High RAM use when logging in

For the last year or so I've noticed that a great deal of RAM has been marked as in use when I open Activity Monitor. I just upgraded to Mavericks hoping that the new memory compression feature would help alleviate this problem. However, logging in for the first time I saw that 3.8 GB of my 4GB was marked as in use. Now that I have Activity Monitor and Safari running it shows 3.96 as in use. I also run Dropbox and Adobe Creative Cloud, but those only take 60MB and 36MB respectively as I write this. Scrolling through the active processes I see a ton of things running. Does anyone have an idea on why so much RAM would be used up and what I can do to alleviate the problem? Thanks.

Since installing Mavericks I have never seen my RAM go below 3.5. Before it would max out at about 2-2.5 with the same programs open. So idk too much about Mavericks actually being less intensive on RAM or not.

Similar Messages

  • High memory use when checking downloads folder through browser

    High memory use when checking downloads folder through browser.
    I have a total of 3 DDR2 Gbytes of ram. Pentium(R) Dual-Core CPU T4500 @ 2.30GHz Win 7 home pr. 64bit. Firefox 27.0 beta
    I right click on a file to "open containing folder" from the drop down menu in downloads.
    When the folder has been opened, explorer is trying to index the folder (which it never does completely or well after 5 minutes I close the folder and shut down the dllhost process cause laptop is blazing hot) and memory keeps increasing till no more is available.
    I checked task manager and see that dllhost is the particular process that is causing the spike in memory usage even after closing the folder I right click and stop the process and memory is restored after awhile.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • In an AppleScript, can compression level high be used when saving an image as a JPEG?

    When using AppleScript to save a copy of an image file as a JPEG on OS X 10.6 Snow Leopard, can "compression level high" be used in the code, or can only "compression" be used?
    The part of the AppleScript dictionary for Image Events indicates that "compression level high", "compression level low", and "compression level medium" can be used, but when I type any of those three in the code and try to save the AppleScript file, the below error is displayed, and the word "level" is highlighted in the AppleScript Editor:
    Syntax Error
    Expected end of line, etc. but found identifier.
    -John

    you need to open the image in image events before you can save it as a different format.  you have to make a distinction between the image file (a file system object) and the image itself (the data that is the digital representation of the visual image).  what you want to do is open the image file in image events to extract the image data, then resave the image data in the new format.  looks something like this (changing just the last bit of your script):
    set theImage to choose file with prompt "Please select an image file:" of type "public.image"
    -- other stuff...
    tell application "Image Events"
              set theImageData to open theImage
      save theImageData in newPathToSave as JPEG with compression level high with icon
    end tell

  • High RAM usage when system is 'idle' (EtreCheck)

