High processor load after changing Metadata Rating on several photos

Hi,
I have marked about 100 Photos (Nikon RAW) which are in a selection, these have all 5 star rating, then I select 4 star rating for all selected.
After this I get high processor load for about 2 to 3 minutes.
What's goning on, does Aperture need soo many resources for just changing the rating in the Metadata in the Database?
JO

It's better in 1.5

Similar Messages

  • Hwmond high cpu load after 10.6.8 update

    hwmond is causing up to 70% cpu load after every reboot on several xserves i manage caused by the update to 10.6.8. anybody else having this problem? it can be solved by hwmond -s5 to set the hwmond interval to 5 seconds but this command is not processed properly, is causing an error message "IOConnectMethodScalarIScalra0 call return err = 0xE00002BC" and has to be exited with cmd+c. Also, the com.apple.hwmond.plist in LaunchDaemons is empty.

    In my case:
    I installed 10.6.8 via the Combo Update, was running 10.6.7 previous to this.
    /System/Library/LaunchDaemons/com.apple.hwmond.plist still exists and is not empty
    /etc/hwmond.SMART still exists and is not empty
    /etc/hwmond.conf didn't exist, so from Terminal.app I simply issued "sudo touch /etc/hwmond.conf"
    I tried:
    In Terminal.app, ran:sudo launchctl unload /System/Library/LaunchDaemons/com.apple.hwmond.plist
    Then, backed up /usr/sbin/hwmond and /System/Library/LaunchDaemons/com.apple.hwmond.plist
    From a Mac Pro running 10.6.7 Server, copied both the binary and the plist to the same spots on the Xserve, then, in Terminal.app, ran:sudo launchctl load /System/Library/LaunchDaemons/com.apple.hwmond.plist
    That didn't change a thing. hwmond still spiked.
    Put everything back the way it was.
    And:
    In Terminal.app, ran:sudo launchctl unload /System/Library/LaunchDaemons/com.apple.hwmond.plist
    Backed up /System/Library/LaunchDaemons/com.apple.hwmond.plist
    Made another copy to the Desktop
    Edited this copy and added a string in ProgramArguments with a value of "-S255", but this still caused hwmond to spike after putting this copy back in LaunchDaemons, repairing permissions, and loading the plist via launchctl again. Any valid value still caused it to spike. However my Xserve now reboots if I set the value to an invalid value, like "-s256". Then again this also caused com.apple.hwmond and com.apple.launchd to create entries in the system log complaining about the value with hwmond attempting to relaunch itself every 10 seconds:
    6/24/11 2:37:10 PM com.apple.hwmond[2697] hwmond: n should be 1 to 255 seconds
    6/24/11 2:37:10 PM com.apple.launchd[1] (com.apple.hwmond[2697]) Exited with exit code: 1
    6/24/11 2:37:10 PM          com.apple.launchd[1] (com.apple.hwmond) Throttling respawn: Will start in 10 seconds
    OP, Armin, did something similar, but I think he tried doing it directly in Terminal, not using launchctl / launchd, which caused the error he mentioned.
    Finally, added a "Disabled" item, with a boolean value of YES to the plist, recopied it, repaired permissions again (launchctl will complain and won't load the plist if you don't). This way hwmond is disabled, I can reboot my Xserve, and wait until Apple figures this out.
    Full com.apple.hwmond.plist on my Xserve looks like this now:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
              <key>Label</key>
              <string>com.apple.hwmond</string>
              <key>OnDemand</key>
              <false/>
              <key>Program</key>
              <string>/usr/sbin/hwmond</string>
              <key>ProgramArguments</key>
              <array>
                        <string>hwmond</string>
                        <string>-s255</string>
              </array>
              <key>ServiceIPC</key>
              <false/>
              <key>Disabled</key>
              <true/>
    </dict>
    </plist>
    Edit: I too have filed a bug report with a link to this thread included.
    Second Edit: Server Monitor.app still works after disabling hwmond via the plist even after a reboot.
    Third Edit: Sorry, keep remembering things, a modified /usr/sbin/hwmond was included the 10.6.8 Server Combo Update package, but not the Delta. Not sure if this matters. How has everyone updated to 10.6.8 so far? Like I mentioned, I used the Combo.

