08-03 13:38] [ALPM-SCRIPTLET] Ok.
    [2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-08-03 13:38] [ALPM-SCRIPTLET] ATTENTION!
    [2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-08-03 13:38] [ALPM-SCRIPTLET] To enable 'automatic re-compilation while system shutdown/reboot'
    [2013-08-03 13:38] [ALPM-SCRIPTLET] testing feature run these commands as root:
    [2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl enable catalyst-hook
    [2013-08-03 13:38] [ALPM-SCRIPTLET] systemctl start catalyst-hook
    [2013-08-03 13:38] [ALPM-SCRIPTLET]
    [2013-08-03 13:38] [ALPM-SCRIPTLET] More info here:
    [2013-08-03 13:38] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1255575#p1255575
    [2013-08-03 13:38] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-08-03 13:38] [PACMAN] upgraded catalyst-hook (13.6-3 -> 13.8-1)
    [2013-08-03 13:38] [PACMAN] upgraded chromaprint (0.7-5 -> 0.7-6)
    [2013-08-03 13:38] [PACMAN] upgraded nspr (4.9.6-1 -> 4.10-2)
    [2013-08-03 13:38] [PACMAN] upgraded nss (3.14.3-3 -> 3.15.1-1)
    [2013-08-03 13:38] [PACMAN] upgraded xdg-utils (1.1.0.git20121008-2 -> 1.1.0.git20130520-1)
    [2013-08-03 13:38] [PACMAN] upgraded libgcrypt (1.5.2-1 -> 1.5.3-1)
    [2013-08-03 13:38] [PACMAN] upgraded libpng (1.6.2-3 -> 1.6.3-1)
    [2013-08-03 13:38] [PACMAN] upgraded xcb-proto (1.8-1 -> 1.8-2)
    [2013-08-03 13:38] [PACMAN] upgraded libxcb (1.9.1-1 -> 1.9.1-2)
    [2013-08-03 13:38] [PACMAN] upgraded libx11 (1.6.0-1 -> 1.6.1-1)
    [2013-08-03 13:38] [PACMAN] upgraded giflib (4.2.1-3 -> 5.0.4-2)
    [2013-08-03 13:38] [PACMAN] upgraded libwebp (0.3.1-2 -> 0.3.1-3)
    [2013-08-03 13:38] [PACMAN] upgraded harfbuzz (0.9.18-1 -> 0.9.19-1)
    [2013-08-03 13:38] [PACMAN] upgraded harfbuzz-icu (0.9.18-1 -> 0.9.19-1)
    [2013-08-03 13:38] [PACMAN] upgraded chromium (28.0.1500.71-1 -> 28.0.1500.95-1)
    [2013-08-03 13:38] [PACMAN] upgraded glew (1.9.0-2 -> 1.10.0-1)
    [2013-08-03 13:38] [PACMAN] upgraded projectm (2.1.0-5 -> 2.1.0-6)
    [2013-08-03 13:39] [PACMAN] upgraded clementine (1.1.1-8 -> 1.1.1-9)
    [2013-08-03 13:39] [PACMAN] upgraded cln (1.3.2-1 -> 1.3.3-1)
    [2013-08-03 13:39] [PACMAN] upgraded gstreamer (1.0.8-1 -> 1.0.9-1)
    [2013-08-03 13:39] [PACMAN] upgraded gst-plugins-base-libs (1.0.8-1 -> 1.0.9-1)
    [2013-08-03 13:39] [PACMAN] upgraded gst-plugins-bad (1.0.8-1 -> 1.0.9-1)
    [2013-08-03 13:39] [PACMAN] upgraded clutter-gst (2.0.4-2 -> 2.0.6-1)
    [2013-08-03 13:39] [PACMAN] upgraded colord (1.0.2-1 -> 1.0.2-2)
    [2013-08-03 13:39] [PACMAN] upgraded cracklib (2.8.22-3 -> 2.9.0-1)
    [2013-08-03 13:39] [PACMAN] upgraded dhcpcd (5.6.8-3 -> 6.0.4-1)
    [2013-08-03 13:39] [PACMAN] upgraded dosfstools (3.0.20-1 -> 3.0.22-1)
    [2013-08-03 13:39] [PACMAN] upgraded lib32-glew (1.9.0-1 -> 1.10.0-1)
    [2013-08-03 13:39] [ALPM] warning: directory permissions differ on /opt/df_linux/
    [2013-08-03 13:39] [PACMAN] upgraded dwarffortress (0.34.11-3 -> 0.34.11-4)
    [2013-08-03 13:39] [PACMAN] upgraded jre7-openjdk-headless (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
    [2013-08-03 13:39] [PACMAN] upgraded jre7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
    [2013-08-03 13:39] [PACMAN] upgraded jdk7-openjdk (7.u40_2.4.1-1 -> 7.u40_2.4.1-2)
    [2013-08-03 13:39] [PACMAN] upgraded eclipse (4.2.2-1 -> 4.3-1)
    [2013-08-03 13:39] [PACMAN] upgraded emacs (24.3-2 -> 24.3-3)
    [2013-08-03 13:39] [PACMAN] upgraded exempi (2.2.0-1 -> 2.2.1-1)