    Hey guys,
    First timer here. Ok here's my question :
    I recently bought a secondhand Macbook pro 15 inch. For me it's a huge upgrade coming from a 2009 13 inch Macbook pro. Because a friend of mine wants to buy my old one I was doing some diagnostics on the 13 inch, which has 4 GB of RAM, and found out it had a lot of inactive RAM usage and wired usage, almost 2 GB, due to a lot of launchdaemons etc which were hogging the RAM. I used terminal to kill these agents and deamons and now that system is running smooth again. Maybe it's wise to mention that the 13 inch runs on ML.
    3 days ago I did a clean Yosemite install on the 15 inch, swapped the HDD for a SSD. And already the activity monitor shows a whopping 4,28 GB of RAM usage while I'm typing this with just safari open. I thought I could do the same trick as I did with my 13 inch but it didn't help, had some java deamons and helpers and deleted those. In terminal I looked up everything via launchctl list and there's nothing unusual going on as far as I can see. I had VirtualBox for one day but uninstalled it using their uninstaller. I have no clue what's eating all this RAM.  Please help me out so I can be a proud owner of my second macbook for atleast 5 years to come. Thanks in advance.
    EtreCheck version: 2.1.8 (121)
    Report generated 15 februari 2015 08:45:30 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
        MacBook Pro - model: MacBookPro9,1
        1 2.6 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 685
    Video Information: ℹ️
        Intel HD Graphics 4000
            Color LCD 1680 x 1050
        NVIDIA GeForce GT 650M - VRAM: 1024 MB
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:52:24
    Disk Information: ℹ️
        Samsung SSD 840 EVO 500GB disk0 : (500,11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (457.96 GB free)
                Core Storage: disk0s2 499.25 GB Online
        HL-DT-ST DVDRW  GS31N 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Computer, Inc. IR Receiver
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Firewire Information: ℹ️
        Iomega eGo HDD 800mbit - 800mbit max
            disk2s1 (disk2s1) <not mounted> : 32 KB
            disk2s2 (disk2s2) <not mounted> : 29 KB
            disk2s3 (disk2s3) <not mounted> : 29 KB
            disk2s4 (disk2s4) <not mounted> : 29 KB
            disk2s5 (disk2s5) <not mounted> : 29 KB
            disk2s6 (disk2s6) <not mounted> : 262 KB
            disk2s7 (disk2s7) <not mounted> : 262 KB
            disk2s8 (disk2s8) <not mounted> : 262 KB
            Iomega_HDD (disk2s10) /Volumes/Iomega_HDD : 319.94 GB (30.10 GB free)
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [unknown]    com.oracle.java.Java-Updater 06.40.36.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [unknown]    com.oracle.java.Helper-Tool 07.05.30.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Programma  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        Default Browser: Version: 600 - SDK 10.10
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             4%    WindowServer
             1%    fontd
             0%    sysmond
             0%    AppleSpell
             0%    notifyd
    Top Processes by Memory: ℹ️
        198 MB    com.apple.WebKit.WebContent
        172 MB    Safari
        94 MB    mds_stores
        86 MB    WindowServer
        43 MB    Dock
    Virtual Memory Information: ℹ️
        4.07 GB    Free RAM
        2.79 GB    Active RAM
        816 MB    Inactive RAM
        904 MB    Wired RAM
        1.25 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Feb 15, 2015, 07:53:01 AM    Self test - passed
        Feb 12, 2015, 09:53:18 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Live_2015-02-12-095318_[redact ed].crash

    This machine has not run out of RAM.
    Virtual Memory Information: ℹ️
        4.07 GB    Free RAM
        2.79 GB    Active RAM
        816 MB    Inactive RAM
        904 MB    Wired RAM
        1.25 GB    Page-ins
        0 B    Page-outs
    The page outs indicate the OS has not recently swapped any memory to disk.
    Apple made changes to 10.9 that are the same on 10.10. Memory will be used as much as possible. It is the fastest storage on the system, keeping it free is a waste of your time - data loads fastest from RAM.
    This is a good explanation…
    http://arstechnica.com/apple/2013/10/os-x-10-9/17/#compressed-memory
    The system also frees 'cache' memory when another process has more need to use it. Eventually it will swap to disk (which is slow) so the OS also compresses memory before swapping is needed.
    Please avoid killing launchd jobs, many will simply restart or relaunch again later. Eventually you may kill one that hangs the OS & corrupts the disk via a forced shutdown.
    I do suspect you may see issues when RAM does get low, but there is no evidence of that here. The memory pressure graph will show red when swapping - every other colour is fine. Wait until you see red & then note the top memory users.
    If you don't want java installed you need to find removal instructions & get it all off the system, simply stopping the update checks will leave Java in an old state - terrible for security.
    Also do you know what 'Live' is? It crashed recently, if it keeps doing that it may be worth a look, however it may just be one if the things that was effects by the killing spree

