High paging in Windows 2003 server - Oracle 10.2.0.4

Hi ,
SAP instance running on Windows 2003 server , DB-oracle 10.2.0.4.
Currently we have 16 GB of physical memory and 12 gb of virtual memory set in the system.As the sap system is started immediately the paging goes high to 25 gb used.
Checked market place and found this note
Note 1009297 and implemented the windows patches given in the note ,still the issue exists.Please help to resolve the issue.
SAP system:Solution managaer 7.0
Oracle:10.2.0.4
OS:Windows 2003 server 64-bit machine. service pack 2
Basis-Team .

have a look at note 1518419 because in meantime the reality is a little more complex.
note 88416 is still valid, but only if there is only one system on the box and if your pagefiles has 2-3 times the size of the physical ram of the box (which is litte too much if the box has 250 GB of it).
The reason why the system is using pagefile directly after startup is following:
SAP configures large portions of memory for caches and transaction memory for the users connecting to the system.
This amount is allocated during the startup of the system. Only some parts (so called privat memory) is allocated on demand.
This is the reason why the system needs so much virtual memory after being started up. How much - see note 1518419.
regards
Peter

Similar Messages

Netweaver 2004S installation on Windows 2003 server : Oracle 10g Problem

Hi Friends,
I am installing the SAP Netweaver 2004s on a server which has Windows 2003 server Operating system on it.
It has got 6GB RAM and has, 5gb of free space in C drive, H: drive has 70 gb and I: drive has 50 GB of free space in it.
I am running Pre_requiste checker tool to check my hardware & software requirements in order to go ahead with installation, as a part of SAPInst.exe execution.
The results of Prerequisite checker tool are satisfied except for one " SWAP SPACE VALUES"
I am getting the message as follows
"The Minimum SWAP SPACE values required is 10994MB and currently you have 5993MB"
How to increase this SWAP space value? Please let me know the procedure.
Currently my server has a paging file details as below : Min size : 2MB & Max size : 9214MB allocated on C: drive. No other drive has paging file allocation.
What effect will I have if i proceed without meeting this requirement??
Suitable answers will be rewarded.
Thanks
Diwakar

OPen windows explorer and right click my computer
Select Properties
Click Advanced Tab
Click Settings (performance)
Select Advanced Tab
In virtual memory - click change.
Increase swap space/page file here.

Connect linux 4 oracle 10g client to window 2003 server oracle 10g server

Hi,
I have my oracle 10g server installed on windows 2003 server.
On another system i have oracle 10g client is installed having RedHad enterprise edition 4.
I want to connect my client to the database server.
I check using oracle universal installer it shows in installed products i.e.
oracle 10g client is installed on linex system.
but when i try to write any command like
[oracle@satish ~]$ sqlplus$
bash: sqlplus$: command not found
[oracle@satish ~]$ tnsping
bash: tnsping: command not foundand it doen't show any enty in applications for oracle which is strange.
as i am new to linux.
how to overcome this problem.
Thanks
Umesh

thanks for quick reply
i work like
[oracle@satish ~]$ cd /home/oracle/oracle/product/10.2.0/client_1
[oracle@satish client_1]$ ./tnsping
bash: ./tnsping: No such file or directory
[oracle@satish client_1]$ ./sqlplus /nolog
bash: ./sqlplus: is a directory
[oracle@satish client_1]$ ls
assistants   has               jdbc     nls          oui       root.sh      wwg
bin          hs                jdk      odbc         owm       root.sh.old xdk
cdata        install           jlib     olap         perl      slax
cfgtoollogs install.platform jpub     OPatch       plsql     sqlj
classes      instantclient     jre      opmn         precomp   sqlplus
crs          inventory         ldap     oracore      racg      srvm
css          jar               lib      oraInst.loc rdbms     sysman
diagnostics javavm            network ord          relnotes uix
[oracle@satish client_1]$
and
[oracle@satish ~]$ expot ORACLE_HOME=/home/oracle/oracle
bash: expot: command not found
[oracle@satish ~]$ expoRt ORACLE_HOME=/home/oracle/oracle
bash: expoRt: command not found
[oracle@satish ~]$ export ORACLE_HOME=/home/oracle/oracle
[oracle@satish ~]$ export ORACLE_SID=neo
[oracle@satish ~]$ export PATH=$PATH:/home/oracle/oracle/product/10.2.0/client_1[oracle@satish ~]$
[oracle@satish ~]$ ./sqlplus /nolog
bash: ./sqlplus: No such file or directory
[oracle@satish ~]$ ./tnsping
bash: ./tnsping: No such file or directory
[oracle@satish ~]$thanks
Edited by: Umesh Sharma on Feb 20, 2009 6:33 AM

