High pitched noise when recording w/ M-Audio Producer USB Microphone

hello,
I have an M-Audio Producer USB Microphone. Recording with GarageBand, nothing else connected, using an the Apple AC power cord (three pronged ground).
When I record with it plugged into the USB port closest to my FireWire port there is a constant high pitched noise.
When I record with it plugged into the USB port furthest from the FireWire port there is no noise at all (as it should be).
What's wrong with my USB port closest to the FireWire?

I am having major problems with iMovie (and iDVD) ever since I upgraded to OS.X.10.5.6. I had to scrap my last promo-video. I am now recreating it very gingerly saving as I go but I am now stuck again. I am getting the digital audio screeching under my video clips when I extract the audio and under insert titles and transitions. Does this describe your 'crickets'?
I have clean video and audio signal from my camcorder. Check your cam' playback to verify. After three attempts I do have clean material in iMovie but cannot proceed until I resolve this issue. I ruined my last video when I extracted the audio and ended up with a garbled rumble which I could not reverse.
I have another question elsewhere regarding burning to DVD but I now need to resolve this before I can get to test the recommendations in the reply.
I hope I have helped focus your symptoms. I also hope there is an answer out there for this issue.
BTW, Canon ZR-60 Firewire
Cheers,
Denny

Similar Messages

High pitch noise when recording audio using internal mic

The issue I am having is with the internal mic. When recording audio using quicktime or garageband.It is a high pitch noise that stays whether i am speaking or not. The fix i found was to lower the input volume of the mic in system preferences. However, this causes my voice to be recorded so low that audio is barely usable unless volume is all the way up. Looking around the web I found this gem:
http://www.usingmac.com/2009/6/18/recording-speech-with-garageband-2009
This help me get rid of the high pitch noise for Garageband. The noise still there for Quicktime. Any ideas on how I can keep the same mic input volume with out having to listen to the high pitch noise?
Any help is appreciated.

Did you do the usual stuff, such as reset PRAM?
http://support.apple.com/kb/HT1379
There are some sound settings in PRAM, although I think it's only for sound output.
Also, as a test, I would create a new admin user account in System Preferences Accounts pane
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
Log out and log in to the new account (do not use Fast User Switching). In the new account, try recording something using QuickTime, and note if this problem recurs. If it does not, you have eliminated a few possible causes, such as a problem with the overall system installation or a hardware issue, and isolated the problem to something in your normal user account.

High Pitched Noise When Recording From iSight Camera

I apologize if this has been asked before. I did a search on here as well as with Google.
Whenever I record a video clip using the built in iSight camera I notice that there is a constant high-pitched noise embedded in the clip. You don't hear the noise during recording, and otherwise the audio is crystal clear during playback, but I can't seem to figure out what is causing this noise. Video clips I import into iMovie don't have this problem. Has anyone else experienced this problem? How can I prevent this from happening with future recordings?

Hello obsidianspider
I am sorry to report that you are one of about ten people who have posted here about audio noises during video recordings with MacBooks. I listened to your YouTube clip, and I believe you are hearing something. I can hear the muffled "thumping" of background noises being amplified because there is no voice or other close sound being recorded in your video, but my old ears do not hear anything high pitched in your video (or anywhere else for that matter.)
I am sure Apple is aware of the issue, but with so small a number reporting this issue among thousands of MacBooks sold, I understand why there is not yet a kBase technical article on this subject.
I expect that Apple searches its warranty & repair work for quality issues and trends, but, if you have not (and do not) contact Apple or your retailer for service on this issue, please report your problem via MacBook Feedback so Apple can accurately record the magnitude of this problem. Unlike posting in this user forum, "Feedback" reports go directly to Apple.
We users who post here have found no solution yet, so the problem appears to require professional service for resolution.
However, if you are willing to try a test, please post back and tell us whether video or movie clip recording applications other than Apple's give the same audio noise you hear when using iSight with iMovie. Apple's QuickTime Pro has already been tested and found to exhibit the problem.
If you have access to an external microphone that can be located away from your Mac while you record video, you could also test to see whether you are recording a physical sound coming from your Mac or electronic noise being produced within your Mac's circuitry.
If you want to read the suggestions we have offered for minimizing your audio noise in video recordings, take a look at the suggestions offered in Eemma's thread, which was the first to report this problem. The suggestions for minimizing noise start here:
http://discussions.apple.com/thread.jspa?messageID=4483866&#4483866
If you want to read what other users who experience this (or similar noise) problem, you can find them in these two threads:
http://discussions.apple.com/thread.jspa?threadID=972540
http://discussions.apple.com/thread.jspa?threadID=1136286
If you or any other reader finds a solution, please share it.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.10) G5 DP 1.8 w/Mac OS X (10.5) External iSight

