High number of BizTalk applications

Are there any concerns to be aware of with having a hundreds (in the range of 300-500) BizTalk applications hosted in a single BizTalk group? From say administration, maintenance or deployment perspective. Appreciate any input.

The more of anything the harder it is to manage.
Is 500 BizTalk Applications a specific problem? No, but it could indicate other 'issues' with how the apps/solutions are organized.
The question to ask yourself, are there really 300-500 separate and distinct apps?
Or, are there groups of apps that function together? If so, you may consider putting those into one Application.

Similar Messages

AP 1130 high number of FCS errors

Hello Mates,
we have a WLC 4402 with 7 access points 1130 running in our office. in the access point statistics 802.11 MAC counters is see i high number of fragments and failures.
Tx Fragment Count          9209812
Tx Failed Count               279133
Multiple Retry Count        174745
ACK Failure Count          1446122
Multicast Rx Frame Count 234598
Tx Frame count               67297291
Multicast Tx Frame Count     137774
Retry Count                    1540676
Frame duplicate count      59843
RTS failure count              94554
Rx Fragment count            0
FCS Error Count               22879679
WEP Undecryptable Count     384
any comment to the numbers ?
cheers
alex

Alex,
I'm working with a client that has a similar issue. They have a 4402 and about 30 APs. The FCS counters on all of the APs are growing at a fast pace (millions a day). I've opened a TAC case to try and determine if the errors I'm seeing are "normal" (within an acceptable range). The impression I have, thus far, is that it is not acceptable. Since the users are not happy with the performance of the applications which rely on the wireless network, we've decided to pursue this further.   They had me dumb down the APs by making a few basic changes to the wlan and that did not reduce the rate of errors. Now they're focusing on transmit levels. The client only uses wireless from some thin clients and TAC wants me to find out what the max. transmit power level is for these thin clients. Wireless is not my cup of tea so I'm not going to try and get into a technical discussion. I'll only pass along what TAC is telling me (as I understand it). The APs can transmit at one of 8 power levels. Each power level is 1/2 the power level of the level above it. For example, PL1 would be 100 milliwatts, PL2 would be 50 milliwatts, PL3 is 25, etc. In any case, suppose that you have a device that has a maximum transmit power level of 30 milliwatts and your APs are set to transmit at 50 milliwatts. What will happen is that as the client devices get further and further out towards the edge of their transmission range, they will still be able to pick up signal from an AP but the AP will no longer be able to pick up signal from the client device. So, the client device will try to send data to the AP but the data will arrive at the AP with errors. In trying to explain this to me, they used voice as an example. They talked about how in wireless environments in which wireless IP phones exist, sometimes the phones will have a transmit level of about 30 milliwatts and what will happen is that users will experience 1-way audio issues because the stronger signal from the WAP will reach the phone but the phone signal will not reach the WAP. So as a phone user starts to roam further from the WAP, the user will still hear the caller on the other end but the caller on the other end will not hear the wireless phone user. As I understand it, the solution to that would be to reduce the transmit power on the APs to be more inline with the maximum transmit power of the lowest common denominator device on the network. The downside to that, though, would be more holes in coverage. You'd probably find yourself in a position where you'd have to deploy more APs to fill in the holes. At least that's the gist I'm getting from the discussion I had with TAC on Friday.   In any case, if we end up doing somethnig that reduces the error rates I'll let you know what we end up doing.
Regards,
Steven

HT1338 My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.

Hi ...
Checked to see how much free space there is on the startup disk lately?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
If disk space is not the issue, booting in Safe Mode deletes system caches that may help.
A Safe Mode boot takes longer then a normal boot so be patient.
Once you see the Desktop, click the Apple menu icon top left corner of the screen.
From the drop down menu click Restart.
See if that makes a difference ...

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

High number of threads and high CPU usage on a single instance

Without any apparent reason, in some moments of day the website reports an increment of the HTTP Queue Length from an average of 10/20 queued requests to 100/200 and more.
In that period of time the Average Response Time increases but the number of the requests on the website don't. Even increasing the instances it doesn't help to resolve the problem (maybe it just reduced it).
It seems that the problem is not related to the traffic on the site. This issue happens either when the traffic is high or low.
The autoscaling works well, we don't have peak of traffic but always a slow increasing of requests and the CPU is always below the 50% (memory too). The issue is resolved by the swap of the site and sometimes it's resolve by itself after a while.
What I discovered when the issue happens, is that there's an instance (just an instance only), that has an high number of threads and CPU usage on the W3WP.exe process and these values are above the mean than the other instances. Eg, instances are around
50/60 threads and 10/20% of CPU, the instance with the problem has 200 threads and 50/60% of CPU. If I kill the W3WP process on that instance the issue is resolved.
I monitored the HTTP requests, I tried the website extension "Diagnostics as service" but I can't discover anything that can help me to understand the problem. Of course, there are many requests that go in timeout but it is a consequences of a
unresponsive instance.
On the web hosting plan there are only two sites: the production site and its staging which is used for update of the production only and it's always sleeping. Plus, no webjobs are running on this site.
What can I do to gather useful information that can help me to understand the reason of this problem?
Thank you!