Trex can't be updated to higher levels on windows 2003 server 64 bit

Hi gurus,
We have a portal system (EP 7.0 SP18) and a Trex 7.0 server which are
working on windows 2003 server 64 bit on the same server.
After upgrading our portal system from sp15 to sp18, we can not see
indexes on Index Administration screen. When we tried to create the
indexes from the beginning, we faced the message "An index with the samename already exists."
We thought that the level of the Trex server(25) is low which may cause
this problem and decided to update the Trex server to level 46. We
downloaded "TREX70_46-20001842.SAR TREX 7.0 REV 46" from
service.sap.com and tried to update Trex server according to
NW70_SPSTACK_GUIDE_SPS18.pdf.During the installation a warning
message "You started an installation of sofware for platform
i386, but SAPinst is running on platform AMD64" was given. When we
continued the installation, an error message
was shown in a message box."Running msiexec.exe failed with return code
1603:Fatal error during installation. Commandline was
msiexec.exe/norestart/L sapmmcx86u.log/i sapmmcx86u.msi/qn" I searched
the sapmmcx86u.log and the error message says that this installation
package is not for windows
2003 server 64 bit.
"This installation does not support 64 Bit Windows Operating systems.
Please use the corresponding 64 Bit installation package.
Action ended 8:26:08: LaunchConditions. Return value 3.
Action ended 8:26:08: INSTALL. Return value 3.
MSI (s) (10:84) [08:26:08:578]: Product: SAP MMC SnapIn -- Installation
failed."
We searched in OSS notes and found the note "Note 1021003 - TREX 7.00 -
Update Windows 2003 64-Bit installed from DVD"
.We did the things in the note but unfortunately nothing changed.
We tried the install revision 45,44 etc but we got the same warning and
error messages.
Any suggestions?
Edited by: Tolga Akinci on Apr 30, 2009 3:08 PM

Hi Tolga,
You face with this error, because of Trex installation package is trying to install native i386 redistributables (vcredist_x86.msi) during the process. In order to patch Trex system on x64 architecture, follow the instructions, below;
1) Start sapinst, under your <TREX_PATCH> path
2) Ignore AMD64 warning popup
3) When popup appears on the "1603:Fatal error during installation." error, change temp folders on both environment variables, on my computer
4) Download and execute "vcredist_x64.exe" then run installer
5) After respective installation click on "Retry" button on error popup
At the end of this operation, your Trex patch will be succeeded. Please do not forget to undo your temp directory settings, on your Trex host. I hope that it is clarify your question.
Best regards,
Orkun Gedik
Senior SAP Development And Basis Consultant

Oracle 10G slow Performance on Windows 2003 Server

Hi there,
Looking for a little assistance in locating a bottleneck that's started to hit our system this week. It's really odd because it's been starting around 10am every morning this week.
today is the worst that I've seen it because it's almost brought the system to a halt.....
We're running Oracle 10.2.0.1 64b on Windows 2003 Server 64
The server has 16 processors and 64GB of RAM currently the CPU is sitting at 5% and the RAM usage is at 16.4GB
It's a blade server with a SAN backend and I'm assuming the latency is coming from the disk but I need to determine this for a fact.
I've only been a DBA for about a year and I'm stilling learing how to locate and identify issues. According to OEM I'm seeing
a ton of I/O from the users. So anyways, any help or insight would be much appreciated and a learning experience for me.
Thank you for your time and asistance.
SB