    [2013-08-03 13:39] [PACMAN] upgraded fontforge (20120731_b-3 -> 20120731_b-6)
    [2013-08-03 13:39] [PACMAN] upgraded fuse (2.9.2-3 -> 2.9.3-1)
    [2013-08-03 13:39] [PACMAN] upgraded gegl (0.2.0-8 -> 0.2.0-9)
    [2013-08-03 13:39] [PACMAN] upgraded git (1.8.3.3-1 -> 1.8.3.4-1)
    [2013-08-03 13:39] [PACMAN] upgraded glib (1.2.10-9 -> 1.2.10-10)
    [2013-08-03 13:39] [PACMAN] upgraded glib-perl (1.280-3 -> 1.301-1)
    [2013-08-03 13:39] [PACMAN] upgraded glpk (4.48-1 -> 4.52-1)
    [2013-08-03 13:39] [PACMAN] upgraded gnash-common (0.8.10-9 -> 0.8.10-10)
    [2013-08-03 13:39] [PACMAN] upgraded ibus (1.5.2-2 -> 1.5.3-1)
    [2013-08-03 13:39] [PACMAN] upgraded gnome-settings-daemon (3.8.3-2 -> 3.8.4-1)
    [2013-08-03 13:39] [PACMAN] upgraded libqmi (1.4.0-1 -> 1.4.0-2)
    [2013-08-03 13:39] [PACMAN] upgraded libmbim (1.2.0-1 -> 1.4.0-1)
    [2013-08-03 13:39] [PACMAN] upgraded modemmanager (0.7.991-1 -> 1.0.0-1)
    [2013-08-03 13:39] [PACMAN] upgraded gnome-control-center (3.8.3-1 -> 3.8.4.1-1)
    [2013-08-03 13:39] [PACMAN] upgraded gnome-icon-theme (3.8.2-1 -> 3.8.3-1)
    [2013-08-03 13:39] [PACMAN] upgraded gnutls (3.2.1-1 -> 3.2.3-1)
    [2013-08-03 13:39] [PACMAN] upgraded gnome-vfs (2.24.4-6 -> 2.24.4-7)
    [2013-08-03 13:39] [PACMAN] upgraded goffice (0.10.3-1 -> 0.10.4-1)
    [2013-08-03 13:40] [PACMAN] upgraded gnumeric (1.12.3-1 -> 1.12.4-1)
    [2013-08-03 13:40] [PACMAN] upgraded gst-plugins-base (1.0.8-1 -> 1.0.9-1)
    [2013-08-03 13:40] [PACMAN] upgraded gst-plugins-good (1.0.8-1 -> 1.0.9-1)
    [2013-08-03 13:40] [PACMAN] upgraded gstreamer0.10-ugly (0.10.19-5 -> 0.10.19-6)
    [2013-08-03 13:40] [PACMAN] upgraded gstreamer0.10-ugly-plugins (0.10.19-5 -> 0.10.19-6)
    [2013-08-03 13:40] [ALPM] warning: directory permissions differ on /var/log/hp/
    [2013-08-03 13:40] [PACMAN] upgraded hplip (3.13.6-1 -> 3.13.7-1)
    [2013-08-03 13:40] [PACMAN] upgraded idnkit (1.0-2 -> 1.0-3)
    [2013-08-03 13:40] [PACMAN] upgraded ilmbase (2.0.0-1 -> 2.0.1-1)
    [2013-08-03 13:40] [PACMAN] upgraded imlib2 (1.4.5-4 -> 1.4.5-5)
    [2013-08-03 13:40] [PACMAN] upgraded iso-codes (3.43-1 -> 3.44-1)
    [2013-08-03 13:40] [PACMAN] upgraded openexr (2.0.0-1 -> 2.0.1-1)
    [2013-08-03 13:40] [PACMAN] upgraded media-player-info (17-1 -> 19-1)
    [2013-08-03 13:40] [PACMAN] upgraded qtwebkit (2.3.1-2 -> 2.3.2-1)
    [2013-08-03 13:40] [PACMAN] upgraded kdelibs (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdemultimedia-ffmpegthumbs (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-filesharing (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kdnssd (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kget (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kopete (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-kppp (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-krdc (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kdenetwork-krfb (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:40] [PACMAN] upgraded kid3 (2.3-1 -> 2.3-2)
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-08-03 13:40] [ALPM-SCRIPTLET] lib32-catalyst-utils works with [multilib] repository
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-08-03 13:40] [PACMAN] upgraded lib32-catalyst-utils (13.6-1 -> 13.8-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-libx11 (1.6.0-1 -> 1.6.1-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-giflib (4.2.1-1 -> 5.0.4-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-gnutls (3.2.1-1 -> 3.2.3-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-harfbuzz (0.9.18-1 -> 0.9.19-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-libgcrypt (1.5.2-1 -> 1.5.3-1)