"Does the instance with the high counts receive more traffic than the other instances? Is it possible that the load balancer not
working the way it should be?"
How can I get that information? I can't see metrics for a specific instance
"Does it always happen to the first instance?"
I will check it better, but in the order given by the Processes panel it's the second instance which has the issue. The scaling is at 2 instances for the most part of the time (it's the minimum).
Maybe one time it was the 3th instance but I'm not sure, I'll give it more attention.
" How long do these moment last?"
The time can be 10 to 30 minutes, but I fix it as soon as I see the problem. It's not the down-scaling to resolve it because in these situations the CPU as well is high so the scaling holds or increases the number of instances.
"- How often do these moments occurs?"
It occurs quite often, 2/4 times a week.

I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution. When I go to share the DVD to disc the form only offers 8pixels at the bottom. How do I burn this DVD in HD with higher number of pixels?

I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution. When I go to share the DVD to disc the form only offers 8pixels at the bottom. How do I burn this DVD in HD with higher number of pixels? I have read other forums on burning HD DVD's but I do not see the option to turn the 8 pi into 40 pi the one forum recommended. I want my DVD to be HD so I may sell these videos online for my business. I can't sell them the low quality they are burning now. Hopefully you can help me. Thanks.

desalvom
Thank you for your reply.
You cannot burn your high resolution video that you can view on your computer to an AVCHD on DVD disc
that will replay through a regular DVD player. But players are marketed under a variety of names with
different support opportunities. One manufacturer may call its product MultiMedia Player, media player, Blu-ray player,
etc.The bottom line is the specifications for each of the players that are candidates for the playback of
the AVCHD format on DVD disc or the format of interest.
If you upload your HD (1920 x 1080) video to YouTube, YouTube converts the video to flash format, but it goes up as the HD video.
But, beware. Look at the YouTube viewing setting when your uploaded video is playing back. The YouTube default is not
HD. It might be 360p, 480p. If you have a 1080p video, then before the YouTube playback, you should be looking
at the video with the YouTube 1080p HD setting for best viewing. That is a YouTube matter.
Best results depend on you
a. setting up the Premiere Elements project preset to match the properties of the source media. That means, if
you have 1080p source, you (manually) or the project (automatically) set the project preset at
NTSC
DSLR
1080p
DSLR [email protected]
or the PAL counterpart, depending on your region need.
b. if you upload your video to YouTube using the Premiere Elements feature, there is a HD preset, but you cannot
customize it.....if you need customization, then you can export your Timeline to a file...in this example
Publish+Share
Computer
AVCHD
with Presets = MP4 H.264 1920 x 1080p30 or PAL counterpart
and then customize the preset under the Advanced Button/Video Tab of that preset. In increase quality, you might look to increase
the Bitrate under Advanced Button/Video Tab settings - without compromising the file size.
Then you would upload that file to YouTube at the YouTube web site.
All of the above are factors that need looking into in order to determine the why for what you wrote
I have published a shortened advertisement video to YouTube- say 5 minutes-
and it is low quality
Often SD video upscaled to HD can present poorly. But, you are dealing with a HD workflow so that should not be introduced into the matter. The setup of the project and
the properties of the source video are important, but let us start with the above and rule in or out those considerations first.
Thank you. As always, any clarification needed, please do not hesitate to ask.
ATR

An error occurred while attempting to install the BizTalk application: Failed extracting CAB files.

Ok I have a BizTalk Application that's called :
FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200
I know that is a long name but why should I be punisched when I create an installer for that. I also have a WebService that exposes this schema. And this webservice is stored inside the MSI cab files. So far so good.
But now when I try to install this MSI alongside all my other MSI's I get the following message :
Failed to extract file "C:\Program Files\Generated by BizTalk\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200\36FAA7B1-99DE-4AF6-A910-ED56D02D84EF\WebDirectory\-FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.WES\App_Data\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.Schemas.FinancieleOpdrachtLogistiekMiddel_v0200.xsd".
(Length=306)
The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters., (NULL), (NULL), (NULL).
If i could install in C:\Program Files\Generated by BizTalk\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200 but the extraction would take place in d:\temp or whatever, I would not have a problem. But unfortunately it extracts in a subdir of an already
very long path......
Is there anybody who knows how to solve this... (can I tell the MSI to use D:\TEMP\ as an extract folder).
And using shorter names is not an option.
Well0549, Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