  • High ram usage when loading high resolution images

    Hello,
    I'm wondering why Firefox almost hangs my system while opening high-resolution images like this one (save your data, you have been warned):
    http://minecraft.1favre.de/output.png
    While opening, it involves X process to use CPU and a lot of memory (it's freed shortly after loading the image). Other browsers don't do that. Moreover, other browsers don't do any problems with such images, they load it fast and efortless. I Have 2GB of RAM.
    Firefox memory usage: http://wklej.org/id/1027301/
    Konqueror memory usage: http://wklej.org/id/1027305/
    Opera memory usage: http://wklej.org/id/1027306/
    Chromium was problematic with getting the log: http://img.koci.net.pl/images/screen252.png
    Unfortunately I was unable to generate log with nvidia-bugreport.sh. Doesn't work, strange. Here are some details of my system:
    02:00.0 VGA compatible controller: NVIDIA Corporation G73 [GeForce 7300 GT] (rev a1)
    nvidia-settings: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:47 PDT 2013
    [root@linux mk]# uname -a
    Linux linux 3.8.10-1-ARCH #1 SMP PREEMPT Sat Apr 27 12:36:59 CEST 2013 x86_64 GNU/Linux
    root@linux mk]# X -version
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.8.7-1-ARCH x86_64
    Current Operating System: Linux linux 3.8.10-1-ARCH #1 SMP PREEMPT Sat Apr 27 12:36:59 CEST 2013 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9ddb4ac2-a9bf-44db-830c-9ba210ea6d12 ro quiet
    Build Date: 17 April 2013 02:37:06PM
    Current version of pixman: 0.28.2

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • High RAM use by Creative Cloud

    Creative Cloud starts an svchost.exe/Local Service process that consumes more than 1 GB of RAM.  Windows 7, home premium, 64 bit.
    I suspect this is related to font syncing.  I tried the beta font sync and this happened.  However, I have syncing turned off and it still happens.
    I do not want to use anything that consumes 1 GB or more of RAM unless it is under my control (such as Photoshop).  What can I do?

    Since installing Mavericks I have never seen my RAM go below 3.5. Before it would max out at about 2-2.5 with the same programs open. So idk too much about Mavericks actually being less intensive on RAM or not.

  • TS3430 high processor use when running iTunes

    Causes error message of high processor demand by "Apple Push". even when no activity in iTunes itself. unable to play music or open any other programs until I shut down iTunes.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • High ram consumption

    Hi,
    I've got an "imporant" memory issue since few weeks (2-3 maybe).
    I'm using xfce4 (compiz and conky), and until some updates (can't tell which and when exactly), the amount of ram used when no software is running as increased from 270/300mb to 700/800mb.
    I've found some similare stuff (https://bbs.archlinux.org/viewtopic.php?id=156106).
    Last updates (from this morning, including new xorg) didn't change anything.
    I can try to post some results from top or free if necessary.
    If you have any idea, i'm interested .
    Thx for reading/helping
    RS

    Are you getting any actual slowdown or poor performance?
    AFAIK Linux is supposed to keep stuff in RAM even if you've shut a program down.

  • MSI ge70 2OE, bad performance, a lot of RAM used

    Hello ! I have a problem with my computer. It's slow, even if I'm only on Firefox for instance. Even with no software opened, used RAM can be 30-40% in the task manager. I noticed that I have important Nonpaged pool and cache memory. Here are some pictures :
    http://i.imgur.com/4tsSKGS.png
    http://image.noelshack.com/fichiers/2013/47/1384805709-sans-titre.png (taken 1 or 2 days ago)
    Is this a memory leak ? And what are these service host ?
    In Starcraft 2, when I got the PC I could play with max settings and now I must play in low with 50-100 fps... Something is definitely wrong.
    It would be really nice if some of you could help me. Thank you

    Quote from: Kokoz on 23-November-13, 03:20:20
    Well I seriously doubt it. A 1200€ computer shouldn't be lagging on Firefox, or it's the biggest scam of the century. 40% RAM used when nothing is open is normal ? Moreover, the nonpagined pool is increasing with the time. I think it's a memory leak...
    And how do I check if the game is using the nvidia card ?
    My GT70 with 16 gigs of ram consistently is using 14.9 GB when I have Steam open with about 40 firefox tabs (most of them this forum actually). That is rather normal. Unused RAM is sort of a waste.
    If the laptop is feeling slow, the first thing I would do is get CPU-Z, CoreTemp, and MSI Afterburner. Make sure that all your temperatures are correct, and that the CPU is running at the proper frequency. It sounds like the system is being throttled because it's too hot to be perfectly honest.