Thank you for the reply!
We've had finding one FOREVER, I can't resolve it and I've read somewhere to ignore because OEM is false reporting. I'm adjusting DB_Cache now...
Isn't possible that too much cache could be bad for the system and cause slow downs?
FINDING 1: 100% impact (29725 seconds)
Significant virtual memory paging was detected on the host operating system.
   RECOMMENDATION 1: Host Configuration, 100% benefit (29725 seconds)
      ACTION: Host operating system was experiencing significant paging but no
         particular root cause could be detected. Investigate processes that
         do not belong to this instance running on the host that are consuming
         significant amount of virtual memory. Also consider adding more
         physical memory to the host.
   RECOMMENDATION 2: DB Configuration, 100% benefit (29725 seconds)
      ACTION: Consider enabling Automatic Shared Memory Management by setting
         the parameter "sga_target" to control the amount of SGA consumed by
         this instance.
FINDING 2: 51% impact (15210 seconds)
The buffer cache was undersized causing significant additional read I/O.
   RECOMMENDATION 1: DB Configuration, 9% benefit (2685 seconds)
      ACTION: Increase the buffer cache size by setting the value of parameter
         "db_cache_size" to 7568 M.
   ADDITIONAL INFORMATION:
      The value of parameter "db_cache_size" was "6912 M" during the analysis
      period.
   SYMPTOMS THAT LED TO THE FINDING:
      SYMPTOM: Wait class "User I/O" was consuming significant database time.
               (84% impact [25073 seconds])

Problem Oracle 10g database Installation on Windows 2003 Server

Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

Whether Oracle 8.1.6 Supports Windows 2003 Server/Windows 2000 Adv. Server

Dear All,
Whether Oracle 8.1.6 Supports Windows 2003 Server/Windows 2000 Adv. Server.
I tried it in windows 2003 server but i couldn't. Atlease tell me wheather it support windows 2000 adv. server. This is my first dba job.
Under Doc ID: 66397.1 saying Oracle 8.1.6 Not Support Windows NT Server 4.0 Terminal Server Edition.
Under Doc ID: 77627.1 saying Oracle 8.1.6 Supports Windows 2000 Support.
Please help me out urgently.

Since you have access to Metalink, you could be looking at the Certify tab to find this information. But, the answer is that 8.1.6 is no longer supported by Oracle. However, you should be able to install it on Win 2000 advanced server. You just can't get any support for it.
The earliest version of db supported on Win 2003 was either 9.0 or 9.2, but 9.0 is desupported now as well.

Install oracle E-business suite on windows 2003 server

hi ,
i am trying to install oracle EBS on windows 2003 server enterprise edition , i have installed these prerequisites :
1 - MKS Toolkit version 7.0
2 - JDK 1.3.9
3 - Visual C++ 2005 express edition
while checking the system with the startup disk , it is giving me an error :
system utilities check : - check system for make , id , ar , and cc
system utilities check : command : cmd.exe/c D:\rapidwiz\bin\checkutil.cmd C:\program files\mkstoolkit C:\program files\microsoft visual studio 8\VC
D:\rapidwiz>echo off
'which' command is not available. Check MKS installation
ERRORCODE=1 ERRORCODE_END
Error- System Utilities Availability test has returned an error: 1
anybody can help please
Regards,
Chady

What is the application release you are trying to install? Please note that 11.5.10.2 RapidWiz automatically installs JDK 1.4.2 on the Solaris, Linux, and Windows operating systems.
system utilities check : - check system for make , id , ar , and cc
system utilities check : command : cmd.exe/c D:\rapidwiz\bin\checkutil.cmd C:\program files\mkstoolkit C:\program files\microsoft visual studio 8\VCInstall all pre-req. software (i.e. Visual C++, MSK, Gnumake, ..etc) in directories which contain no space in name (i.e. C:\VC, C:\MKS, ..etc. Do NOT install it under C:\Program Files). Also, when RapidWiz prompt to enter MSK directory, type "C:\MKS\mksnt".

Oracle 10g install on Windows 2003 Server 32-bit

As far as I can tell there doesn't appear to be an Oracle10g download for 10.2.0.4 for Windows 2003 Server. It looks like you have to download 10.2.0.1 for Windows then apply the patch to bring it up to 10.2.0.4. Am I seeing this correctly or am I missing something?
Thanks!