    [2013-08-03 13:40] [PACMAN] upgraded libpciaccess (0.13.1-1 -> 0.13.2-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-libpciaccess (0.13.1-1 -> 0.13.2-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-libpng (1.6.2-1 -> 1.6.3-1)
    [2013-08-03 13:40] [PACMAN] upgraded mesa (9.1.4-5 -> 9.1.6-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-mesa (9.1.4-1 -> 9.1.6-1)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-nspr (4.9.6-1 -> 4.10-2)
    [2013-08-03 13:40] [PACMAN] upgraded lib32-nss (3.14.3-2 -> 3.15.1-1)
    [2013-08-03 13:40] [PACMAN] upgraded libdatrie (0.2.5-1 -> 0.2.6-1)
    [2013-08-03 13:40] [PACMAN] upgraded libgdiplus (2.10-4 -> 2.10.9-1)
    [2013-08-03 13:40] [PACMAN] upgraded libthai (0.1.18-1 -> 0.1.19-1)
    [2013-08-03 13:40] [PACMAN] upgraded libusbx (1.0.15-1 -> 1.0.16-1)
    [2013-08-03 13:40] [PACMAN] upgraded libxfont (1.4.5-1 -> 1.4.6-1)
    [2013-08-03 13:40] [PACMAN] upgraded linux-firmware (20130610-1 -> 20130725-1)
    [2013-08-03 13:40] [PACMAN] upgraded mkinitcpio-busybox (1.20.2-1 -> 1.21.1-2)
    [2013-08-03 13:40] [PACMAN] upgraded mkinitcpio (0.14.0-1 -> 0.15.0-1)
    [2013-08-03 13:40] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-08-03 13:40] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Starting build: 3.10.3-1-ARCH
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [fglrx]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] Building fglrx module for 3.10.3-1-ARCH kernel ...
    [2013-08-03 13:40] [ALPM-SCRIPTLET] Failed!!! Check out log: /var/log/catalyst-install.log
    [2013-08-03 13:40] [ALPM-SCRIPTLET] - /usr/lib/modules/3.9.9-1-ARCH looks like unused, maybe remove it manualy?
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Starting build: 3.10.3-1-ARCH
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] -> Running build hook: [fglrx]
    [2013-08-03 13:40] [ALPM-SCRIPTLET] Building fglrx module for 3.10.3-1-ARCH kernel ...
    [2013-08-03 13:40] [ALPM-SCRIPTLET] Failed!!! Check out log: /var/log/catalyst-install.log
    [2013-08-03 13:40] [ALPM-SCRIPTLET] - /usr/lib/modules/3.9.9-1-ARCH looks like unused, maybe remove it manualy?
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-08-03 13:40] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-08-03 13:40] [PACMAN] upgraded linux (3.9.9-1 -> 3.10.3-1)
    [2013-08-03 13:40] [PACMAN] upgraded linux-docs (3.9.9-1 -> 3.10.3-1)
    [2013-08-03 13:40] [PACMAN] upgraded linux-headers (3.9.9-1 -> 3.10.3-1)
    [2013-08-03 13:40] [PACMAN] upgraded lirc-utils (1:0.9.0-49 -> 1:0.9.0-52)
    [2013-08-03 13:40] [PACMAN] upgraded mediastreamer (2.9.0-1 -> 2.9.0-3)
    [2013-08-03 13:41] [PACMAN] upgraded meld (1.7.3-1 -> 1.7.4-1)
    [2013-08-03 13:41] [PACMAN] upgraded mencoder (36285-1 -> 36285-3)
    [2013-08-03 13:41] [PACMAN] upgraded mercurial (2.6.3-1 -> 2.7-1)
    [2013-08-03 13:41] [PACMAN] upgraded mplayer (36285-1 -> 36285-3)
    [2013-08-03 13:41] [PACMAN] upgraded nepomuk-core (4.10.5-1 -> 4.10.5-2)
    [2013-08-03 13:41] [PACMAN] upgraded netctl (1.1-1 -> 1.2-1)
    [2013-08-03 13:41] [PACMAN] upgraded nfs-utils (1.2.8-8 -> 1.2.8-9)
    [2013-08-03 13:41] [PACMAN] upgraded pcsx2 (1.0.0-5 -> 1.0.0-6)
    [2013-08-03 13:41] [PACMAN] upgraded rosegarden (13.04-1 -> 13.06-1)