  • Hello, I have a macbook pro late 2011 15 inch with 4 gb ram. My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Is there a fix?

    My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?

    when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Windows 7 x64 Pro, desktop GUI fails to display correctly, or crashes, when High RAM load, and even after. HW changed, same issue. Please Help.

    Hi Guys,
    I have have this horror issue with my PC. I have even changed the hardware configuration and the problem still persists. My PC fails to display the desktop correctly after using highly RAM intensive applications, especially Chrome, but even after getting
    the chance to close it, or waiting for it to crash by itself, the PC is still not able to display correctly the GUI, even on other browser/applications as shown in the screenshots. 
    1st Hardware Config:
    Intel Core2Quad Q9450
    4x2GB DDR2
    MSI P43 motherboard
    Ati Radeon x550 video card
    Software used, that seemed important for me to mention:
    NOD32 v4.2
    Comodo Firewall 5.12
    Chrome
    Screenshot Captor
    SpeedFan
    Other mentions:
    Aero is disabled, because I've considered that it's one of the causes.
    So, I've considered that it's a RAM issue or a videocard issue, and I've upgraded to:
    Intel Core i7 3770k
    4x8GB DDR3
    Asus P8Z77V-LX motherboard
    Intel GPU integrated in the 3770k CPU
    The problem just happened 2 times on this rig also, and the RAM was not even coming close to  it's maximum capacity of 31.7GB. It was at ~20GB's.
    Also, this is another videocard(Intel's integrated GPU), so we can exclude the videocard from the suspects.
    My suspects:
    1) some desktop manager bugs, or other similar issue
    2)  video memory allocation - I'm still suspecting that it can be caused by the amount of RAM dedicated to the videocard, currently, I think  that it is at 256MB.
    3) some poorly designed components of Chrome/Screenshot Captor - still very questionable since there are enough resources on this system, so there should be no fight over resources. And when the system is barely used there are no issues.
    4) Adobe Shockwave Flash - maybe this one????
    I have attached a set of 20 screenshots here, these were taken on the 1st configuration of my PC, using Q9450:
    http://imgur.com/a/Mc8hI#4
    Notice how it distorts the image by duplicating it and showing it in a smaller space, or how does it displays those black rectangles. In those moments, the PC is fully functional(the apps are running the background), without being slowish or something, but
    you can hardly control it like that. For example, I've tried to remove the mouse from the USB, and then I've insterted it back, the image was not displayed correctly, but the mouse was recognised instantly and the pointer was controlable.
    Same thing still happens on the new configuration. Please advise me.
    LE: OS is Windows 7 x64 SP1 Professional and it's Geniune. There is no cracked software on this PC. No games. I've tried to maintain it as clean as possible.

    Hi,
    First, please be ensured that you have installed the latest drivers and all the updates.
    Then check whether this issue will not in
    Safe Mode. If it didn’t occurred, I suggest you narrow down the cause in
    Clean Boot mode.
    In addition, try to create a new profile to see how it works.
    Hope this helps.
    Vincent Wang
    TechNet Community Support

  • I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show  Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?

    I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show  Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?
    and in system report >> hardware >> Graphics/Display >> it shows both grafics card listed.