>
As far as I can tell there doesn't appear to be an Oracle10g download for
10.2.0.4 for Windows 2003 Server. It looks like you have to download 10.2.0.1
for Windows then apply the patch to bring it up to 10.2.0.4.
Am I seeing this correctly or am I missing something?
>
Indeed you are; your eyes are definitely not lying to you. 10.2.0.4 is a patchset which can only be applied to an already existing Oracle Home.
You might want to try and understand a little bit more about what the 10.2.0.4 means by accessing the links below.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#sthref14
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/dba.htm#sthref94
http://wiki.oracle.com/page/Patchset+Number+Overview
Perhaps you also ought to go through this {message:id=3251402}
Regards,
Phiri

Installing Oracle 10.1.0.2.0 (32 bit) on windows 2003 server

Hi all,
During installation of Oracle 10.1.0.2.0 (32 bit) on windows 2003 server 64 bit standard edition there is failure in Oracle Net configuration , oracle Data Base configuration Assistance.
and i saw the log file of the installtion but its very complex and saying some Unexpected error occured and showing some coding. any suggestions about this. thanks in advance.
BEST REGARDS
Edited by: user11153253 on Jan 10, 2011 11:57 PM

user11153253 wrote:
Hi all,
During installation of Oracle 10.1.0.2.0 (32 bit) on windows 2003 server 64 bit standard edition there is failure in Oracle Net configuration , oracle Data Base configuration Assistance.
and i saw the log file of the installtion but its very complex and saying some Unexpected error occured and showing some coding. any suggestions about this. thanks in advance.
BEST REGARDS
Edited by: user11153253 on Jan 10, 2011 11:57 PMYes, I would suggest you actually show us the error message. All of our crystal balls are out for repair at this time.
"My car won't start. It makes funny sounds when I try. I looked under the hood and saw a lot of complex machinery. Any suggestions on how to start my car?"

EP 6.0 on Oracle 9i 32 bit for Windows 2003 server x86_64 bit env Install

We are facing issues while performing instalations of EPortal 6.0 on Windows 2003 enterprise edition server(X64 version) on AMD 64 bit processor.We have installed 32 bit Oracle software alongwith 32 bit SAP kernel 640 dumps
We had to install oracle 9.2.0.5 32 bit ,since there is no oracle
realease for oracle 9i 64 bit ,on OS windows 2003 server X_86 64 bit,after doing this when we go ahead kenel 32 bit, we faced error during database creation phase of the NW java installation.The error logs are
as follows,
ERROR 2008-04-05 23:09:27
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message:
ORA-12546: TNS:permission denied
plz respond asap

hi sm,
this seems to be an issue with the rights of the user and the DB install. check is the TNS is up and running and that the SIDADM has fill access to it. Also , have you checked the latest PAM. why are you trying to implement EP6 right now? I would suggest to go for EP7.0
regards,
Shantanu

Oracle 9i 32 bit ON Windows 2003 server 32 bit

Hi all
I have oracle 9i 32 bit istalled on HP server with windows 2003 server 32 bit, 8GB ram.
I am trying to increase oracle memory size (SGA + PGA),
but when I exceed 2GB for (SGA + PGA) it gives me error (ORA-27102 : out of memory)
Is it because the windows 32bit ?
How to manage this issue?

The maximum amount of memory that can be allocated on a Windows Server 2003 is 4 Gb.
If you have Windows Server 2003 Enterprise Edition, it supports 32 GB of physical RAM and Windows Server 2003 Datacenter Edition supports 64 Gb by means of the Physical Address Extensions (PAE) feature.
You should declare the 3 Gb switch that is in the Boot.ini file with Microsoft Windows Server 2003 so it addresses more than 2Gb. So verify which windows 2003 server edition are you currently using.
~ Madrid
http://hrivera99.blogspot.com