  • VI causes high CPU load after several days of running

    Hello,
    I have a strange problem. I have craeted a test bench control VI and it runs on five PCs, controling five test benches. All PCs have almost the same hardware, same motherboard, same CPU, etc.
    Normaly the CPU load is around 50% when I run the VI, but at one PC the CPU load climbs up to 85% after several days (maybe one week) of continuous running and the PC is almost tied up - the VI execution becomes very slow (10 times slower) and the mouse only moves very slowly.
    First I thought that the PC has a problem but the problem dissapears as soon as I stop and restart the VI!
    I don't even have to terminate LabVIEW - only my VI and then everything is okay again.
    The problem does not seem to occur at the other four PCs, but I can not tell for sure.
    The task manager says only LabVIEW causes the CPU load - swap file utilisation is little.
    Is there a way to analyze what causes the high CPU load?
    I Use LabVIEW 7.1 professional
    Operating System: Win XP (SP 2 or 3 I don't remember)
    P.S. I have no loops without wait-functions.
    Greetings Johannes
    Using LabVIEW 7.1 and 2009 recently
    Solved!
    Go to Solution.

    Do all PCs have the same amount of RAM?
    What is the memory use over time as seen by the windows taks manager. Does it increase gradually?
    An increase in resource usage if often cause by sloppy programming.
    Do you grow arrays forever or constantly resize arrays in memory? (built array, insert into array, delete from array)
    Do you often create new references and never close them?
    What does the program actually do? In my opinion, a constant 50% CPU load seems too high for my taste. It means it would not even be able to keep up on slightly older hardware.
    LabVIEW Champion . Do more with less code and in less time .

  • High processor load slows down wireless connection

    My wireless connection slows to a crawl when the CPU is being utilized more than 80% (average for both CPU cores).
    For example, if I have Safari and Quicktime open, web pages load very fast and the CPU load is less than 5%. When encoding a video in Quicktime, the processor load is around 85%, but web pages load very slowly in Safari (or any other browser). Ping times also increase considerably (from 25ms under low CPU load to 200-2000ms under heavy CPU load). As soon as the video is done encoding and the CPU load drops back down, web pages load fast again.
    This problems only seems to apply to AirPort connections. High CPU load does not appear to affect speeds when connected via Ethernet.
    Has anyone else experienced this?
    MacBook Pro 15" 2.33GHz/2GB/160GB/256MB   Mac OS X (10.4.9)  

    Has no one else experienced this? I can reproduce this problem consistently. Anything that utilizes the processor at least 40% slows down my wireless internet connection.

  • High CPU load after firefox 18.0 update, causing periodical hang

    Hi, I am basically getting crazy here after the update to firefox 18.0 yesterday.
    Firefox periodically causes very high CPU load, which makes it impossible to use.
    http://img805.imageshack.us/img805/702/firefox18.png
    The problem does not occur immediately after restart, but you can already see the spikes of CPU load in the taskmanager with a peak of ~4%. After a couple of minutes this will go up to almost 50% utilizing a whole core and causing the hangs.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • SeqEdit.exe goes to high cpu load after execution

    Hello,
    I am making a test sequence (in TestStand 2010), which uses a DLL to communicate (through TCP sockets) with a JAVA program.
    The execution of tests goes perfectly, with CPU load varying from approximatly 7% to 25%.
    However, after a short period of time (couple of seconds) when the tests are finished, the CPU load of SeqEdit.exe rises to 50%, and stays at that level..
    (Since I have a dual core PC, this means it confiscates an entire core).
    When I start another test, or close TestStand, the high level goes away.
    In the Cleanup section of the main sequence, I do (just to be sure) an extra "Unload all modules".
    I already tried reinstalling TestStand, that didn't fix the issues.
    Anyone any clue?
    Jeroen

    Hi,
    My guess is it's got soemthing to do with your code module. Have you tried one of the supplied examples, I believe there is a JAVA example, and do you see the same problems.
    Regards
    Ray Farmer

  • High CPU load after waking with Thunderbolt Display connected

    I have a Mid-2013 MacBook Air 13" with Apple Thunderbolt Display connected. I use this setup mostly in a clamshell mode. Recently I've updated to OS X Mavericks. After that I've noticed that one of the cores is occupied by kernel_task to 100% after waking up from sleep. I've managed to isolate that to Apple Thunderbolt Display connected, without display there is a short CPU spike, but it comes down to normal levels in a couple of seconds.
    I've tried resetting SMC to no success. MacBook doesn't enter Safe Mode either (progress bar goes up to approx. 30% and it goes to reboot). Probably it's because of the Thunderbolt Display, I'm not really sure.
    That's not really a problem as this load doen't seem to impact CPU temp (fans are not spinning faster) and more of a activity monitor display glitch (?).
    Does anyone here encounter this?