    Some Mac's when the RAM is increased the Intel HD 3000 integrated graphics will bump itself up to the higher video RAM it takes, this seems to be what occured.
    It also means the dedicated graphics card will be used less, but only so slightly less.
    You obviously still should have both, you can test this by turning off Graphics Switching in Energy Saver, that will use the decicated AMD card all the time.
    You can also run Cinebench and compare the scores here
    Mac video card performance

  • Error when trying to use the Log Viewer

    Hello experts, today I wanted to examine some logs using the Log Viewer on Visual Administrator. However, when clicking on this service, the Visual Administrator would freeze for a long while and after that, an error message was displayed. I do not remember the exact message, but it was something like "A fatal error occurred. For more information, click on the Details button". After clicking on that button, the following error was displayed:
    com.sapmarkets.bam.util.BAMRuntimeException
    at com.sapmarkets.bam.jmx.connector.rmi.AbstractConnectorClient.invoke(AbstractConnectorClient.java:110)
    at $Proxy31.getAttribute(Unknown Source)
    at com.sapmarkets.bam.application.logdepot.AbstractLogDepot.getAttribute(AbstractLogDepot.java:236)
    at com.sapmarkets.bam.application.logdepot.AbstractLogDepot.getLogDescriptors(AbstractLogDepot.java:84)
    at com.sapmarkets.bam.view.config.RemoteViewConfiguration.initializeViewConfiguration(RemoteViewConfiguration.java:65)
    at com.sapmarkets.bam.view.overview.OverviewFacade.populateOverview(OverviewFacade.java:219)
    at com.sapmarkets.bam.view.AbstractLogViewerAppplication.populateOverview(AbstractLogViewerAppplication.java:171)
    at com.sapmarkets.bam.view.AbstractLogViewerAppplication.initOverview(AbstractLogViewerAppplication.java:652)
    at com.sapmarkets.bam.j2ee.services.logviewer.gui.LogViewerRuntimeLogical.setRuntime(LogViewerRuntimeLogical.java:121)
    at com.sapmarkets.bam.j2ee.services.logviewer.gui.LogViewerRuntimeLogical.show(LogViewerRuntimeLogical.java:88)
    at com.sap.engine.services.adminadapter.gui.node.ServiceNodeView.selectSingleService(ServiceNodeView.java:202)
    at com.sap.engine.services.adminadapter.gui.node.ServiceNodeView.selectNode(ServiceNodeView.java:156)
    at com.sap.engine.services.adminadapter.gui.AdminManager.selectServiceNode(AdminManager.java:290)
    at com.sap.engine.services.adminadapter.gui.AdminManager.selectNode(AdminManager.java:170)
    at com.sap.engine.services.adminadapter.gui.AdminManager.valueChanged(AdminManager.java:108)
    at javax.swing.JTree.fireValueChanged(JTree.java:2392)
    at javax.swing.JTree$TreeSelectionRedirector.valueChanged(JTree.java:2763)
    at javax.swing.tree.DefaultTreeSelectionModel.fireValueChanged(DefaultTreeSelectionModel.java:629)
    at javax.swing.tree.DefaultTreeSelectionModel.notifyPathChange(DefaultTreeSelectionModel.java:1076)
    at javax.swing.tree.DefaultTreeSelectionModel.setSelectionPaths(DefaultTreeSelectionModel.java:287)
    at javax.swing.JTree.setSelectionInterval(JTree.java:2041)
    at javax.swing.plaf.basic.BasicTreeUI$TreeIncrementAction.actionPerformed(BasicTreeUI.java:3268)
    at javax.swing.SwingUtilities.notifyAction(SwingUtilities.java:1530)
    at javax.swing.JComponent.processKeyBinding(JComponent.java:2438)
    at javax.swing.JComponent.processKeyBindings(JComponent.java:2473)
    at javax.swing.JComponent.processKeyEvent(JComponent.java:2401)
    at java.awt.Component.processEvent(Component.java:4978)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3684)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3546)
    at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1713)
    at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:627)
    at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:831)
    at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:741)
    at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:592)
    at java.awt.Component.dispatchEventImpl(Component.java:3575)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3546)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:480)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    Caused by: java.lang.reflect.InvocationTargetException
    at com.sapmarkets.bam.util.FutureResult.get(FutureResult.java:71)
    at com.sapmarkets.bam.jmx.connector.rmi.AbstractConnectorClient.invoke(AbstractConnectorClient.java:104)
    ... 45 more
    Caused by: java.lang.OutOfMemoryError: Java heap space
    at javax.management.ObjectName.construct(ObjectName.java:385)
    at javax.management.ObjectName.readObject(ObjectName.java:1063)
    at sun.reflect.GeneratedMethodAccessor60.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:838)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1736)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:322)
    at java.util.ArrayList.readObject(ArrayList.java:559)
    at sun.reflect.GeneratedMethodAccessor63.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:838)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1736)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:322)
    at java.util.HashMap.readObject(HashMap.java:1015)
    at sun.reflect.GeneratedMethodAccessor64.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:838)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1736)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
    at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1835)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1759)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1646)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:322)
    The lines I marked in bold are the ones that caught my attention. What is this error and how can I fix it?