Oracle 9i on Windows 2003 server - DBCA error

1. This is the error message that I get when I am trying to install the 9.2.0.3 software in a new oracle home. There is a 10g database which sits in a different Oracle home. The OUI runs smoothly until it comes to the point where the Database Config Assistant tool starts running and then I get this error and the installer hangs. Could anyone let me know why I might be getting this error.
java.lang.UnsatisfiedLinkError: initializeCluster
     at oracle.ops.mgmt.nativesystem.WindowsSystem.initializeCluster(WindowsSystem.java:390)
     at oracle.ops.mgmt.cluster.GetActiveNodes.initializeCluster(GetActiveNodes.java:260)
     at oracle.ops.mgmt.cluster.GetActiveNodes$ClusterWareThread.<init>(Compiled Code)
     at oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:139)
     at oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:158)
     at
     at oracle.sysman.assistants.dbca.backend.Verifier.isRawFeasible(Compiled Code)
     at oracle.sysman.assistants.dbca.backend.Verifier.processRawConfigFile(Compiled Code)
     at oracle.sysman.assistants.dbca.ui.ProgressOnlyHost.performOperation(ProgressOnlyHost.java:138)
     at oracle.sysman.assistants.dbca.backend.Host.startOperation(Host.java:2171)
     at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:99)
     at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:161)
Agent Config Asst
Parameter "orahome" = C:\Oracle\product\ora92
Parameter "nodeinfo" = NO_VALUE
java.lang.UnsatisfiedLinkError: initializeCluster
     at oracle.ops.mgmt.nativesystem.WindowsSystem.initializeCluster(WindowsSystem.java:390)
     at oracle.ops.mgmt.cluster.GetActiveNodes.initializeCluster(GetActiveNodes.java:260)
     at oracle.ops.mgmt.cluster.GetActiveNodes$ClusterWareThread.<init>(Compiled Code)
     at oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:139)
     at oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:158)
     at oracle.agent.AgentCA.configureOPS(AgentCA.java:74)
     at oracle.agent.AgentCA.main(AgentCA.java:39)
Exception in thread "main"
FYI - I have installed the OUI patch Oracle Universal Installer release 2.2.0.18.0 for Windows and the Oracle9i Database Release 2 (9.2.0.3.0) Patch Set for Windows after I installed the 9.2.0.1 database software.
I then tried to run the DBCA tool from the 'Start > Programs>Oracle 9ihome>' menu to create the new Oracle 9.2.0.3 database but the DBCA assistant would not start up.
2. I have a related question:
Has anybody performed a downgrade of Oracle 10g database to Oracle 9.2.0.3 database using export/import?
Can you perform a full database export of the Oracle 10g database using the 9.2.0.3 export utility and then perform a full database import into Oracle 10g? I have read some documentation that states this is not possible. Can anyone verify or confirm how they did this migration? So is the only option then to perform a table or user level export?
Also, if both the databases reside on the same Windows 2003 server box, how can you ensure that the source database files are not overwritten?
Any help would be appreciated.
Thanks,
Vishal.

It only happens when you have oracle 10g and Oracle 9i on the same machine.
You can run 9i dbca successfully, if you rename the 10g "orasrvm.DLL" found in any 10g BIN directory. Rename it back after you are 9i dbca is complete.
Please complete details for this issue see
http://orafaq.net/maillist/oracle-l/2004/10/08/0335.htm
Thanks
Ravisayal

Install oracle database 9i on windows 2003 server

I have installed a oracle 11g on windows 2003 server, but yo want install oracle 9i same machine, I can?
exist any problem? i think that not possible

859811 wrote:
I have installed a oracle 11g on windows 2003 server, but yo want install oracle 9i same machine, I can?
exist any problem? i think that not possibleOracle V9 was obsoleted & de-supported before Windows 2003 was ever released.
It may work or it may not work.
In any case you are solely responsible for the results.

Install Oracle 10g on Windows 2003 Server cluster (MSCS)

Hi all
How do I install Oracle 10g on Windows 2000 cluster (MSCS installed)?
I have a 2-nodes Microsoft windows 2003 server cluster and I want to install Oracle 10g,
Do I folloow this order:
1. Install the software on both without the database
2. Create the database from the first node
in this case, The second node can see the database as it is available?,
and what about the IP adresses?
If you can point me to some documentation, or help in any way, I would appreciate it.
Thanks for any help.

Read here...
http://download.oracle.com/docs/html/A96685_01/intro.htm
>>
Oracle Fail Safe comprises multiple components: Oracle Fail Safe Manager, Oracle Services for MSCS, and server components specific to Oracle Fail Safe.
>>
So I don't know how you can achieve this without Fail Safe.
There might be other link which I cannot find right now.

High paging in Windows 2003 server - Oracle 10.2.0.4

Similar Messages

Maybe you are looking for