You can control the destination path of resources in your MSI by modifying them in the Resources folder of a BizTalk application.
%BTAD_InstallDir% defaults to C:\Program Files\Generated by BizTalk\... etc etc. You can put in whatever you like here.
You can get more granular control over the resources by using the
BTSTask.exe tool.
If you can tell me how to make the extract process of he cabs point to c:\temp i will be happy to use BTSTASK (wich i am already doing). But the problem is with the extraction oft he web service. It will extract to :
C:\Program Files\Generated by BizTalk\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200\36FAA7B1-99DE-4AF6-A910-ED56D02D84EF\WebDirectory\-FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.WES\App_Data\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.Schemas.FinancieleOpdrachtLogistiekMiddel_v0200.xsd
Wich is just to long. I want the cabs to extract to c:\temp or something like that.....
Well0549, Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

How to find number of Real Applications users available in SAP R/3 system.?

Hello Experts,
How to check the Number of Real application users available in R/3 system (except system , communication users and Admin users)
Is there any TCODE to check this..
Please let me know how to do.
Regards,
Ravi Maddela

Hello ,
Thnx for the Immediate response
But Al08 or Sm04 will show only active users
I want all Real application users available in the R/3 system.
When I check few users may not login.
I want all the users available even though they were not logged in
Regards,
Ravi Maddela

What types of problems stem from high number of loaded classes?

Currently we are in the process of testing our code for long-ish periods of time, between 4 hours and 24 hours+ non stop. The code is not interactive/user based. I first noticed that our garbage collection times were very high (about 15-25% of our total processing time). I then looked at loaded classes and there is a pretty steady rise over team of loaded classes. At the time of start up it is around 6-7k. After appproximately 4 hours its up around 25k loaded classes. Only 35 or so classes have been unloaded over this time. I'm wondering if the high number of loaded classes occurs because objects aren't fully dereferenced but then when a new object is created it reloads the class. My knowledge of class loading is fairly limited. Any help would be appreciated. Also, if you need more info let me know.
Heap Size: ~2GB
CMSPermGenSweepingEnabled
CMSClassUnloadingEnabled

Take a look at this example and the output:
public class Example {
      * @param args
     public static void main(String[] args) {
          StaticBlocks a = new StaticBlocks();
          StaticBlocks b = new StaticBlocks();
          a = new StaticBlocks();
class StaticBlocks {
     static {
          System.out.println("A static init block. Only happens when class is first loaded.");
          System.out.println("\tInstance init block. Happens every time a class is instantiated.");
     StaticBlocks(){
          System.out.println("\tYou instantiated a class!");
}Output:
A static init block. Only happens when class is first loaded.
     Instance init block. Happens every time a class is instantiated.
     You instantiated a class!
     Instance init block. Happens every time a class is instantiated.
     You instantiated a class!
     Instance init block. Happens every time a class is instantiated.
     You instantiated a class!I'm really not sure where to go from here... hopefully someone else that knows the JVM better can provide some insight.
Take a look at this link. It gives some details on class loading... might help you out a little.
[http://onjava.com/pub/a/onjava/2005/01/26/classloading.html?page=1|http://onjava.com/pub/a/onjava/2005/01/26/classloading.html?page=1]
Edited by: mikeyfreake on Jul 29, 2009 9:40 AM

'The argument ' 0.000 V' cannot be interpreted as a number' when assigning application structure, line 805, contents "20140611NB F000000004500098898102E202USD 000..."

Hi All,
Data loading of 2LIS_02_SCL and 2LIS_02_ITM is getting failed by throwing an error
'The argument ' 0.000 V' cannot be interpreted as a number' when assigning
application structure, line 805, contents "20140611NB
F000000004500098898102E202USD 000..."
Here Data is not even loading to PSA so I cannot edit the data in PSA.The process chain is getting failed at Load step it self.
I have even checked the ECC for the particular PO mentioned In the error message but i could not found any issue in ECC

Hi There,
Does anyone know the root cause of it? We are facing the same issue.
Please keep in mind, IT`s NOT PC FILE DATASOURCE. It`s standard 2LIS_02_ITM extractor.
Thanks in advance.

UPGRADING WITH A PERFECT BATTERY BUT WITH HIGHER NUMBER OF CELLS

i m using HP PAVILION DV5 1104-TU ENTERTAINMENT NOTEBOOK PC since 4years, recently its motherboard got crashed so after a wrong reply ,finally i got the motherboard from ebay which was perfectly apposite for my model,now its battery is not giving backup so i wanna buy a new battery but with 12cells or even more for extra backup, my battery's part no is 484170-001,my laptop screen is 15.4", 2gb ram,intel core 2duo, i wanna buy it from ebay but please provide the right battery which will fit with ease, as in my earlier post for motherboard the first reply was for a wrong motherboard as they s, do provide some ebay links for the higher number of cells if possible plus if i get to know about hours of backup