    [2013-08-03 13:41] [PACMAN] upgraded soundkonverter (2.0.3-1 -> 2.0.4-1)
    [2013-08-03 13:41] [PACMAN] upgraded subversion (1.8.0-1 -> 1.8.1-1)
    [2013-08-03 13:41] [PACMAN] upgraded syslinux (4.06-2 -> 4.07-1)
    [2013-08-03 13:41] [PACMAN] upgraded telepathy-glib (0.20.2-1 -> 0.20.4-1)
    [2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] recreating all formats...warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://../texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] /usr/bin/fmtutil: line 395: /texconfig/tcfmgr: No such file or directory
    [2013-08-03 13:41] [ALPM-SCRIPTLET] fmtutil: config file `fmtutil.cnf' not found.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] done.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
    [2013-08-03 13:41] [PACMAN] upgraded texlive-bin (2012.0-13 -> 2013.30973-2)
    [2013-08-03 13:41] [ALPM] warning: /etc/texmf/tex/generic/config/language.dat installed as /etc/texmf/tex/generic/config/language.dat.pacnew
    [2013-08-03 13:41] [ALPM] warning: /etc/texmf/tex/generic/config/language.def installed as /etc/texmf/tex/generic/config/language.def.pacnew
    [2013-08-03 13:41] [ALPM] warning: /etc/texmf/dvipdfmx/dvipdfmx.cfg installed as /etc/texmf/dvipdfmx/dvipdfmx.cfg.pacnew
    [2013-08-03 13:41] [ALPM] warning: /etc/texmf/chktex/chktexrc installed as /etc/texmf/chktex/chktexrc.pacnew
    [2013-08-03 13:41] [ALPM] warning: /etc/texmf/web2c/fmtutil.cnf installed as /etc/texmf/web2c/fmtutil.cnf.pacnew
    [2013-08-03 13:41] [ALPM] warning: /etc/texmf/web2c/texmf.cnf installed as /etc/texmf/web2c/texmf.cnf.pacnew
    [2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.4WfV4vnjxi...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
    [2013-08-03 13:41] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
    [2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] updmap: resetting $HOME value (was /home/redac) to root's actual home (/root).
    [2013-08-03 13:41] [ALPM-SCRIPTLET] done.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] >>> texlive: recreating all formats...
    [2013-08-03 13:41] [ALPM-SCRIPTLET] /usr/bin/fmtutil: line 395: /usr/share/texmf/texconfig/tcfmgr: No such file or directory
    [2013-08-03 13:41] [ALPM-SCRIPTLET] fmtutil: config file `fmtutil.cnf' not found.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] done.
    [2013-08-03 13:41] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
    [2013-08-03 13:41] [ALPM-SCRIPTLET] NB: To setup ConTeXt and the lua(la)tex font db,
    [2013-08-03 13:41] [ALPM-SCRIPTLET] see http://wiki.archlinux.org/index.php/TeX_Live
    [2013-08-03 13:41] [PACMAN] upgraded texlive-core (2012.29661-1 -> 2013.30962-2)
    [2013-08-03 13:41] [PACMAN] upgraded transcode (1.1.7-9 -> 1.1.7-10)
    [2013-08-03 13:41] [PACMAN] upgraded twisted (13.0.0-1 -> 13.1.0-1)
    [2013-08-03 13:41] [PACMAN] upgraded videoproto (2.3.1-2 -> 2.3.2-1)
    [2013-08-03 13:41] [PACMAN] upgraded virtuoso-base (6.1.6-2 -> 6.1.7-1)
    [2013-08-03 13:41] [PACMAN] upgraded virtuoso (6.1.6-2 -> 6.1.7-1)
    [2013-08-03 13:41] [PACMAN] installed ffmpeg-compat (1:0.10.8-4)
    [2013-08-03 13:42] [PACMAN] upgraded vlc (2.0.7-2 -> 2.0.8.a-1)
    [2013-08-03 13:42] [PACMAN] upgraded webkitgtk (2.0.3-1 -> 2.0.4-1)
    [2013-08-03 13:42] [PACMAN] upgraded wine (1.6rc5-1 -> 1.7.0-1)
    [2013-08-03 13:42] [PACMAN] upgraded xorg-iceauth (1.0.5-1 -> 1.0.6-1)
    [2013-08-03 13:42] [PACMAN] upgraded youtube-dl (2013.07.17.1-1 -> 2013.07.25.2-1)