I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button. What's wrong?

I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button and won't let me select an input for the audio track on the inspector panel. What are some possible solutions.

Certain M-Audio USB devices (along with some other USB2 class compliant devices that don't use drivers) no longer work with Logic Pro X 10.0.5
At this time it is unknown as to why this has happened. Nor is it known if Apple will need to fix it or if it is up to the Developers of said USB2 devices to remedy the problem.
In the mean time, assuming you made/could make backups prior to updating to 10.0.5.... the solution is to roll back to LPX 10.0.4...

ITunes high pitch noise when in full screen on 27" iMac11,1

Hello,
When running iTunes 10.5.1 in full screen mode on Lion 10.7.2, I get a faint, high pitch noise coming from my speakers. If I run iTunes in a refular window, the noise does not manifest itself. I can switch back and forth between one full screen app and iTunes, and the noise goes on and off and only manifests itself in iTunes.
Has anyone else experienced this?

I think I've found a workaround. The problem doesn't only happen in iTunes, but also in the Finder's list view when in full screen.
The workaround is to use Shades, a small utility that creates a uniform black color mask over my screen. All I had to do was set the brightness of my screen to 100%, run shades and lower the "brightness" using that utility to something comfortable for my eyes.
I think the issue comes from the high frequency flicker that the LED back light uses when the screen is being dimmed. For some reason, the speakers pick up on it when in list view... Why only list view? Beats me.
Anyway, the Shades prefpane can be downloaded from the following URL:
http://www.charcoaldesign.co.uk/shades
I hope this helps.
All the best!

X-fi Extreme Music - Mouse making high pitched noise when moved

? Whenever I move my mouse my headphones make a very high pitched noise. I moved my mouse to all usb ports and it still happens, cant change my IRQ in bios and vista has them all locked out from being changed. I also have my X-fi as far away as possible from my video card. I have no idea whats doing this but i need some help.
Specs are as follows
P5Q-PRO
Q6600 @ 3.48GHZ
4GB Mushkin @ 078
X-fi Extreme Music ***Lastest [email protected]

I've never had pictures of the mod, as it is it wouldn't show up vey well in a photograph, not to mention that every front panel board is different from one manufacturer to another. Mine came with my Gigabyte Aurora case, but Gigabyte probably didn't manufacture the circuit board itself.
I had the noise problem when I first tried out my new Bose headphones with it and knew I needed to fix it. The main issue is the metal mounting studs that attach the board to the case front cause a ground loop with the grounds coming in from the sound card, as well as the motherboard USB headers. Having all these grounds just connected together like that is the root of the problem. By far the worst issue is the studs being connected to the foils on the board. Scraping the foil off the board where it makes contact with the studs will probably fix most of the noise. Next, cutting a gap in the foils between the incoming grounds from the sound card and USB headers will clean up more noise. If properly done, and all plugs removed from their headers, there will be an OPEN connection between any one ground wire and another, as well as there will be an OPEN between the chassis (case) and any of the ground wires. The ground wires coming from the headers should show a good connection to their appropriate socket ground on the front panel, but again, an OPEN between each other.
Phil