    Hello, thanks for your answers. I checked the JVM Heap size, we are using a 64 bit HW, and it was already set to 2048M, as well as both parameters Xms and Xmx. I also checked our virtual memory and directory space, the virtual memory looks fine, and the <SID> directory uses 5 GB of space.
    If you wish, I can write the configuration found on the Config Tool, where you set the JVM Heap size and other parameters.

  • How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID promts the previously used email user IDs... Want to disable this feature---How can ot be done ?

    Question
    How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID prompts the previously used email user IDs... Want to disable this feature---How can it be done ?

    *Click the (empty) input field on the web page to open the drop down list
    *Highlight an entry in the drop down list
    *Press the Delete key (on Mac: Shift+Delete) to remove it.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    * Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    * Tools > Options > Privacy > History: "Remember search and form history"
    * https://support.mozilla.com/kb/Remembering+passwords
    * https://support.mozilla.com/kb/Form+autocomplete

  • RAM using higher after upgrade OS X 10.9

    RAM using higher after upgrade the OS X 10.9 in MacBook Pro 13 (2011).
    Still its using atleast 4GB RAM normally after the startup...!   then 2 -3 apps in use the it take more RAM 5.30Gb out of 8GB...!! 
    But Still Mac working Faster..
    Thanks

    Now I'm testing...    These all apps as same time...  RAM using 7.98 Gb out of 8GB
    But Mac Still FASTER>>>!!
    Mail
    Safari with 5 tabs
    Firefox with 5tabs
    Chrome with 5tabs
    iTunes
    iBooks
    Maps
    Calender
    PhotoBooth
    Preview
    iMovie
    iPhoto
    Activity Monitor
    uTorrent
    Skype
    Adobe Audition
    Final Cut Pro
    Awesome..!!

Maybe you are looking for

  • Data block wizard breaks master-detail

    I've encountered the following situation, and I'm wondering if it's a known bug or if I'm doing something wrong: 1. Open the data block wizard on an existing block that is the "detail" block of a master-detail relationship. 2. Add one new field to th

  • Search Help(F4 Help)  Advanced Input Help OVS

    Hi all, I need to understand how it works the OVS, regarding when the RFC for the value help is called. In the DoInit() of the view we got IWDAttributeInfo[] ovsStartUpAttributes = wdContext.nodeFlightInput() .getNodeInfo() .getAttribute("airlineid")

  • Errors While Stating the Weblogic Admin Server

    We are getting the following errors in many Jsps while accessing the content in BEA Weblogic Portal 8.5 SP5 in the Unix Environemnt. However we are not getting the error in the Windows Environemnt. These Errors are Poping up while starting the server

  • Can I upgrade from a CS5 Student Edition (PC) to CS6 Mac?

    Hi, quick question: Some time ago I bought CS5 (student edition) for my PC. I've never opened the box, so it's uninstalled. I'm getting a mac (it arrived today actually) and I'd like to be able to install photoshop on this. Since it's a different pla

  • Browsers crash when connecting

    Hi there, Whenever I try to open a meeting, my browsers (IE, Firefox, Opera) crash with an error "Acrobat Connect Add-in 7.0 r454 has encountered a problem and needs to close" The only reference I found in the Adobe support is related to uninstalling