    Okay, so it turns out that this was caused by the Catalyst bug described in this post. Reverting to the 13.6 version solved the problem. Lesson learned: if there's a ton of memory being used that isn't owned by a running process, start looking for bug reports involving drivers. Especially drivers known for being, well, pretty bad. Was there any method I could have used that would have told me that Catalyst was using all my ram, or is kernel-space memory usage pretty much a black box?
    Last edited by Chaotechnician (2013-08-08 00:10:43)

Maybe you are looking for

  • Error propagation with ANT

    Hello, I have done a merge with 2 inventories, the first is from my local server with an EAR, the second is from other server (it was charged with a DUMP). The problem is at the propagation moment (by ANT), it throws errors like the following. <11-01

  • IPhone4 recognizes SOME micro sim cards but not all

    I'm new to this forum so please forgive me if this is a subject already covered. I bought an unlocked iphone4 from the online Apple store in Singapore through a friend. I live in Indonesia, where it is not yet released so I had to trim a mini sim int

  • HT4623 On my ipad lastest model w/ios6, should I update to ios7.0,2?

    On my ipad lastest model w/ios6.1.3 should I update to ios7.0,2?

  • PO with mutiple vendors

    Hi, I have a typical scenario wherein the business imports a certain product through a PO having numerous different pricing conditions. This PO has a base price condition payable to the main material vendor and about 8 other conditions currently setu

  • Query That Retrieves New Customers & Leads By Date

    Hello All -- We would like to create a Query that retrieves new customers and leads based on the date (or date range) they are entered into SAP.  Can we create a UDF named STDATE --- Start Date -- and have a Query that allows us to select based on th