To Apple Engineer. I hear a high pitch noise when surf flash-intesive sites

Hi. All.
I have a Aluminum PowerBook G4 1.25Ghz SD. I agree this is a great machine. It has a somewhat out-dated G4 Chip in it, I can do almost everything I need.
I've been using this powerbook for 2 years. Since sometime ago, I've heard very annoying "Hige Pitch Noise" from PowerBook. From further investigatin I found that this was a problem related to G4 CPU Processor throttling- so called "NAP" status. In Flash-intensive Web site, I clearly hear the noise.
According to solution suggested by talented apple user, I did followings.
1. Download or Install Developer Tools.
2. Download and Install CHUD tools from ftp://ftp.apple.com/developer/ToolC...ormancetools/
3. After installing chud tools, there maybe Processor pane in preference app.
4. In that processor pane, you should uncheck "Allow Nap" to reduce the notorius High Pitch Noise.(warning: it may increase the power consumption and temperature of CPU a bit, and of course you would see more frequent activities of CPU fan than before)
5. feel the silence.
To Apple.
I think this solution should be suggested from you not users.
Why we investigate, search the web for thosand of bucks PowerBook. Please fix this annoying(yes, annoying enough to cause headache) problem in next OS update.
To readers.
Sorry to my poor English(I live in Seoul, Korea)

These are user-to-user discussion boards. Apple employees do not take part in or respond to posts on these boards.

High pitch whine when recording audio & voiceover in iMovie

I have read other posts on similar issues but found no resolution
Issue:
When recording video in iMovie there is sometimes a high-pitched whine which renders the video useless.
The problem was intermittent ... annoying but I wokred around it by re-recording the video enough times to finally get a "clean" copy.
Now I am recording voice-overs for some clips and the awful whine is present in ALL the voice-overs.
I have tried the "trick" of using brighter light. No joy.
I have tried adjusting the microphone settings. No joy.
THis is an older macbook ... so I can't trade-in for a new one on warrantee.
Is Mac's internal microphone defective? I have read enough other people have similar issues to think this.
I am doing educational videos. My initial joy at being able to record a video on my macbook is changing to despair as I have wasted hours of time on tech problems like this.
Anyone have a real fix?
Is the built-in camera and mic just shoddy junk which doesn't work well?
Thank you

Did you do the usual stuff, such as reset PRAM?
http://support.apple.com/kb/HT1379
There are some sound settings in PRAM, although I think it's only for sound output.
Also, as a test, I would create a new admin user account in System Preferences Accounts pane
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
Log out and log in to the new account (do not use Fast User Switching). In the new account, try recording something using QuickTime, and note if this problem recurs. If it does not, you have eliminated a few possible causes, such as a problem with the overall system installation or a hardware issue, and isolated the problem to something in your normal user account.

High pitch ringing when recording voiceover

I just started getting a ringing when recording voiceovers. Any idea why?

I am using a Blue Snowball mic. I am also using Sony MDR-7502 headphones. There is a constant high pitch ringing.
In the past I've done voiceovers in FCP with this mic and no headphones without any problems. Since I tried to use the headphones (I bought them today) I'm getting the what I guess is feedback. Even when I unplug the headphones and plug the speakers in, as in previous set up, I am continuing to get feedback. (if this is feedback). This didnt happen before.
Any ideas? I've tried monitor on and off. Turned off my external hard drive. Checked automatic level control. I cant figure this out. I am new to setting up an evironment for recording other than my previous set up so maybe its something basic. You mentioned doorbells and phones. Does that mean nothing metal near the computer such nail clippers or hard drive? Do I need a shockmount? Is that the problem?