    Hey Max,
    I also have one CPU core on my Air'13 to run 100% after a wake-up for about 1 minute (kernel_task).
    It is annoyingly like this after I upgraded to Maverics. Notice, I don't have a Thunderbolt monitor, just a laptop, no periphery.

  • High CPU load after resuming from sleep mode

    When my laptop resumes from sleep mode, LabVIEW 2012 starts to generate a very high and always constant CPU load (25%) without any VI running. I need to close all front panels to get back to the usual <1% CPU load level.
    This behaviour spoils my carbon footprint and frequently eats up my battery. Any ideas what is causing this ?
    Thank you,
    Dirk

    I'm guessing your issue may be related to this:
    http://forums.ni.com/t5/LabVIEW/Why-is-using-100-of-a-CPU-1-out-of-8-when-it-does-nothing/m-p/242745...
    Dirk@LV wrote:
    This behaviour spoils my carbon footprint and frequently eats up my battery.
    Thank you,
    Dirk
    Sorry about your carbon footprint, NI has a lot to answer!
    Beginner? Try LabVIEW Basics
    Sharing bits of code? Try Snippets or LAVA Code Capture Tool
    Have you tried Quick Drop?, Visit QD Community.

  • Eclipse causes high cpu load after firefox update

    Hi,
    I have a strange problem after the latest firefox (and xulrunner) update (3.0.5.1 and 1.9.0.5-1). When I open firefox and afterwards eclipse, eclipse uses about 60% of the cpu after a short while; even if I don't do anything at all (and nothing gets compiled) in eclipse. But when I open firefox and eclipse in the reverse order, eclipse behaves normally again (like before the update).
    After a downgrade to xulrunner-1.9.0.4-1 and firefox-3.0.4-1 the execution order of both programms is irrelevant again.
    I assume this has something to do with java or maybe xulrunner?
    Thanks, for any help.
    Last edited by otti (2008-12-25 17:11:34)

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Cannot load after change of computer

    Hi.
    I moved overseas recently and took the opportunity to buy a
    laptop (macBook Pro) to replace my desktop that cost to much to
    move.
    I backed up everything so I could transfer it all over to my
    new laptop. That included my Dreamweaver 8 for Macs and my
    Photoshop CS2 for Mac. I have transferred all my applications over
    and ALL work except for these two.
    I left the orriginal disc at home but have my passwords. I
    get an error messsage saying "Please reinstall your software; A
    problem was detected with your application. Please reinstall this
    software to correct the problem".
    I am a genuine buyer, and my disc is half the world a way in
    storage. Am I stuck or can I simply configure my preferences or
    library so that I can use the software?
    Appreciate any help given.

    How did you "transfer it all over to my new laptop" ???
    I don't know about Mac, but in the Windoze world you can't
    just copy program folders and have anything work... you need to
    install from the disc so the correct entries are made in the
    Registry file

  • 8.01 processor load

    The new 8.01 seems to be more stable however the CPU meter runs along great (low load) for about 10 minutes then all of a sudden I get heavy CPU load and the odd cut out. Last night mainstage crashed completely during a gig. I basically using 1 EVB3 patch
    Has anyone experience heavy processor load after the software has been active for a 10 to 20 minutes
    I'm trying to see if I have a hardware problem or not
    JN

    I just recognized that all of a sudden Spotlight started indexing iCal files (found out in Konsole:
    22.12.07 00:26:58 mdworker[760] iCal.mdimporter: ignoring file </Users/Library/Application Support/iCal/Sources/1F2BE646-18F3-42B2-9D0C-66BA018AC293.calendar/corestorage. ics>)
    - and the fans started blowing. Had a look in Activity monitor and the processor load jumped up to 50%.
    That would be killing any hard activity with EVB3s.
    Maybe there is a way to deactivate Spotlight before a gig.
    00:26:58 is the right time to do maintenance for office workers but not for musicians.
    That's the time when the crowd should get hot, not the processor.