Yes, it will sit a little higher in the back due to the thicker battery. This will not harm the notebook. Generally speaking, an extended cell battery will cost significantly more than a standard battery. Think of the extended cell battery as a V8 and the standard battery as V4. The V8 is bigger and costs more than the V4. The one I linked to on eBay was about half of what the battery is from HP directly. Anthony82 provided a battery as well, but it's a non-OEM battery which typically means it's not an actual HP battery (think third party). LIke the one Anthony82 provided, I don't see any indication that the battery in the expert's link is a genuine HP battery. This might account for why is is significantly less as I don't see how a genuine HP battery can cost $20-$35 USD as I would imagine it costs more than that to make it.
To answer your question, the one the expert gave you does mention your specific notebook model. If it doesn't work, then that falls on the eBay seller.
You have many options to choose from, so choose the one that you are most comfortable with. If you want to look for a genuine HP part, you can look for HP part number KS526AA.
Let me know if this answered your question.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

High number of "The connection has timed out" errors. Where do I set the time out period (variable and file name) - windows 7

I usually use a wireless network at home and have very few time out problems with Firefox.
I am travelling and using Optus Wireless broadband where the average ping to a site is 700+ms .
I suspect that this is the cause of the high number of timeouts I am experiencing.
Optus say there are no problems so I think I will have to set the timeout to a longer period.
Please advise what variable name/s (and in which file) the timeout is set for LOADING PAGES.
Thanks in anticipation.
Greg Atkinson.
By the way the same is happening in IE8
and on many sites other than the Yahoo one below.
================Full Error Page ==============
URL is http://au.mg4.mail.yahoo.com/dc/launch?.gx=1&.rand=81jkv757qfdqt
=========================================
The connection has timed out
The server at au.mg4.mail.yahoo.com is taking too long to respond.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Having the same problem 4 out of 5 times I try to navigate to a new site I get the error "connection has timed out".
My I phone works fine on the same wireless connection so it must be something to do with the computer. The problem occurs on IE, firefox, and google chrome.
I too would like to know how to how to either fix this problem or failing that to extend the length of time before the connection times out (which is currently only about 5 seconds).
Please help!
Thanks in advance

What is the biggest stopper in the BizTalk application testing?

To me the biggest stopper is the work with the test endpoints.
Let me explain. To test BTS applicaion in isolation we have to create new test ports (or modify existed ports which is the unlikely approach of course). After tests we have to remove them. BizTalk does not provide us tooling to do this.
BizUnit does not solve this problem at all.
The one-way port replacement is simple. Usually the File test ports are good enough.
For the two-way port replacement is complex. Especially for the two-way send ports.
If ports are bind to the orchestrations, the problem is even more complex. We have to rebind ports to test ports and back.
So as result I cannot easily and fast enough create the continuous integration for BTS application. It usually evolve in a special project with unconventional parts.
What is the biggest stopper in the BizTalk application testing for you, guys?
Leonid Ganeline [BizTalk MVP] <a href="http://social.technet.microsoft.com/wiki/contents/articles/20258.biztalk-integration-development-architecture.aspx">BizTalk Development Architecture</a>

For BTS application testing in isolation, I use multiple binding files. yes, I need to apply/reapply this different binding files for smoke testing /isolated testing and another binding for integrated testing. Its painful but helps.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Is there any way to include the BizTalk Application Description after exporting the MSI?

Anything I put in my biztalk app Description field(see first image), it shows up in the Comments attribute of the exported MSI file. But if I edit the
Comment attribute(see second image) and then import the MSI file, the edited comment does not reflect in the BizTalk app description. How can I push that description from MSI file?

You can’t set the comment/Description property of the msi from the msi file. MSI is read-only, any changes doesn’t affect the conent of the msi. An
installer package is "compiled" by reading the instructions from the database and created as the .msi file.
When you export an application as msi, its details are retrieved from
BizTalkMgmtDb. In the case of description of the BizTalk application, it is retrieved from the
nvcDescription
column of the bts_application table.
select nvcName,nvcDescription from dbo.bts_application
Once msi has been exported it’s a complied package, any changes to the msi file are not updated to the content of the file. Same way when you import an msi into BizTalk, it actually create relavant
entries into the BizTalk databases.
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Maximum number of developer application on my phone reached

Hi , i am developing an app in c# for windows phone , i run my code in my phone , after two app that i run in my phone , it shows me error :
Unable to install application. The maximum number of developer applications on this phone has been reached. Please uninstall a developer application and try again.
how can i uninstall a developer app in my phone ??
tnx

Hi,you can uninstall
a developer or any app from your phone do following steps,
1)Go In the App
list, tap and hold an app or game, then you tap Uninstall.
2)When asked for confirmation,tap
Yes,to uninstall app.
Don't
forget to mark the right answer and vote up if helps you.

High number of BizTalk applications

Similar Messages

Maybe you are looking for