Logic 7 audio playing high pitched noise

Hi Discussion Group.
I am having some major difficulties with LP7.0.1 (downgraded frrom 7.2.2 and was working fine with 7.2.2) and the motu 828 mkII that just crept up on his system today.
An audible high pitched noise when playing logic after initially starting 10 seconds after first play. Also after stopping playback the high pitched sound lingers.
Logic complains of sync problems between audio and MIDI.
All music is heard fine with iTunes. there is no other audio software playing at the time of logic playback.
Nothing has changed on his system to create this. before today everything was working fine. We removed everything from the firewire bus and only the MOTU is present.
playing logic fine out the built-in audio just fine.
Changing the clock mode to autosync does not help and iTunes stops working. internal works fine. Also setting the I/O buffer size to 32, 64, 128, 256, and 512 and relaunching the driver each time did not help.
no MIDI card
Here are screen shots of his MOTU control panel and Logic Audio Drivers preferences
http://www.enabled.com/~noah/MOTU/
Any clues on what else to try? I am at a loss here.
cheers,
Noah

I've heard of weird things like this happening to 828's before.
There is a reset procedure, either in the manual or on the Motu website - try running that and seeing whether it fixes it.

Buzzing, humming, high pitched noise

I have been getting a buzzing, humming, high pitched noise when I load a clip of audio. Can't find what is causing it.
Soundtrack Pro 1.1

Hello AnnunakiChan,
Welcome to the HP Forums! I hope you enjoy your stay!
I understand that the computer is making a buzzing side. Normally, this is hardware related. I would seriously consider calling HP phone support for hardware support. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thanks for bringing this issue to the HP Forums. Have a great day!
Mario
I worked on behalf of HP.

P5800 making high pitch noises some times, and clicking noises (not so loud though)

hi, i bought the creative p5800 just recently and extended the cable wire by buying monster 6 guage speaker wire. anyways, sometimes it just makes high pitch noises when im not playing any sounds, and I was wondering if anyone could help me on that problem. thanks a lot.

MikeFar,
You will need to discuss the available option for repair with the respecti've region support. They'll be able to advise you in details.
Americas Customer Support
European Customer Support
Asia Customer Support
Jason

TAB S8-50 High Pitch Noise

please can anyone tell me if its normal for the Lenovo Tab S8-50 to have a buzzing noise (high pitch noise) when its in use (noise gets louder depending on the brightness and what is displayed on the screen)
i have just purchased the tablet today
Solved!
Go to Solution.

Hi fawcett
That's great....Can you mark your answer(...fixed my issue by updating the device...) as ''ACCEPT AS SOLUTION''.
It will help others facing the same issue.
Thank you for your contribution to the Lenovo community.
Cheers.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Airport Extreme - high pitched noise and no function

Hi all
My Airport extreme stopped working last night and just now emits a high pitched noise when the power is connected and there are no lights on the front (amber or green)
Has anyone else had this happen to them and is there any way to solve this without taking it back? Have only had this approximately 2 months.
Any help would be gratefully received!

Hi falloutphil,
When I bought my iMac, I had the store install more ram for me. It would restart all by itself. Then it would shut off. I can't remember a noise but after I was on the phone with apple tech, he wanted me to drop off the mac at a apple dealership. If you bought ram from someone else other than apple, it needs to be pushed in a little bit further. When you swing the two white thingys closed, push the ram in just a little bit. Before you do that, run the apple hardware test. I bought my iMac from JR's and when I reviewed the system log, the hardware test failed and they still sent it to me anyway. this just happened in July. My iMac has been running beautiful since then. but I will never buy anything from JR's store again.

A215-7422 Audio Issue: High-pitched noise

About 2 weeks ago, the audio would suddenly stop. After restarting the laptop, it would work fine again. This morning, however, the audio completely died. Restarting it only gave me a low frequency click upon start up. Updating the drivers and the system only made the laptop give off a high-pitched noise through the speakers that persists through turning the volumn down/off and plugging in headphones, on top of which it continues not to play an audio.

A quick update if it helps: I went in a disabled "High Definition Audio Device" and the high pitched noise from the speakers stopped. Not sure if that helps anyone.

High pitched noise when recording w/ M-Audio Producer USB Microphone

Similar Messages

Maybe you are looking for