  • Bridge applies rating after modifying metadata

    Working in Bridge CS3, adding or modifying metadata with File > File Info, after I click okay on the metadata template the thumbnail shows a Label color that wasn't there before. If the file did already have a Label, the color is changed. How can I stop the Lable from being applied when I don't want one?
    - Greg

    Thanks, Omke. I just reset Bridge preferences (for the second time since this started happening), but a label is still applied as soon as the changed metadata (Description, Keywords, Copyright Status) shows in the Bridge panel.
    What's also strange is that at first the label was yellow, but after I changed the name of the yellow label, what gets automatically applied is a white label. I don't remember, but there's a good chance that this behavior started when I applied the yellow label to a file immediately before or after changing the metadata (and perhaps Bridge wasn't done processing whichever of those actions came first?).
    MacBookPro, 2.4 GHz Intel Core 2 Duo, 2 GB 667 MHz DDR2 SDRAM, OS-X 10.4.11, Bridge 2.1.1.9, Photoshop CS3 10.0.1. I also have InDesign CS3 running at the same time.
    I have a similar problem several on my PC (Intel Pentium 4, WinXP Pro SP3, Bridge 2.1.1.9, PSCS3), except that instead of a label, a 2-star rating is applied to the images. I asked about this several months ago on the Bridge Windows forum but nobody was able to solve the problem. I also tried trashing the Bridge prefs on this system, with no effect.
    Thanks for any suggestions.
    - Greg

  • Warning appears after changing the load properties of BW iview

    Hi,
       I get a warning "Object Expected" after changing the load property category of BW report iview.
    Allow Client-Side caching (BrowserOnly) <- (Yes)
    Cache Level (Session) <- (None)
       How to remove this warning message? This does not happen for webdynpro iviews.
    Thanks
    Sumathi

    Hi,
       This warning message is removed when Allow Client-Side caching is set to "Yes".
    Thanks
    Sumathi

  • BI 7 real-time cube load behavior changed after transport

    Dears,
      After I transported real-time cube from DEV to QA system, I found that all the real-time cube load behavior changed from 'can be loaded, planning not allowed' to 'can be planned, load not allowed'. What happened? Or I'm enpackaging this type cube with wrong step? Any suggestions are appreciated.
    Best regards,
    Gerald

    Hi,
    I think note 984803 can be usefull for you.
    The link is https://websmp207.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=984803&_NLANG=E
    Rgs
    Antonino

  • High CPU load and com.apple.ImageCaptureExtension2 crash after upgrade

    After upgrading my Macbook Air from Lion to Mountain Lion, the system has a very high cpu load, and the crash reporter is the process that causes thee high load. In the error log I see this entry several times per second:
    17.08.12 12:58:46,011 ReportCrash[5998]: com.apple.message.domain: com.apple.crashreporter.writereport.crash
    com.apple.message.signature: Image Capture Extension
    com.apple.message.signature2: com.apple.ImageCaptureExtension2 ||| 8.0 (8.0)
    com.apple.message.signature3: 03A96CBDA3C85A114383537BFC5C8999
    com.apple.message.result: NO
    com.apple.message.summarize: YES
    I investigated a bit more and recovered, that it has something to do with the printer drivers. When I remove all printers from setting, everything is fine. As soon as I add a printer (Brother MFC 9440CN printer/scanner, printer driver provided by Mountan Lion), the crash reporter starts it's work and the error log is full of those entries.
    Any suggestions?
    Thanks in advance,
    Marcus

    I did more exploration and found the cause of this, but I don't know how to fix it:
    I removed all Brother and Lexmark printer drivers and rebooted (and also tested with a virtual machine using 10.8.0 as guest os that never had any printer installed). As soon as I enter the printer settings and press the "+", the crashes begin, so it looked like the bonjour one of the printers announcing themselves via Bonjour were causing this.
    When watching a picture in the preview app the same happend. We have two multi function printers in our network, the already mentioned brother printer and a Lexmark X204N. Switching off the Lexmark (which wasn't installed on my Mac) solved the problem. Switching off the printer is no solution in our office (it's our fax device and main printer), but switching off mDNS on the Lexmark also solved it. But this can only be a workaround.
    Is this a known problem with Lexmark devices and Mountain Lion (it works fine with machines using Lion)? Are there any fixes known? It's just the Lexmark device announing itself via Bonjour that causes trouble, even if the driver is not installed.

Maybe you are looking for